The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were ...The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were studied and three kinds of phenolic emulsifiers were prepared without catalyst in ethanol. The performance was researched that 2-（{2-[2-（2-Amino-ethylamino）-ethylamino]-ethyl-amino}-methyl）-4- nonyl-phenol （abbreviated as TETA） could be used in micro-surface. With addition of 0.5 % demulsifier, the mixing time was extended to 120 seconds obviously, and the cohesion torque （60 min） was 2.8 N＊m, which satisfied the opening traffic time shorter than 1 h. The wet track abrasion （6 d） was lower than 807 g/m2, with interracial modifier added, but the load wheel was increased with interfacial modifier increasing. When the TETA： demulsifier： interracial modifier =3：1：3, excellent performance was obtained and the experimental results met the International Slurry Surfacing Association （ISSA） standard. The synthesis process of this emulsifier is simple and the performance used in micro-surface was excellent, so this kind of emulsifier could have a better application future.展开更多
Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and effic...Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.展开更多
基金Funded by the National Key Basic Research and Development Plan(No.2012CB724601)the Jiangsu Provincial Natural Science Foundation(No.BK 2008503)
文摘The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were studied and three kinds of phenolic emulsifiers were prepared without catalyst in ethanol. The performance was researched that 2-（{2-[2-（2-Amino-ethylamino）-ethylamino]-ethyl-amino}-methyl）-4- nonyl-phenol （abbreviated as TETA） could be used in micro-surface. With addition of 0.5 % demulsifier, the mixing time was extended to 120 seconds obviously, and the cohesion torque （60 min） was 2.8 N＊m, which satisfied the opening traffic time shorter than 1 h. The wet track abrasion （6 d） was lower than 807 g/m2, with interracial modifier added, but the load wheel was increased with interfacial modifier increasing. When the TETA： demulsifier： interracial modifier =3：1：3, excellent performance was obtained and the experimental results met the International Slurry Surfacing Association （ISSA） standard. The synthesis process of this emulsifier is simple and the performance used in micro-surface was excellent, so this kind of emulsifier could have a better application future.
基金Supported by National Natural Science Foundation of China(Grant Nos.51305322,51405364,51475348)
文摘Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.
