Bound-Preserving Discontinuous Galerkin Methods with Modified Patankar Time Integrations for Chemical Reacting Flows

In this paper,we develop bound-preserving discontinuous Galerkin(DG)methods for chemical reactive flows.There are several difficulties in constructing suitable numerical schemes.First of all,the density and internal energy are positive,and the mass fraction of each species is between 0 and 1.Second,due to the rapid reaction rate,the system may contain stiff sources,and the strong-stability-preserving explicit Runge-Kutta method may result in limited time-step sizes.To obtain physically relevant numerical approximations,we apply the bound-preserving technique to the DG methods.Though traditional positivity-preserving techniques can successfully yield positive density,internal energy,and mass fractions,they may not enforce the upper bound 1 of the mass fractions.To solve this problem,we need to(i)make sure the numerical fluxes in the equations of the mass fractions are consistent with that in the equation of the density;(ii)choose conservative time integrations,such that the summation of the mass fractions is preserved.With the above two conditions,the positive mass fractions have summation 1,and then,they are all between 0 and 1.For time discretization,we apply the modified Runge-Kutta/multi-step Patankar methods,which are explicit for the flux while implicit for the source.Such methods can handle stiff sources with relatively large time steps,preserve the positivity of the target variables,and keep the summation of the mass fractions to be 1.Finally,it is not straightforward to combine the bound-preserving DG methods and the Patankar time integrations.The positivity-preserving technique for DG methods requires positive numerical approximations at the cell interfaces,while Patankar methods can keep the positivity of the pre-selected point values of the target variables.To match the degree of freedom,we use polynomials on rectangular meshes for problems in two space dimensions.To evolve in time,we first read the polynomials at the Gaussian points.Then,suitable slope limiters can be applied to enforce the positivity of the solutions at those points,which can be preserved by the Patankar methods,leading to positive updated numerical cell averages.In addition,we use another slope limiter to get positive solutions used for the bound-preserving technique for the flux.Numerical examples are given to demonstrate the good performance of the proposed schemes.

Analysis of the Cicatricial Acceleration Method (MAC®) in Skin Repair in Wistar Rattus norvegicus with Induced Chemical Burns

Introduction: The cicatricial acceleration method (MAC®) promotes photobiological effects of an anti-inflammatory and healing nature. Its therapeutic radiation is emitted, producing photobiostimulant effects that result in rapid tissue repair and better tissue quality. The treatment of burns has always been a challenge, which involves both performing surgery and controlling and guiding scar regeneration, avoiding possible morbidities. Objective: To evaluate the effects of applying the MAC methodology with an AlGa (aluminum, gallium arsenide) laser on the time and quality of tissue repair in the skin of rats after induced chemical burns. Method: 22 adult male rats were subjected to a second-degree chemical burn on the back using 50% trichloroacetic acid. After the burns, the animals were randomly separated into 2 groups: control and experimental. The control group (G1) received placebo laser therapy and the laser group (G2) underwent laser irradiation with an energy density of 100 J/cm2. Histological analysis and macroscopic evaluation were carried out by means of the paper template method. Results: Group G1 showed (53%) of the necrosis area and group G2 showed (11%) necrosis area. Conclusion: The cicatricial acceleration method (MAC®) favored the repair of wounds caused by a 2nd-degree chemical burn, optimizing time and improving quality.

Emergency control of Spartina alterniflora re-invasion with a chemical method in Chongming Dongtan,China

The exotic species Spartina alterniflora(S.alterniflora)seriously threatens the stability and functioning of saltmarsh ecosystems in the Yangtze Estuary.Ambitious efforts have been undertaken to control this species,but subsequent re-invasion is frequent,presenting a significant barrier to restoration.The complexity and high cost of integrated physical control programs has necessitated a shift in focus,leading to considerable attention being paid to the potential of herbicides to control S.alterniflora.To find a strategy for emergency control of small and scattered patches of re-invading S.alterniflora,an in situ field experiment using Gallant(Haloxyfop-R-methyl)herbicide was conducted.The growth parameters of plant density and height were used to evaluate the control efficiency of different treatment dosages and times and sediment samples were taken for environmental toxicity analysis.The results show the following:(1)the control efficacy of the maximum proposed application dose(2.70 g/m2)was 92%for continuous swards and 100%for small patches,while those of other dosages(0.45 g/m2,0.90 g/m2,and 1.35 g/m2)were lower than 40%;(2)the appropriate implementation time was July to August with 100%mortality resulting from a single application,while S.alterniflora was shown to be capable of recovering rapidly after treatment in May;and(3)there were no significant differences in the community structure of meiofauna among the herbicide treatments and the control,and no herbicide residues were detected in sediment samples collected from treatment areas.This chemical control method was implemented in the Shanghai Chongming Dongtan National Bird Nature Reserve(CDNR).The results of this study indicate that Gallant is an environmentally friendly herbicide with high efficiency,which can be adopted for emergency control of re-invading S.alterniflora.

Improvements of marine clay slurries using chemicale-physical combined method(CPCM)

In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization and vacuum preloading （VP）, while CPCM2 is similar to CPCM1 but includes boththe application of surcharge and use of geo-bags to provide confinement during surcharge preloading.The key advantage of CPCM2 using geo-bags is that the surcharge can be immediately applied on thechemically stabilized slurries. Two types of geo-bags were investigated under simulated land filling anddyke conditions, respectively. The test results show that the shear strength （cu） of treated slurry byCPCM2 is generally much higher than that by CPCM1. Besides, the use of CPCM2 can significantly reducethe treatment time due to the short drainage paths created by geo-bags. Overall, CPCM2 allows fasterconsolidation and higher preloading that help to achieve higher mechanical properties of the stabilizedslurry. There are consistent relationships between cU and water content of slurries treated by CPCM2.Several important observations were also made based on comparisons of experimental data. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Source Apportionment of Ambient PM_(10) in the Urban Area of Longyan City,China:a Comparative Study Based on Chemical Mass Balance Model and Factor Analysis Method

In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.

Effects of Varieties and Cooking Methods on Physical and Chemical Characteristics of Cooked Rice

To analyze the effect of different lowland rice varieties and different cooking methods on physical and chemical characteristics of cooked rice. A factorial randomized block design with two factors was used and each combination of the factors was repeated three times. The first factor was rice variety（Ciherang and Ciliwung） and the second factor was the cooking method（stovetop, boiling and steaming, and rice cooker）. Results showed that Ciherang and Ciliwung varieties were classified into slender grain rice type with yellowred color. The amylose content of Ciherang was classified as moderate, while the amylose content of Ciliwung classified as low. The most abundant amino acid contained in Ciherang and Ciliwung varieties was glutamic acid. Statistical analysis showed that cooking method had significant effects on texture, lightness, chroma, hue and moisture content of cooked rice. Rice cooked with liwet method had the lowest texture value, lowest lightness value, highest chroma value, and highest moisture content.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of the Total Carbon by Combustion Gravimetric Method

GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon with combustion gravimetric method.

Chemical Analysis Method for Magnesia and Magnesia-Alumina Refractories——Gravimetric-Molybdenum Blue Photometric Method for Determination of Silicon Dioxide Content

This standard specifies the gravimetric-molybdenum blue photometric method for determination of silicon dioxide content.

The Study of Alcoholysis of 1,2-Thiazetidine-l,l-dioxide with Quantum Chemical Method

The alcoholysis mechanism of 1,2-thiazetidine-1,1-dioxide with methanol, in which the relatively stable product is sulfonate ester, has been investigated by quantum chemical method. Our calculations indicate the reaction for alcoholysis of 1,2-thiazetidine-1,1-dioxide proceeds via two possible mechanisms: concerted and stepwise. In the stepwise mechanism, two possible reaction pathways can be followed while only one possible reaction pathway can be followed in the concerted mechanism.

First-Principles Methods in the Investigation of the Chemical and Transport Properties of Materials under Extreme Conditions

Earth is a dynamic system. The thermodynamics conditions of Earth vary drastically depending on the depth, ranging from ambient temperature and pressure at the surface to 360 GPa and 6600 K at the core. Consequently, the physical and chemical properties of Earth’s constituents (e.g., silicate and carbonate minerals) are strongly affected by their immediate environment. In the past 30 years, there has been a tremendous amount of progress in both experimental techniques and theoretical modeling methods for material characterization under extreme conditions. These advancements have elevated our understanding of the properties of minerals, which is essential in order to achieve full comprehension of the formation of this planet and the origin of life on it. This article reviews recent computational techniques for predicting the behavior of materials under extreme conditions. This survey is limited to the application of the first-principles molecular dynamics (FPMD) method to the investigation of chemical and thermodynamic transport processes relevant to Earth Science.

Characterization of Calcined Kaolin/TiO_2 Composite Particle Material Prepared by Mechano-Chemical Method

Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron microscope （SEM） were used to investigate the microstructures and morphologies, respectively. The mechanism of the mechano-chemical reaction between calcined kaolin and TiO2 was studied by infrared spectra （IR）. The results show that TiO2 coats evenly on the surfaces of calcined kaolin particles by Si-O-Ti and Al-O-Ti bonds on their interfaces. The hiding power and whiteness of CK/TCPM are 17.12 g/m^2 and 95.7%, respectively, presenting its similarity to TiO2 in pigment properties.

Effects of Different Farming Methods and Their Effects on Soil Physicochemical Properties of Guilin Maojian Tea Gardens

In order to further optimize the cultivation and agronomic technology of Guilin Maojian tea gardens, the effects, efficiencies and costs of different farming methods and their effects on the physiochemical properties of tea garden soil were studied through the modification of the test sites with the non-farming land as the control. The results showed that human farming, mini-tiller farming and crawler tractor farming could improve the physical and chemical properties of soil. After farming, the soil had good water retention but low moisture content compared to the control group, while the soil bulk density and hardness value were significantly lower than those of the control, and the porosity of soil was significantly higher than that of contrast. With the passage of time, soil bulk density and hardness value gradually increased after farming, while the porosity of soil decreased gradually. There were great differences in the effects, efficiencies and costs of different farming methods. Crawler tractor had the best and most stable farming effect, and the operation efficiency was 10 times that of human farming while the cost was only 0.39 times of human farming. Therefore, it was feasible to adopt mini-tiller or crawler tractor to carry out mechanical farming of Guilin Maojian tea garden, which provided theoretical references for the soil property improvement using mechanical farming and was favorable for promoting the popularization of farming machines and the acceleration of mechanization of tea gardens. But for tea plantations that are intended to be mechanized, apart from the mechanical and technical personnel to be configured in place, the site conditions, planting modes and mechanical way reservation of tea garden should be planned accordingly. It is recommended to select flat or gentle slope for reclamation, and preference is given to non-sexual tea tree varieties with big line spacing over 180 cm long. Moreover, the main road construction should be more than 3.0 m, and trunk road 2.0 m or above. And isolation ditch and drain should be set between the tea garden and the surrounding mountain forests and farmland.

Preparation of tetragonal CaO-ZrO_2 nano-powder by chemical coprecipitation method

With zirconium oxychloride, nitrate of lime and ammonia as raw materials, nano powder of CaO ZrO 2 was prepared by chemical coprecipitation method. By use of azeotropic distillation processing, chemical coprecipitation precursor was obtained. Phase transformation of the precursor was observed at the temperature of 593.81 ℃ and 1 234.56 ℃ respectively with DTA analyses. Phase structure was analyzed through XRD and Raman spectra. The average particle size of tetragonal zirconium oxide powder was 9.8 and 43.7 nm after calcination at 600 and 1 100 ℃ respectively which was tested by TEM and BET analyses. Furthermore, the influences of the doping of nitrate of lime and the average particle size of zirconium oxide on the stability of tetragonal zirconium oxide were also discussed.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of Magnesium Oxide Content by CyDTA Volumetric Method

This standard specifies the method summary, reagents, apparatus, sampling, procedure, test results calculation and permissible tolerance of the determination of magnesium oxide by CyDTA volumetric method.

Chemical Analysis of Magnesia and Magnesia-Alumina Refractory Materials——Flame atomic absorption spectrometric method for determination of calcium oxide content

1 Scope This standard specifics the determination of calcium oxide coutent by flame atomic absorption spectrometric method.

Advances in the Research of Chemical Constituents in Thalictrum Plants

Thalictrum plants are perennial herbs in the family Ranuneulaceae, many of which are of important medicinal values. Alkaloids are major active constituents in Thalictrum plants in addition to a small amount of triterpene and flavonoids. The major pharmacological functions of the active constituents include： anti-tumor, anti- virus, antibiosis, antiphlogosis, hypotensive action, and etc. This paper summarizes the methods for determining the contents of chemical constituents in Thalictrum plants and new chemical constituents discovered in this genus in recent ten years.

Effects of Two Curing Methods on Quality of Yellow Sun-cured Tobacco

[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.

A Comparison Analysis of Chemical Composition of Aerosols in the Dust and Non-Dust Periods in Beijing

Dust events occurred frequently in Beijing in recent years. In this work, 120 aerosol samples were collected in two typical dust events (21-22 March and 15 May) and a non-dust period in Beijing from March to May 2001. Samples were analyzed for major elemental components by the Proton Induced X-ray Emission (PIXE) method. Results show that the enrichment factors of crustal elements such as Mg, Al, and Ti had little differences between the dust period and the non-dust period in Beijing, while the enrichment factors of other elements that have a relation to anthropogenic emissions were very low during the dust period. The results derived by using multivariate factor analysis from the observation data show that the sources such as soil dust, industry, and fuel combustion were among the major contributors to the particles in Beijing.

Synthesis and Characterization of Y-Doped Mesoporous CeO_2 Using A Chemical Precipitation Method

Using cetyltrimethylammonium bromide （CTAB） as the template agent, cerium nitrate as the cerium resource, yttrium nitrate as the yttrium resource, and ammonium carbonate as the precipitating agent, mesoporous CeO2 powders doped with different yttrium contents were successfully synthesized using a chemical precipitation method, under an alkalescent condition. Properties of the obtained samples were characterized and analyzed with X-ray diffraction （XRD）, energy dispersive analysis of X-rays （EDAX）, transmission electron microscopy （TEM）, infrared （IR） absorbance, and the BET method. For the prepared samples with 20% （molar ratio） Y-doped content, a BET specific surface area of 106. 6 m^2 · g^- 1, with an average pore size of3~27 nm were obtained. XRD patterns showed that the doped samples were with a cubic fluorite structure. TEM micrographs revealed that the doped samples showed a spherical morphology with a diameter ranging from 20 to 30 nm and a round pore shape. IR results indicated that the Ce-O-Ce vibration intensity decreased as the Y-doped content increased. N2 adsorption-desorption isotherms showed that the samples possessed typical mesopore characteristics. The average pore size of the samples decreased alter mesoporous CeO2 was doped with yttrium, and the average pore size decreased largely as the Y-doped content increased.

Thermodynamic analysis of combined reforming process using Gibbs energy minimization method: In view of solid carbon formation

Thermodynamic analysis was applied to study combined partial oxidation and carbon dioxide reforming of methane in view of carbon formation. The equilibrium calculations employing the Gibbs energy minimization were performed upon wide ranges of pressure （1-25 atm）, temperature （600-1300 K）, carbon dioxide to methane ratio （0-2） and oxygen to methane ratio （0-1）. The thermodynamic results were compared with the results obtained over a Ru supported catalyst. The results revealed that by increasing the reaction pressure methane conversion decreased. Also it was found that the atmospheric pressure is the preferable pressure for both dry reforming and partial oxidation of methane and increasing the temperature caused increases in both activity of carbon and conversion of methane. The results clearly showed that the addition of O2 to the feed mixture could lead to a reduction of carbon deposition.