As one of the most exciting inspection and powerful analysis methods in modern materials metallographic examinations, the difference interference contrast (DIC) method has many advantages, including relatively low req...As one of the most exciting inspection and powerful analysis methods in modern materials metallographic examinations, the difference interference contrast (DIC) method has many advantages, including relatively low requirement for specimen preparation, obvious relief senses observed under microscope. Details such as fine structures or defects that are not or barely visible in incident-light bright field, could be easily revealed and thus make materials analysis more reliable. Differential interference contrast produces an image that can be readily manipulated using digital and video imaging techniques to further enhance contrast. But, studies of material metallography based on DIC method have rarely carried out. Based on the fundamental principle of the DIC method combing with the computer image analysis, applications of DIC method in materials metallographic examination were investigated in this study.展开更多
Submerged arc welding （SAW） has shortcoming of over heat input, which increases grain size in heat-affected zone （ HAZ） and decreases welding quality and mechanical properties of the joints serioasly. With improve...Submerged arc welding （SAW） has shortcoming of over heat input, which increases grain size in heat-affected zone （ HAZ） and decreases welding quality and mechanical properties of the joints serioasly. With improvements of welding equipment, direct current （ DC） pulsed SAW （ PSAW） was utilized successfully in the research. Comparing DC PSAW with DC common SAW （ CSAW） , the metallographic structure was analyzed with optical and electron microscope, the width of HAZ was measured as well as the width and hardness of the coarse grained HAZ （CGHAZ）. The research shows that DC PSAW joint had higher welding penetration, narrower HAZ and CGHAZ, which benefited HAZ performance and welding quality.展开更多
In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite mo...In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite morphology in Cu-Zn-Al SMA,i.e. plate, spean bamboo, noose, round-spot, line and dot-like martensites. During transformation and inverse-transformation, the thermoelastic martensites were rising and falling, growing and shrinking, splitting and merping. The growth patterns of thermoelastic martensite were divided into three types: fast growing, very slow ex-pansion and uniform automatic growth. Automatic growth appeared when ageing at a temperature below Ms. The result, for the first time, coofirmed Olson and Cohen,s suggestion that thermoelastic martensite may be automatically grown when ageing be-low Ms. With increasing numbers of thermal cycling, both the memory recovery ratio (% )and memory recoverp degradation (%) degraded logarithmically. The degrada-tion was steep in the initial stage and then became more and more gradual in the middle and the final stages caused by the stabilisation of martensite. In the initial stage, vacancies assumed the controlling role, while dislocations took the major role in other stages. The martensite transformation caused the intedeces to become bent and blurmd, but with increasing cycling numbers, the movements of interface had the same degradation effects as the memory recovery ratio curves. Under these conditions, we also found the martensites on one side of the intedece became reorientated and par-allel to the intedece. It was therefore concluded that the movement degradation of the interface and the appearance of bamboo like martensite induced the degradation of two way shape memory effect (TWMP).展开更多
文摘As one of the most exciting inspection and powerful analysis methods in modern materials metallographic examinations, the difference interference contrast (DIC) method has many advantages, including relatively low requirement for specimen preparation, obvious relief senses observed under microscope. Details such as fine structures or defects that are not or barely visible in incident-light bright field, could be easily revealed and thus make materials analysis more reliable. Differential interference contrast produces an image that can be readily manipulated using digital and video imaging techniques to further enhance contrast. But, studies of material metallography based on DIC method have rarely carried out. Based on the fundamental principle of the DIC method combing with the computer image analysis, applications of DIC method in materials metallographic examination were investigated in this study.
文摘Submerged arc welding （SAW） has shortcoming of over heat input, which increases grain size in heat-affected zone （ HAZ） and decreases welding quality and mechanical properties of the joints serioasly. With improvements of welding equipment, direct current （ DC） pulsed SAW （ PSAW） was utilized successfully in the research. Comparing DC PSAW with DC common SAW （ CSAW） , the metallographic structure was analyzed with optical and electron microscope, the width of HAZ was measured as well as the width and hardness of the coarse grained HAZ （CGHAZ）. The research shows that DC PSAW joint had higher welding penetration, narrower HAZ and CGHAZ, which benefited HAZ performance and welding quality.
文摘In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite morphology in Cu-Zn-Al SMA,i.e. plate, spean bamboo, noose, round-spot, line and dot-like martensites. During transformation and inverse-transformation, the thermoelastic martensites were rising and falling, growing and shrinking, splitting and merping. The growth patterns of thermoelastic martensite were divided into three types: fast growing, very slow ex-pansion and uniform automatic growth. Automatic growth appeared when ageing at a temperature below Ms. The result, for the first time, coofirmed Olson and Cohen,s suggestion that thermoelastic martensite may be automatically grown when ageing be-low Ms. With increasing numbers of thermal cycling, both the memory recovery ratio (% )and memory recoverp degradation (%) degraded logarithmically. The degrada-tion was steep in the initial stage and then became more and more gradual in the middle and the final stages caused by the stabilisation of martensite. In the initial stage, vacancies assumed the controlling role, while dislocations took the major role in other stages. The martensite transformation caused the intedeces to become bent and blurmd, but with increasing cycling numbers, the movements of interface had the same degradation effects as the memory recovery ratio curves. Under these conditions, we also found the martensites on one side of the intedece became reorientated and par-allel to the intedece. It was therefore concluded that the movement degradation of the interface and the appearance of bamboo like martensite induced the degradation of two way shape memory effect (TWMP).
