Ta/NiFe/nonmagnetic metal spacer/FeMn films were prepared by magnetron sputtering. The dependences of the exchange coupling field (Hex) between an antiferromagnetic FeMn layer and a ferromagnetic NiFe layer on the thi...Ta/NiFe/nonmagnetic metal spacer/FeMn films were prepared by magnetron sputtering. The dependences of the exchange coupling field (Hex) between an antiferromagnetic FeMn layer and a ferromagnetic NiFe layer on the thickness of nonmagnetic metal spacer layers were system-atically studied. The results show that the Hex dramatically decreases with the increase in the thicknesses of Bi and Ag spacer layers. However, it gradually decreases with the increase in the thickness of a Cu spacer layer. For a Cu space layer, its crystalline structure is the same as that of NiFe and the lattice parameters of them are close to each other. The Cu layer and FeMn layer will epitaxially grow on the NiFe layer in succession, so the (111) texture of the FeMn layer will not be damaged. As a result, the Hex gradually decreases with the deposition thickness of a Cu layer. For an Ag space layer, its crystalline structure is the same as that of NiFe, but its lattice parameter is very different from that of NiFe. Thus, neither an Ag nor an FeMn layer will epitaxially grow on the NiFe layer and the (111) texture of the FeMn layer will be damaged. The Hex rapidly decreases with the increase in the deposition thickness of an Ag layer. For a Bi spacer layer, not only its crystalline structure but also its lattice parameter is greatly different from that of NiFe. For the same reason, the Bi and FeMn layer cannot epitaxially grow on the NiFe layer. The texture of the FeMn layer will also be damaged. Therefore, the Hex rapidly decreases with the increase in the deposition thick-ness of a Bi layer as well. However, the research result of X-ray photoelectron spectroscopy indi-cates that a very small amount of surfactant Bi atoms will migrate to the FeMn layer surface when they are deposited on the NiFe/FeMn interface. Thus, the Hex will hardly decrease.展开更多
Aim: Intervertebral spacers for anterior spine fusion are made of different materials, such as titanium, carbon or cobalt-chrome, which can affect the post- fusion MRI scans. Implant-related susceptibility artifacts c...Aim: Intervertebral spacers for anterior spine fusion are made of different materials, such as titanium, carbon or cobalt-chrome, which can affect the post- fusion MRI scans. Implant-related susceptibility artifacts can decrease the quality of MRI scans, thwar- ting proper evaluation. This cadaver study aimed to demonstrate the extent that implant-related MRI artifacting affects the post-fusion evaluation of intervertebral spacers. Methods: In a cadaveric porcine spine, we evaluated the post-implantation MRI scans of 2 metallic intervertebral spacers (TiAL6V4, CoCrMo) that differed in shape, material, surface qualities and implantation technique. A spacer made of human cortical bone was used as a control. The median sagittal MRI slice was divided into 12 regions of interest (ROI). Results: No significant differences were found on 15 different MRI sequences read independently by an interobserver-validated team of specialists (P>0.05). Artifact-affected image quality was rated on a score of 0-1-2. A maximum score of 24 points (100%) was possible. Turbo spin echo sequences produced the best scores for all spacers and the control. Only the control achieved a score of 100%. The titanium and cobalt-chrome spacers scored 62.5% and 50%, respectively. Conclusions: Our scoring system allowed us to create an implant-related rank- ing of MRI scan quality in reference to the control that was independent of artifact dimensions. Even with turbo spin echo sequences, the susceptibility artifacts produced by the metallic spacers showed a high degree of variability. Despite optimum sequen- cing, implant design and material are relevant factors in MRI artifacting.展开更多
An improved structure of silicon carbide metal-semiconductor field-effect transistors （MESFET） is proposed for high power microwave applications. Numerical models for the physical and electrical mechanisms of the de...An improved structure of silicon carbide metal-semiconductor field-effect transistors （MESFET） is proposed for high power microwave applications. Numerical models for the physical and electrical mechanisms of the device are presented, and the static and dynamic electrical performances are analysed. By comparison with the conventional structure, the proposed structure exhibits a superior frequency response while possessing better DC characteristics. A p-type spacer layer, inserted between the oxide and the channel, is shown to suppress the surface trap effect and improve the distribution of the electric field at the gate edge. Meanwhile, a lightly doped n-type buffer layer under the gate reduces depletion in the channel, resulting in an increase in the output current and a reduction in the gate-capacitance. The structural parameter dependences of the device performance are discussed, and an optimized design is obtained. The results show that the maximum saturation current density of 325 mA/mm is yielded, compared with 182 mA/mm for conventional MESFETs under the condition that the breakdown voltage of the proposed MESFET is larger than that of the conventional MESFET, leading to an increase of 79% in the output power density. In addition, improvements of 27% cut-off frequency and 28% maximum oscillation frequency are achieved compared with a conventional MESFET, respectively.展开更多
Titanium(Ti)and nickel(Ni)elemental powders were blended by ball milling and the ball milled powders were employed to fabricate TiNi shape memory alloy(SMA)foams by spacer sintering.Effect of ball milling time on phas...Titanium(Ti)and nickel(Ni)elemental powders were blended by ball milling and the ball milled powders were employed to fabricate TiNi shape memory alloy(SMA)foams by spacer sintering.Effect of ball milling time on phase constitutes of the sintered TiNi alloy foams was studied by X-ray diffraction(XRD)analysis.Scanning electron microscopy(SEM)was used to characterize the porous structure,and compressive tests were carried out to evaluate the mechanical properties of the foams.Results indicate that porosities of the TiNi alloy foams can be controlled by using the spacer sintering method,and the porosities show a significant effect on the mechanical properties and shape memory effect(SME).展开更多
Introduction: According to anterior spine fusion intervertebral disc spacers made of titanium or cobalt-chromium al-loys are of special interest. With regard to postoperative problems implant related artifacts can lea...Introduction: According to anterior spine fusion intervertebral disc spacers made of titanium or cobalt-chromium al-loys are of special interest. With regard to postoperative problems implant related artifacts can lead to a decreased MRI evaluation. The focus of this study was to compare the respective implant artifact artifact range dependend on different MRI sequences. To simplify artifact evaluation we introduced in this study a new developed 0-1-2 score. Material and Methods: We performed an MRI artifact evaluation of 2 different metallic intervertebral disc spacers (cobalt-chromium and titanium alloy). A carcass porcine spine was employed. Considering 12 defined spinal regions of interest we evaluated the respective implant artifact properties independent from the total artifact volume by using a new developed 0-1-2 score. The artifact range was documented for 15 different MRI-sequences. Results: For the titanium spacer as well as the cobalt-chromium-spacer an MRI evaluation of the implant/disc space situation could not be carried out. In contrast to the cobalt chromium spacer the titanium spacer allowed a good differentiation of the spinal canal opposite to the implant. Optimal MRI imaging results for both metallic intervertebral disc spacers could be achieved considering TSE sequences. Conclusion: A comparison of these two metallic spacers showed in all examined sequences clear advantages in favour of the titanium spacer. The best MRI representation of both tested implants by reducing implant related artifacts could be achieved with fast spin echo (TSE-) sequences. In spite of the use of TSE sequences a variability of susceptibility artifacts has to be included with regard to implant shape and material. With regard to the results of this study the easy use of a new developed artifact score represented a useful help to compare implant related MRI artifact properties independent from the actual implant related total artifact volume.展开更多
Two kinds of new chelating resins containing heterocyclic functional group(1-amino-5-methylthio-1,3,4-thia-dizole) were synthesized from macroporous chloromethylated polystyrene.Their structures were characfterized by...Two kinds of new chelating resins containing heterocyclic functional group(1-amino-5-methylthio-1,3,4-thia-dizole) were synthesized from macroporous chloromethylated polystyrene.Their structures were characfterized by elemental analysisand infrared spectra.Their adsorption properties for Cu2 +,Pb2 +,Ni2 +,Zn2 +,Ag+and Hg2 +had been studied.The results showthatthe newly synthesized resins have highly selective for Ag+and Hg2 +and the resin has no affinity for Cu2 +、Pb2 +and Ni2 +.The in-troduction of hydrophilic polyvinyl alcohol spacer arm can increase the adsorption capacity and the length of spacer arm has effecton the adsorption capacities.展开更多
基金This work was supported by the National Natural Science Foundation of China(Grant No.50271007)the Natural Science Foundation of Beijing(Grant No.2012011).
文摘Ta/NiFe/nonmagnetic metal spacer/FeMn films were prepared by magnetron sputtering. The dependences of the exchange coupling field (Hex) between an antiferromagnetic FeMn layer and a ferromagnetic NiFe layer on the thickness of nonmagnetic metal spacer layers were system-atically studied. The results show that the Hex dramatically decreases with the increase in the thicknesses of Bi and Ag spacer layers. However, it gradually decreases with the increase in the thickness of a Cu spacer layer. For a Cu space layer, its crystalline structure is the same as that of NiFe and the lattice parameters of them are close to each other. The Cu layer and FeMn layer will epitaxially grow on the NiFe layer in succession, so the (111) texture of the FeMn layer will not be damaged. As a result, the Hex gradually decreases with the deposition thickness of a Cu layer. For an Ag space layer, its crystalline structure is the same as that of NiFe, but its lattice parameter is very different from that of NiFe. Thus, neither an Ag nor an FeMn layer will epitaxially grow on the NiFe layer and the (111) texture of the FeMn layer will be damaged. The Hex rapidly decreases with the increase in the deposition thickness of an Ag layer. For a Bi spacer layer, not only its crystalline structure but also its lattice parameter is greatly different from that of NiFe. For the same reason, the Bi and FeMn layer cannot epitaxially grow on the NiFe layer. The texture of the FeMn layer will also be damaged. Therefore, the Hex rapidly decreases with the increase in the deposition thick-ness of a Bi layer as well. However, the research result of X-ray photoelectron spectroscopy indi-cates that a very small amount of surfactant Bi atoms will migrate to the FeMn layer surface when they are deposited on the NiFe/FeMn interface. Thus, the Hex will hardly decrease.
文摘Aim: Intervertebral spacers for anterior spine fusion are made of different materials, such as titanium, carbon or cobalt-chrome, which can affect the post- fusion MRI scans. Implant-related susceptibility artifacts can decrease the quality of MRI scans, thwar- ting proper evaluation. This cadaver study aimed to demonstrate the extent that implant-related MRI artifacting affects the post-fusion evaluation of intervertebral spacers. Methods: In a cadaveric porcine spine, we evaluated the post-implantation MRI scans of 2 metallic intervertebral spacers (TiAL6V4, CoCrMo) that differed in shape, material, surface qualities and implantation technique. A spacer made of human cortical bone was used as a control. The median sagittal MRI slice was divided into 12 regions of interest (ROI). Results: No significant differences were found on 15 different MRI sequences read independently by an interobserver-validated team of specialists (P>0.05). Artifact-affected image quality was rated on a score of 0-1-2. A maximum score of 24 points (100%) was possible. Turbo spin echo sequences produced the best scores for all spacers and the control. Only the control achieved a score of 100%. The titanium and cobalt-chrome spacers scored 62.5% and 50%, respectively. Conclusions: Our scoring system allowed us to create an implant-related rank- ing of MRI scan quality in reference to the control that was independent of artifact dimensions. Even with turbo spin echo sequences, the susceptibility artifacts produced by the metallic spacers showed a high degree of variability. Despite optimum sequen- cing, implant design and material are relevant factors in MRI artifacting.
基金Project supported by the National Science Fund for Distinguished Young Scholars of China(Grant No.60725415)the National Natural Science Foundation of China(Grant No.60606006)the Pre-research Foundation of China(Grant No.51308030201)
文摘An improved structure of silicon carbide metal-semiconductor field-effect transistors （MESFET） is proposed for high power microwave applications. Numerical models for the physical and electrical mechanisms of the device are presented, and the static and dynamic electrical performances are analysed. By comparison with the conventional structure, the proposed structure exhibits a superior frequency response while possessing better DC characteristics. A p-type spacer layer, inserted between the oxide and the channel, is shown to suppress the surface trap effect and improve the distribution of the electric field at the gate edge. Meanwhile, a lightly doped n-type buffer layer under the gate reduces depletion in the channel, resulting in an increase in the output current and a reduction in the gate-capacitance. The structural parameter dependences of the device performance are discussed, and an optimized design is obtained. The results show that the maximum saturation current density of 325 mA/mm is yielded, compared with 182 mA/mm for conventional MESFETs under the condition that the breakdown voltage of the proposed MESFET is larger than that of the conventional MESFET, leading to an increase of 79% in the output power density. In addition, improvements of 27% cut-off frequency and 28% maximum oscillation frequency are achieved compared with a conventional MESFET, respectively.
文摘Titanium(Ti)and nickel(Ni)elemental powders were blended by ball milling and the ball milled powders were employed to fabricate TiNi shape memory alloy(SMA)foams by spacer sintering.Effect of ball milling time on phase constitutes of the sintered TiNi alloy foams was studied by X-ray diffraction(XRD)analysis.Scanning electron microscopy(SEM)was used to characterize the porous structure,and compressive tests were carried out to evaluate the mechanical properties of the foams.Results indicate that porosities of the TiNi alloy foams can be controlled by using the spacer sintering method,and the porosities show a significant effect on the mechanical properties and shape memory effect(SME).
文摘Introduction: According to anterior spine fusion intervertebral disc spacers made of titanium or cobalt-chromium al-loys are of special interest. With regard to postoperative problems implant related artifacts can lead to a decreased MRI evaluation. The focus of this study was to compare the respective implant artifact artifact range dependend on different MRI sequences. To simplify artifact evaluation we introduced in this study a new developed 0-1-2 score. Material and Methods: We performed an MRI artifact evaluation of 2 different metallic intervertebral disc spacers (cobalt-chromium and titanium alloy). A carcass porcine spine was employed. Considering 12 defined spinal regions of interest we evaluated the respective implant artifact properties independent from the total artifact volume by using a new developed 0-1-2 score. The artifact range was documented for 15 different MRI-sequences. Results: For the titanium spacer as well as the cobalt-chromium-spacer an MRI evaluation of the implant/disc space situation could not be carried out. In contrast to the cobalt chromium spacer the titanium spacer allowed a good differentiation of the spinal canal opposite to the implant. Optimal MRI imaging results for both metallic intervertebral disc spacers could be achieved considering TSE sequences. Conclusion: A comparison of these two metallic spacers showed in all examined sequences clear advantages in favour of the titanium spacer. The best MRI representation of both tested implants by reducing implant related artifacts could be achieved with fast spin echo (TSE-) sequences. In spite of the use of TSE sequences a variability of susceptibility artifacts has to be included with regard to implant shape and material. With regard to the results of this study the easy use of a new developed artifact score represented a useful help to compare implant related MRI artifact properties independent from the actual implant related total artifact volume.
文摘Two kinds of new chelating resins containing heterocyclic functional group(1-amino-5-methylthio-1,3,4-thia-dizole) were synthesized from macroporous chloromethylated polystyrene.Their structures were characfterized by elemental analysisand infrared spectra.Their adsorption properties for Cu2 +,Pb2 +,Ni2 +,Zn2 +,Ag+and Hg2 +had been studied.The results showthatthe newly synthesized resins have highly selective for Ag+and Hg2 +and the resin has no affinity for Cu2 +、Pb2 +and Ni2 +.The in-troduction of hydrophilic polyvinyl alcohol spacer arm can increase the adsorption capacity and the length of spacer arm has effecton the adsorption capacities.
