Foreign metallic pellet in the heart

Foreign bodies in the heart are a rare but serious form of cardiac injury. The objects usually are sharp pointed. Such as acupuncture needles,sewing needles, coat hangers, fragments of Kirschner wires, pins, etc. 1 We report a patient with a metallic pellet lodged in the heart, which was accurately diagnosed and successfully removed.

Direct Reduction Process of Pellet Containing Carbon with Addition of Zn-Pb-Bearing Iron and Steel Plant Dust

The study on direct reduction process of pellet containing carbon with the addition of Zn-Pb-bearing iron and steel plant dust shows that the reduction time and pellet basicity have obvious effect on the evaporation of lead and final metallization degree of pellet.The reduction temperature has significantl influences on the lead and zinc evaporation ratios and on final metallization degree of pellet. The optimum process parameters obtained are reduction temperature of 1 250 ℃,reduction time of 25 min and pellet basicity of 0.9.

Effects of smelting parameters on the slag/metal separation behaviors of Hongge vanadium-bearing titanomagnetite metallized pellets obtained from the gas-based direct reduction process

Smelting separations of Hongge vanadium-bearing titanomagnetite metallized pellets（HVTMP）prepared by gas-based direct reduction were investigated,and the effects of smelting parameters on the slag/metal separation behaviors were analyzed.Relevant mechanisms were elucidated using X-ray diffraction analysis,FACTSAGE 7.0 calculations,and scanning electron microscopy observations.The results show that,when the smelting temperature,time,and C/O ratio are increased,the recoveries of V and Cr of HVTMP in pig iron are improved,the recovery of Fe initially increases and subsequently decreases,and the recovery of Ti O_2 in slag decreases.When the smelting Ca O/Si O_2 ratio is increased,the recoveries of Fe,V,and Cr in pig iron increase and the recovery of Ti O_2 in slag initially increases and subsequently decreases.The appropriate smelting separation parameters for HVTMP are as follows：smelting temperature of 1873 K;smelting time of 30–50 min;C/O ratio of 1.25;and Ca O/Si O_2 ratio of 0.50.With these optimized parameters（smelting time：30 min）,the recoveries of Fe,V,Cr,and Ti O_2 are 99.5%,91.24%,92.41%,and 94.86%,respectively.

Effect of quaternary basicity on reduction behavior of iron-bearing dust pellets

The treatment of iron-bearing dusts and sludges by the rotary hearth furnace process has the advantage of sufficient utilization of valuable metals and a high impurity removal rate,but the lower strength of the metallized product needs to be addressed.The effects of quaternary basicity R4(w(CaO+MgO)/w(SiO_(2)+Al_(2)O_(3)))on the reduction behavior and physical and chemical properties of metallized pellets,including phase composition,compressive strength,microstructure and soft melting area,were investigated with FactSage thermodynamic software and experiments.The strength of metallized pellets depended on the gangue composition,such as CaO,MgO,Al_(2)O_(3) and SiO_(2),due to the altered chemical composition,physical phase composition,microscopic morphology and stability of the slag phase.The reduction of carbon-bearing pellets was significantly promoted by suitable basicity.The lower basicity(R_(4)<1.4)facilitated the formation of low melting point iron-containing compounds from SiO_(2) and Al_(2)O_(3) with FeO,resulting in increased liquid phase generation,but lower metallization rate,due to the hindered precipitation and growth of iron grains.Interestingly,the higher basicity(R_(4)>1.8)also increased the amount of liquid phase and improved the strength of the pellets,due to the granular iron crystals bonded into sheets.Notably,the main component of the liquid phase in high-basicity conditions was calcium ferrite.Although the additional amount of liquid phase was beneficial to the strength of the metallized pellets,calcium disilicate was formed at R_(4)=1.6,resulting in a reduction in the compressive strength of the pellets to 1521.9 N/pellet.

Influences of Technological Parameters on Smelting-separation Process for Metallized Pellets of Vanadium-bearing Titanomagnetite Concentrates

The smelting-separation process for metallized pellets of vanadium-bearing titanomagnetite concentrates was studied.The influences of smelting temperature,smelting time,and the basicity of the metallized pellet on vanadium and iron recovery were investigated.The characteristics of titanium slag were analyzed using X-ray diffraction,energy dispersive spectroscopy,and mineralographic microscopic analysis.The results demonstrate that appropriate increases in smelting temperature and smelting time can improve the vanadium and iron recovery from metallized pellets and are beneficial for the slag-iron separation.Although increasing the basicity of the metallized pellet can considerably improve the vanadium and iron recovery,the TiO;grade of titanium slag was decreased.Under the optimal conditions,90.17% of vanadium and 92.98% of iron in the metallized pellet were recovered,and the TiO;grade of titanium slag was 55.01%.It was found that anosovite,augite,spinel,glassiness,and metallic iron were the main mineral phases of the titanium slag.