Metal organic polymers with dual catalytic sites for oxygen reduction and oxygen evolution reactions

Metal-organic frameworks and covalent organic frameworks have been widely employed in electrochemical catalysis owing to their designable skeletons,controllable porosities,and well-defined catalytic centers.However,the poor chemical stability and low electron conductivity limited their activity,and single-functional sites in these frameworks hindered them to show multifunctional roles in catalytic systems.Herein,we have constructed novel metal organic polymers(Co-HAT-CN and Ni-HAT-CN)with dual catalytic centers(metal-N_(4) and metal-N_(2))to catalyze oxygen reduction reaction(ORR)and oxygen evolution reaction(OER).By using different metal centers,the catalytic activity and selectivity were well-tuned.Among them,Co-HAT-CN catalyzed the ORR in a 4e^(-)pathway,with a half-wave potential of 0.8 V versus RHE,while the Ni-HAT-CN catalyze ORR in a 2e^(-)pathway with H_(2)O_(2) selectivity over 90%.Moreover,the Co-HAT-CN delivered an overpotential of 350 mV at 10 mA cm^(-2) with a corresponding Tafel slope of 24 mV dec^(-1) for OER in a 1.0 M KOH aqueous solution.The experimental results revealed that the activities toward ORR were due to the M-N_(4) sites in the frameworks,and both M-N_(4) and M-N_(2) sites contributed to the OER.This work gives us a new platform to construct bifunctional catalysts.

Integrated electrocatalysts derived from metal organic frameworks for gas-involved reactions

Integrated electrocatalysts(IECs)containing well-defined functional materials directly grown on the current collector have sparked increasing interest in the fields of electrocatalysis owing to efficient activity,high stability and the fact that they are easily assembled into devices.Recently,metal organic frameworks(MOFs)provide a promising platform for constructing advanced IECs because of their properties of low cost,large surface area and efficient structural tunability.In this review,the design principles of state-of-the-art IECs based on MOFs are presented,including by hydrothermal/solvothermal,template-directed,electrospinning,electrodeposition and other methods.The high performance of MOF-derived IECs has also been demonstrated in electrocatalytic gasinvolved reactions.This is promising for green energy storage and conversion.The structure-activity relationship and performance improvement mechanism of IECs are uncovered by discussing some in situ technologies for IECs.Finally,we provide an outlook on the challenges and prospects in this booming field.

Synthesis strategies of covalent organic frameworks: An overview from nonconventional heating methods and reaction media

Covalent organic frameworks(COFs), as an emerging class of porous crystalline materials constructed by covalent links between the building monomers, have gained tremendous attention. Over the past 15 years, COFs have made rapid progress and substantial development in the chemistry and materials fields. However, the synthesis of COFs has been dominated by solvothermal methods for a long time and it usually involves high temperature, high pressure and toxic organic solvents, which created many challenges for environmental considerations. Recently,the exploration of new approaches for facile fabrication of COFs has aroused extensive interest. Hence, in this review, we comprehensively describe the synthetic strategies of COFs from the aspects of nonconventional heating methods and reaction media. In addition, the advantages,limitations and properties of the preparation methods are compared. Finally, we outline the main challenges and development prospects of the synthesis of COFs in the future and propose some possible solutions.

Dual-functional MnS_(2)/MnO_(2) heterostructure catalyst for efficient acidic hydrogen evolution reaction and assisted degradation of organic wastewater

The design and synthesis of non-precious metal dual-functional electrocatalysts through the modulation of electronic structure are important for the development of renewable hydrogen energy.Herein,MnS_(2)/MnO_(2)-CC heterostructure dual-functional catalysts with ultrathin nanosheets were prepared by a twostep electrodeposition method for efficient acidic hydrogen evolution reaction(HER) and degradation of organic wastewater(such as methylene blue(MB)).The electronic structure of Mn atoms at the MnS_(2)/MnO_(2)-CC heterostructure interface is reconfigured under the joint action of S and O atoms.Theoretical calculations show that the Mn d-band electron distribution in MnS_(2)/MnO_(2)-CC catalyst has higher occupied states near the Fermi level compared to the MnO_(2) and MnS_(2) catalysts,which indicates that MnS_(2)/MnO_(2)-CC catalyst has better electron transfer capability and catalytic activity.The MnS_(2)/MnO_(2)-CC catalysts require overpotential of only 66 and 116 mV to reach current density of 10 and 100 mA cm^(-2)in MB/H_(2)SO_(4) media.The MnS_(2)/MnO_(2)-CC catalyst also has a low Tafel slope(26.72 mV dec^(-1)) and excellent stability(the performance does not decay after 20 h of testing).In addition,the MB removal efficiency of the MnS_(2)/MnO_(2)-CC catalyst with a better kinetic rate(0.0226) can reach 97.76%,which is much higher than that of the MnO_(x)-CC catalyst(72.10%).This strategy provides a new way to develop efficient and stable non-precious metal dual-functional electrocatalysts for HER and organic wastewater degradation.

Effect of Ionic Liquids on Organic Reactions Based on Activity Coefficients at Infinite Dilution

It is important to know how ILs(ionic liquids)influence organic reaction.In this paper,activity coefficients at infinite dilution of more than 80 organic compounds in ILs are collected and analyzed systematically.Through the study on typical organic reactions happened in ILs,such as Diels-Alder,esterification and Friedel-Crafts reaction,the ratio of activity coefficients at infinite dilution of products and reactants is employed to estimate different effects of different structural ILs on the rate and selectivity of reactions.

A New Modification Michaelis-Arbuzov, Allen, Milobendzky-Shulgin, Michaelis-Becker and Raymond Reactions with Organic Compounds Arsenic, Antimony and Bismuth

In this work study, we investigated possibility of modifying the new Michaelis Allen, Milobendzky-Shulgin, Michaelis-Becker, Raymond reactions with organic compounds of arsenic, antimony and bismuth is discovered. A new mechanism for possible reactions has been proposed.

Nanoengineering Metal–Organic Frameworks and Derivatives for Electrosynthesis of Ammonia

Electrocatalytic synthesis under mild conditions has become increasingly important as one of the practical alternatives for industrial applications,especially for the green ammonia(NH_(3))industry.A properly engineered electrocatalyst plays a vital role in the realization of superior catalytic performance.Among various types of promising nanomaterials,metal–organic frameworks(MOFs)are competitive candidates for developing efficient electrocatalytic NH_(3) synthesis from simple nitrogen-containing molecules or ions,such as N_(2) and NO_(3)^(−).In this review,recent advances in the development of electrocatalysts derived from MOFs for the electrosynthesis of NH_(3) are collected,categorized,and discussed,including their application in the N_(2) reduction reaction(NRR)and the NO_(3)^(−)reduction reaction(NO3RR).Firstly,the fundamental principles are illustrated,such as plausible mechanisms of NH_(3) generation from N_(2) and NO_(3)^(−),the apparatus of corresponding electrocatalysis,parameters for evaluation of reaction efficiency,and detection methods of yielding NH_(3).Then,the electrocatalysts for NRR processes are discussed in detail,including pristine MOFs,MOF-hybrids,MOF-derived N-doped porous carbons,single atomic catalysts from pyrolysis of MOFs,and other MOF-related materials.Subsequently,MOF-related NO3RR processes are also listed and discussed.Finally,the existing challenges and prospects for the rational design and fabrication of electrocatalysts from MOFs for electrochemical NH_(3) synthesis are presented,such as the evolution of investigation methods with artificial intelligence,innovation in synthetic methods of MOF-related catalysts,advancement of characterization techniques,and extended electrocatalytic reactions.

Quasi-Three-Dimensional Cyclotriphosphazene-Based Covalent Organic Framework Nanosheet for Efficient Oxygen Reduction

Metal-free carbon-based materials are considered as promising oxygen reduction reaction(ORR)electrocatalysts for clean energy conversion,and their highly dense and exposed carbon active sites are crucial for efficient ORR.In this work,two unique quasi-three-dimensional cyclotriphosphazene-based covalent organic frameworks(Q3CTP-COFs)and their nanosheets were successfully synthesized and applied as ORR electrocatalysts.The abundant electrophilic structure in Q3CTP-COFs induces a high density of carbon active sites,and the unique bilayer stacking of[6+3]imine-linked backbone facilitates the exposure of active carbon sites and accelerates mass diffusion during ORR.In particular,bulk Q3CTP-COFs can be easily exfoliated into thin COF nanosheets(NSs)due to the weak interlayerπ-πinteractions.Q3CTP-COF NSs exhibit highly efficient ORR catalytic activity(half-wave potential of 0.72 V vs.RHE in alkaline electrolyte),which is one of the best COF-based ORR electrocatalysts reported so far.Furthermore,Q3CTP-COF NSs can serve as a promising cathode for Zn-air batteries(delivered power density of 156 mW cm-2 at 300 mA cm^(-2)).This judicious design and accurate synthesis of such COFs with highly dense and exposed active sites and their nanosheets will promote the development of metal-free carbon-based electrocatalysts.

High-throughput mechanistic study of highly selective hydrogen-bonded organic frameworks for electrochemical nitrate reduction to ammonia

Hydrogen-bonded organic frameworks(HOFs),an emerging porous macrocyclic materials linked by hydrogen-bond,hold potential for gas separation and storage,sensors,optical,and electrocatalysts.Here,HOF-based electrocatalysts are rationally developed for nitrates reduction to ammonia,allowing not only to regulate wastewater pollution but also to accomplish carbon-neutral ammonia(NH_(3))synthesis.We preform high-throughput computational screening of thirty-six HOFs with various metals as active sites,denoted as HOF-M1,for nitrate reduction reaction(NO_(3)RR)toward NH_(3).We have implemented a hierarchical four-step screening strategy,and ultimately,HOF-Ti1 was selected based on its exceptional catalytic activity and selectivity in the NO_(3)RR process.Through additional analysis,we discovered that the d band center of the active metal sites serves as an effective parameter for designing and predicting the performance of HOFs in NO_(3)RR.This research not only showcases the immense potential of electrocatalysis in transforming NO_(3)RR into NH_(3)but also provides researchers with a compelling incentive to undertake further experimental investigations.

Ultrathin organic polymer with p-πconjugated structure for simultaneous photocatalytic disulfide bond generation and CO_(2)reduction

Combining photocatalytic organic reactions with CO_(2)reduction is an efficient solar energy utilization mode,but it is still limited by the organic species that can be matched and the low conversion.Herein,ultrathin organic polymer with p-πconjugated structure(TPP)was rationally designed and prepared,and showed a high yield of CO(15.2 mmol g^(-1))and conversion of SAS coupled products(100%),far exceeding the organic polymer with P=O structure.The enhanced photoredox activity of TPP is ascribed to the orbital interaction between the p-orbital on phosphorus and theπ-orbitals of aromatic,which can accelerate the photoinduced charge carrier separation and improve the CO_(2)adsorption capacity.TPP can also be used for the dehydrocoupling of various benzyl mercaptans to the corresponding SAS bond products.This work provides a new concept for the efficient synthesis of disulfide bonds combined with CO_(2)reduction in a photoreaction system.

Metal‐organic frameworks‐derived novel nanostructured electrocatalysts for oxygen evolution reaction

Engineering cost‐effective catalysts with exceptional performance for theelectrochemical oxygen evolution reaction (OER) remains crucial for theaccelerated development of renewable energy techniques, and especially so,given the pivotal role of OER in water electrolysis. On the basis of the metalnodes (clusters) and organic linkers, metal‐organic frameworks (MOFs) andtheir derivatives are rapidly gaining ground in the fabrication of electrocatalysts,with promising catalytic activity and sound durability in OER, thanksto their controllable pore structures, abundant unsaturated active sites of metalion, extensive specific surface area, as well as easily functionalized/modifiedsurfaces. This review presents an in‐depth understanding of the establishedprogress of MOFs‐derived materials for OER electrocatalysis. The materialdesigning strategies of the pristine, monometallic, and multimetallic MOFsbasedcatalysts are summarized to indicate the infinite possibilities of themorphology and the composition of MOF‐derived materials. While emphasisis laid on the essential features of MOF‐derived materials for the electrocatalysisof the corresponding reactions, insights about the applications in OERare discussed. Finally, this paper is concluded by presenting challengesand perspectives for MOF‐derived materials’ future applications in OERelectrocatalysis.

Amorphous nickel-cobalt bimetal-organic framework nanosheets with crystalline motifs enable efficient oxygen evolution reaction: Ligands hybridization engineering

Development of high-efficiency and low-cost electrocatalyst for oxygen evolution reaction(OER) is very important for use at alkaline water electrolysis.Metal-organic frameworks(MOF) provide a rich platform for designing multi-functional materials due to their controllable composition and ultra-high surface area.Herein,we report our findings in the development of amorphous nickel-cobalt bimetal-organic framework nanosheets with crystalline motifs via a simple "ligands hybridization engineering" strategy.These complexes' ligands contain inorganic ligands(H_2 O and NO_3) and organic ones,hexamethylenetetramine(HMT).Further,we investigated a series of mixed-metal with multi-ligands materials as OER catalysts to explore their possible advantages and features.It is found that the Ni doping is an effective approach for optimizing the electronic configuration,changing lattice ordering degree,and thus enhancing activities of HMT-based electrocatalysts.Also,the crystalline-amorphous boundaries of various HMTbased electrocatalyst can be easily controlled by simply changing amounts of Ni-precursor added.As a result,the optimized ultrathin(Co,0.3 Ni)-HMT nanosheets can reach a current density of 10 mA cm^(-2)at low overpotential of 330 mV with a small Tafel slope of 66 mV dec^(-1).Our findings show that the electronic structure changes induced by Ni doping,2 D nanosheet structure,and MOF frameworks with multiligands compositions play critical roles in the enhancement of the kinetically sluggish electrocatalytic OER.The present study emphasizes the importance of ligands and active metals via hybridization for exploring novel efficient electrocatalysts.

Recent Progress of Metal Organic Frameworks-Based Electrocatalysts for Hydrogen Evolution,Oxygen Evolution,and Oxygen Reduction Reaction

Exploring efficient and cost-saving electrocatalysts is essential to the renewable energy storage and utilization,which is still in its embryonic period.MOFs have drawn tremendous attention due to their adjustability,abundant active sites,and plentiful pores.Notably,satisfactory electrocatalytic performance has been achieved by MOFs-based electrocatalysts comparable to traditional electrocatalysts.State-of-the-art works about the MOFs-based electrocatalysts for hydrogen evolution reaction(HER),oxygen evolution reaction(OER),and ORR were summarized in this review.This review comprises a series of modifying strategies of MOFs and their derivatives,from aspects of structure,composition,and morphology.Furthermore,the active sites and functional mechanisms’recognition are involved in this review expecting to provide reference for rationally designing efficient electrocatalysts.At last,the current status,challenges,and perspectives of MOFs-based electrocatalysts are also discussed.

Metal-organic-framework-derived formation of Co–N-doped carbon materials for efficient oxygen reduction reaction

Non-precious metal nitrogen-doped carbonaceous materials have attracted tremendous attention in the field of electrochemical energy storage and conversion.Herein,we report the designed synthesis of a novel series of Co-N-C nanocomposites and their evaluation of electrochemical properties.Novel yolkshell structured Co nanoparticles@polymer materials are fabricated from the facile coating polymer strategy on the surface of ZIF-67.After calcination in nitrogen atmosphere,the Co–N–C nanocomposites in which cobalt metal nanoparticles are embedded in the highly porous and graphitic carbon matrix are successfully achieved.The cobalt nanoparticles containing cobalt metal crystallites with an oxidized shell and/or smaller(or amorphous)cobalt-oxide deposits appear on the surface of graphitic carbons.The prepared Co–N–C nanoparticles showed favorable electrocatalytic activity for oxygen reduction reactions,which is attributed to its high graphitic degree,large surface area and the large amount existence of Co–N active sites.

Facile access to C-N bonds via unexpected side reactions of Knoevenagel condensation and their application in high-efficiency organic solar cells

The construction of C-N bonds is of great importance in the fields of biology,medicine,chemistry and materials science.Here,the replacement of organic base from pyridine to piperidine in the Knoevenagel condensation process unexpectedly yields a series of novel organic molecules containing C-N bonds.Interestingly,the synthesis method does not require any external transition-metals catalysis,and photo-/electro-catalysis.Additionally,when the new compound 1b is added as a third component to a well-known binary system of PM6:Y6,the efficiency of the organic solar cell is significantly improved,resulting in an outstanding efficiency of 18.0%,which is one of the highest values reported to date for PM6:Y6-based ternary organic solar cells.

A Novel Oscillating Chemical Reaction Using Ninhydrin as Single Organic Substrate

A novel oscillating chemical reaction using ninhydrin as a single organic substrate was represented in this paper. It distinguished from the classically catalyzed BZ oscillating chemical reaction due to there was no active methene （CH2=） and/or enol structure in the ninhydrin molecule, which served as single organic substrate. This suggested that the substrates used in catalyzed BZ reaction were not always the organic compounds containing active methene （CH2=） and/or enol structure and bromination process in this kind of catalyzed chemical oscillating reaction was not also necessary.

Mo_(3)(C_(6)X_(6))_(2)(X=NH,S,O)monolayers:two-dimensional conductive metal-organic frameworks as effective electrocatalysts for the nitrogen reduction reaction

As a constituent element of amino acids,nitrogen plays an important role in nourishing plants,animals and other forms of life.Although the atmosphere is rich in nitrogen gas(N_(2)),the highly inert N≡N bond makes it difficult for most organisms to directly utilize N_(2).The supply of nitrogen in the biological chain mainly depends on the slow conversion of N_(2) to ammonia(NH3)by biological nitrogen fixation[1].

A Smog Chamber Facility for Qualitative and Quantitative Study on Atmospheric Chemistry and Secondary Organic Aerosol

In order to investigate the atmospheric oxidation processes and the formation of secondary organic aerosol （SOA）, an indoor environmental reaction smog chamber are constructed and characterized. The system consists of the collapsible ～830 L FEP Teflon film main reactor, in which the atmospheric chemical reactions take place and the formation of SOA occurs under the simulated atmospheric conditions, and the diverse on-line gas- and particle-phase instrumentation, such as the proton transfer reaction mass spectrometer, the synchrotron radiation photoionization mass spectrometer, the aerosol laser time-of-flight mass spectrometer, and other traditional commercial instruments. The initial characterization experiments are described, concerning the temperature and ultraviolet light intensity, the reactivity of the pure air, the wall loss rates of gaseous compounds and particulate matter. And the initial evaluation experiments for SOA yields from the ozonolysis of α-pinene and for mass spectra of the products resulting from the photooxidation of OH initiated isoprene are also presented, which indicate the applicability of this facility on the studies of gas-phase chemical mechanisms as well as the formation of SOA expected in the atmosphere.

Gas-solid catalytic reactions over ruthenium-based catalysts

Ruthenium （Ru）‐based catalysts are widely employed in several types of gas‐solid reactions because of their high catalytic activities. This review provides theoretical research on Ru‐based catalysts and an analysis of their basic properties and oxidation behavior. There is particular emphasis on Ru‐catalyzed gas‐solid catalytic reactions, including the catalytic oxidation of VOCs, preferential oxidation of CO, synthesis of ammonia, oxidation of HCl and partial oxidation of CH4. Recent litera‐ture on catalysis is summarized and compared. Finally, we describe current challenges in the field and propose approaches for future development of Ru‐based catalysts.