Yarlongite:A New Metallic Carbide Mineral

Yarlongite occurs in ophiolitic chromitite at the Luobusha mine （29°5′N 92°5′E, about 200 km ESE of Lhasa）, Qusum County, Shannan Prefecture, Tibet Autonomous Region, People＇s Republic of China. Associated minerals are： diamond, moissanite, wiistite, iridium （＂osmiridium＂）, osmium （＂iridosmine＂）, periclase, chromite, native iron, native nickel, native chromium, forsterite, Cr-rich diopside, intermetallic compounds Ni-Fe-Cr, Ni-Cr, Cr-C, etc. Yarlongite and its associated minerals were handpicked from a large heavy mineral sample of chromitite. The metallic carbides associated with yarlongite are cohenite, tongbaite, khamrabaevite and qusongite （IMA2007-034）. Yarlongite occurs as irregular grains, with a size between 0.02 and 0.06 mm, steel-grey colour, H Mohs： 5^1/2-6. Tenacity： brittle. Cleavage： （0 0 1） perfect. Fracture： conchoidal. Chemical formula： （Cr4Fe4Ni）29C4, or （Cr,Fe,Ni）29C4, Crystal system： Hexagonal, Space Group： P63/mc, a = 18.839（2） A, c = 4.4960 （9） A, V = 745.7（2） A^3, Z = 6, Density （calc.） = 7.19 g/cm3 （with simplified formula）. Yariongite has been approved as a new mineral by the CNMNC （IMA2007-035）. Holotype material is deposited at the Geological Museum of China （No. Ml1650）.

Spectroscopic characterization of chain-to-ring structural evolution in platinum carbide clusters

Metal carbides play an important role in catalysis and functional materials.However,the structural characterization of metal carbide clusters has been proven to be a challenging experimental target due to the difficulty in size selection.Here we use the size-specific photoelectron velocity-map imaging spectroscopy to study the structures and properties of platinum carbide clusters.Quantum chemical calculations are carried out to identify the structures and to assign the experimental spectra.The results indicate that the cluster size of the chain-to-ring structural evolution for the PtC_(n)^(-)anions occurs at n=14,whereas that for the PtC_(n) neutrals at n=10,revealing a significant effect of charge on the structures of metal carbides.The greatest importance of these building blocks is the strong preference of the Pt atom to expose in the outer side of the chain or ring,exhibiting the active sites for catalyzing potential reactions.These findings provide unique spectroscopic snapshots for the formation and growth of platinum carbide clusters and have important implications in the development of related single-atom catalysts with isolated metal atoms dispersed on supports.

Two-Dimensional Transition Metal Carbides and Nitrides(MXenes): Synthesis, Properties, and Electrochemical Energy Storage Applications

A family of 2D transition metal carbides and nitrides known as MXenes has received increasing attention since the discovery of Ti3C2 in 2011. To date, about 30 different MXenes with well-defined structures and properties have been synthesized, and many more are theoretically predicted to exist. Due to the numerous assets including excellent mechanical properties, metallic conductivity,unique in-plane anisotropic structure, tunable band gap, and so on, MXenes rapidly positioned themselves at the forefront of the 2D materials world and have found numerous promising applications. Particular interest is devoted to applications in electrochemical energy storage, whereby 2D MXenes work either as electrodes,additives, separators, or hosts. This review summarizes recent advances in the synthesis, fundamental properties and composites of MXene and highlights the state-of-the-art electrochemical performance of MXene-based electrodes/devices.The progresses in the field of supercapacitors and Li-ion batteries, Li-S batteries, Naand other alkali metal ion batteries are reviewed, and current challenges and new opportunities for MXenes in this surging energy storage field are presented. In the focus of interest is the possibility to boost device-level performance, particularly that of rechargeable batteries, which are of utmost importance in future energy technologies. Very recently, the 2019 Nobel Prize in Chemistry was awarded to the inventors of the Li-ion battery. For sure, this will provide an additional stimulation to study fundamental aspects of electrochemical energy storage.

Recent Progress in Emerging Two‑Dimensional Transition Metal Carbides

As a new member in two-dimensional materials family,transition metal carbides(TMCs)have many excellent properties,such as chemical stability,in-plane anisotropy,high conductivity and flexibility,and remarkable energy conversation efficiency,which predispose them for promising applications as transparent electrode,flexible electronics,broadband photodetectors and battery electrodes.However,up to now,their device applications are in the early stage,especially because their controllable synthesis is still a great challenge.This review systematically summarized the state-of-the-art research in this rapidly developing field with particular focus on structure,property,synthesis and applicability of TMCs.Finally,the current challenges and future perspectives are outlined for the application of 2D TMCs.

Adhesion between Nonreactive Liquid Metals and Transition Metal Carbides

On the basis of the experimental work of adhesion(W)data,the adhesion between transition metal car- bides and pure liquid metals which do not react with carbides is studied.In view of great scattering of the ex- perimental values of W,a critical analysis of these results is performed.The selected W values for 9 copper/carbide systems and 6 metal/TiC systems are used to discuss the various suggestions concerning the mechanism of adhesion and to evidence the role of the valence electrons of the both carbide and metal on the interactions between metals and carbides.The interactions between a metal and a carbide are essentially metal- lic interactions,resulting from the overlapping of the valence electrons at the metal/carbide interface.

Experiment and simulation on degradation and burnout mechanisms of SiC MOSFET under heavy ion irradiation

Experiments and simulation studies on 283 MeV I ion induced single event effects of silicon carbide(SiC) metal–oxide–semiconductor field-effect transistors(MOSFETs) were carried out. When the cumulative irradiation fluence of the SiC MOSFET reached 5×10^(6)ion·cm^(-2), the drain–gate channel current increased under 200 V drain voltage, the drain–gate channel current and the drain–source channel current increased under 350 V drain voltage. The device occurred single event burnout under 800 V drain voltage, resulting in a complete loss of breakdown voltage. Combined with emission microscope, scanning electron microscope and focused ion beam analysis, the device with increased drain–gate channel current and drain–source channel current was found to have drain–gate channel current leakage point and local source metal melt, and the device with single event burnout was found to have local melting of its gate, source, epitaxial layer and substrate. Combining with Monte Carlo simulation and TCAD electrothermal simulation, it was found that the initial area of single event burnout might occur at the source–gate corner or the substrate–epitaxial interface, electric field and current density both affected the lattice temperature peak. The excessive lattice temperature during the irradiation process appeared at the local source contact, which led to the drain–source channel damage. And the excessive electric field appeared in the gate oxide layer, resulting in drain–gate channel damage.

Proton induced radiation effect of SiC MOSFET under different bias

Radiation effects of silicon carbide metal–oxide–semiconductor field-effect transistors(SiC MOSFETs)induced by 20 MeV proton under drain bias(V_(D)=800 V,V_(G)=0 V),gate bias(V_(D)=0 V,V_(G)=10 V),turn-on bias(V_(D)=0.5 V,V_(G)=4 V)and static bias(V_(D)=0 V,V_(G)=0 V)are investigated.The drain current of SiC MOSFET under turn-on bias increases linearly with the increase of proton fluence during the proton irradiation.When the cumulative proton fluence reaches 2×10^(11)p·cm^(-2),the threshold voltage of SiC MOSFETs with four bias conditions shifts to the left,and the degradation of electrical characteristics of SiC MOSFETs with gate bias is the most serious.In the deep level transient spectrum test,it is found that the defect energy level of SiC MOSFET is mainly the ON2(E_(c)-1.1 eV)defect center,and the defect concentration and defect capture cross section of SiC MOSFET with proton radiation under gate bias increase most.By comparing the degradation of SiC MOSFET under proton cumulative irradiation,equivalent 1 MeV neutron irradiation and gamma irradiation,and combining with the defect change of SiC MOSFET under gamma irradiation and the non-ionizing energy loss induced by equivalent 1 MeV neutron in SiC MOSFET,the degradation of SiC MOSFET induced by proton is mainly caused by ionizing radiation damage.The results of TCAD analysis show that the ionizing radiation damage of SiC MOSFET is affected by the intensity and direction of the electric field in the oxide layer and epitaxial layer.

Designing of highly selective and high-temperature endurable RWGS heterogeneous catalysts: recent advances and the future directions

Reverse water gas shift（RWGS） reaction can be served as a pivotal stage of transitioning the abundant CO;resource into chemicals or hydrocarbon fuels, which is attractive for the CO;utilization and of eventually significance in enabling a rebuilt ecological system for unconventional fuels. This concept is appealing when the process is considered as a solution for the storage of renewable energy, which may also find a variety of potential end uses for the outer space exploration. However, a big challenge to this issue is the rational design of high temperature endurable RWGS catalysts with desirable CO product selectivity. In this work, we present a comprehensive overview of recent publications on this research topic,mainly focusing on the catalytic performance of RWGS reaction over three major kinds of heterogeneous catalysts, including supported metal catalysts, mixed oxide catalysts and transition metal carbides. The reaction thermodynamic analysis, kinetics and mechanisms are also described in detail. The present review attempts to provide a general guideline about the construction of well-performed heterogeneous catalysts for the RWGS reaction, as well as discussing the challenges and further prospects of this process.

Single-atom Pt promoted Mo_(2)C for electrochemical hydrogen evolution reaction

Hydrogen generation from electrochemical water splitting powered by renewable energy is important to the sustainable society,but the prohibitive cost of current Pt electrocatalyst has impeded the large-scale production of hydrogen by water electrolysis.In this contribution,a new low-Pt electrocatalyst for hydrogen evolution reaction(HER) has been fabricated by a facile one-pot synthesis approach,in which Pt^(2+)cations and phosphomolybdic acid confined in the metal-organic frameworks(MOFs) were submitted to pyrolysis to yield Pt single atoms dispersed into Mo_(2)C nanocrystals in 3 D porous carbon matrix.The as-synthesized Pt_(1)-Mo_(2)C-C catalyst with Pt content of only 0.7 wt% exhibited remarkably enhanced activity for HER in 1 M KOH,with overpotential at 10 mA/cm^(2) lowered from 211 mV to 155 mV and 7-fold higher mass activity(7.14 A/mgpt) than the benchmark 20 wt% Pt/C.The promoted activity can be attributed to the electronic interaction between Pt single atoms and Mo2C surface,which not only improved water activation but also strengthened hydrogen adsorption,as indicated by FTIR and microcalorimetric characterizations.

A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated sys- tematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractil-ity improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.

Pseudo-in-situ stir casting: a new method for production of aluminum matrix composites with bimodal-sized B_4C reinforcement

A new method was applied to produce an Al-0.5wt%Ti-0.3wt%Zr/5vol%B_4C composite via stir casting with the aim of characterizing the microstructure of the resulting composite. For the production of the composite, large B4 C particles（larger than 75 μm） with no pre-heating were added to the stirred melt. Reflected-light microscopy, X-ray diffraction, scanning electron microscopy, field-emission scanning electron microscopy, laser particle size analysis, and image analysis using the Clemex software were performed on the cast samples for microstructural analysis and phase detection. The results revealed that as a consequence of thermal shock, B_4 C particle breakage occurred in the melt. The mechanism proposed for this phenomenon is that the exerted thermal shock in combination with the low thermal shock resistance of B_4 C and large size of the added B_4 C particles were the three key parameters responsible for B_4 C particle breakage. This breakage introduced small particles with sizes less than 10 μm and with no contamination on their surfaces into the melt. The mean particle distance measured via image analysis was approximately 60 μm. The coefficient of variation index, which was used as a measure of particle distribution homogeneity, showed some variations, indicating a relatively homogeneous distribution.

Rational design of 3D porous niobium carbide MXene/rGO hybrid aerogels as promising anode for potassium-ion batteries with ultrahigh rate capability

An effective method is designed to construct three-dimensional(3D)Nb_(2)C/reduced graphene oxide(rGO)hybrid aerogels through a low-temperature graphene oxide(GO)-assisted hydrothermal self-assembly followed by freeze-drying and annealing.The intimately coupled Nb_(2)C/rGO hybrid aerogel combines the advantages of large specific surface area and rich 3D interconnected porous structure of aerogel as well as high conductivity and low potassium diffusion energy barrier of Nb_(2)C,which not only effectively prevents the self-restacking of Nb2C nanosheets to allow more active sites exposed and accommodate the volume change during the charge/discharge process,but also increases the accessibility of electrolyte and promotes the rapid transfer of ions/electrons.As a result,Nb_(2)C/rGO-2 as the anode of potassium ion batteries(KIBs)delivers a large reversible specific capacity(301.7 mAh·g^(−1)after 500 cycles at 2.0 A·g^(−1)),an ultrahigh rate capability(155.5 mAh·g^(−1)at 20 A·g^(−1)),and an excellent long-term large-current cycle stability(198.8 mAh·g^(−1)after 1,000 cycles at 10 A·g^(−1),with a retention of 83.3%).Such a high-level electrochemical performance,especially the ultrahigh rate capability,is the best among transition metal carbides and nitride(MXene)-based materials reported so far for KIBs.The diffusion kinetics of K+is investigated thoroughly,and the synergetic charge–discharge mechanism and the structure–performance relationship of Nb_(2)C/rGO are revealed explicitly.The present work provides a good strategy to solve the self-restacking problem of two-dimensional materials and also enlarges the potential applications of MXenes.

Design of high-performance molybdenum alloys via doping metal oxide and carbide strengthening:A review

Metal oxide and carbide strengthening molybdenum(Mo)alloys have been designed as promising ad-vanced materials in refractory metals to solve some of the core engineering problems in superalloy ap-plications.Hence,there is a need to summarize the results obtained and evaluate the opportunities for preparing high-performance Mo alloys by strengthening metal oxides and carbides to improve the per-formance characteristics of Mo metal materials.This paper reviews the results of the reported work con-cerning the structure and properties of Mo alloys with different metal oxide and carbide strengthening methods added to Mo matrix.The influence of the doping of La 2 O 3 and Y 2 O 3 particles,ceramic Al 2 O 3 and ZrO 2 particles,and refractory TiC and ZrC carbides particles of Mo alloys are discussed.The impacts of particle morphology,size,distribution and volume fractions of oxide and carbide are analyzed,as well as the specific features of different doping techniques for obtaining high-performance Mo alloys mate-rials.This work will guide future research on the design of high-performance refractory Mo alloys by adding oxides and carbide particles,helping to solve the core issues in the field of superalloy application research.

The ground-state structure and physical properties of RuC: first-principles calculations

We have extensively explored the ground-state structure of RuC using the particle swarm optimization algorithm for crystal structural prediction. A hexagonal I：t-3m structure has been proposed ms the best candidate, which is energetically more favorable than the previously proposed zinc blend structure. The R-3m-RuC possesses alternative stacking of double hexagonal close-packed Ru atom layers and C atom layers, and it is dynamically stable evidenced by the calculation of phonon dispersion. The calculated large bulk modulus, shear modulus, and elastic constant C44 reveal that it is an ultra-incompressible and hard material. The evidence of strong covalent bonding of Ru C, which plays an important role to form a hard material, is manifested by the partial densities of states analysis.

Carbon deficiency introduced plasticity of rock-salt-structured transition metal carbides

High-hardness rock-salt structured transitional metal carbides(TMC)are attracting substantial interest as potential next-generation thermal protection materials.However,the intrinsic brittleness of TMC ceramics impedes their performance in aerodynamically harsh environments.In this work,a promising strategy is proposed to introduce plasticity in TaC–HfC solid solutions by manipulating carbon deficiency.The approach combines density-functional theory(DFT)with experiments and takes Pugh's ratio(k)as the criteria.Depletion of carbon atoms in TaC–HfC solid solutions results in the de-localizing of valence electrons,deviation of spatial modulus along different crystal plane directions,and leading to significant elastic anisotropy.The carbon deficient Ta_(0.8)Hf_(0.2)C_(0.8) is predicted to be a‘softer phase’with reduced modulus and Pugh's ratio(k=0.58).A series of Ta1–xHfxCy(x=0.2 and 0.8,y=0.8,0.9,and 1.0)bulk ceramics are experimentally fabricated by an excessive metal alloying method.Trigonal and hexagonal close-packed structured carbides are derived when the carbon deficiency y decreased to 0.7.The indentation modulus drops from 641.8±14.8 GPa for Ta_(0.8)Hf_(0.2)C_(1.0) to 555.8±9.9 GPa for Ta0.8Hf0.2C0.8.The specific stoichiometric composition of Ta_(0.8)Hf_(0.2)C_(0.8) is experimentally verified to possess both plasticity(k=0.41)and ultra-high nanohardness(41.3±1.3 GPa).

Single-source precursor derived high-entropy metal–carbide nanowires:Microstructure and growth evolution

In recent years,high-entropy metal carbides(HECs)have attracted significant attention due to their exceptional physical and chemical properties.The combination of excellent performance exhibited by bulk HEC ceramics and distinctive geometric characteristics has paved the way for the emergence of one-dimensional(1D)HECs as novel materials with unique development potential.Herein,we successfully fabricated novel(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))C nanowires derived via Fe-assisted single-sourced precursor pyrolysis.Prior to the synthesis of the nanowires,the composition and microstructure of(Ti,Zr,Hf,Nb,Ta)-containing precursor(PHECs)were analyzed,and divinylbenzene(DVB)was used to accelerate the conversion process of the precursor and contribute to the formation of HECs,which also provided a partial carbon source for the nanowire growth.Additionally,multi-branched,single-branched,and single-branched bending nanowires were synthesized by adjusting the ratio of PHECs to DVB.The obtained single-branched(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))C nanowires possessed smooth surfaces with an average diameter of 130–150 nm and a length of several tens of micrometers,which were a single-crystal structure and typically grew along the[11¯1]direction.Also,the growth of the(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))C nanowires was in agreement with top-type vapor–liquid–solid mechanism.This work not only successfully achieved the fabrication of HEC nanowires by a catalyst-assisted polymer pyrolysis,but also provided a comprehensive analysis of the factors affecting their yield and morphology,highlighting the potential application of these attractive nano-materials.

V_(8)C_(7)/C稳定的超细Ru纳米颗粒用于全pH下的析氢反应

The development of cost-effective electrocatalysts with high efficiency and long durability for hydrogen evolution reaction(HER)remains a great challenge in the field of water splitting.Herein,we design an ultrafine and highly dispersed Ru nanoparticles stabilized on porous V_(8)C_(7)/C matrix via pyrolysis of the metal-organic frameworks V-BDC(BDC:1,4-benzenedicarboxylate).The obtained Ru-V_(8)C_(7)/C composite exhibits excellent HER performance in all p H ranges.At the overpotential of 40 mV,its mass activity is about 1.9,4.1 and 9.4 times higher than that of commercial Pt/C in acidic,neutral and alkaline media,respectively.Meanwhile,Ru-V_(8)C_(7)/C shows the remarkably high stability in all p H ranges which,in particular,can maintain the current density of 10 m A cm^(-2)for over 150 h in 1.0 mol L^(-1)phosphate buffer saline(PBS).This outstanding HER performance can be attributed to the high intrinsic activity of Ru species and their strong interface interactions to the V_(8)C_(7)/C substrate.The synergistic effect of abundant active sites on the surface and the formed Ru-C-V units at the interface promotes the adsorption of reaction intermediates and the release of active sites,contributing the fast HER kinetics.This work provides a reference for developing versatile and robust HER catalysts by surface and interface regulation for pH tolerance.

Sequentially bridged MXene platelets for strong high‐temperature EM‐IR bi‐stealth sheets

Combination of flexible multifunctional stealth technology properties such as electromagnetic(EM)and infrared(IR)stealth is crucial to the development of aerospace,military,and electronic fields,but the synthesis technology still has a significant challenge.Herein,we have successfully designed and synthesized highly flexible MXene@cellulose lamellae/borate ion(MXCB)sheets with strong high‐temperature EM‐IR bi‐stealth through sequential bridging of hydrogen and covalent bonds.The resultant MXCB sheets display high conductivity and good mechanical features such as flexibility,stretchability,fatigue resistance,and ultrasonic damage.MXCB sheets have a high tensile strength of 795 MPa.Furthermore,MXCB sheets with different thicknesses indicate exceptional high‐temperature thermal‐camouflage characteristics.This reduces the radiation temperature of the target object(>300°C)to 100°C.The conductivity of MXCB sheet with 3μm thickness is 6108 S/cm and the EM interference(EMI)shielding value is 39.74 dB.The normalized surface‐specific EMI SE absolute shielding effectiveness(SSE/t)is as high as 39312.78 dB·cm2/g,which remained 99.39%even after 10,000 times repeated folding.These multifunctional ultrathin MXCB sheets can be arranged by vacuum‐assisted induction to develop EM‐IR bi‐stealth sheet.

Achieving ultra-broadband electromagnetic wave absorption in high-entropy transition metal carbides (HE TMCs)

Electronic devices pervade everyday life,which has triggered severe electromagnetic(EM)wave pollution.To face this challenge,developing EM wave absorbers with ultra-broadband absorption capacity is critically required.Currently,nano-composite construction has been widely utilized to realize impedance match and broadband absorption.However,complex experimental procedures,limited thermal stability,and interior oxidation resistance are still unneglectable issues.Therefore,it is appealing to realize ultra-broadband EM wave absorption in single-phase materials with good stability.Aiming at this target,two high-entropy transition metal carbides(HE TMCs)including(Zr,Hf,Nb,Ta)C(HE TMC-2)and(Cr,Zr,Hf,Nb,Ta)C(HE TMC-3)are designed and synthesized,of which the microwave absorption performance is investigated in comparison with previously reported(Ti,Zr,Hf,Nb,Ta)C(HE TMC-1).Due to the synergistic effects of dielectric and magnetic losses,HE TMC-2 and HE TMC-3 exhibit better impedance match and wider effective absorption bandwidth(EAB).In specific,the exclusion of Ti element in HE TMC-2 endows it optimal minimum reflection loss(RL_(min))and EAB of−41.7 dB(2.11 mm,10.52 GHz)and 3.5 GHz(at 3.0 mm),respectively.Remarkably,the incorporation of Cr element in HE TMC-3 significantly improves the impedance match,thus realizing EAB of 10.5,9.2,and 13.9 GHz at 2,3,and 4 mm,respectively.The significance of this study lays on realizing ultra-broadband capacity in HE TMC-3(Cr,Zr,Hf,Nb,Ta),demonstrating the effectiveness of high-entropy component design in tailoring the impedance match.