期刊文献+
共找到343篇文章
< 1 2 18 >
每页显示 20 50 100
Extended Group Foliation Method and Functional Separation of Variables to Nonlinear Wave Equations 被引量:9
1
作者 QU Chang-Zheng ZHANG Shun-Li 《Communications in Theoretical Physics》 SCIE CAS CSCD 2005年第4X期577-582,共6页
Generalized functional separation of variables to nonlinear evolution equations is studied in terms of the extended group foliation method, which is based on the Lie point symmetry method. The approach is applied to n... Generalized functional separation of variables to nonlinear evolution equations is studied in terms of the extended group foliation method, which is based on the Lie point symmetry method. The approach is applied to nonlinear wave equations with variable speed and external force. A complete classification for the wave equation which admits functional separable solutions is presented. Some known results can be recovered by this approach. 展开更多
关键词 symmetry group group foliation method nonlinear wave equation functional separation of variables
下载PDF
A SPECIAL METHOD OF FOURIER SERIES WHICH IS EQUAL TO THE METHOD OF SEPARATION OF VARIABLES ON BOUNDARY VALUE PROBLEM
2
作者 Yan Xianggan Wu Jike, Department of Mechanics, Peking Unirersity, Bejing 100871. China 《Acta Mechanica Solida Sinica》 SCIE EI 1997年第3期255-261,共7页
By the separation of singularity, a special Fourier series solution of the boundary value problem for plane is obtained, which can satisfy all boundary conditions and converges rapidly. II is proved that the solution ... By the separation of singularity, a special Fourier series solution of the boundary value problem for plane is obtained, which can satisfy all boundary conditions and converges rapidly. II is proved that the solution is equal to the result of separation of variables. As a result, the non-linear characteristic equations resulting from the method of separation of variables are transformed into polynomial equations that can provide a foundation for approximate computation and asymptotic analysis. 展开更多
关键词 separation of singularity series resolution method of separation of variables boundary value problem characteristic equation
下载PDF
On the feasibility of variable separation method based on Hamiltonian system for plane magnetoelectroelastic solids 被引量:5
3
作者 侯国林 阿拉坦仓 《Chinese Physics B》 SCIE EI CAS CSCD 2008年第8期2753-2758,共6页
The eigenvalue problem of an infinite-dimensional Hamiltonian operator appearing in the isotropic plane magnetoelectroelastic solids is studied. First, all the eigenvalues and their eigenfunctions in a rectangular dom... The eigenvalue problem of an infinite-dimensional Hamiltonian operator appearing in the isotropic plane magnetoelectroelastic solids is studied. First, all the eigenvalues and their eigenfunctions in a rectangular domain are solved directly. Then the completeness of the eigenfunction system is proved, which offers a theoretic guarantee of the feasibility of variable separation method based on a Hamiltonian system for isotropic plane magnetoelectroelastic solids. Finally, the general solution for the equation in the rectangular domain is obtained by using the symplectic Fourier expansion method. 展开更多
关键词 magnetoelectroelastic solid variable separation method COMPLETENESS general solution
下载PDF
Restrained Torsion of Thin-walled Box Beam with Honeycomb Core
4
作者 臧庆来 张行 吴国勋 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2005年第4期336-345,共10页
Restrained torsion of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are e... Restrained torsion of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are established and solved. The boundary conditions are satisfied rigorously and the solutions are expressed by means of eigen function expansions. The diagram of torque is formulated by trigonometric series and used to determine the coefficients in above expansions. The results of computation provide the chord-wise and span-wise distributions of normal and shear stress in the face plate along with shear stress in the honeycomb core. 展开更多
关键词 box beam HONEYCOMB restrained torsion method of variable separation eigen function expansion
下载PDF
Restrained Bending of Thin-Walled Box Beam with Honeycomb Core
5
作者 臧庆来 张行 吴国勋 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2005年第3期223-229,共7页
Restrained bending of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are e... Restrained bending of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are established and solved. The boundary conditions are satisfied rigorously and the solutions are expressed by means of eigen function expansions. The diagram of shearing force is formulated by trigonometric series and used to determine the coefficients in above expansions. The computational resuits give the chord and span wise distributions of nomal and shear stress in the cover plate and the honeycomb core. At the same time, the attenuation of additional stress from fixed end to free end along the length of beam is shown clearly. 展开更多
关键词 box beam HONEYCOMB restrained bending method of variable separation eigen function expansion
下载PDF
Some discussions about method for solving the variable separating nonlinear models
6
作者 阮航宇 《Chinese Physics B》 SCIE EI CAS CSCD 2010年第5期17-24,共8页
Through analysing the exact solution of some nonlinear models, the role of the variable separating method in solving nonlinear equations is discussed. We find that rich solution structures of some special fields of th... Through analysing the exact solution of some nonlinear models, the role of the variable separating method in solving nonlinear equations is discussed. We find that rich solution structures of some special fields of these equations come from the nonzero seed solution. However, these nonzero seed solutions is likely to result in the divergent phenomena for the other field component of the same equation. The convergence and the signification of all field components should be discussed when someone solves the nonlinear equation using the variable separating method. 展开更多
关键词 variable separating method nonzero seed solution nonlinear equation
下载PDF
Bending of simply supported incompressible saturated poroelastic beams with axial diffusion
7
作者 杨骁 刘鑫 《Journal of Shanghai University(English Edition)》 CAS 2008年第1期1-6,共6页
Based on the mathematical model of the bending of the incompressible saturated poroelastic beam with axial diffusion, the qUasi-static bendings of the simply supported poroelastic beam subjected to a suddenly applied ... Based on the mathematical model of the bending of the incompressible saturated poroelastic beam with axial diffusion, the qUasi-static bendings of the simply supported poroelastic beam subjected to a suddenly applied constant load were investigated, and the analytical solutions were obtained for different diffusion conditions of the pore fluid at the beam ends. The deflections, the bending moments of the solid skeleton and the equivalent couples of the pore pressures were presented in figures. It is also shown that the behavior of the saturated poroelastic beams depends closely on the diffusion conditions at the beam ends, especially for the equivalent couples of the pore pressures. It is found that the Mandel-Cryer effect also exists in the bending of the saturated poroelastic beams under specific diffusion conditions at the beam ends. 展开更多
关键词 theory of porous media saturated poroelastic beam quasi-static bending method of separation of variables
下载PDF
Numerical Solutions of Finite Well in Two Dimensions Using the Finite Difference Time Domain Method
8
作者 Huwaida K.Elgweri Amal Hamed Mohamed Mansor 《Journal of Physical Science and Application》 2022年第1期12-18,共7页
The higher excited states for two dimensional finite rectangular well potential are calculated numerically,by solving the Schrödinger equation using the finite difference time domain method.Although,this method i... The higher excited states for two dimensional finite rectangular well potential are calculated numerically,by solving the Schrödinger equation using the finite difference time domain method.Although,this method is suitable to calculate the ground state of the quantum systems,it has been improved to calculate the higher excited states directly.The improvement is based on modifying the iterative process involved in this method to include two procedures.The first is known as cooling steps and the second is known as a heating step.By determining the required length of the cooling iteration steps using suitable excitation energy estimate,and repeating these two procedures using suitable initial guess function for sufficient times.This modified iteration will lead automatically to the desired excited state.In the two dimensional finite rectangular well potential problem both of the suitable excitation energy and the suitable initial guess wave function are calculated analytically using the separation of variables technique. 展开更多
关键词 Finite difference time domain method diffusion equation separation of variables method finite well potential Schrödinger equation
下载PDF
隧道拱顶渗漏稳态渗流场的解析研究
9
作者 余俊 李东凯 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2024年第4期838-846,共9页
针对隧道运营中发生拱顶渗漏且无泥沙涌入的稳态渗流情况,结合保角变换法和分离变量法推导出隧道拱顶渗漏稳态渗流场的显式解析解.应用PLAXIS有限元软件建立数值模型,从渗流场分布、衬砌水压力两方面验证所得解的正确性,通过与现有解析... 针对隧道运营中发生拱顶渗漏且无泥沙涌入的稳态渗流情况,结合保角变换法和分离变量法推导出隧道拱顶渗漏稳态渗流场的显式解析解.应用PLAXIS有限元软件建立数值模型,从渗流场分布、衬砌水压力两方面验证所得解的正确性,通过与现有解析解、数值解、试验结果的渗流量对比来验证所得解的准确性.进行参数分析,探究隧道埋深、渗漏宽度对衬砌水压力和渗流量的影响规律.结果表明,衬砌水压力在以渗漏位置为中心±60°范围内明显降低;随着隧道埋深的增大,衬砌最大水压力减小,渗流量先减小后增大,且渗流量最小值对应的隧道埋深随着地表水头的增大而增大;随着渗漏宽度的增大,衬砌最大水压力减小,渗流量增大,当渗漏宽度大于0.05 m时,渗漏宽度变化对水压力和渗流量的影响较小;在渗漏宽度较小时进行渗漏控制的效果明显. 展开更多
关键词 隧道拱顶 渗漏水 保角变换 分离变量法 渗流场解析研究 水压 渗流量
下载PDF
基于变密度法考虑制造约束的摇架拓扑优化设计
10
作者 杨昆 陈红彬 陈龙淼 《火炮发射与控制学报》 北大核心 2024年第4期69-75,共7页
摇架是火炮的重要组成结构,摇架减重对火炮轻量化研究具有重要意义。以某122 mm口径火炮摇架为研究对象,以合理降低其质量为研究目的,利用有限元软件对其进行强度校核并结合变密度法拓扑优化理论进行了优化设计。优化时考虑可制造性对... 摇架是火炮的重要组成结构,摇架减重对火炮轻量化研究具有重要意义。以某122 mm口径火炮摇架为研究对象,以合理降低其质量为研究目的,利用有限元软件对其进行强度校核并结合变密度法拓扑优化理论进行了优化设计。优化时考虑可制造性对优化添加了拔模约束和对称约束等条件,使优化后结构更加合理,利于制造。优化后摇架结构质量减少了12.87%,材料利用率更高,对重构模型进行有限元校核,结果显示该优化结构仍旧可靠。结合增材制造技术对摇架拓扑优化结构进行对比实验,实验证明该拓扑优化对原有结构刚强度影响较小,具有一定合理性。 展开更多
关键词 摇架 变密度法 拓扑优化 拔模约束 增材制造
下载PDF
3-羟基色酮的不对称Michael加成反应
11
作者 黄敏 李文哲 +1 位作者 李敏 张晓梅 《合成化学》 CAS 2024年第9期769-778,786,共11页
3-羟基色酮骨架存在于大量天然产物中,其衍生物多具有重要的生理活性和潜在的药用价值,但目前对3-羟基色酮的不对称手性催化反应研究较少。为丰富3-羟基色酮的研究多样性,通过控制变量法对手性金鸡纳碱类催化剂、溶剂、温度、投料比、... 3-羟基色酮骨架存在于大量天然产物中,其衍生物多具有重要的生理活性和潜在的药用价值,但目前对3-羟基色酮的不对称手性催化反应研究较少。为丰富3-羟基色酮的研究多样性,通过控制变量法对手性金鸡纳碱类催化剂、溶剂、温度、投料比、底物浓度和催化剂用量进行筛选,确定了最佳的反应条件:以化合物1a和2a的反应为例,0.10 mmol的化合物1a与0.12 mmol的化合物2a在Cat*5(10%,物质的量分数)的催化下,在1.0 mL的甲基叔丁基醚(MTBE)中于0℃下反应24~48 h。对底物进行普适性研究,以中等至优异的收率(71%~99%)和较好的对映选择性(56%~89%)获得了2-芳基3-羟基色酮衍生物。将对映选择性最高的产物3al(89%)进行30倍放大反应,能够以99%的收率和76%的对映选择性获得目标产物。所有化合物的结构经1H NMR,13C NMR, HPLC以及HR-MS(ESI)确证。 展开更多
关键词 手性金鸡纳碱类 3-羟基色酮 (E)-(2-硝基乙烯基)苯 不对称Michale加成反应 控制变量法
下载PDF
Explicit Analytical Solutions of Radial Permeable Power Rate Flow
12
作者 LI Yuanyuan CAI Ruixian 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2011年第2期220-223,共4页
The research of different kinds of permeable non-Newtonian fluid flow is increasing day by day owing to the development of science,technology and production modes.It is most common to use power rate equation to descri... The research of different kinds of permeable non-Newtonian fluid flow is increasing day by day owing to the development of science,technology and production modes.It is most common to use power rate equation to describe such flows.However,this equation is nonlinear and very difficult to derive explicit exact analytical solutions.Generally,people can only derive approximate solutions with numerical methods.Recently,an advanced separating variables method which can derive exact analytical solutions easier is developed by Academician CAI Ruixian(the method of separating variables with addition).It is assumed that the unknown variable may be indicated as the sum of one-dimensional functions rather than the product in the common method of separating variables.Such method is used to solve the radial permeable power rate flow unsteady nonlinear equations on account of making the process simple.Four concise(no special functions and infinite series) exact analytical solutions is derived with the new method about this flow to develop the theory of non-Newtonian permeable fluid,which are exponential solution,two-dimensional function with time and radius,logarithmic solution,and double logarithmic solution,respectively.In addition,the method of separating variables with addition is developed and applied instead of the conventional multiplication one.It is proven to be promising and encouraging by the deducing.The solutions yielded will be valuable to the theory of the permeable power rate flow and can be used as standard solutions to check numerical methods and their differencing schemes,grid generation ways,etc.They also can be used to verify the accuracy,convergency and stability of the numerical solutions and to develop the numerical computational approaches. 展开更多
关键词 non-Newtonian fluid analytical solution permeable power rate flow method of separating variables with addition
下载PDF
基于分离变量算法的静压止推气体轴承节流孔特性研究
13
作者 张建波 陈策 +4 位作者 邓志芳 张坤 金海良 曹逸韬 苏志敏 《振动与冲击》 EI CSCD 北大核心 2024年第3期58-68,85,共12页
首先基于分离变量算法(method of separation of variables, MSV)求解了单节流孔静压气体轴承的层流边界层方程,研究了节流孔附近流场特性,阐明了节流孔出口附近压降现象是由于惯性效应导致,并研究了轴承几何参数和供气参数对压降现象... 首先基于分离变量算法(method of separation of variables, MSV)求解了单节流孔静压气体轴承的层流边界层方程,研究了节流孔附近流场特性,阐明了节流孔出口附近压降现象是由于惯性效应导致,并研究了轴承几何参数和供气参数对压降现象的影响规律。最终提出了压降现象产生的临界条件为压比为0.940 9,也即压比大于临界压比时,压降现象消失。其次基于质量流量相等原则,结合层流边界层的MSV方法及雷诺方程的解析算法,提出了一种计算节流孔系数的新方法,并研究了轴承的几何参数及供气参数对节流孔系数的影响规律。结果显示,节流孔系数存在着参数敏感和不敏感区域,这是由于当压比小于等于0.6左右时,节流孔系数趋近于一个常数0.86左右。 展开更多
关键词 静压气体止推轴承 压降现象 节流孔系数 分离变量算法 雷诺方程
下载PDF
基于SIMP变密度法的结构拓扑优化及应用
14
作者 于海 杨慧斌 +1 位作者 茅健 闫娟 《工程塑料应用》 CAS CSCD 北大核心 2024年第10期91-99,共9页
在结构拓扑优化过程中,为了解决复杂结构计算速度慢、效率低的问题,提出了一种基于固体各向同性材料密度惩罚模型(SIMP)的步长自适应优化算法,该算法可根据SIMP惩罚因子P值自适应选择佳步长移动参数,并根据得到的目标函数的迭代值,自适... 在结构拓扑优化过程中,为了解决复杂结构计算速度慢、效率低的问题,提出了一种基于固体各向同性材料密度惩罚模型(SIMP)的步长自适应优化算法,该算法可根据SIMP惩罚因子P值自适应选择佳步长移动参数,并根据得到的目标函数的迭代值,自适应改变每次迭代的移动步长,在保证迭代精度的同时,以更快的速度逼近迭代目标,并利用经典MBB简支梁算例进行仿真实验,通过划分不同网格数量,横向对比分析另外三种步长迭代公式,得出最终迭代结果准确且迭代速度最快可提高100%的结论。此外,为满足汽车领域的轻量化需求,用拓扑优化技术,针对汽车油门支架结构进行重新优化设计,使优化后的模型体积减小35%;在此基础上,利用增材制造技术,采用双喷头连续纤维打印机,以长碳纤维体积分数为35%的复合材料(基体为短切碳纤维填充尼龙丝材)替代传统的铝合金材料进行增材制造,实现减重的目的,最终得到力学性能与原结构相当、质量减轻48%的油门支架结构,可进一步实现汽车的轻量化制造。 展开更多
关键词 变密度法 自适应移动步长 拓扑优化 油门支架结构 增材制造
下载PDF
复杂边界条件浮环轴承油膜力模型研究
15
作者 张聪聪 周瑜哲 +2 位作者 付晓瑞 冯泽民 蔡长旺 《润滑与密封》 CAS CSCD 北大核心 2024年第10期92-101,共10页
为了增加浮环轴承润滑油的流通性,常在浮环上开设周向槽或轴向槽,然而油槽的存在使得油膜边界复杂化。针对短轴承模型难以处理复杂边界条件以及数值方法计算效率极低的问题,引入和发展了2种油膜力模型——数据库法和分离变量法,以处理... 为了增加浮环轴承润滑油的流通性,常在浮环上开设周向槽或轴向槽,然而油槽的存在使得油膜边界复杂化。针对短轴承模型难以处理复杂边界条件以及数值方法计算效率极低的问题,引入和发展了2种油膜力模型——数据库法和分离变量法,以处理浮环轴承复杂边界和计算效率问题。针对轴向槽轴瓦,基于数据库方法建立具有三维结构的非线性油膜力和摩擦力数据库;而针对周向槽轴瓦,基于分离变量法推导出非线性油膜力解析表达式。通过与有限差分法对比,验证了所发展的油膜力模型具有较高的计算精度和计算效率。 展开更多
关键词 浮环轴承 油膜力模型 分离变量法 流体力数据库法 复杂边界条件
下载PDF
数理方程中分离变量法的思路探究
16
作者 李文伟 《大学数学》 2024年第3期102-113,共12页
国内很多“数学物理方程”教材在讲述分离变量法时,解答的第一步设y(x,t)=X(x)T(t),让初学者产生疑问,为什么方程的解具有乘积形式?加法形式的解是否可以?这里给出一个比较浅显的解释,以期让初学者能够比较容易地理解.
关键词 数理方程 分离变量法 傅立叶方法
下载PDF
分离变量法求解椭球星体的重力势增量
17
作者 冉雪峰 谢祉锐 《物理通报》 CAS 2024年第2期77-78,82,共3页
尝试利用电动力学中常用的求电势的方法“分离变量法”求解椭球星体的重力势增量.
关键词 分离变量法 椭球星体 重力势增量
下载PDF
圆形或扇形薄板竖向小振动两个基本问题探讨
18
作者 方奕忠 沈韩 +3 位作者 崔新图 廖德驹 冯饶慧 王钢 《大学物理》 2024年第7期11-15,共5页
理论上对圆形或扇形薄板小挠度理论下的竖向小振动问题作了进一步的探讨,再次讨论了圆心处的自然边界条件的提法,纠正了相关文献上的一些不恰当说法,得到用分离变量法求解扇形薄板的小振动问题的过程中,求解结果与先求角向部分变量或先... 理论上对圆形或扇形薄板小挠度理论下的竖向小振动问题作了进一步的探讨,再次讨论了圆心处的自然边界条件的提法,纠正了相关文献上的一些不恰当说法,得到用分离变量法求解扇形薄板的小振动问题的过程中,求解结果与先求角向部分变量或先求径向部分变量的次序无关.经典的边界条件的提法与变分法没有矛盾.结论表明,到目前为止,传统的薄板理论在解决板的竖向小振动问题上都是正确的. 展开更多
关键词 圆形薄板 扇形薄板 竖向振动 边界条件 分离变量法
下载PDF
Wave Radiation and Diffraction by A Two-Dimensional Floating Body with An Opening Near A Side Wall 被引量:6
19
作者 张洪生 周华伟 《China Ocean Engineering》 SCIE EI CSCD 2013年第4期437-450,共14页
The radiation and diffraction problem of a two-dimensional rectangular body with an opening floating on a semi- infinite fluid domain of finite water depth is analysed based on the linearized velocity potential theory... The radiation and diffraction problem of a two-dimensional rectangular body with an opening floating on a semi- infinite fluid domain of finite water depth is analysed based on the linearized velocity potential theory through an analytical solution procedure. The expressions for potentials are obtained by the method of variation separation, in which the unknown coefficients are determined by the boundary condition and matching requirement on the interface. The effects of the position of the hole and the gap between the body and side wall on hydrodynamic characteristics are investigated. Some resonance is observed like piston motion in a moon pool and sloshing in a closed tank because of the existence of restricted fluid domains. 展开更多
关键词 wave radiation and diffraction floating body with an opening side wall variable separation method domain decomposition
下载PDF
Solving mKdV-sinh-Gordon equation by a modified variable separated ordinary differential equation method 被引量:4
20
作者 谢元喜 《Chinese Physics B》 SCIE EI CAS CSCD 2009年第12期5123-5132,共10页
By introducing a more general auxiliary ordinary differential equation (ODE), a modified variable separated ODE method is developed for solving the mKdV-sinh-Gordon equation. As a result, many explicit and exact sol... By introducing a more general auxiliary ordinary differential equation (ODE), a modified variable separated ODE method is developed for solving the mKdV-sinh-Gordon equation. As a result, many explicit and exact solutions including some new formal solutions are successfully picked up for the mKdV-sinh-Gordon equation by this approach. 展开更多
关键词 modified variable separated ODE method mKdV-sinh-Gordon equation explicit andexact solution
下载PDF
上一页 1 2 18 下一页 到第
使用帮助 返回顶部