This work presents the results of geotechnical tests carried out in the laboratory on specimens of Quaternary olivine basanites from the Cap-Vert peninsula of Dakar. The samples were taken following geotechnical inves...This work presents the results of geotechnical tests carried out in the laboratory on specimens of Quaternary olivine basanites from the Cap-Vert peninsula of Dakar. The samples were taken following geotechnical investigations in the Fann-PE, Mermoz-Ouakam, Yoff and Ngor areas respectively. The results obtained show a dry density between 20.45 and 29.30 kN/m<sup>3</sup> which corresponds to medium to high density basanites. The porosity varies between 0.33% and 4.20%. For microlitic basanites, the porosity remains low, on the other hand, for micrograined basanites;a slight increase in porosity is noticed. As for the methylene blue adsorption test value measured, it is between 0.25 and 1.10. The uniaxial compression strength (Rc) and Young’s modulus (E) vary respectively from 12.19 MPa to 41.748 MPa and from 1477.6 MPa to 7699.1 MPa. The low strength values are recorded in altered and vesicular basanites. Also, a correlation was made between uniaxial compression strength and porosity and showed a gradual decrease in strength with increasing porosity.展开更多
Sillimanite is a brittle mineral as a metamorphic mineral product which is generally derived from clay, along with an increase in pressure and high temperature (600°C - 900°C), and kaliophilite is also a bri...Sillimanite is a brittle mineral as a metamorphic mineral product which is generally derived from clay, along with an increase in pressure and high temperature (600°C - 900°C), and kaliophilite is also a brittle mineral as a potassium bearing in the sand-shale series, which contributes to the clay diagenesis process. In the development of shale hydrocarbon in the Brownshale formation in the Bengkalis Trough, Central Sumatra Basin, using the correlation of the XRD (bulk and clay oriented), TOC, Ro, and MBT analysis results from the drill cuttings of well BS-03, so that the fracable zone interval can be determined. From this correlation, it shows that the presence of sillimanite and kaliophilite minerals as minor minerals greatly affects the changes in shale character and hydrocarbon generation, where at depth intervals of 10,780 ft downward (sand series-shale) there is an interesting phenomenon, <i>i.e. </i> low MBT, low TOC, and high Ro, so it is believed that the depth interval of 10,780 ft downward is a fracable zone interval (brittle shale) which is a good candidate for hydraulic fracking planning, while the upper depth interval is a fracture barrier.展开更多
文摘This work presents the results of geotechnical tests carried out in the laboratory on specimens of Quaternary olivine basanites from the Cap-Vert peninsula of Dakar. The samples were taken following geotechnical investigations in the Fann-PE, Mermoz-Ouakam, Yoff and Ngor areas respectively. The results obtained show a dry density between 20.45 and 29.30 kN/m<sup>3</sup> which corresponds to medium to high density basanites. The porosity varies between 0.33% and 4.20%. For microlitic basanites, the porosity remains low, on the other hand, for micrograined basanites;a slight increase in porosity is noticed. As for the methylene blue adsorption test value measured, it is between 0.25 and 1.10. The uniaxial compression strength (Rc) and Young’s modulus (E) vary respectively from 12.19 MPa to 41.748 MPa and from 1477.6 MPa to 7699.1 MPa. The low strength values are recorded in altered and vesicular basanites. Also, a correlation was made between uniaxial compression strength and porosity and showed a gradual decrease in strength with increasing porosity.
文摘Sillimanite is a brittle mineral as a metamorphic mineral product which is generally derived from clay, along with an increase in pressure and high temperature (600°C - 900°C), and kaliophilite is also a brittle mineral as a potassium bearing in the sand-shale series, which contributes to the clay diagenesis process. In the development of shale hydrocarbon in the Brownshale formation in the Bengkalis Trough, Central Sumatra Basin, using the correlation of the XRD (bulk and clay oriented), TOC, Ro, and MBT analysis results from the drill cuttings of well BS-03, so that the fracable zone interval can be determined. From this correlation, it shows that the presence of sillimanite and kaliophilite minerals as minor minerals greatly affects the changes in shale character and hydrocarbon generation, where at depth intervals of 10,780 ft downward (sand series-shale) there is an interesting phenomenon, <i>i.e. </i> low MBT, low TOC, and high Ro, so it is believed that the depth interval of 10,780 ft downward is a fracable zone interval (brittle shale) which is a good candidate for hydraulic fracking planning, while the upper depth interval is a fracture barrier.
