Igneous intrusion contact metamorphic system and its reservoir characteristics:A case study of Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin,China

Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion.(1)A geological model of the igneous intrusion contact met amorphic system is proposed,which can be divided into five structural layers vertically:the intrusion,upper metamorphic aureole,lower metamorphic aureole,normal sedimentary layers on the roof and floor.(2)The intrusion is characterized by xenoliths indicating intrusive facies at the top,regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale,and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale.The metamorphic aureole has characteristics such as sedimentary rocks as the host rock,typical palimpsest textures developed,various low-temperature thermal metamorphic minerals developed,and medium-low grade thermal metamorphic rocks as the lithology.(3)The reservoir in contact metamorphic aureole has two types of reservoir spaces:matrix pores and fractures.The matrix pores are secondary"intergranular pores"distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones.The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones.The reservoirs generally have three spatial distribution characteristics:layered,porphyritic and hydrocarbon impregnation along fracture.(4)The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking.Furthermore,the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism,intrusive compression and hydrothermal dissolution.The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag,and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.

Structural Analysis for Qazzaz Metamorphic Core Complex,Northwestern Arabian Shield,Saudi Arabia

Identifying deformational mechanisms and associated structures at various scales,ranging from regional-scale structures to microscopic fabric,is crucial for the assessment of tectonic development.Thirty-three samples were taken from the Qazzaz metamorphic core complex to estimate the finite strain for felsic and mafic minerals.These samples included gneisses rocks,monzogranite,and metavolcano-sedimentary rocks for both the Thalbah and Bayda groups.Using the Rf/j and Fry methods,the axial ratios(XZ)range about 2.20 to 7.10 and 1.90 to 9.10,respectively.For various rock units,the strain measurements show moderate to highly deformation.Most of the observed samples show shallow WNW dipping along a N to WNW trend of finite strain(X).The short axes(Z)based to be subvertical foliation related with a subhorizontal foliation.The results demonstrate that contacts generated at semi-brittle to ductile deformation and that the strain of magnitude has the same value for different lithologic units.It concluded that nappe generation in orogens results from pure shear deformation.

Metamorphic P-T conditions and ages of garnet-biotite schists in the Dahongshan Group from the southwestern Yangtze Block

The Dahongshan Group,situated at the southwestern margin of the Yangtze Block,represents a geological unit characterized by relatively high-grade metamorphism in the region.This paper investigates the garnet-biotite schist from the Laochanghe Formation of the Dahongshan Group,employing an integrated approach that includes petrological analysis,phase equilibrium modeling,and zircon U-Pb dating.The schist is mainly composed of garnet,biotite,plagioclase,quartz,rutile,and ilmenite.Phase equilibrium modeling revealed the peak metamorphic conditions of 8-9 kbar and 635-675°C.By further integrating the prograde metamorphic profile of garnet and geothermobarometric results,a clockwise P-T metamorphic evolution path is constructed,which includes an increase in temperature and pressure during the prograde stage.LA-ICP-MS zircon U-Pb dating and zircon Ti thermometry constrains the post-peak metamorphic age of 831.2±7.2 Ma.Integrated with previously reported results,it is revealed that the southwestern margin of the Yangtze Block experienced a large-scale regional metamorphism during the Neoproterozoic(890-750 Ma),which is related to the collisional orogenic process.This may be associated with the late-stage assembly of the Rodinia supercontinent or with local compression and subduction processes during the breakup of the Rodinia supercontinent.

A multi-mineral model for predicting petrophysical properties of complex metamorphic reservoirs:Case study of the Bozhong Depression,Bohai Sea

Interpreting reservoir properties through log data and logging responses in complex strata is critical for efficient petroleum exploitation,particularly for metamorphic rocks.However,the unsatisfactory accuracy of such interpretations in complex reservoirs has hindered their widespread application,resulting in severe inconvenience.In this study,we proposed a multi-mineral model based on the least-square method and an optimal principle to interpret the logging responses and petrophysical properties of complex hydrocarbon reservoirs.We began by selecting the main minerals based on a comprehensive analysis of log data,X-ray diffraction,petrographic thin sections and scanning electron microscopy(SEM)for three wells in the Bozhong 19-6 structural zone.In combination of the physical properties of these minerals with logging responses,we constructed the multi-mineral model,which can predict the log curves,petrophysical properties and mineral profile.The predicted and measured log data are evaluated using a weighted average error,which shows that the multi-mineral model has satisfactory prediction performance with errors below 11%in most intervals.Finally,we apply the model to a new well“x”in the Bozhong 19-6 structural zone,and the predicted logging responses match well with measured data with the weighted average error below 11.8%for most intervals.Moreover,the lithology is dominated by plagioclase,K-feldspar,and quartz as shown by the mineral profile,which correlates with the lithology of the Archean metamorphic rocks in this region.It is concluded that the multi-mineral model presented in this study provides reasonable methods for interpreting log data in complex metamorphic hydrocarbon reservoirs and could assist in efficient development in the future.

Metamorphic P-T conditions and zircon U-Pb ages of amphibolite in Laojinchang area,southern Jilin Province

The Longgang Block is one of the most important parts of the eastern North China Craton,characterized by extensive Late Neoarchean(~2.5 Ga)granulite facies metamorphism.However,it remains uncertain whether it was influenced by Paleoproterozoic magmatism-metamorphism.The authors provide a comprehensive analysis of amphibolite in Laojinchang area,southern Jilin Province,through petrographic,geochemical,mineralogical,and zircon dating.The main findings are as follows:The mineral assemblage of amphibolite is Hb+Pl+Cpx+Bi+Kf+Q,characteristic of amphibolite facies;zircon U-Pb dating indicates that the metamorphic age of amphibolite is 1834±33 Ma;the amphibolite has geochemical characteristics of calcium alkaline,with depletion of Nb,Ta,Ti and P.The plagioclase in the amphibolite is oligoclase,belonging to acidic plagioclase.It is speculated that the protolith of the amphibolite is diorite;using geothermobarometer,the peak metamorphic P-T conditions of amphibolite are determined to be 536–593℃/3.4–5.0 kbar,and the post-peak conditions are 429–566℃/1.3–3.1 kbar.The above results indicate that the Paleoproterozoic metamorphism has been superimposed on Longgang Block,linked to a new orogenic event on the northern edge of North China Craton.

Structural,^(40)Ar/^(39)Ar Geochronological and Rheological Feature Analysis of the Guoxuepu Shear Zone:Indications for the Jitang Metamorphic Complex in the Northern Lancangjiang Zone

The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jitang metamorphic complex was determined.The macro-and microstructural analyses of the ductile detachment shear zone(Guoxuepu ductile shear zone,2–4 km wide)between the metamorphic complex and the overlying sedimentary cap show that the shear sense of the ductile shear zones is top-to-the-southeast.The presence of various deformation features and quartz C-axis electron backscatter diffraction(EBSD)fabric analysis suggests multiple deformation events occurring at different temperatures.The average stress is 25.68 MPa,with the strain rates(έ)ranging from 9.77×10^(−14)s^(−1)to 6.52×10^(−16)s^(−1).The finite strain of the Guoxuepu ductile shear zone indicates an elongated strain pattern.The average kinematic vorticity of the Guoxuepu ductile shear zone is 0.88,implying that the shear zone is dominated by simple shear.The muscovite selected from the protomylonite samples in the Guoxuepu ductile shear zone yields a 40Ar-39Ar age of 60.09±0.38 Ma.It is suggested that,coeval with the initial Indo–Eurasian collision,the development of strike-slip faults led to a weak and unstable crust,upwelling of lower crust magma,then induced the detachment of the Jitang metamorphic complex in the Eocene.

Report of 2.7 Ga zircon U-Pb age of orthogneiss in the Wenquan metamorphic complex,West Tianshan,China

1.Objective The Wenquan Group is one of the important medium-to low-grade metamorphic units within the Wenquan metamorphic complexes which distributes in Chinese segment of the Tianshan Belt,the southern part of the Central Asian Orogenic Belt.It mainly consists of pre-Neoproterozoic metamorphosed volcanic and sedimentary rocks(Wang B et al.,2014).

Petrochemical eigenvalues and diagrams for the identification of metamorphic rocks'protolith,taking the host rocks of Dashuigou tellurium deposit in China as an example

The Dashuigou tellurium deposit is the world’s only known independent tellurium deposit.By restoring metamorphic rocks’protolith,we seek to understand not only the development and evolution trajectory of the region but also the origin of the relevant deposits.While there are many ways to restore metamorphic rocks’protolith,we take the host metamorphic rocks of Dashuigou tellurium deposit and leverage various petrochemical eigenvalues and related diagrams previously proposed to reveal the deposit’s host metamorphic rocks’protolith.The petrochemical eigenvalues include molecular number,Niggli’s value,REE parity ratio,CaO/Al_(2)O_(3)ratio,Fe^(3+) /(Fe^(3+) -+Fe^(2+) )ratio,chondrite-normalized REE value,logarithmic REE value,various REE eigenvalues including scandium,Eu/Sm ratio,total REE amount,light and heavy REEs,δEu,Eu anomaly,Sm/Nd ratio,and silicon isotope δ^(30) SiNBS-29‰,etc.The petrochemical plots include ACMs,100 mg-c-(al+alk),SiO_(2)-(Na_(2)O+K_(2)O),(al+fm)-(c+alk)versus Si,FeO+Fe_(2)O^(3+) TiO)-Al_(2)O_(3)-MgO,c-mg,Al_(2)O_(3)-(Na_(2)O+K_(2)O),chondrite-normalized REE model,La/Yb-REE,and Sm/Nd ratio,etc.On the basis of these comprehensive analyses,the following conclusions are drawn,starting from the many mantle-derived types of basalt developed in the study area of different geological ages,combined with the previously published research results on the deposit s fluid inclusions and sulfur and lead isotopes.The deposit is formed by mantle degassing in the form of a mantle plume in the late Yanshanian orogeny.The degassed fluids are rich in nano-sc ale substances including Fe,Te,S,As,Bi,Au,Se,H_(2),CO_(2),N_(2),H_(2)O,and CH_(4),which are enriched by nano-effect,and then rise to a certain part of the crust in the form of mantle plume along the lithospheric fault to form the deposit.The ultimate power for tellurium mineralization was from H_(2)flow with high energy,which was produced through radiation from the melted iron of the Earth’s outer core.The H,flow results in the Earth’s degassing,as well as the mantle and crust’s uplift.

Comprehensive Review of Studies on Metamorphic Rocks

Marble is a metamorphic rock, which is one of the 3 basic rock types (magmatic, sedimentary, metamorphic) forming the earth’s crust. The major characteristic sought after in a rock mass in the field for it to be exportable and usable as marble is its suitability to be cut in blocks. In the process of producing marble slabs from marble blocks, the blocks are expected not to contain potentially problematic hard or weak zones and their geomechanical and chemical properties should conform to the relevant standards. Ignoring of the geological properties of the rock in the process of deciding for marble production at a marble site and determination of production location, direction and method is the most important parameter that would increase production loss. In order to reduce losses by determination of geological properties of marble, many academic studies have been conducted on the effects of water saturation, temperature, freezing and thawing on its mechanical and fracture properties. There are further studies on crack propagation in marble under stress. However, even those marble blocks that are obtained based on geological parameters may suffer serious cracks or fractures due to stresses caused by their weight and geometry. Therefore, cutting direction is of critical importance in order to minimize marble waste in the process of cutting a marble block which is brought to the inventory or processing site with cracks, cavities or fractures. Certain studies exist within such context, where the geometry of the discontinuity within a block is determined using non-destructive methods, such as ultrasonic testing, in order to determine the appropriate cutting direction. Such studies made use of ultrasonic waves to determine the physical and chemical structures of magmatic and sedimentary rocks by measuring the progress velocity of sonic waves in the rock. Said studies, however, mostly worked on sedimentary and magmatic rock specimens, focusing less on metamorphic rocks such as marble due to their anisotropic properties. Understanding the academic literature studies on marble would provide significant contribution to the reduction of production losses during the processing marble blocks in processing plants and the achievement of production efficiency levels that are within economic limits. Within such scope, this study has reviewed the past academic studies on marble, classified them under 6 categories, and comprehensively analyzed each category based on materials, testing setups, test specimens, test parameters and research techniques.

Case studies on testing with compositional metamorphic relations

Some metamorphic relations （MR） are not good at detecting faults in metamorphic testing. In this paper, the method of making compositional MR （CMR） based on the speculative law of proposition logic is presented. This method constructs new MRs by composing existing MRs in a pairwise way. Because CMR contains all the advantages of the MRs that form it, its fault detection performance is wonderful. On the other hand, the number of relations will decrease greatly after composing, so a program can be tested with much fewer test cases when CMRs are used. In order to research the characteristics of a CMR, two case studies are analyzed. The experimental results show that the CMR＇s performance is mostly determined by the central MRs forming it and the sequence of composition. Testing efficiency is improved greatly when CMRs are used.

Ontogeny and Metamorphic Patterns of Female Reproductive Organs of Ephedra sinica Stapf (Ephedraceae)

Ontogeny and metamorphic. development of female reproductive organs in Ephedra sinica Stapf were surveyed. At the end of April, female cones began to initialize from the vegetative buds. Pollination occurred in mid-May and seeds matured at the beginning of July. The ontogenetic pattern of female reproductive organs of E. sin ca is basically similar to that of E. distachya L. The foliar nature of the outer envelope of the ovule in Ephedra is corroborated. Reduction of ovule number as a tendency of speciation in the genus is substantiated by the occurrence of tri-ovulate cones coupled with comprehensive characters of the genus. The metamorphic patterns as well as the leaf nature of the outer envelope indicate that female cones of Ephedra are compound while the female reproductive units of the ovulate cone have been reduced from secondary reproductive shoots similar to those of cordaites by phylogenetic transformation, fusion and reduction. Each fertile bract together with its axillary female reproductive unit composed the Bract Scale and Seed Scale Complex of Ephedra.

Multistage Extension and Age Dating of the Xiaoqinling Metamorphic Core Complex,Central China

Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.

Subduction of Continental Crust in the Early Palaeozoic North Qaidam Ultrahigh-Pressure Metamorphic Belt, NW China:Evidence from the Discovery of Coesite in the Belt

Coesite was discovered as inclusions in zircon separates from pelitic gneissassociated with a large eclogite body in the North Qaidam ultrahigh-pressure (UHP) terrane. Somegraphite inclusions were also found. This finding suggested the occurrence of in-situ UHPmetamorphism and that the terrane was most likely recrystallized at pressures below the diamondstability field. It supported other previous indirect UHP evidence, such as polycrystalline quartzinclusions in eclogitic garnet, quartz lamellae in omphacite and P-T estimates for both eclogite andgarnet peridotite. The U-Pb and Sm-Nd ages of the North Qaidam eclogite indicated that subductionof continental crust occurred in the Early Palaeozoic, which probably recorded a collision betweenthe Sino-Korean and Yangtze plates.

Extension of the Louzidian Metamorphic Core Complex and Development of Supradetachment Basins in Southern Chifeng,Inner Mongolia,China

The Louzidian metamorphic core complex (LMCC) in southern Chifeng is located on the northern margin of the North China craton. Structural analyses of the LMCC and its extensional detachment system indicate that the LMCC experienced two-stage extension. The ductile regime experienced top-to-northeast shearing extension and the brittle detachment fault underwent top-down-outwards slipping. Between these two stages, a semi-ductile regime recorded the transition from ductile to brittle. The hanging wall of the detachment fault is similar to those classic supradetachment basins in western North America. Analyses of provenance and paleocurrent directions in the basins show that there were two filling stages. In the early stage, materials came from the southwest margin of the basin and the hanging wall of the detachment system and were transported from southwest to northeast; while in the late stage, deposits were derived from the footwall of the detachment fault and transported outwards to the two sides of the core complex. Since the filling period of the basins is from the late Jurassic to the late Cretaceous and it is coeval with the extension, the two filling stages reflect the two-stage history of the detachment fault. The large-scale late Jurassic underplating in the deep crust of the Chifeng area led to thickening and heating of the middle-upper crust and trigged the extension at depths and volcanism on the surface. In the early Cretaceous the upper plate of the detachment fault moved northeastwards and sediments were transported from southwest to northeast, while in the late Cretaceous the core complex was uplifted rapidly, the original basin was separated by the uplifted core, and lower-plate-derived debris was deposited in the adjacent upper-plate basins of the detachment fault. Evidentially, the development of the supradetachment basins were controlled by the extension and in turn the fillings in the basins recorded information of the extension, which has provided new evidence for kinematic interpretation of the Louzidian core complex.

A Biomimetic Study of Discontinuous-Constraint Metamorphic Mechanism for Gecko-Like Robot

Locomotion ability, efficiency and reliability are key targets for a good robot. The linkage mechanism for robot locomotion is a discontinuous-constraint metamorphic mechanism. Here we set up equations to present the discontinuous-constraint, point out that driving and controlling are the key points to improve the performance and efficiency of the linkage mechanism. Inspired by controlling strategy of the motor nervous system in peripheral vertebrae to the locomotion, we draw off motor control and drive strategy.

Post-Collisional Ductile Extensional Tectonic Framework in the UHP and HP Metamorphic Belts in the Dabie-Sulu Region, China

The present-day observable tectonic framework of the ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic belts in the Dabie-Sulu region was dominantly formed by an extensional process, mostly between 200 and 170 Ma, following the Triassic collision between the Sino-Korean and Yangtze cratons. The framework that controls the present spatial distribution of UHP and HP metamorphic rocks in particular displays the typical features of a Cordilleran-type metamorphic core complex, in which at least four regional-scale, shallow-dipping detachment zones are recognized. Each of these detachment zones corresponds to a pressure gap of 0.5 to 2.0 GPa. The detachment zones separate the rocks exposed in the region into several petrotectonic units with different P-T conditions. The geometry and kinematics of both the detachment zones and the petrotectonic units show that the exhumation of UHP and HP metamorphic rocks in the Dabie-Sulu region was achieved, at least in part, by non-coaxial ductile flow in the multi-layered detachment zones, and by coaxial vertical shortening and horizontal stretching in the metamorphic units, under amphibolite- to greenschist-facies conditions, and in an extensional regime. All ductile extensional deformations occurred at depths below 10 to 15 km, i.e. below the brittle/ductile deformation transition.

Application of General Shear Theory to the Study of Formation Mechanism of the Metamorphic Core Complex:A Case Study of Xiaoqinling in Central China

: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.

Constraint Force Analysis of Metamorphic Joints Based on the Augmented Assur Groups

In order to obtain a simple way for the force analysis of metamorphic mechanisms, the systematic method to unify the force analysis approach of metamorphic mechanisms as that of conventional planar mechanisms is proposed. A force analysis method of metamorphic mechanisms is developed by transforming the augmented Assur groups into Assur groups, so that the force analysis problem of metamorphic mechanisms is converted into the force analysis problems of conventional planar mechanisms. The constraint force change rules and values of metamorphic joints are obtained by the proposed method, and the constraint force analysis equations of revolute metamorphic joints in augmented Assur group RRRR and prismatic metamorphic joints in augmented Assur group RRPR are deduced. The constraint force analysis is illustrated by the constrained spring force design of paper folding metamorphic mechanism, and its metamorphic working process is controlled by the spring force and geometric constraints of metamorphic joints. The results of spring force show that developped design method and approach are feasible and practical. By transforming augmented Assur groups into Assur groups, a new method for the constraint force analysis of metamorphic joints is proposed firstly to provide the basis for dynamic analysis of metamorphic mechanism.

Petrology, Geochemistry and Tectonic Significance of the Metamorphic Peridotites from Longmuco-Shuanghu Ophiolitic Melange belt, Tibet

Taoxinghu metamorphic peridotite is a firstly reported mantle sequence of ophiolite since Longmuco-Shuanghu-Lancangjiang suture zone （LSLSZ） was proposed, and it is also an important discovered for ophiolite studying in central Qiangtang. Based on detailed analyses of whole-rock geochemistry of Taoxinghu metamorphic peridotites and contrast to metamorphic peridotites in typical ophiolites worldwide, the paper investigates their petrogenesis and geological implication. The petrologic results show that the protolith of Taoxinghu metamorphic perdotites have the mineral assemblage and texture characteristic of mantle peridotite. Most metamorphic peridotites hav near global abyssal peridotites major elements contents, while the few is similar to SSZ-type peridotites. They exhibit typically U-shaped REE patterns, characterized by slight enrichment of LREE and HREE relative to MREE and a low fractionated LREE to HREE segment. Trace elements contents are low and all samples are strong enrichment in Cs, U, Pb, weak enrichment in Ba and depletion in Th, but negative Nb anomalies are only observed in few samples. That suggests Taoxinghu metamorphic peridotites have depletion mantle and suprasubduction affinities. A two-stage evolution history is considered： Taoxinghu metamorphic peridotites originated as the residue from melting at a ridge with 7%-20% degree of fraction melting and were subsequently modified by interaction with mafic melt and aqueous fluid within mantle wedge on subducted zone. Combined with previous studies, we preliminarily propose Taoxinghu metamorphic peridotites may be the Products of initial rifting of palo-Tethys, forming at middle Ordivician-upper Cambrian, and they may be the direct evidences for spreading of palo-Tethys.

Petrology of the Non-mafic UHP Metamorphic Rocks from a Drillhole in the Southern Sulu Orogenic Belt,Eastern-Central China

The Drillhole ZK703 with a depth of 558 m is located in the Donghai area of the southern Sulu ultrahigh-pressure (UHP) metamorphic belt, eastern China, and penetrates typical UHP eclogites and various non-mafic rocks, including peridotite, gneiss, schist and quartzite. Their protoliths include ultramafic, mafic, intermediate, intermediate-acidic, acidic igneous rocks and sediments. These rocks are intimately interlayered, which are meters to millimeters thick with sharp and nontectonic contacts, suggesting in-situ metamorphism under UHP eclogite facies conditions. The following petrologic features indicate that the non-mafic rocks have experienced early-stage UHP metamorphism together with the eclogites: (1) phengite relics in gneisses and schists contain a high content of Si, up to 3.52 p.f.u. (per formula unit), while amphibolite-facies phengites have considerably low Si content (<3.26 p.f.u.); (2) jadeite relics are found in quartzite and jadeitite; (3) various types of symplectitic coronas and pseud