Recent advances and perspectives of metal/covalent-organic frameworks in metal-air batteries

Metal-air batteries(MABs)have attracted considerable attention as a novel energy technology that can alleviate the severe energy crisis and environmental pollution.Two primary processes,including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)occur on the air cathode and dominate the battery performance during battery charging and discharging.Recently,metal-organic frameworks(MOFs)and covalent-organic frameworks(COFs)emerge as promising cathode catalysts due to their structure and composition superiority.The unique characteristics of MOFs and COFs contribute to improved performance.This review mainly summarizes the recent applications of MOFs and COFs in a series of MABs,mainly including lithium-and zinc-air batteries.Additionally,some critical issues are emphasized regarding MOFs and COFs used in other MABs limited progress,their fabrication and alternatives to potential problems.

Pressure effects on metal/covalent-organic frameworks:structural and optical properties

Metal-organic frameworks(MOFs)and covalent organic frameworks(COFs)with highly ordered porous structure,tunable bandgap,large specific surface area and structural diversity,provide an appealing platform for the development of stimulus response,sensing,imaging and optoelectronics.Among various tuning methods,pressure engineering using the diamond anvil cell is a highly powerful in-situ technique,which can efficiently modulate the structural and optical properties of MOFs/COFs.This is beyond the realization of traditional chemical methods.This review outlines the research progress in the experimentoriented discovery of new phases or unique properties under high pressure,including phase transition,abnormal compression,photoluminescence(PL)discoloration and enhancement.Notably,the improvement of PL quantum yield in MOFs could be achieved by pressure-treated engineering and hydrogen-bonding cooperativity effect.We also propose and establish the relationship between structure and optical properties under high pressure.Finally,the challenge and outlook of the current fields are summarized.We hope that this review will supply guidance for comprehending the development of high-pressure MOF/COF-related research fields,and offer novel strategies for designing more high-performance MOF/COF materials to ultimately expand their applications.

Efficient proton conduction in porous and crystalline covalent-organic frameworks(COFs)

To attain the objectives of carbon peaking and carbon neutrality,the development of stable and highperformance ion-conducting materials holds enormous relevance in various energy storage and conversion devices.Particularly,crystalline porous materials possessing built-in ordered nanochannels exhibit remarkable superiority in comprehending the ion transfer mechanisms with precision.In this regard,covalent organic frameworks(COFs)are highly regarded as a promising alternative due to their preeminent structural tunability,accessible well-defined pores,and excellent thermal/chemical stability under hydrous/anhydrous conditions.By the availability of organic units and the diversity of topologies and connections,advances in COFs have been increasing rapidly over the last decade and they have emerged as a new field of proton-conducting materials.Therefore,a comprehensive summary and discussion are urgently needed to provide an"at a glance"understanding of the prospects and challenges in the development of proton-conducting COFs.In this review,we target a comprehensive review of COFs in the field of proton conductivity from the aspects of design strategies,the proton conducting mechanism/features,the relationships of structure-function,and the application of research.The relevant content of theoretical simulation,advanced structural characterizations,prospects,and challenges are also presented elaborately and critically.More importantly,we sincerely hope that this progress report will form a consistent view of this field and provide inspiration for future research.

Effect of metal catalyst on the mechanism of hydrogen spillover in three-dimensional covalent-organic frameworks

Hydrogen spillover mechanism of metal-supported covalent-organic frameworks COF-105 is investigated by means of the density functional theory, and the effects of metal catalysts M_4（Pt_4, Pd_4, and Ni_4） on the whole spillover process are systematically analyzed. These three metal catalysts exhibit several similar phenomena：（i） they prefer to deposit on the tetra（_4-dihydroxyborylphenyl） silane（TBPS） cluster with surface-contacted configuration;（ii） only the H atoms at the bridge site can migrate to 2,3,6,7,10,11-hexahydroxy triphenylene（HHTP） and TBPS surfaces, and the migration process is an endothermic reaction and not stable;（iii） the introduction of M_4 catalyst can greatly reduce the diffusion energy barrier of H atoms, which makes it easier for the H atoms to diffuse on the substrate surface. Differently, all of the H2 molecules spontaneously dissociate into H atoms onto Pt_4 and Pd_4clusters. However, the adsorbed H2 molecules on Ni_4 cluster show two types of adsorption states： one activated state with stretched H–H bond length of 0.88 ？A via the Kubas interaction and five dissociated states with separated hydrogen atoms. Among all the M_4 catalysts, the orders of the binding energy of M_4 deposited on the substrate and average chemisorption energy per H2 molecule are Pt_4〉Ni_4〉Pd_4. On the contrary, the orders of the migration and diffusion barriers of H atoms are Pt_4

Three-dimensional porous bimetallic metal–organic framework/gelatin aerogels: A readily recyclable peroxymonosulfate activator for efficient and continuous organic dye removal

As promising catalysts for the degradation of organic pollutants,metal–organic frameworks(MOFs)often face limitations due to the particle agglomeration and challenging recovery in liquid-catalysis application,stemming from their powdery nature.Engineering macroscopic structures from pulverous MOF is thus of great importance for broadening their practical applications.In this study,three-dimensional porous MOF aerogel catalysts were successfully fabricated for degrading organic dyes by activating peroxymonosulfate(PMS).MOF/gelatin aerogel(MOF/GA)catalysts were prepared by directly integrating bimetallic FeCo-BDC with gelatin solutions,followed by freeze-drying and low-temperature calcination.The FeCo-BDC-0.15/GA/PMS system exhibited remarkable performance in degrading various organic dyes,eliminating 99.2%of rhodamine B within a mere 5 min.Compared to the GA/PMS system,there was over a 300-fold increase in the reaction rate constant.Remarkably,high removal efficiency was maintained across varying conditions,including different solution pH,co-existing inorganic anions,and natural water matrices.Radical trapping experiments and electron paramagnetic resonance analysis revealed that the degradation involved radical(SO_(4)^(-)·)and non-radical routes(^(1)O_(2)),of which ^(1)O_(2) was dominant.Furthermore,even after a continuous 400-min reaction in a fixed-bed reactor at a liquid hourly space velocity of 27 h^(-1),the FeCo-BDC/GA composite sustained a degradation efficiency exceeding 98.7%.This work presents highly active MOF-gelatin aerogels for dye degradation and expands the potential for their large-scale,continuous treatment application in organic dye wastewater management.

Metal-Organic Framework Enabling Poly(Vinylidene Fluoride)-Based Polymer Electrolyte for Dendrite-Free and Long-Lifespan Sodium Metal Batteries

Sodium dentrite formed by uneven plating/stripping can reduce the utilization of active sodium with poor cyclic stability and,more importantly,cause internal short circuit and lead to thermal runaway and fire.Therefore,sodium dendrites and their related problems seriously hinder the practical application of sodium metal batteries(SMBs).Herein,a design concept for the incorporation of metal-organic framework(MOF)in polymer matrix(polyvinylidene fluoride-hexafluoropropylene)is practiced to prepare a novel gel polymer electrolyte(PH@MOF polymer-based electrolyte[GPE])and thus to achieve high-performance SMBs.The addition of the MOF particles can not only reduce the movement hindrance of polymer chains to promote the transfer of Na^(+)but also anchor anions by virtue of their negative charge to reduce polarization during electrochemical reaction.A stable cycling performance with tiny overpotential for over 800 h at a current density of 5 mA cm^(-2)with areal capacity of 5 mA h cm^(-2)is achieved by symmetric cells based on the resulted GPE while the Na_(3)V_(2)O_(2)(PO_(4))_(2)F@rGO(NVOPF)|PH@MOF|Nacell also displays impressive specific cycling capacity(113.3 mA h g^(-1)at 1 C)and rate capability with considerable capacity retention.

Nanoengineering Metal–Organic Frameworks and Derivatives for Electrosynthesis of Ammonia

Electrocatalytic synthesis under mild conditions has become increasingly important as one of the practical alternatives for industrial applications,especially for the green ammonia(NH_(3))industry.A properly engineered electrocatalyst plays a vital role in the realization of superior catalytic performance.Among various types of promising nanomaterials,metal–organic frameworks(MOFs)are competitive candidates for developing efficient electrocatalytic NH_(3) synthesis from simple nitrogen-containing molecules or ions,such as N_(2) and NO_(3)^(−).In this review,recent advances in the development of electrocatalysts derived from MOFs for the electrosynthesis of NH_(3) are collected,categorized,and discussed,including their application in the N_(2) reduction reaction(NRR)and the NO_(3)^(−)reduction reaction(NO3RR).Firstly,the fundamental principles are illustrated,such as plausible mechanisms of NH_(3) generation from N_(2) and NO_(3)^(−),the apparatus of corresponding electrocatalysis,parameters for evaluation of reaction efficiency,and detection methods of yielding NH_(3).Then,the electrocatalysts for NRR processes are discussed in detail,including pristine MOFs,MOF-hybrids,MOF-derived N-doped porous carbons,single atomic catalysts from pyrolysis of MOFs,and other MOF-related materials.Subsequently,MOF-related NO3RR processes are also listed and discussed.Finally,the existing challenges and prospects for the rational design and fabrication of electrocatalysts from MOFs for electrochemical NH_(3) synthesis are presented,such as the evolution of investigation methods with artificial intelligence,innovation in synthetic methods of MOF-related catalysts,advancement of characterization techniques,and extended electrocatalytic reactions.

Imide-pillared covalent organic framework protective films as stable zinc ion-conducting interphases for dendrite-free Zn metal anodes

The notorious growth of zinc dendrite and the water-induced corrosion of zinc metal anodes(ZMAs)restrict the practical development of aqueous zinc ion batteries(AZIBs).In this work,a zinc metallized,imide-pillared covalent organic framework(ZPC)protective film has been engineered as a stable Zn^(2+)ion-conducting interphase to modulate interfacial kinetics and suppress side reactions for ZMAs.Compared to bare Zn,ZPC@Zn exhibits a higher Zn^(2+)ionic conductivity,a larger Zn^(2+)transference number,a lower electronic conductivity,a smaller desolvation activation energy and correspondingly a significant suppression of corrosion,hydrogen evolution and Zn dendrites.Impressively,the ZPC@Zn||ZPC@Zn symmetric cell obtains a cycling lifespan over 3000 h under 5 mA cm^(-2)for 1 mA h cm^(-2).The ZPC@Zn||NH_(4)V_(4)O_(10)coin-type full battery delivers a specific capacity of 195.8 mA h g^(-1)with a retention rate of78.5%at 2 A g^(-1)after 1100 cycles,and the ZPC@Zn||NH_(4)V_(4)O_(10) pouch full cell shows a retention of70.1%in reversible capacity at 3 A g^(-1)after 1100 cycles.The present incorporation of imide-linked covalent organic frameworks in the surface modification of ZMAs will offer fresh perspectives in the search for ideal protective films for the practicality of AZIBs.

Enhanced photothermal conversion in 3D stacked metal-organic framework nanosheets

Incorporating metal nanoparticles(MNPs)in metal–organic frameworks(MOFs)demonstrated great potential in thefield of photo-/photothermal-catalysis.How-ever,the oriented design and optimization of the 3D nano-architectures of MOF substrates to achieve high-efficiency light harvesting remains a challenge.Herein,guided on theoretical simulation,a facile etching strategy was employed to fab-ricate a 3D orderly-stacked-MOF-nanosheet-structure(CASFZU-1)with a high electricfield energy-density-distribution;well-dispersed MNPs were afterwards encapsulated onto the MOF support.The unique nanosheet structure improved the light absorbance over the broadband spectrum,thereby enhancing the plasmonic photothermal effects of the MNPs@CASFZU-1 composites.Based on the plasmon-driven photothermal conversion,the MNPs@CASFZU-1 composites exhibited approximately twofold catalytic efficiency in the hydrogenation reaction and a lower temperature for the full conversion of carbon monoxide,compared to their bulk-type composites.The surface-plasmon-driven photothermal effects can be exploited in innovative MNPs@MOF platforms for various applications.

Improvement of ionic conductivity of solid polymer electrolyte based on Cu-Al bimetallic metal-organic framework fabricated through molecular grafting

A composite solid electrolyte comprising a Cu-Al bimetallic metal-organic framework(CAB),lithium salt(LiTFSI)and polyethylene oxide(PEO)was fabricated through molecular grafting to enhance the ionic conductivity of the PEO-based electrolytes.Experimental and molecular dynamics simulation results indicated that the electrolyte with 10 wt.%CAB(PL-CAB-10%)exhibits high ionic conductivity(8.42×10~(-4)S/cm at 60℃),high Li+transference number(0.46),wide electrochemical window(4.91 V),good thermal stability,and outstanding mechanical properties.Furthermore,PL-CAB-10%exhibits excellent cycle stability in both Li-Li symmetric battery and Li/PL-CAB-10%/LiFePO4 asymmetric battery setups.These enhanced performances are primarily attributable to the introduction of the versatile CAB.The abundant metal sites in CAB can react with TFSI~-and PEO through Lewis acid-base interactions,promoting LiTFSI dissociation and improving ionic conductivity.Additionally,regular pores in CAB provide uniformly distributed sites for cation plating during cycling.

A layered multifunctional framework based on polyacrylonitrile and MOF derivatives for stable lithium metal anode

Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.

Structural survey of metal-covalent organic frameworks and covalent metal-organic frameworks

This review offers an overview of the latest developments in metal-covalent organic framework(MCOF)and covalent metal-organic framework(CMOF)materials,whose construction entails a combination of reversible coordination and covalent bonding adapted from metal-organic frameworks(MOFs)and covalent organic frameworks(COFs),respectively.With an emphasis on the MCOF and CMOF structures,this review surveys their building blocks and topologies.Specifically,the frameworks are classified based on the dimensions of their components(building blocks),namely,discrete building blocks and one-dimensional infinite building blocks.For the first category,the materials are further divided into collections of two-and three-dimensional networks based on their topologies.For the second category,the recently emerging MCOFs with woven structures are covered.Finally,the state-of-the-art in MCOF and CMOF chemistry has been laid out for promising avenues in future developments.

Metal-organic frameworks with mixed-ligands strategy as heterogeneous nucleation center to assist crystallization for efficient and stable perovskite solar cells

Deep-level defects and random oriented configuration in perovskite crystallization process would cause the nonradiative recombination and further affect the performance of perovskite solar cells(PSCs).Herein,two metal-organic frameworks(MOFs)with tunable Lewis-base passivation sites have been constructed(Cd-Httb and Cd-Httb-BDC,Httb=5-(4-(1H-1,2,4-triazole-1-yl)benzyl)-1h-tetrazole,BDC=1,4-dicarboxybenzene)to eliminate deep-level defects and simultaneously as nanostructured heterogeneous nucleation seed to assist the growth of large-grained perovskite films.Compared with the control and Cd-Httb,Cd-Httb-BDC designed with mix-ligands strategy exhibited the enhanced inducted effect on the crystallization and nucleation of high-quality perovskite films during annealing process.Consequently,the resultant Cd-Httb-BDC-modified device achieved higher power conversion efficiency(PCE)(22.18%)than the control(20.89%)and Cd-Httb(21.56%).Meanwhile,the unencapsulated Cd-Httb-BDC-modified device still maintained 90%of initial PCE after 1500 h in ambient conditions and exhibited enhanced thermal stability(85℃ in N_(2) atmosphere).This work presented a successful example of mixligands strategy on construction of high-quality MOF-assisted perovskite films for high-efficient and stable PSCs.

Integrated electrocatalysts derived from metal organic frameworks for gas-involved reactions

Integrated electrocatalysts(IECs)containing well-defined functional materials directly grown on the current collector have sparked increasing interest in the fields of electrocatalysis owing to efficient activity,high stability and the fact that they are easily assembled into devices.Recently,metal organic frameworks(MOFs)provide a promising platform for constructing advanced IECs because of their properties of low cost,large surface area and efficient structural tunability.In this review,the design principles of state-of-the-art IECs based on MOFs are presented,including by hydrothermal/solvothermal,template-directed,electrospinning,electrodeposition and other methods.The high performance of MOF-derived IECs has also been demonstrated in electrocatalytic gasinvolved reactions.This is promising for green energy storage and conversion.The structure-activity relationship and performance improvement mechanism of IECs are uncovered by discussing some in situ technologies for IECs.Finally,we provide an outlook on the challenges and prospects in this booming field.

Large-scale computational screening of metal–organic frameworks for D_(2)/H_(2) separation

Deuterium(D_(2)) is one of the important fuel sources that power nuclear fusion reactors. The existing D_(2)/H_(2) separation technologies that obtain high-purity D_(2) are cost-intensive. Recent research has shown that metal-organic frameworks(MOFs) are of good potential for D_(2)/H_(2) separation application. In this work, a high-throughput computational screening of 12020 computation-ready experimental MOFs is carried out to determine the best MOFs for hydrogen isotope separation application. Meanwhile, the detailed structure-performance correlation is systematically investigated with the aid of machine learning. The results indicate that the ideal D_(2)/H_(2) adsorption selectivity calculated based on Henry coefficient is strongly correlated with the 1/ΔAD feature descriptor;that is, inverse of the adsorbility difference of the two adsorbates. Meanwhile, the machine learning(ML) results show that the prediction accuracy of all the four ML methods is significantly improved after the addition of this feature descriptor. In addition, the ML results based on extreme gradient boosting model also revealed that the 1/ΔAD descriptor has the highest relative importance compared to other commonly-used descriptors. To further explore the effect of hydrogen isotope separation in binary mixture, 1548 MOFs with ideal adsorption selectivity greater than 1.5 are simulated at equimolar conditions. The structure-performance relationship shows that high adsorption selectivity MOFs generally have smaller pore size(0.3-0.5 nm) and lower surface area. Among the top 200 performers, the materials mainly have the sql, pcu, cds, hxl, and ins topologies.Finally, three MOFs with high D_(2)/H_(2) selectivity and good D_(2) uptake are identified as the best candidates,of all which had one-dimensional channel pore. The findings obtained in this work may be helpful for the identification of potentially promising candidates for hydrogen isotope separation.

Deep dive into anionic metal-organic frameworks based quasi-solid-state electrolytes

The development and application of high-capacity energy storage has been crucial to the global transition from fossil fuels to green energy.In this context,metal-organic frameworks(MOFs),with their unique 3D porous structure and tunable chemical functionality,have shown enormous potential as energy storage materials for accommodating or transporting electrochemically active ions.In this perspective,we specifically focus on the current status and prospects of anionic MOF-based quasi-solid-state-electrolytes(anionic MOF-QSSEs)for lithium metal batteries(LMBs).An overview of the definition,design,and properties of anionic MOF-QSSEs is provided,including recent advances in the understanding of their ion transport mechanism.To illustrate the advantages of using anionic MOF-QSSEs as electrolytes for LMBs,a thorough comparison between anionic MOF-QSSEs and other well-studied electrolyte systems is made.With these in-depth understandings,viable techniques for tuning the chemical and topological properties of anionic MOF-QSSEs to increase Li+conductivity are discussed.Beyond modulation of the MOFs matrix,we envisage that solvent and solid-electrolyte interphase design as well as emerging fabrication techniques will aid in the design and practical application of anionic MOF-QSSEs.

Recent Progress in Synthesis, Mechanism and Applications of Zinc-Based Metal-Organic Frameworks for Fluorescent Sensing

As more and more pollutants threaten human health, it is necessary and essential to develop sensitive, accurate and rapid methods and sensory materials to detect harmful substance. Metal-organic frameworks (MOFs) are inorganic-organic hybrids assembled from inorganic metal ions or clusters and suitable organic ligands. Zinc-based MOFs (Zn-MOFs) have emerged as one of the most promising sensory material of MOFs for practical applications, and attracted significant attention due to structural diversity and incomparable stability properties. However, there are few reviews on systemic summary of synthesis design, mechanism and application of Zn-MOFs. In this review, we summarize the synthesis design methods, structure types and luminescence mechanism of Zn-MOFs sensor recognition in the past ten years and their applications in metal cations, anions, organic compounds and other analytes. Finally, we present a short conclusion, and look forward to the future development direction of Zn-MOFs.

Theoretical study of molecular hydrogen and spiltover hydrogen storage on two-dimensional covalent-organic frameworks

Molecular hydrogen and spiltover hydrogen storages on five two-dimensional （2D） covalent-organic frameworks （COFs） （PPy-COF, TP-COF, BTP-COF, COF-18 A, and HHTP-DPB COF） are investigated using the grand canonical Monte Carlo （GCMC） simulations and the density functional theory （DFT）, respectively. The GCMC simulated results show that HHTP-DPB COF has the best performance for hydrogen storage, followed by BTP-COF, TP-COF, COF-18 A, and PPy-COE However, their adsorption amounts at room temperature are all too low to meet the uptake target set by US Department of Energy （US-DOE） and enable practical applications. The effects of pore size, surface area, and isosteric heat of hydrogen on adsorption amount are considered, which indicate that these three factors are all the important factors for determining the H2 adsorption amount. The chemisorptions of spiltover hydrogen atoms on these five COFs represented by the cluster models are investigated using the DFT method. The saturation cluster models are constructed by considering all possible adsorption sites for these cluster models. The average binding energy of a hydrogen atom and the saturation hydrogen storage density are calculated. The large average binding energy indicates that the spillover process may pro- ceed smoothly and reversibly. The saturation hydrogen storage density is much larger than the physisorption uptake of H2 molecules at 298 K and 100 bar （1 bar = 105 Pa）, and is close to or exceeds the 2010 US-DOE target of 6 wt% for hydrogen storage. This suggests that the hydrogen storage capacities of these COFs by spillover may be significantly enhanced. Thus 2D COFs studied in this paper are suitable hydrogen storage media by spillover.

Nitrogen ligands in two-dimensional covalent organic frameworks for metal catalysis

We introduced bipyridine ligands into a series of two‐dimensional （2D） covalent organic frame‐works （COFs） using 2,2’‐bipyridine‐5,5’‐dicarbaldehyde （2,2’‐BPyDCA） as a component in the mixed building blocks. The framework of the COFs was formed by the linkage of imine groups. The ligand content in the COFs was synthetically tuned by the content of 2,2’‐BPyDCA, and thus the amount of metal, palladium（II） acetate, bonded to the nitrogen ligands could be manipulated. Both the bipyri‐dine ligands and imine groups can coordinate with Pd（II） ions, but the loading position can be var‐ied, with one ligand favoring binding in the space between adjacent COFs’ layers and the other lig‐and favoring binding within the pores of the COFs. The Pd（II）‐loaded COFs exhibited good catalytic activity for the Heck reaction.

A purely green approach to low-cost mass production of zeolitic imidazolate frameworks

Although zeolitic imidazolate frameworks(ZIFs)have bright prospects in wide fields like gas storage/separation,catalysis and medicine,etc.,their large-scale applications are bottlenecked by the absence of their low-cost commercial production technique.Here,we report an uncon ventional method suitable for environmentally friendly and low-cost mass-production of ZIFs.In this method,taking the synthesis of ZIF-8 as an example,ZnO was used instead of Zn(NO_(3))_(2) in traditional solvent synthesis methods and CO_(2) was introduced to dissolve ZnO in aqueous solution of 2-methylimidazole(HMeim)and form water soluble salt([ZnMeim]^(+)[MeimCOO]^(-))at room temperature.Then,by removing CO_(2) through heating or vacuuming,Meim-ions are produced and instantaneously assemble with[ZnMeim]^(+)s to generate ZIF-8 without any by product.Due to the absence of strong acid anions(such as NO^(-)_(3) and Cl^(-) et al.)in solution,the washing of filter cake required in the conventional approaches could be omitted and the filtrate containing only water and HMeim could be reused completely.This method is really green as no waste gas or liquid generates because CO_(2) and water could be recycled perfectly.It overcomes almost all bottlenecks occurred in commercial production of ZIF-8 when using traditional methods.A pilot plant was established for mass-production of ZIF-8 and hundreds kilograms of ZIF-8 was produced,which indicates that the new method is not only environmentally friendly but also low cost and commercial accessibility.It is expected that the new method would open an avenue for commercial applications of ZIFs.