As one of the most exciting inspection and powerful analysis methods in modern materials metallographic examinations, the difference interference contrast (DIC) method has many advantages, including relatively low req...As one of the most exciting inspection and powerful analysis methods in modern materials metallographic examinations, the difference interference contrast (DIC) method has many advantages, including relatively low requirement for specimen preparation, obvious relief senses observed under microscope. Details such as fine structures or defects that are not or barely visible in incident-light bright field, could be easily revealed and thus make materials analysis more reliable. Differential interference contrast produces an image that can be readily manipulated using digital and video imaging techniques to further enhance contrast. But, studies of material metallography based on DIC method have rarely carried out. Based on the fundamental principle of the DIC method combing with the computer image analysis, applications of DIC method in materials metallographic examination were investigated in this study.展开更多
In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite mo...In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite morphology in Cu-Zn-Al SMA,i.e. plate, spean bamboo, noose, round-spot, line and dot-like martensites. During transformation and inverse-transformation, the thermoelastic martensites were rising and falling, growing and shrinking, splitting and merping. The growth patterns of thermoelastic martensite were divided into three types: fast growing, very slow ex-pansion and uniform automatic growth. Automatic growth appeared when ageing at a temperature below Ms. The result, for the first time, coofirmed Olson and Cohen,s suggestion that thermoelastic martensite may be automatically grown when ageing be-low Ms. With increasing numbers of thermal cycling, both the memory recovery ratio (% )and memory recoverp degradation (%) degraded logarithmically. The degrada-tion was steep in the initial stage and then became more and more gradual in the middle and the final stages caused by the stabilisation of martensite. In the initial stage, vacancies assumed the controlling role, while dislocations took the major role in other stages. The martensite transformation caused the intedeces to become bent and blurmd, but with increasing cycling numbers, the movements of interface had the same degradation effects as the memory recovery ratio curves. Under these conditions, we also found the martensites on one side of the intedece became reorientated and par-allel to the intedece. It was therefore concluded that the movement degradation of the interface and the appearance of bamboo like martensite induced the degradation of two way shape memory effect (TWMP).展开更多
Submerged arc welding （SAW） has shortcoming of over heat input, which increases grain size in heat-affected zone （ HAZ） and decreases welding quality and mechanical properties of the joints serioasly. With improve...Submerged arc welding （SAW） has shortcoming of over heat input, which increases grain size in heat-affected zone （ HAZ） and decreases welding quality and mechanical properties of the joints serioasly. With improvements of welding equipment, direct current （ DC） pulsed SAW （ PSAW） was utilized successfully in the research. Comparing DC PSAW with DC common SAW （ CSAW） , the metallographic structure was analyzed with optical and electron microscope, the width of HAZ was measured as well as the width and hardness of the coarse grained HAZ （CGHAZ）. The research shows that DC PSAW joint had higher welding penetration, narrower HAZ and CGHAZ, which benefited HAZ performance and welding quality.展开更多
An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of th...An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of the fragments formed.This study investigated the fragmentation performance of a new high-carbon silicon-manganese(HCSiMn)steel cylindrical shell through fragment recovery experiments.Compared with the conventional 45Cr steel shell,the number of small mass fragments produced by the HCSi Mn steel shell was significantly increased with a scale parameter of 0.57 g fitted by the Weibull distribution model.The fragmentation process of the HCSi Mn shell exhibited more brittle tensile fracture characteristics,with the microcrack damage zone on the outer surface being the direct cause of its high fragmentation.On the one hand,the doping of alloy elements resulted in grain refinement by forming metallographic structure of tempered sorbite,so that microscopic intergranular fracture reduces the characteristic mass of the fragments;on the other hand,the distribution of alloy carbides can exert a"pinning"effect on the substrate grains,causing more initial cracks to form and propagate along the brittle carbides,further improving the shell fragmentation.Although the killing power radius for light armored vehicles was slightly reduced by about 6%,the dense killing radius of HCSiMn steel projectile against personnel can be significantly increased by about 26%based on theoretical assessment.These results provided an experimental basis for high fragmentation warhead design,and to some extent,revealed the correlation mechanism between metallographic structure and shell fragmentation.展开更多
The myelin sheath is a lipoprotein-rich,multilayered structure capable of increasing conduction velocity in central and peripheral myelinated nerve fibers.Due to the complex structure and composition of myelin,various...The myelin sheath is a lipoprotein-rich,multilayered structure capable of increasing conduction velocity in central and peripheral myelinated nerve fibers.Due to the complex structure and composition of myelin,various histological techniques have been developed over the centuries to evaluate myelin under normal,pathological or experimental conditions.Today,methods to assess myelin integrity or content are key tools in both clinical diagnosis and neuroscience research.In this review,we provide an updated summary of the composition and structure of the myelin sheath and discuss some histological procedures,from tissue fixation and processing techniques to the most used and practical myelin histological staining methods.Considering the lipoprotein nature of myelin,the main features and technical details of the different available methods that can be used to evaluate the lipid or protein components of myelin are described,as well as the precise ultrastructural techniques.展开更多
Based on two-dimensional （2D） rigid-plastic finite element （FE） method, the optimum observation area for metallographic microstructure and the influence of the height-diameter ratio on which were analyzed for the ...Based on two-dimensional （2D） rigid-plastic finite element （FE） method, the optimum observation area for metallographic microstructure and the influence of the height-diameter ratio on which were analyzed for the cylindrical samples with the diameter of 8 mm and different heights from 8 to 16 mm in nonuniform compressive experiments. It is shown that the representative metallographic observation area relevant to the applied deformation condition is located at about 0.835 of the radius from the center of the sample to the solder joint between the sample and the thermocouples. At the same time, the microstructure in that area is more appropriate as the height of the sample is 12 mm. The related parameters of GH4033 superalloy were adopted in the FE analysis, and the validity of this analysis was verified by the compressive experiments.展开更多
文摘As one of the most exciting inspection and powerful analysis methods in modern materials metallographic examinations, the difference interference contrast (DIC) method has many advantages, including relatively low requirement for specimen preparation, obvious relief senses observed under microscope. Details such as fine structures or defects that are not or barely visible in incident-light bright field, could be easily revealed and thus make materials analysis more reliable. Differential interference contrast produces an image that can be readily manipulated using digital and video imaging techniques to further enhance contrast. But, studies of material metallography based on DIC method have rarely carried out. Based on the fundamental principle of the DIC method combing with the computer image analysis, applications of DIC method in materials metallographic examination were investigated in this study.
文摘In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite morphology in Cu-Zn-Al SMA,i.e. plate, spean bamboo, noose, round-spot, line and dot-like martensites. During transformation and inverse-transformation, the thermoelastic martensites were rising and falling, growing and shrinking, splitting and merping. The growth patterns of thermoelastic martensite were divided into three types: fast growing, very slow ex-pansion and uniform automatic growth. Automatic growth appeared when ageing at a temperature below Ms. The result, for the first time, coofirmed Olson and Cohen,s suggestion that thermoelastic martensite may be automatically grown when ageing be-low Ms. With increasing numbers of thermal cycling, both the memory recovery ratio (% )and memory recoverp degradation (%) degraded logarithmically. The degrada-tion was steep in the initial stage and then became more and more gradual in the middle and the final stages caused by the stabilisation of martensite. In the initial stage, vacancies assumed the controlling role, while dislocations took the major role in other stages. The martensite transformation caused the intedeces to become bent and blurmd, but with increasing cycling numbers, the movements of interface had the same degradation effects as the memory recovery ratio curves. Under these conditions, we also found the martensites on one side of the intedece became reorientated and par-allel to the intedece. It was therefore concluded that the movement degradation of the interface and the appearance of bamboo like martensite induced the degradation of two way shape memory effect (TWMP).
文摘Submerged arc welding （SAW） has shortcoming of over heat input, which increases grain size in heat-affected zone （ HAZ） and decreases welding quality and mechanical properties of the joints serioasly. With improvements of welding equipment, direct current （ DC） pulsed SAW （ PSAW） was utilized successfully in the research. Comparing DC PSAW with DC common SAW （ CSAW） , the metallographic structure was analyzed with optical and electron microscope, the width of HAZ was measured as well as the width and hardness of the coarse grained HAZ （CGHAZ）. The research shows that DC PSAW joint had higher welding penetration, narrower HAZ and CGHAZ, which benefited HAZ performance and welding quality.
基金funded by the National Natural Science Foundation of China (Grant Nos.12302444 and 12202349)。
文摘An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of the fragments formed.This study investigated the fragmentation performance of a new high-carbon silicon-manganese(HCSiMn)steel cylindrical shell through fragment recovery experiments.Compared with the conventional 45Cr steel shell,the number of small mass fragments produced by the HCSi Mn steel shell was significantly increased with a scale parameter of 0.57 g fitted by the Weibull distribution model.The fragmentation process of the HCSi Mn shell exhibited more brittle tensile fracture characteristics,with the microcrack damage zone on the outer surface being the direct cause of its high fragmentation.On the one hand,the doping of alloy elements resulted in grain refinement by forming metallographic structure of tempered sorbite,so that microscopic intergranular fracture reduces the characteristic mass of the fragments;on the other hand,the distribution of alloy carbides can exert a"pinning"effect on the substrate grains,causing more initial cracks to form and propagate along the brittle carbides,further improving the shell fragmentation.Although the killing power radius for light armored vehicles was slightly reduced by about 6%,the dense killing radius of HCSiMn steel projectile against personnel can be significantly increased by about 26%based on theoretical assessment.These results provided an experimental basis for high fragmentation warhead design,and to some extent,revealed the correlation mechanism between metallographic structure and shell fragmentation.
基金supported by the Spanish“Plan Nacional de Investigación Científica,Desarrollo e Innovación Tecnológica,Ministerio de Economía y Competitividad(Instituto de Salud CarlosⅢ)”,Grant FIS PI20-0318 co-financed by“Fondo Europeo de Desarrollo Regional ERDF-FEDER European Union”Grant P18-RT-5059“Plan Andaluz de Investigación,Desarrollo e Innovación(PAIDI 2020),Consejería de Transformación Económica,Industria,Conocimiento y Universidades,Junta de Andalucía,Espana”(all to VC)Grant PPJIA202219“Ayudas del plan propio UGR 2022,Plan propio de investigación y transferencia,Universidad de Granada,Espana”(to JCA andóDGG)。
文摘The myelin sheath is a lipoprotein-rich,multilayered structure capable of increasing conduction velocity in central and peripheral myelinated nerve fibers.Due to the complex structure and composition of myelin,various histological techniques have been developed over the centuries to evaluate myelin under normal,pathological or experimental conditions.Today,methods to assess myelin integrity or content are key tools in both clinical diagnosis and neuroscience research.In this review,we provide an updated summary of the composition and structure of the myelin sheath and discuss some histological procedures,from tissue fixation and processing techniques to the most used and practical myelin histological staining methods.Considering the lipoprotein nature of myelin,the main features and technical details of the different available methods that can be used to evaluate the lipid or protein components of myelin are described,as well as the precise ultrastructural techniques.
基金supported by the National Natural Science Foundation of China (No. 51274062)
文摘Based on two-dimensional （2D） rigid-plastic finite element （FE） method, the optimum observation area for metallographic microstructure and the influence of the height-diameter ratio on which were analyzed for the cylindrical samples with the diameter of 8 mm and different heights from 8 to 16 mm in nonuniform compressive experiments. It is shown that the representative metallographic observation area relevant to the applied deformation condition is located at about 0.835 of the radius from the center of the sample to the solder joint between the sample and the thermocouples. At the same time, the microstructure in that area is more appropriate as the height of the sample is 12 mm. The related parameters of GH4033 superalloy were adopted in the FE analysis, and the validity of this analysis was verified by the compressive experiments.
