Fabrication of Core-Shell Hydrogel Bead Based on Sodium Alginate and Chitosan for Methylene Blue Adsorption

A novel core-shell hydrogel bead was fabricated for effective removal of methylene blue dye from aqueous solutions.The core,made of sodium alginate-g-polyacrylamide and attapulgite nanofibers,was cross-linked by Calcium ions(Ca^(2+)).The shell,composed of a chitosan/activated carbon mixture,was then coated onto the core.Fourier transform infrared spectroscopy confirmed the grafting polymerization of acrylamide onto sodium alginate.Scanning electron microscopy images showed the core-shell structure.The core exhibited a high water uptake ratio,facilitating the diffusion of methylene blue into the core.During the diffusion process,the methylene blue was first adsorbed by the shell and then further adsorbed by the core.Adsorption tests showed that the coreshell structure had a larger adsorption capacity than the core alone.The shell effectively enhanced the adsorption capacity to methylene blue compared to the single core.Methylene blue was adsorbed by activated carbon and chitosan in the shell,and the residual methylene blue diffused into the core and was further adsorbed.

Understanding association between methylene blue dye and biosorbent: Palmyrah sprout casing in adsorption process in aqueous phase

Water pollution caused by industrial dyes has become a severe problem in the modern world. Biosorbents can be used in an eco-friendly manner to remove industrial dyes. In this study, five biosorbents were selected: palmyrah sprout casing (PSC), manioc peel, lime peel, king coconut husk, and coconut kernel. Batch adsorption experiments were conducted to identify the best biosorbent with the highest ability to adsorb methylene blue (MB) from wastewater. The detailed mechanisms of PSC used in the adsorptive removal of MB in aqueous phase were investigated. Of the five biosorbents, PSC exhibited the best removal performance with an adsorption capacity at equilibrium (qe) of 27.67 mg/g. The qe values of lime peel, king coconut husk, manioc peel, and coconut kernel were 24.25 mg/g, 15.29 mg/g, 10.84 mg/g, and 7.06 mg/g, respectively. To explain the mechanisms of MB adsorption with the selected biosorbents, the Fourier transform infrared (FTIR) spectrometry and X-ray diffraction (XRD) analyses were performed to characterize functional properties, and isotherm, kinetic, rate-limiting, and thermodynamic analyses were conducted. The FTIR analysis revealed that different biosorbents had different functional properties on their adsorptive surfaces. The FTIR and XRD results obtained before and after MB adsorption with PSC indicated that the surface functional groups of carbonyl and hydroxyl actively participated in the removal process. According to the isotherm analysis, monolayer adsorption was observed with the Langmuir model with a determination coefficient of 0.998. The duration to reach the maximum adsorption capacity for MB adsorption with PSC was 120 min, and the adsorption process was exothermic due to the negative enthalpy change (-9.950 kJ/mol). Moreover, the boundary layer thickness and intraparticle diffusion were the rate-limiting factors in the adsorption process. As a new biosorbent for MB adsorption, PSC could be used in activated carbon production to enhance the performance of dye removal.

Optimizing Methylene Blue Removal from Textile Effluents: Comparative Study of Adsorption Efficiency Using Raw and Activated Carbon Derived from Gmelina Wood Wastes

This research investigates the efficacy of activated Gmelina Wood Sawdust (GWS) as an adsorbent for the removal of methylene blue (MB) dye from aqueous solutions, in comparison with raw GWS. The study employs laboratory experiments to assess the percentage of dye removal across various temperature and pH conditions. The adsorption process is scrutinized under different parameters, encompassing contact time, initial dye concentration, adsorbent dosage, temperature, and pH. Results demonstrate that activated GWS surpasses its raw counterpart, showcasing superior MB dye removal percentages. Extended contact times increased initial dye concentrations, and higher adsorbent dosages contribute positively to removal efficiency, while temperature exhibits an inverse relationship with dye removal. Optimal adsorption occurs at a pH of 7.0, aligning with the adsorbent’s zero-point charge (pHzpc), underscoring the role of surface charge in the adsorption process. This study underscores the potential of activated GWS as an economical and promising adsorbent material for addressing pollutants. Furthermore, the utilization of activated carbon derived from abundant agricultural waste underscores an environmentally conscious approach to adsorption applications. The ability to tailor the size and properties of activated carbon particles opens avenues for optimizing adsorption capabilities, thereby presenting opportunities for enhanced water treatment solutions.

High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption:Optimization and mechanism study

In this study,an alternative precursor for production of activated carbon was introduced using dragon fruit(Hylocereus costaricensis)peel(DFP).Moreover,KOH was used as a chemical activator in the thermal carbonization process to convert DFP into activated carbon(DFPAC).In order to accomplish this research,several approaches were employed to examine the elemental composition,surface properties,amorphous and crystalline nature,essential active group,and surface morphology of the DFPAC.The BrunauerEmmettTeller test demonstrated a mesoporous structure of the DFPAC has a high surface area of 756.3 m2g 1.The cationic dye Methylene Blue(MB)was used as a probe to assess the efficiency of DFPAC towards the removal of MB dye from aqueous solution.The effects of adsorption input factors(e.g.DFPAC dose(A:0.040.12 g L 1),pH(B:310),and temperature(C:3050℃))were investigated and optimized using statistical analysis(i.e.BoxBehnken design(BBD)).The adsorption kinetic model can be best categorized as the pseudofirst order(PFO).Whereas,the adsorption isotherm model can be best described by Langmuir model,with maximum adsorption capacity of DFPAC for MB dye was 195.2 mg g 1 at 50℃.The adsorption mechanism of MB by DFPAC surface was attributed to the electrostatic interaction,pp interaction,and Hbonding.Finally,the results support the ability of DFP to be a promising precursor for production of highly porous activated carbon suitable for removal of cationic dyes(e.g.MB).

A comparative study of adsorption and regeneration with different agricultural wastes as adsorbents for the removal of methylene blue from aqueous solution

Removal of dye from the industrial wastewater is one of the most important subjects in water pollution regulation.Successive adsorption/desorption cycles of a basic dye, methylene blue, on the internal almond shell, sheep manure waste and sawdust were investigated using fixed bed column experiments in order to study the adsorption capacity to remove MB and adsorbent regeneration efficiency. The adsorption breakthrough curves were predicted by the Thomas model, Yoon Nelson model, and Wolborska model and modified dose–response model using non-linear regression analysis. The results showed that the modified dose–response model was more suitable for the description of breakthrough curves for three adsorbents only in the first cycle. Although sheep manure waste presents the highest adsorption capacity, it is hard to regenerate and needs more time regeneration. Conversely, the internal almond shell presents lower adsorption capacity, but they are more readily regenerated.

Preparation of porous silica from natural chlorite via selective acid leaching and its application in methylene blue adsorption

In this study,porous silica with high surface area was prepared through selective leaching of thermally activated chlorite in HCl solution.In the process,chlorite was activated by pre-calcining treatment,then activated components(MgO,Al_(2)O_(3),and Fe_(2)O_(3))were selectively leached by acid solution,resulting in the formation of nanopores in situ.The morphology,structure,surface area and pore-size distribution of the material were characterized by XRD,TG/DSC,^(27)Al MAS NMR,SEM,TEM and N2 adsorption−desorption isotherms.The highest specific surface area(SBET=333 m^(2)/g)was obtained by selectively leaching the 600℃ calcined chlorite from 3 mol/L HCl at 90℃ for 2 h.The pore sizes and specific surface areas can be controlled by calcination and leaching conditions.The ^(27)Al MAS NMR spectra of the samples revealed the relationship between structural transformation and the selective acid leaching properties of thermal-activated chlorite,demonstrating that AlVI transfers into AlV when chlorite changes into activated chlorite during thermal activation,and the coordinations of Al has a significant effect on acid solubility of chlorite.The as-prepared porous silica showed favorable adsorption abilities with capacity of 148.79 mg/g for methylene blue at pH of about 7 and temperature of 25℃,indicating its promising potential in adsorption application.

Enhanced adsorption of Methylene Blue from aqueous solution by chitosan-g-poly(acrylic acid)/vermiculite hydrogel composites

A series of chitosan-g-poly （acrylic acid）/vermiculite hydrogel composites were synthesized and used as adsorbents for the investigation of the effect of process parameters such as vermiculite content, pH of dye solution, contact time, initial concentration of dye solution, temperature, ionic strength and concentration of surfactant sodium dodecyl sulfate on the removal of Methylene Blue （MB） from aqueous solution. The results showed that the adsorption capacity for dye increased with increasing pH, contact time and initial dye concentration, but decreased with increasing temperature, ionic strength and sodium dodecyl sulfate concentration in the present of the surfactant. The adsorption kinetics of MB onto the hydrogel composite followed pseudo second-order kinetics and the adsorption equilibrium data obeyed Langmuir isotherm. By introducing 10 wt.% vermiculite into chitosan-g-poly （acrylic acid） polymeric network, the obtaining hydrogel composite showed the highest adsorption capacity for MB, and then could be regarded as a potential adsorbent for cationic dye removal in a wastewater treatment process.

Kinetics and mechanism of the adsorption of methylene blue onto ACFs

The kinetics and mechanism of methylene blue (MB) adsorption onto activated carbon fibers (ACFs) have been studied. The effects of various experimental parameters, such as the initial MB concentration and the ACF mass, on the adsorption rate were investigated. Equilibrium data were fit well by a Freundlich isotherm equation. Adsorption measurements show that the process is very fast. The adsorption data were modeled using first- and second-order kinetic equations and intra–particle diffusion models. It was found that the first-order kinetic equation could best describe the adsorption kinetics. The adsorption process was found to be complex and controlled by both surface and pore diffusion with surface diffusion at the earlier stages, followed by pore diffusion at the later stages. The thermodynamic parameters △G0, △S0 and △H0, have been calculated. The thermodynamics of the MB-ACF system indicate that the adsorption process is spontaneous.

Equilibrium,Kinetics and Thermodynamics of the Adsorption of Methylene Blue onto a Metal-Organic Frameworks Material,Copper Coordination Polymer with Dithiooxamide

The equilibrium, kinetics and thermodynamics of the adsorption of methylene blue( MB) from aqueous solution onto copper coordination polymer with dithiooxamide( H2dtoaCu),one of the metal-organic frameworks( MOFs),were investigated in a batch adsorption system as a function of initial pH, adsorbent concentration, contact time, initial dye concentration, and temperature. The Langmuir, Freundlich, and DubininRadushkevich( D-R) isotherm models were used for modeling the adsorption equilibrium. It was found that Langmuir model yielded a much better fit than the Freundlich model under different temperatures. The maximum monolayer adsorption capacities of MB were 192. 98,229. 86,and 297. 38 mg /g at 298,308,and 318 K,respectively. The calculated mean adsorption energy( 8. 26-11. 04 kJ /mol) using D-R model indicated that the adsorption process might take place by chemical adsorption mechanism.Otherwise,the kinetic studies revealed that the adsorption process could be well explained by pseudo-second-order rate kinetics and intraparticle diffusion was not the rate-limiting step.Thermodynamic studies indicated that this system was feasible,spontaneous,and endothermic process. Based on these studies,H2dtoaCu can be considered as a potential adsorbent for the removal of MB from aqueous solution.

Synthesis and Characterization of Rectorite/ZnO/TiO2 Composites and Their Properties of Adsorption and Photocatalysis for the Removal of Methylene Blue Dye

As efficient water treatment agents, a novel series of rectorite-based ZnO and TiO2 hybrid composites（REC/ZnO/TiO2） were synthesized and characterized in this study. Effects of experimental parameters including TiO2 mass ratio, solution p H and catalyst dosage on the removal of methyl blue（MB） were also conducted. The presence of a little mass ratio（2%-6%） of TiO2 highly promoted the photoactivity of REC/ZnO/TiO2 in removal of MB dye from aqueous solution, in which ZnO and REC played a role of photocatalyst and adsorbent. The promotion effects of TiO2 may result from the accelerated separation of electron-hole on ZnO. The observed kinetic constant for the degradation of MB over REC/ZnO and REC/ZnO/TiO2 were 0.015 and 0.038 min^（-1）, respectively. The degradation kinetics of MB dye, which followed the Langmuir–Hinshelwood model, had a reaction constant of 0.17 mg/（L min）. The decrease of removal ratio of MB after five repetitive experiments was small, indicating REC/ZnO/TiO2 has great potential as an effective and stable catalyst.

Preparation of Kenaf Biochar and Its Adsorption Properties for Methylene Blue

The toxic dyestuff's from printing and dyeing wastewater have caused serious damages to the ecological environ-ment,thus exploring effective methods to remove them having become a key topic.Here,a series of biochar sam-ples were synthesized form kenaf to adsorb methylene blue(MB),which was acted as the dye representative for the test of adsorption capacity due to the presence of abundant double bond and aroma tic heterocyclic ring.By tuning the raw materials and pyrolysis temperature,a super adsorption capacity about 164.21 mg·g^(-1) was obtained over the biochar that pyrolyzed at 700℃ with the kenaf fiber as raw material Through the physical adsorption,elemental analysis,FTIR spectra and NH_(3)-TPD,it was found the high surface area and pore volume of biochar played a key role in the adsorption of MB,and the acidic sites would also assist the adsorption process.Besides,the adsorption kinetic model was ftted and calculated,implying the MB physically adsorbed on the bio-char rapidly and then occurred chemical adsorption on the acidic sites.In addition,through KBC700 recycling experiments,it was found that kenaf biochar had a good binding force to MB,which effectively avoided secondary pollution.This work provides important insights for the adsorption mechanism of MB by biochar,also offers some guidance for the further synthesis of biochar from various biomass.

Research on the Adsorption of Methylene Blue with Rice Husk Ash Aided by Ion Beam Etching Technique

[Objective] The aim was to study the mechanism of the removal effect of methylene blue(MB) by rice husk ash(RHA).[Method] The effects of contact time and pH on the adsorption of MB by rice husk ash were investigated,and the mechanism was discussed.[Result] RHA exhibited a remarkable ability on the adsorption of MB.The process of adsorption reached the equilibrium after 30 min,at about pH 9.The adsorption effect was explored with the aid of ion beam etching technique,which displayed that there were two main adsorption manners.One was the electrostatic interactions,through which the negatively charged RHA could adsorb the positively charged MB,the other was the porous effect due to the huge specific surface area of the micro/nano-scale porous silica in RHA,and MB could be adsorbed and deposited into the pores.[Conclusion] RHA could be used in the treatment of textile wastewater.Ion beam technology might be used as an effective way to investigate the adsorption effect.

Solution Blowing of Palygorskite-Based Nanofibers for Methylene Blue Adsorption

Palygorskite(PG)adsorbent with superior adsorption property and ion-exchange ability is highly desired in the field of dye removal.However,it generates high amounts of precipitation due to the granular form,resulting in secondary pollution after adsorption.Herein,the novel high porosity PG-based nanofibers that are easy for operating and retrieving have been fabricated using effective solution blowing and subsequent calcination.The obtained highly efficient adsorption nanofibers exhibit large specific surface area about 170.50 m^(2)/g with average diameter from 243 nm to 365 nm.Based on the abovementioned nanofibrous structure and negatively charged PG,the solution blowing of PG-based nanofibers(SBPNs)showed high adsorption capacity for methylene blue(MB)(112.36 mg/g).In addition,the adsorption of SBPNs is well described by the Langmuir isotherm model.This work provides new SBPNs forming process for the fields of dye removal,which may achieve the production of PG adsorbents at the industrial level.

Methylene Blue Adsorption by Plasma Re-Activated Carbon

The effects of O2 plasma treatment on the adsorption capacity of activated carbon (AC) were investigated by varying the plasma treatment times. The surface properties of the AC were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Zeta potential. The carbon was then applied to remove methylene blue (MB). The adsorption kinetics and isotherm were also studied. Results showed that pseudo-second-order kinetics was the most suitable model for describing the adsorption of MB onto AC. Equilibrium data were well fitted to the Freundlich isotherm model. The highest adsorption capacity resulted from 4 minutes of O2 plasma treatment. The 4-minute plasma treated AC had the best adsorption capacity for MB at 0.467 mg/mg. This work shows that activation of AC by plasma can open the micropore and increase the effectiveness of chemical removal.

Optimization of Methylene Blue Pigment Adsorption with Biomass Waste Adsorbent in a Continuous Operating Column

The function of adsorption is widespread in industry.After the adsorption process the adsorbent can be discarded after one use.In practice,however,the economics of the process make it necessary to regenerate the adsorbent with the ultimate goal of reusing it.In industry,activated carbon is usually used as an adsorbent which can be regenerated either chemically or thermally.In the present work,a competitive cost adsorbent is used,the raw chickpea straw,which is a discarded biomass by-product.Methylene blue dye was used as the adsorbent.The experiments were performed on bed length columns 15,25,75 and 150 cm respectively.The experimental and theoretical points of the adsorption curves for each column length are presented respectively.The experimental diagrams confirm the validity of the Bohart and Adams equation for dilute solutions with low concentrations.Chickpea straw can be offered to the industry as an adsorbent for textile dyes due to its adsorption capacity and low cost.At the same time,from the aggregate diagrams of the dilute solutions listed above,we observe:For Fig.1 concerning the adsorbents we used we observe that the capacity KF has a higher value for the ground cork while the lower one for olive ash.Also,for Fig.2 regarding the adsorbent materials we used we observe n of the isothermal Freundlich has a maximum for olive ash,while a minimum has for two materials lentil straw and ground cork.The database is an important and organizational element of knowledge as its use causes positive economies of scale in the utilization of given scientific knowledge and information.The aim of the present work is to construct an electronic database that includes the existing literature regarding the adsorption conditions of various dyes by some adsorbents.

Valorization of Mango Peels as Low-Cost Biosorbent in Methylene Blue Adsorption:Kinetic and Equilibrium Study

Mango peels,which constitute a significant proportion of urban waste,have been modified with phosphoric acid for use as a biosorbent in the removal of methylene blue from wastewater.The characterization of the obtained biosorbent showed that cellulose is the primary constituent followed by lignin and hemicellulose.The high water content and the low value of ash content indicate that the studied biosorbent is a porous material containing a low proportion of inorganic,inert,amorphous and unusable part for biosorbent production.The zero charge point(pHpzc)assessment showed that the overall surface charge of the biosorbent is negative and therefore plays a key role in the adsorption process.The adsorption of methylene blue by mango peels biosorbent is a two-step process:a rapid first step in which over 90%methylene blue is removed in less than 10 min followed by a slowdown of the adsorption rate when approaching the adsorption equilibrium.Among pseudo-first,pseudo-second order and intraparticle diffusion kinetics models studies,pseudo-second order was the best applicable to describe methylene blue adsorption,suggesting a two-step mechanism:the transfer of methylene blue molecules from the solution to the mango peels biosorbent surface,followed by the interaction between adsorbates and surface.The equilibrium adsorption data were analyzed by Langmuir,Freundlich and Temkin isotherms models.Among them,Langmuir was the best model to describe adsorption,indicating the existence of homogeneous distribution of adsorption sites on mango peels biosorbent surface and a mono-layer adsorption of methylene blue molecules.The low value of Temkin’s constant B relative to the interaction energy between methylene blue molecules and the surface of the biosorbent shows that the adsorption involved is a physisorption process.

Preparation of Hierarchically Interconnected Porous Banana Peel Activated Carbon for Methylene Blue Adsorption

Hierarchically interconnected porous activated carbon have high specific surface areas, large numbers of dye adsorption sites, and interconnected pores for dye molecule diffusion and transportation. We prepared hierarchically interconnected porous banana peel activated carbons(BPACs) via a green method involving hydrothermal pretreatment and KOH activation, and systematically tested its methylene blue(MB) adsorption capacity. SEM showed that the BPACs had an interconnected porous structure and high-porosity surface. The Brunauer-Emmett-Teller surface area was 601.21 m^2/g, the adsorption average pore diameter was 2.11 nm, and the total pore volume was 0.32 cm^3/g. The MB adsorption capacity increased with increasing temperature, initial MB concentration, and pH value; it decreased with increasing adsorbent dosage. The adsorption isotherms and kinetic results for MB adsorption on BPACs were best described by the Langmuir adsorption and pseudo-second-order kinetic models, respectively. BPACs have a well-developed hierarchically interconnected porous structure, which increase the MB adsorption capacity and removal efficiency. Systematic MB adsorption tests show that BPAC is a highly efficient and easily available adsorbent.

Equilibrium Isotherms and Kinetic Studies of Removal of Methylene Blue Dye by Adsorption onto Miswak Leaves as a Natural Adsorbent

In this research miswak leaves, agriculture wastes, available in large quantity in Saudi Arabia, was used as low-cost adsorbent for removing methylene blue (MB) dye. Equilibrium behavior of miswak leaves was investigated by performing batch adsorption experiments. The effects of [MB] 0, pH, contact time and adsorbent dose were evaluated. An alkaline pH (10.6) was favorable to the adsorption of MB dye. Adsorption isotherm models, Langmuir, Freundlich and Temkin were used to simulate the equilibrium data. Langmuir equation was found to have the highest value of R2 compared with other models. Furthermore, it was found that miswak leaves have a high adsorptive capacity towards MB dye (200 mg/g) and show favorable adsorption of MB dye with separation factor (RL < 1). In addition, pseudo-first- order, pseudo-second order and intra-particle diffusion were used to study the kinetics of MB adsorption onto miswak leaves. Adsorption process undergoes pseudo-second order kinetic as proved by the high value of R2 and the low value of sum of squared error (SSE percentage). Results indicated that intra-particle diffusion is not the limiting step, and the adsorption process is spontaneous as indicated by the negative value of the .

Kinetics and Thermodynamics of Adsorption Methylene Blue onto Tea Waste/CuFe₂O₄Composite

Tea waste/CuFe2O4 (TW/C) composite was prepared by co-precipitation method. The TW and TW/C samples are characterized by FTIR, XRD, SEM and N2 physical adsorption. The results showed that specific surface area of 350 and 570 m2·g?1 for TW and TW/C, respectively. The average pore size of TW/C is ca. 100 nm. Adsorption of methylen blue onto TW/C composite has been studied. Measurements are performed at various contact time, pH and adsorbent dosage. The adsorption kinetics of methylen blue (MB) could be described by the pseudo-second order kinetic model. The adsorption isotherms are described by means of Langmuir and Freundlich isotherms. It was found that the Freundlich model fit better than the Langmuir model. The thermodynamic constants of the adsorption were calculated to predict the nature of adsorption. The values of thermodynamic parameters indicate that a spontaneous and endothermic process was occurred.

Removal of Methylene Blue, Rhodamine B and Ammonium Ion from Aqueous Solution by Adsorption onto Sintering Porous Materials Prepared from Coconut Husk Waste

The present work was done in order to develop and find out suitable conversion methods for coconut husk wastes into value-added products. It is well-known that coconuts husk waste is hydrophobic therefore ethanol with different doses was used as a surfactant to enhance the removal efficiency. Treated samples at different adsorbent amounts, sintering temperatures & sintering time, stirring time, pH, and solution temperatures for color removal of Methylene Blue (MB) & Rhodamine B (RhB) and ammonium concentration were evaluated by using UV-Visible Spectroscopy. At 300°C, results showed complete removal for MB and more than 75% for RhB, whereas removal of ammonium ion reached around 52% when sintering product from husk waste was used. Further investigation was carried out for ammonium ion to understand the desorption kinetic behaviors and isotherm models. Kinetics indicated that desorption of ammonium ion followed pseudo-first order equation. Adsorption thermodynamic parameters such as ΔG, ΔH, and ΔS followed Van’t Hoff plot for adsorption and found to be negative which indicated that the adsorption process for ammonium onto coconut husk was physical, spontaneous and exothermic.