An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting ...An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51204054 and 51574084)the Fundamental Research Funds for the Central Universities of China(No.N150204009)the National Basic Research Priorities Program of China(No.2014CB643405)
文摘An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.
