Simple and effective method for treating severe adult skeletal class II malocclusion: A case report

BACKGROUND Severe skeletal class II malocclusion is the indication for combined orthodontic and orthognathic treatment.CASE SUMMARY A woman with a chief complaint of a protruding chin and an inability to close her lips requested orthodontic camouflage.The treatment plan consisted of extracting the right upper third molar,right lower third molar,left lower second molar,and left upper third molar and moving the maxillary dentition distally using a convenient method involving microimplant nail anchors,push springs,long arm traction hooks,and elastic traction chains.After 52 months of treatment,her overbite and overjet were normal,and her facial profile was favorable.CONCLUSION This method can be used for distal movement of the maxillary dentition and to correct severe skeletal class II malocclusion in adults.

TEST METHOD EFFECT ON WRITING PERFORMANCE

The main objective of this paper was to investigate the test method effect of two writing tests on the performances of sixty sophomore English majors from China University of Mining and Technology, who were divided randomly into two experiment groups and took a reading-integrated writing test and a timed impromptu essay test respectively. Their essays were rated anonymously by two independent raters using the same rating scale with categories that measured content, organization, accuracy and vocabulary. Besides examination of the reliability, Many-Faceted Rasch analysis was applied to probe into the influence of domain difficulty and rater severity. Results of the comparison revealed four important findings. First, both two tests were reliable to be fair measures for assessing writing abilities. Second, significant difference was found between two groups in content, organization, and vocabulary, but no difference was observed in accuracy. Third, the reading tasks facilitated participants in generating ideas, organizing essays and using vocabularies. Finally, compared with the participants in the reading-integrated writing test, participants in the timed impromptu essay test met difficulties in using their vocabularies in the writing process. Findings implicated that 1) a reading-integrated writing test could be an alternative to a timed impromptu essay test in academic contexts, and 2) much more investigation was still needed to probe into the writing process and read-to-write process.

What is the Most Effective Method of Error Correction in L2 Writing?

The efficacy of error correction and various kinds of correction approaches is one of the key issues in second language writing faced by both teachers and researchers. The current paper reviews the definition of error correction and examines the different views on whether error correction in L2 writing should be corrected. In particular, the paper discusses and analyses the three common correction methods: direct correction, peer feedback and indirect correction. Teachers are encouraged to weigh and analyze the advantages and disadvantages of these methods according to the current literature, employ the most beneficial error correction method in L2 writing, and adapt its suitability to their teaching context.

Types and Correction Methods of Matrix Effect during Zircon LA-ICP-MS U-Pb Dating

Matrix effect primarily impacts the accuracy and precision of zircon LA-ICP-MS U-Pb data.This paper describes three types of matrix effect in zircon LA-ICPMS U-Pb dating,i.e.,the element matrix effect,high Ddpa or uranium matrix effect and alpha dose matrix effect,and illustrates the correction of these three effects.In addition,we point out the limitation and possible problems of the existing correction methods.

Novel implementation of homogenization method to predict effective properties of periodic materials

Representative volume element （RVE） method and asymptotic homogenization （AH） method are two widely used methods in predicting effective properties of pe- riodic materials. This paper develops a novel implementa- tion of the AH method, which has rigorous mathematical foundation of the AH method, and also simplicity as the RVE method. This implementation can be easily realized using commercial software as a black box, and can use all kinds of elements available in commercial software to model unit cells with rather complicated microstructures, so the model may remain a fairly small scale. Several examples were car- fled out to demonstrate the simplicity and effectiveness of the new implementation.

RANDOM MICROSTRUCTURE FINITE ELEMENT METHOD AND ITS VERIFICATION FOR EFFECTIVE PROPERTIES OF COMPOSITE MATERIALS

The present study aims at developing a new method-RandomMicrostructure Finite Element Method (RMFEM) for the effectiveproperties of com- Posite materials. In this method, a randommicrostructure Model is used to simulate the microstructure of thereal composite materials. The physical fields in such a randomMicrosturucture model under specified boundary and initial Conditionsare analyzed by finite element method.

A case of 9p deletion syndrome with congenital infantile glaucoma,effective method of diagnosis,and treatment

Dear Editor,I am Dr.Jia X from the Department of Ophthalmology,Second Xiangya Hospital,Central South University,Changsha,China.I write to present a rare case report of 9p deletion syndrome with congenital infantile glaucoma in an infant,accompanying with an effective method of both diagnosis and treatment.

EFFECT OF DIFFERENT OPERATION METHODS ON METHANE HYDRATE FORMATION

Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in gas hydrate. The relationships of hydrate rate, capacity and liquid temperature versus time were derived and three results were contrasted. The experimental results show lowtemperature and constant-pressure method is better than the other two methods because it's operation period is shorter and storage capacity is larger than the other two. Low-temperature and constant-pressure method is the best method. So new method will be new research objective.

Effectiveness of Using Project Method in Teaching Professional Foreign Language

The purpose of the paper is to demonstrate the effectiveness of using project method in teaching professional English in non-linguistic colleges. The main principles of project teaching, the technology of its adoption in teaching process, and some kinds of projects used in studying are reviewed. During the research the following methods were used： theoretical analysis, empirical, and statistical. While studying the course ＂Professional foreign language＂, the monitoring of effectiveness of project method use in teaching a foreign language was made. Monitoring was conducted under the following criteria： percent of progress, percent of quality of knowledge, and the level of motivation in studying English. The experience showed that in the process of project work learners＇ general educational abilities, special abilities, and communication abilities are developed.

Effects of Numerical Methods on the Calculation of Developing Plane Channel Flow

In wall-bounded turbulent flow calculations, the past focus has been directed to the modelling of the Reynolds-stress gradients. Not much attention has been paid to the effects of the numerical methods used to calculate these terms and the modelled equations. Discrepancies between model calculations and measurements are quite often attributed to incorrect modelling, while the suitability and accuracy of the numerical methods used are seldom scrutinized. Instead, alternate near-wall and Reynolds-stress models are proposed to remedy the incorrect turbulent flow calculations. On the other hand, if care is not taken in the numerical treatment of the Reynolds-stress gradient terms, physically unrealistic results and solution instability could occur. Previous studies by the author and his collaborators on the effects of numerical methods have shown that some of the more commonly used numerical methods could enhance numerical stability in the solution procedure but would introduce considerable inaccuracy to the results. The flow cases chosen to demonstrate these inaccuracies are a backstep flow and flow in a square duct, where flow complexities are present. The current investigation attempts to show that the above-mentioned effects of numerical methods could also occur in the calculation of a developing plane channel flow, where flow complexities are absent. In addition, this study shows that the results thus obtained lead to a predicted skin friction coefficient that is influenced more by the numerical method used than by the turbulence model invoked. Together, these results show that numerical treatment of the Reynolds-stress gradients in the equations play an important role, even for a developing plane channel flow.

On the parameters for electrocaloric effect predicted by indirect method

The influences of specific heat capacity CP, temperature step ？T, electric field step ？E, and initial electric field E1 on predicted electrocaloric（EC） temperature ？T of monodomain Ba TiO3 are examined by combining the Maxwell equation and phenomenological theory. Since the procedure is similar to indirect measurement of the EC effect, the results can serve as a reference for experiments. The results suggest that（i） it is reasonable to use zero-field CP,（ii） optimized ？T should be 2 K,（iii） it is better to keep △E 〈 EC, and（iv） E1〈 EC. Here, EC is the coercive field of material.

RANDOM MICROSTRUCTURE FINITE ELEMENT METHOD FOR EFFECTIVE NONLINEAR PROPERTIES OF COMPOSITE MATERIALS

Some theoretical methods have been reported to deal with nonlinear problems of composite materials but the accuracy is not so good. In the meantime, a lot of linear problems are difficult to be managed by the theoretical methods. The present study aims to use the developed method, the random microstructure finite element method, to deal with these nonlinear problems. In this paper, the random microstructure finite element method is used to deal with all three kinds of nonlinear property problems of composite materials. The analyzed results suggest the influences of the nonlinear phenomena on the effective properties of composite materials are significant and the random microstructure finite element method is an effective tool to investigate the nonlinear problems.

Efficiency and Effectiveness Method versus ε-NTU Method with Application in Finned Flat Tube Compact Heat Exchanger with Water-Ethylene Glycol as Nanofluid Base of Iron Oxide Nanoparticles

This work aims to establish comparisons between two models used for the performance of heat exchangers. The chosen system, in this case, consists of a heat exchanger used in automotive radiators flat finned tube type. Water and ethylene glycol compound as base fluid and volume fractions of iron oxide nanoparticles (Fe3O4) are used as a refrigerant. The quantities determined in this work are the nanofluid exit temperature, the air exit temperature, the absolute error between the models for heat transfer rate, and Effectiveness. The quantities that constitute parameters, independent variables, are the airflow, represented by the Reynolds number, and the iron oxide volume fraction. Ethylene Glycol 50% compound has slightly better thermal performance than pure water and reduces the reactive effect of water on the environment, increasing the average life of the equipment. The absolute relative error between the models is less than 20% and presents maximum values with the increase of the nanoparticle volume fraction and growth in the Reynolds number for the air.

Effects of Different Storage Methods and Storage Time on the Quality of Codonopsis pilosula

[Objectives]To study the effects of different storage methods and storage time on the quality of Codonopsis pilosula.[Methods]Experiment was performed by setting three different storage methods and times.[Results]When stored for 12 months,the extract content in the natural storage,conventional sealing,and controlled atmosphere storage was slightly lower than 77.32%before storage,and decreased by 2.82%,3.62%,and 1.71%,respectively.When stored for 18 months,the extract content was 74.14%,73.21%,and 72.08%,decreased by 4.11%,5.31%,and 6.78%,respectively compared with that before storage,all of which met the specified content in Chinese Pharmacopoeia.[Conclusions]The three storage times had significant effects on moisture and extract content of C.pilosula,but had no significant effects on atractylenolide III.With the extension of storage time,the moisture,extract,and content declined,so the storage time theoretically should not exceed 12 months.

Mass scale screening of common arboviral infections by an affordable,cost effective RT-PCR method

Objective:To develop a rapid,cost effective RT-PCR method for the mass scale diagnosis of such diseases at the vireraia stage to find out the actual disease burden in that area.Methods:For this purpose,cases with the history of only short febrile illness were considered.Thus 157 samples with the history of dengue/chikungunya like illness and only 58 samples with a history of acute encephalitis syndrome(AES)were selected.Results:Out of 157 samples,42 and 74 were detected as dengue and chikungunya,respectively and out of 58 AES cases only 23 could be detected as Japanese encephalitis by this RT-PCR method.Conclusions:This cost effective RT-PCR method can detect the total positive cases that remain undetected by EL1SA method.Moreover,this method is capable to detect the viral RNA from patients'sera even after the appearance of IgM antibody at one fifth costs as compared with the other commercially available kits.

Synthesis and Characterization of Alumina-Zirconia Powders Obtained by Sol-Gel Method: Effect of Solvent and Water Addition Rate

The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using aluminum tri-sec-butoxide and zirconium n-propoxide as precursors. Ethanol (EtOH), isopropanol (iPrOH) and isobutanol (iBuOH) were used as solvents. The Al2O3-ZrO2 powders were characterized by nitrogen physisorption (SBET), Fourier transformed infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Prepared oxides calcined at 700℃ showed high specific surface area (200 - 240 m2/g). Obtained results suggest that the homogeneity of the mixed oxides is favored by using a water addition rate of 0.06 and 0.10 mL/min with ethanol as solvent.

A method to calculate effective Hamiltonians in quantum information

Effective Hamiltonian method is widely used in quantum information. We introduce a method to calculate effective Hamiltonians and give two examples in quantum information to demonstrate the method. We also give a relation between the effective Hamiltonian in the Shr?dinger picture and the corresponding effective Hamiltonian in the interaction picture.Finally, we present a relation between our effective Hamiltonian method and the James–Jerke method which is currently used by many authors to calculate effective Hamiltonians in quantum information science.

Monitoring bioaccumulation and toxic effects of hexachlorobenzene using the polyurethane foam unit method in the microbial communities of the Fuhe River,Wuhan

Hexachlorobenzene （HCB） is a chlorinated aromatic hydrocarbon that was widely used for seed dressing in prevention of fungal growth on crops, and also as a component of fireworks, ammunition, and synthetic rubbers. Because of its resistance to degradation and mobility, HCB is widely distributed throughout the environment and is accumulated through food chains in different ecosystems. In this study, a preliminary investigation was carried out on the bioaccumulation and the toxic effects of HCB in the microbial （protozoan in particular） communities in the Fuhe River, Wuhan, a water body receiving industrial wastewaters containing HCB and other pollutants, using the standardized polyurethane foam units （PFU） method. Field samples were taken from eight stations established along the Fuhe River in January and August 2006. The concentration ratios of HCB in microbial communities and in water were 9.66-18.64, and the microbial communities accumulated 13.29-56.88 μg/L of HCB in January and 0.82-10.25 μg/L HCB in August. Correlation analysis showed a negative correlation between the HCB contents in the microbial assemblage, and the number of species and the diversity index of the protozoan communities. This study demonstrated the applicability of the PFU method in monitoring the effects of HCB on the level of microbial communities.

Influence enhancement effect of bi-frequency ultrasonic irradiation by TA fluorescence method

Based on a previous research of cavitation effect under bi-frequency ultrasound irradiation, this paper studies bi-frequency irradiations with similar experimental settings. The additional irradiation sources with frequencies of 1.04MHz, 0.8MHz and 1.7MHz are individually combined with the main ultrasonic irradiation source with frequency of 28kHz to form bi-frequency ultrasonic irradiation. The intensity of 28kHz irradiation was fixed at 12.5W/cm^2, while the intensity of the ultrasound at the other three frequencies is varied from1 W/cm^2 to 18 W/cm^2. It turns out that under the influence of the bi-frequency irradiation, the fluorescence intensity is obviously greater than the sum of those at individual frequencies. So the frequency of the additional sonication strikingly influences the fluorescence enhancement effect. For example, the fluorescence enhancement effect of 1.04MHz is stronger than that of 1.7MHz, and the enhancement effect of 0.8MHz is further stronger than that of 1.04MHz. Under the sonic intensity of (7.9)W/cm^2, the fluorescence intensity of 1.04MHz is approximately twice that of 1.7MHz while the fluorescence intensity of 0.8MHz is approximately 1.5 times that of 1.04MHz.