Drilling-based measuring method for the c-φ parameter of rock and its field application

The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.

HealthMeasures患者报告结局报告清单的解读

美国匹兹堡大学和HealthMeasures指导委员会及PROMIS健康组织标准委员会共同发表了HealthMeasures患者报告结局报告清单,旨在促进不同患者报告结局测量工具的标准化报告,帮助研究人员提高工具报告质量及结果解释的准确性,进一步改善跨研究间的比较分析。本文对HealthMeasures患者报告结局报告清单的主要内容进行介绍和解读,以期为中国患者报告结局研究者提供参考和借鉴。

Data-driven methods for predicting the representative temperature of bridge cable based on limited measured data

Cable-stayed bridges have been widely used in high-speed railway infrastructure.The accurate determination of cable’s representative temperatures is vital during the intricate processes of design,construction,and maintenance of cable-stayed bridges.However,the representative temperatures of stayed cables are not specified in the existing design codes.To address this issue,this study investigates the distribution of the cable temperature and determinates its representative temperature.First,an experimental investigation,spanning over a period of one year,was carried out near the bridge site to obtain the temperature data.According to the statistical analysis of the measured data,it reveals that the temperature distribution is generally uniform along the cable cross-section without significant temperature gradient.Then,based on the limited data,the Monte Carlo,the gradient boosted regression trees(GBRT),and univariate linear regression(ULR)methods are employed to predict the cable’s representative temperature throughout the service life.These methods effectively overcome the limitations of insufficient monitoring data and accurately predict the representative temperature of the cables.However,each method has its own advantages and limitations in terms of applicability and accuracy.A comprehensive evaluation of the performance of these methods is conducted,and practical recommendations are provided for their application.The proposed methods and representative temperatures provide a good basis for the operation and maintenance of in-service long-span cable-stayed bridges.

Improved spatio-temporal alignment measurement method for hull deformation

In this paper,an improved spatio-temporal alignment measurement method is presented to address the inertial matching measurement of hull deformation under the coexistence of time delay and large misalignment angle.Large misalignment angle and time delay often occur simultaneously and bring great challenges to the accurate measurement of hull deformation in space and time.The proposed method utilizes coarse alignment with large misalignment angle and time delay estimation of inertial measurement unit modeling to establish a brand-new spatiotemporal aligned hull deformation measurement model.In addition,two-step loop control is designed to ensure the accurate description of dynamic deformation angle and static deformation angle by the time-space alignment method of hull deformation.The experiments illustrate that the proposed method can effectively measure the hull deformation angle when time delay and large misalignment angle coexist.

A fast forward computational method for nuclear measurement using volumetric detection constraints

Owing to the complex lithology of unconventional reservoirs,field interpreters usually need to provide a basis for interpretation using logging simulation models.Among the various detection tools that use nuclear sources,the detector response can reflect various types of information of the medium.The Monte Carlo method is one of the primary methods used to obtain nuclear detection responses in complex environments.However,this requires a computational process with extensive random sampling,consumes considerable resources,and does not provide real-time response results.Therefore,a novel fast forward computational method(FFCM)for nuclear measurement that uses volumetric detection constraints to rapidly calculate the detector response in various complex environments is proposed.First,the data library required for the FFCM is built by collecting the detection volume,detector counts,and flux sensitivity functions through a Monte Carlo simulation.Then,based on perturbation theory and the Rytov approximation,a model for the detector response is derived using the flux sensitivity function method and a one-group diffusion model.The environmental perturbation is constrained to optimize the model according to the tool structure and the impact of the formation and borehole within the effective detection volume.Finally,the method is applied to a neutron porosity tool for verification.In various complex simulation environments,the maximum relative error between the calculated porosity results of Monte Carlo and FFCM was 6.80%,with a rootmean-square error of 0.62 p.u.In field well applications,the formation porosity model obtained using FFCM was in good agreement with the model obtained by interpreters,which demonstrates the validity and accuracy of the proposed method.

Monte Carlo method for evaluation of surface emission rate measurement uncertainty

The aim of this study is to evaluate the uncertainty of 2πα and 2πβ surface emission rates using the windowless multiwire proportional counter method.This study used the Monte Carlo method (MCM) to validate the conventional Guide to the Expression of Uncertainty in Measurement (GUM) method.A dead time measurement model for the two-source method was established based on the characteristics of a single-channel measurement system,and the voltage threshold correction factor measurement function was indirectly obtained by fitting the threshold correction curve.The uncertainty in the surface emission rate was calculated using the GUM method and the law of propagation of uncertainty.The MCM provided clear definitions for each input quantity and its uncertainty distribution,and the simulation training was realized with a complete and complex mathematical model.The results of the surface emission rate uncertainty evaluation for four radioactive plane sources using both methods showed the uncertainty’s consistency E_(n)<0.070 for the comparison of each source,and the uncertainty results of the GUM were all lower than those of the MCM.However,the MCM has a more objective evaluation process and can serve as a validation tool for GUM results.

Practice of Barrier Measures against COVID-19 Among Diabetic People Followed at Departmental University Hospital Center Ouémé-Plateau, Benin, in 2021

Introduction: COVID-19 is a pandemic disease caused by the coronavirus SARS-COV2 appeared in China in 2019. The aim of the study was to evaluate the practice of barrier measures against COVID-19 and to identify associated factors among diabetics followed at Departmental University Hospital Center Ouémé-Plateau, Benin, in 2021. Methods: This was a cross-sectional study conducted from June to August 2021, including diabetics aged 18 and over, hospitalized or received for medical visits in the department of medicine at the target hospital. Data were collected during an interview with each participant thanks to a questionnaire. “Good practice” was defined as regular practice of at least two of three barrier measures: hand washing, physical distancing and mask-wearing. Results: A total of 110 diabetics were included with a female predominance (55.5%) and a mean age of 57 ± 11.3 years. Among them, 89.1% washed their hands, 41.8% respected physical distancing and 12.7% wore a mask. The proportion of good practice was 47.3%. Only 5 practiced the three barrier measures. Only age group was associated with good practice. Conclusion: The study showed a low proportion of good practice of barrier measures against COVID-19 among diabetic people surveyed. It is important to continue the action for COVID-19 prevention among diabetic people in the targeted hospital and in other hospitals in Benin.

Socio-scientific quantification of the comprehensive benefits of debris flow mitigation measures for villages in western Sichuan, China

Debris flow hazards seriously threaten thesafety and sustainable development of mountainousareas. Numerous debris flow mitigation measures havebeen implemented worldwide;however, acomprehensive assessment of the specific disasterreduction effects of these measures and their economic,social and ecological benefits is yet to be performed.The western region of Sichuan Province frequentlysuffers from geohazards such as debris flow, and thegovernment has adopted many mitigation measures.This study assessed the benefits of debris flowmitigation measures and identified the key influencingfactors via a field-based study conducted in 81 villagesin western Sichuan province, China. A framework forthe evaluation of the benefits of rural debris flowmitigation measures was constructed andquantitatively evaluated using a survey. Snowballsampling was performed to recruit 81 village leadersand 468 farmers. The results showed that managementand engineering measures were the main methodsused to mitigate debris flow;ecological measures wereauxiliary. The average satisfaction scores of farmers forthese three types of measures were 4.07, 3.90, and 3.56,respectively (as measured on a five-point Likert scale).In contrast, in terms of the benefits of these mitigationmeasures, only a small proportion of villages (11.11%)obtained a high level of comprehensive benefits fromthe debris flow mitigation measures, while the majority(88.89%) received medium to low-level benefits. Toimprove this situation, we further studied and foundthat the main factors that restricted villages fromachieving high-level comprehensive benefits were theunpredictable nature of debris flows, labour forceoutflow and remoteness. Effective control measures, agood economic environment and strong governmentassistance were reported as crucial factors forimproving these comprehensive benefits. This studyprovides socio-scientific references for decisionmakingon rural debris flow mitigation measures while keeping villages at the centre of economic development.

Water-salt transport characteristics of saline soil under hydraulic remediation measures in the Yellow River Delta region of China

To understand the water-salt transport process of saline soils in the Yellow River Delta region under traditional hydraulic remediation measures and to determine its engineering parameters, in this study, laboratory investigations were made to measure the soil salt content using three remediation practices under simulated rainfall conditions. The results indicated that under the rainfall intensity of 100 mm/h, 6-8 h are needed when the soil salt content tends to be constant. The distribution of the salt content presents a typically symmetrical shape regardless of the position of the saline soil relative to the concealed pipe, the open ditch, and the vertical shaft. The two-parameter exponential function indicates the relationship between the soil desalination rate and the horizontal distance from the pipe, the ditch or the shaft. The maximum spacing to build the salt drainage engineering of the concealed pipe, the open ditch or the vertical shaft in the laboratory is 4.79 m, 2.88 m, and 2.19 m, respectively. The effectiveness of salt drainage for coastal saline soils can be ranked from largest to smallest as the concealed pipe, the open ditch and the vertical shaft. The findings provide an experimental basis and reference for the application of hydraulic measures to remediate saline soils in this region.

Adherence to Physical Measures during the SARS-COV2 Pandemic by Haemodialysis Patients in a Burkina Faso Tertiary Hospital: A Cross-Sectional Survey

Context: COVID-19 can spread rapidly in haemodialysis centres, leading to fatal outcomes. Implementing physical measures is crucial in limiting the spread of infection. Aims: To assess adherence to physical measures against SARS-Cov2 in haemodialysis patients. Methods and Material: From 13 to 19 July 2021, we administered the questionnaire to haemodialysis patients during or immediately after the dialysis session. The dependent variables were adherence to wearing masks, hand washing outside the dialysis centre, social distancing of at least 1.5 meters, and cough and sneeze hygiene. Statistical Analysis Used: Data were analyzed using Epi info software;descriptive statistics were presented as mean, headcount, and percentage;related factors were determined by multi-logistic regression. The significance level was 5%. The Health Research Ethics Committee approved the research protocol. Results: 142 patients were included (mean age: 42.5 ± 14 years). Wearing masks, hand-washing, social distancing, and coughing and sneezing hygiene were observed by 88%, 75%, 47%, and 60% of patients, respectively. Conclusion: Wearing masks was the most respected physical measure, while social distancing was the least respected.

Impact of Migrant Populations on Tuberculosis Rates in Saudi Arabia: Assessing How Migration Patterns Affect TB Incidence and Control Measures: A Narrative Review

This research focuses on the effects of migration on the TB infection rate and its prevention in Saudi Arabia, which has a large number of expatriates from TB-affected countries. Despite, based on the current global statistics of TB occurrence, it is evident that the national incidence of TB has reduced from 10.55 per 100,000 in 2015 to 8.36 per 100,000 in 2019;despite this, there are still some difficulties because migrants bring new strains of Mycobacterium tuberculosis. Hindrances, including language barriers and perceived immigration status, hinder patients from seeking medical attention or doctors from diagnosing diseases. Each patient and each cultural group need special attention to public health, enhancing living circumstances, and health care support. Community participation, inclusion of TB control programs into functional healthcare facilities, and the functioning of TB programs need to be stressed to address TB issues. Considering the focus on social, economic, and cultural approaches, the country can make severe advancements in TB control and population protection. This holistic analysis is critical for a long-term effective strategy to combat TB in the Kingdom.

Comparison study on measurement of rail weld joint between inertial reference method and multi-point chord reference method

Purpose – Straightness measurement of rail weld joint is of essential importance to railway maintenance. Dueto the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a5-m wavelength range, leaving a significant knowledge gap in this field.Design/methodology/approach – In this study, the authors used the well-established inertial referencemethod (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methodshave been applied in different types of rail straightness measurement trollies, respectively. These instrumentswere tested in a high-speed rail section within a certain region of China. The test results were ultimatelyvalidated through using traditional straightedge and feeler gauge methods as reference data to evaluate the railweld joint straightness within the 5-m wavelength range.Findings – The research reveals that IR-method and MCR-method produce reasonably similar measurementresults for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy forwavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed,carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.Originality/value – The research compare two methods’ measurement effects in a longer wavelength rangeand demonstrate the superiority of MCR-method.

On the Polygonal Wear Evolution of Heavy-Haul Locomotive Wheels due to Wheel/Rail Flexibility and Its Mitigation Measures

Wheel polygonal wear can immensely worsen wheel/rail interactions and vibration performances of the train and track,and ultimately,lead to the shortening of service life of railway components.At present,wheel/rail medium-or high-frequency frictional interactions are perceived as an essential reason of the high-order polygonal wear of railway wheels,which are potentially resulted by the flexible deformations of the train/track system or other external excitations.In this work,the effect of wheel/rail flexibility on polygonal wear evolution of heavy-haul locomotive wheels is explored with aid of the long-term wheel polygonal wear evolution simulations,in which different flexible modeling of the heavy-haul wheel/rail coupled system is implemented.Further,the mitigation measures for the polygonal wear of heavy-haul locomotive wheels are discussed.The results point out that the evolution of polygonal wear of heavy-haul locomotive wheels can be veritably simulated with consideration of the flexible effect of both wheelset and rails.Execution of mixed-line operation of heavy-haul trains and application of multicut wheel re-profiling can effectively reduce the development of wheel polygonal wear.This research can provide a deep-going understanding of polygonal wear evolution mechanism of heavy-haul locomotive wheels and its mitigation measures.

A novel indirect optical method for rock stress measurement using microdeformation field analysis

Stress measurement plays a crucial role in geomechanics and rock engineering,especially for the design and construction of large-scale rock projects.This paper presents a novel method,based on the traditional stress relief approach,for indirectly measuring rock stress using optical techniques.The proposed method allows for the acquisition of full-field strain evolution on the borehole’s inner wall before and after disturbance,facilitating the determination of three-dimensional(3D)stress information at multiple points within a single borehole.The study focuses on presenting the method’s theoretical framework,laboratory validation results,and equipment design conception.The theoretical framework comprises three key components:the optical imaging method of the borehole wall,the digital image correlation(DIC)method,and the stress calculation procedure.Laboratory validation tests investigate strain field distribution on the borehole wall under varying stress conditions,with stress results derived from DIC strain data.Remarkably,the optical method demonstrates better measurement accuracy during the unloading stage compared to conventional strain gauge methods.At relatively high stress levels,the optical method demonstrates a relative error of less than 7%and an absolute error within 0.5 MPa.Furthermore,a comparative analysis between the optical method and the conventional contact resistance strain gauge method highlights the optical method’s enhanced accuracy and stability,particularly during the unloading stage.The proposed optical stress measurement device represents a pioneering effort in the application of DIC technology to rock engineering,highlighting its potential to advance stress measurement techniques in the field.

Value of improved nursing measures and enhanced nursing management to reduce the occurrence of adverse events in pediatric infusion

BACKGROUND Intravenous infusion is a common method of drug administration in clinical practice.Errors in any aspect of the infusion process,from the verification of medical orders,preparation of the drug solution,to infusion by nursing staff,may cause adverse infusion events.AIM To analyzed the value of improving nursing measures and enhancing nursing management to reduce the occurrence of adverse events in pediatric infusion.METHODS The clinical data of 130 children who received an infusion in the pediatric department of our hospital from May 2020 to May 2021 were analyzed and divided into two groups according to the differences in nursing measures and nursing management:65 patients in the control group received conventional nursing and nursing management interventions,while 65 patients in the observation group received improved nursing measure interventions and enhanced nursing management.The occurrence of adverse events,compliance of children,satisfaction of children’s families,and complaints regarding the transfusion treatment were recorded in both groups.RESULTS The incidence of fluid extravasation and infusion set dislodgement in the observation group were 3.08%and 1.54%,respectively,which were significantly lower than 12.31%and 13.85%in the control group(P<0.05),while repeated punctures and medication addition errors in the observation group were 3.08%and 0.00%,respectively,which were lower than 9.23%and 3.08%in the control group,but there was no significant difference(P>0.05).The compliance rate of children in the observation group was 98.46%(64/65),which was significantly higher than 87.69%(57/65)in the control group,and the satisfaction rate of children’s families was 96.92%(63/65),which was significantly higher than 86.15%(56/65)in the control group(P<0.05).The observation group did not receive any complaints from the child’s family,whereas the control group received four complaints,two of which were due to the crying of the child caused by repeated punctures,one due to the poor attitude of the nurse,and one due to medication addition errors,with a cumulative complaint rate of 6.15%.The cumulative complaint rate of the observation group was significantly lower than that of the control group(P<0.05).CONCLUSION Improving nursing measures and enhancing nursing management can reduce the incidence of fluid extravasation and infusion set dislodgement in pediatric patients,improve children’s compliance and satisfaction of their families,and reduce family complaints.

Influencing factors and preventive measures of infectious complications after intestinal resection for Crohn’s disease

The incidence of Crohn’s disease(CD)has increased in recent years,with most patients requiring intestinal resection.Complications after intestinal resection for CD can lead to poor prognosis and recurrence,among which infectious complic-ations are the most common.This study aimed to investigate the common risk factors,including medications,preoperative nutritional status,surgery-related factors,microorganisms,lesion location and type,and so forth,causing infectious complications after intestinal resection for CD,and to propose corresponding preventive measures.The findings provided guidance for identifying suscept-ibility factors and the early intervention and prevention of infectious complic-ations after intestinal resection for CD in clinical practice.

Influence of Lightning Disaster on Cities and Lightning Defense Measures

Under the influence of special terrain and climatic conditions,lightning weather in Ulanqab City is more frequent from June to August,and lightning disaster has become one of the important tasks of disaster prevention and mitigation.In this paper,based on the characteristics of lightning weather in Ulanqab City,the impact of lightning disaster on the city was analyzed,and lightning protection measures,such as strengthening supervision of lightning protection safety,establishing a long-term lightning protection mechanism,doing a good job in lightning protection construction and detection in key places,and further improving public awareness of lightning protection,were put forward to reduce and avoid urban lightning disasters as much as possible and ensure urban safety.

On Adaptation Measures to Solve Tel-Aviv’s Environmental Problems with “Sunny Rain”

Adaptation measures were proposed using“Sunny Rain”to solve Tel Aviv’s environmental problems to cool the air in the city and save humanity from climate catastrophe and fight air pollution;the Yarkon,“Tel Aviv’s main river”will no longer be a dirty ditch;the fog from Ben-Gurion Airport was cleaned;neighborhoods,parks,around Tel Aviv were greened and all green spaces were irrigated with“Sunny Rain”.

Distribution Line Longitudinal ProtectionMethod Based on Virtual Measurement Current Restraint

As an effective approach to achieve the“dual-carbon”goal,the grid-connected capacity of renewable energy increases constantly.Photovoltaics are the most widely used renewable energy sources and have been applied on various occasions.However,the inherent randomness,intermittency,and weak support of grid-connected equipment not only cause changes in the original flow characteristics of the grid but also result in complex fault characteristics.Traditional overcurrent and differential protection methods cannot respond accurately due to the effects of unknown renewable energy sources.Therefore,a longitudinal protection method based on virtual measurement of current restraint is proposed in this paper.The positive sequence current data and the network parameters are used to calculate the virtual measurement current which compensates for the output current of photovoltaic(PV).The waveform difference between the virtual measured current and the terminal current for internal and external faults is used to construct the protection method.An improved edit distance algorithm is proposed to measure the similarity between virtual measurement current and terminal measurement current.Finally,the feasibility of the protection method is verified through PSCAD simulation.

Phase-Based Optical Flow Method with Optimized Parameter Settings for Enhancing Displacement Measurement Adaptability

To enhance the applicability and measurement accuracy of phase-based optical flow method using complex steerable pyramids in structural displacement measurement engineering applications, an improved method of optimizing parameter settings is proposed. The optimized parameters include the best measurement points of the Region of Interest (ROI) and the levels of pyramid filters. Additionally, to address the issue of updating reference frames in practical applications due to the difficulty in estimating the maximum effective measurement value, a mechanism for dynamically updating reference frames is introduced. Experimental results demonstrate that compared to representative image gradient-based displacement measurement methods, the proposed method exhibits higher measurement accuracy in engineering applications. This provides reliable data support for structural damage identification research based on vibration signals and is expected to broaden the engineering application prospects for structural health monitoring.