Study on Characteristics of a High-Precision Cold Gas Micro Thruster

In order to improve the reliability of the spacecraft micro cold gas propulsion system and realize the precise control of the spacecraft attitude and orbit, a micro-thrust, high-precision cold gas thruster is carried out, at the same time due to the design requirements of the spacecraft, this micro-thrust should be continuous working more than 60 minutes, the traditional solenoid valve used for the thrusts can’t complete the mission, so a long-life micro latching valve is developed as the control valve for this micro thruster, because the micro latching valve can keep its position when it cuts off the outage. Firstly, the authors introduced the design scheme and idea of the thruster. Secondly, the performance of the latching valve and the flow characteristics of the nozzle were simulated. Finally, from the experimental results and compared with the numerical study, it shows that the long-life micro cold gas thruster developed in this paper meets the mission requirements.

经阴道超声结合MV-Flow成像技术在育龄期女性排卵期子宫内膜超声特点分析中的作用

目的探讨经阴道超声结合微血管血流(MV-Flow)成像技术在育龄期女性排卵期子宫内膜超声特点分析中的应用价值。方法选取2022年5-7月在解放军总医院第一医学中心超声诊断科行经阴道妇科超声检查的74例育龄期女性,年龄22~48(34.4±5.0)岁,其中≥35岁的高龄组女性35例,<35岁的低龄组女性39例。根据是否临床诊断为不孕分为不孕组(n=27)与健康对照组(n=47)。于患者排卵日利用经阴道超声测量子宫内膜的厚度、蠕动性评分及容积,子宫螺旋动脉的搏动指数(PI)和阻力指数(RI),双侧子宫动脉的PI和RI,三维能量多普勒血流参数[血流指数(FI)、血管化指数(VI)、血管化血流指数(VFI)]及内膜微血流血管化指数(VIMV)并进行组间比较。结果低龄组与高龄组的不孕病史差异无统计学意义(P=0.281)。低龄组子宫螺旋动脉RI低于高龄组(P<0.05),而内膜三维能量多普勒血流参数(VI、FI、VFI)及内膜VIMV均明显高于高龄组(P<0.05)。不孕组与健康对照组年龄分层差异无统计学意义(P=0.281)。不孕组子宫内膜的厚度、蠕动性评分、容积、三维能量多普勒血流参数(VI、FI、VFI)及VIMV均明显低于健康对照组(P<0.05)。结论经阴道超声检查可在一定程度上评估育龄期女性排卵期子宫内膜的特点,尤其VIMV可定量分析子宫内膜的微血流灌注情况。

微血管血流联合LumiFlow成像技术获取早中孕期胎儿心脏标准切面中的应用

目的探讨微血管血流(MV-Flow)联合LumiFlow成像技术在获取11~17^(+6)周胎儿心脏标准切面中的应用价值。资料与方法回顾性收集2022年7月-2023年8月在解放军总医院第一医学中心接受胎儿超声心动图检查的正常早中孕期孕妇63例,行胎儿超声心动图彩色多普勒血流显像(CDFI)及MV-Flow联合LumiFlow检查,分别获取国际妇产科超声学会推荐的8个诊断切面,对不同模式下各标准切面图的血流要素进行评分,比较CDFI及MV-Flow联合LumiFlow在各诊断切面的显示成功率及评分。结果63例孕妇共进行66次胎儿超声心动图检查,MV-Flow联合LumiFlow在上腹横切面、四腔心切面、主动脉弓切面显示成功率分别为98.48%、98.48%、96.97%,高于CDFI(χ^(2)=5.143、8.100、6.125,P<0.05),在三血管气管切面和左心室流出道切面显示成功率分别为39.40%和43.94%,显著低于CDFI(χ^(2)=13.885、7.579,P<0.05)。MV-Flow联合LumiFlow及CDFI两者在动脉导管弓切面、上下腔静脉长轴切面及所有切面总体评分差异无统计学意义(Z/t=-1.56、-1.77、-0.41,P>0.05);在上腹横切面、四腔心切面及主弓脉弓切面,MV-Flow联合LumiFlow评分显著高于传统CDFI(t=-5.14、-6.08、-6.63,P<0.001),左、右心室流出道切面及三血管气管切面CDFI评分显著高于MV-Flow联合LumiFlow(Z=-4.00、-2.93、-4.61,P<0.05)。结论MV-Flow联合LumiFlow在上腹横切面、四腔心切面与主弓脉弓切面的显示较CDFI更具优势,可以作为早期胎心筛查中血流显像技术的有效补充。

QDOT MICRO^(TM)导管两种模式与传统导管功率控制模式对消融损伤灶影响的对比研究

目的探讨QDOT MICRO^(TM)(QDOT)导管两种模式消融效果的安全性,以及与传统导管功率控制(PC)模式相比不同参数设置对消融创痕的影响。方法应用新鲜离体猪心,比较QDOT导管的温度/流速控制(TFC)模式与THERMOCOOL SMARTTOUCHTM SF(STSF)导管的PC模式在不同消融指数(AI,400、500)分组下的创痕大小和安全性。同时评估QDOT导管的超高功率短时程消融模式(vHPSD)和TFC模式在不同接触压力(5、15和30 g)和不同贴靠角度(0°、45°和90°)分组下的创痕大小和安全性,并对比两种模式在不同消融间距(4 mm和6 mm)分组下创痕的均匀性、连续性和安全性。结果在AI相同时,TFC与PC模式所产生的创痕的深度、表面宽度、最大横径以及体积的差异均无统计学意义(均为P>0.05)。与目标AI为400时TFC模式相比,vHPSD模式所产生创痕的表面宽度和最大横径的差异均无统计学意义(均为P>0.05),但vHPSD模式产生的创痕更浅[(1.95±0.38)mm比(2.72±0.31)mm,P<0.001]、体积更小[(30.35±11.34)mm^(3)比(48.78±19.82)mm^(3),P=0.040]。接触压力对创痕情况影响不显著,各参数差异均无统计学意义(均为P>0.05)。各组创痕表面宽度均在贴靠角度90°时最小,且在目标AI为500的TFC模式组不同贴靠角度导致的创痕表面宽度差异有统计学意义(P=0.027)。此外,消融间距为4 mm时,vHPSD模式和TFC模式均能产生均匀且连续的线状创痕;消融间距为6 mm时,vHPSD模式和目标AI为400的TFC模式组所产生的创痕均不连续,而目标AI为500的TFC模式组产生的创痕具有良好的连续性。应用QDOT导管和STSF导管消融均未产生气爆和焦痂。结论在AI相同时,QDOT导管的TFC模式与STSF导管的PC模式消融效果相似。与TFC模式相比,vHPSD模式产生的创痕深度更浅,体积更小。QDOT导管的TFC模式和vHPSD模式安全性均较高。

Flow control of micro-ramps on supersonic forward-facing step flow

The effects of the micro-ramps on supersonic turbulent flow over a forward-facing step（FFS） was experimentally investigated in a supersonic low-noise wind tunnel at Mach number 3 using nano-tracer planar laser scattering（NPLS）and particle image velocimetry（PIV） techniques. High spatiotemporal resolution images and velocity fields of supersonic flow over the testing model were captured. The fine structures and their spatial evolutionary characteristics without and with the micro-ramps were revealed and compared. The large-scale structures generated by the micro-ramps can survive the downstream FFS flowfield. The micro-ramps control on the flow separation and the separation shock unsteadiness was investigated by PIV results. With the micro-ramps, the reduction in the range of the reversal flow zone in streamwise direction is 50% and the turbulence intensity is also reduced. Moreover, the reduction in the average separated region and in separation shock unsteadiness are 47% and 26%, respectively. The results indicate that the micro-ramps are effective in reducing the flow separation and the separation shock unsteadiness.

A single-phase turbulent flow numerical simulation of a cyclonic-static micro bubble flotation column

Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubble flotation column. The simulation results visually show the interior flow and illustrate mix- ing of the different flows within the apparatus. An analysis of the distribution in velocity and vorticity was used to analyze the separation mechanism and the synergism of the component parts and to strengthen the design of each unit. The conclusions are that axial back mixing and vortexes still exist in the separation unit even in the presence of packing media. The inverted cone structure near the tangential inlet （cone 1 ） within the cyclonic unit is the main reason for this. The cone 1 structure enhances swirling and focuses energy within the inner area of the cone where there are abundant bubbles. As a result slowly floating minerals are forcibly recovered and railings are effectively separated within this unit. However, cone 1 also reduces the vorticity downstream from it, which reduces the efficiency of railings separation within this part. Therefore, the design of cone 1 should be based on the principles of lessening disturbances to the column unit while strengthening the separation effect of the cyclonic unit. Also, the axial distance between the paired cyclonic structures at the bottom of the column （cone 2） and cone 1 poses tough requirements because of an interaction between separation of the middlings and railings.

Flow Behaviour Analysis and Experimental Investigation for Emitter Micro-channels

The existing research of the flow behavior in emitter micro-channels mainly focuses on the single-phase flow behavior.And the recent micro-particle image velocimetry（PIV） experimental research on the flow characteristics in various micro-channels mainly focuses on the single-phase fluid flow.However,using an original-size emitter prototype to perform the experiments on the two-phase flow characteristics of the labyrinth channels is seldom reported.In this paper,the practical flow of water,mixed with sand escaped from filtering,in the labyrinth channel,is investigated.And some research work on the clogging mechanism of the labyrinth channel＇s structure is conducted.Computational fluid dynamics（CFD） analysis has been performed on liquid-solid two-phase flow in labyrinth-channel emitters.Based on flow visualization technology-micro-PIV,the flow in labyrinth channel has been photographed and recorded.The path line graph and velocity vector graph are obtained through the post-treatment of experimental results.The graphs agree well with CFD analysis results,so CFD analysis can be used in optimal design of labyrinth-channel emitters.And the optimized anti-clogging structures of the rectangular channel and zigzag channel have been designed here.The CFD numerical simulation and the micro-PIV experiments analysis on labyrinth-channel emitter,make the ＂black box＂ of the flow behavior in the emitter channel broken.Furthermore,the proposed research promotes an advanced method to evaluate the emitter＇s performance and can be used to conducting the optimal design of the labyrinth-channel emitters.

Electrokinetic flow in the U-shaped micro-nanochannels

U-shaped micro-nanochannels can generate significant flow disturbance as well as locally amplified electric field, which gives itself potential to be microfluidic mixers, electrokinetic pumps,and even cell lysis process. Numerical simulation is utilized in this work to study the hidden characteristics of the U-shaped micro-nanochannel system, and the effects of key controlling parameters(the external voltage and pressure) on the device output metrics(current, maximum values of electric field, shear stress and flow velocity) were evaluated. A large portion of current flowing through the whole system goes through the nanochannels, rather than the middle part of the microchannel, with its value increasing linearly with the increase of voltage. Due to the local ion depletion near micro-nanofluidic junction, significantly enhanced electric field(as much as 15 fold at V=1 V and P_0=0) as well as strong shear stress(leading to electrokinetic flow) is generated.With increasing external pressure, both electric field and shear stress can be increased initially(due to shortening of depletion region length), but are suppressed eventually at higher pressure due to the destruction of ion depletion layer. Insights gained from this study could be useful for designing nonlinear electrokinetic pumps and other systems.

Velocity distribution of the flow field in the cyclonic zone of cyclone-static micro-bubble flotation column

Laboratory experiments have been conducted to study the flow field in a cyclone static micro-bubble flotation column. The method of Particle Image Velocimetry (PIV) was used. The flow field velocity distribution in both cross section and longitudinal section within cyclonic zone was studied for different circulating volumes. The cross sectional vortex was also analyzed. The results show that in cross section as the circulating volume increases from 0.187 to 0.350 m 3 /h, the flow velocity ranges from 0 to 0.68 m/s. The flow field is mainly a non-vortex potential flow that forms a free vortex without outside energy input. In the cyclonic region the vortex deviates from the center of the flotation column because a single tangential opening introduces circulating fluid into the column. The tangential component of the velocity plays a defining role in the cross section. In the longitudinal section the velocity ranges from 0 to 0.08 m/s. The flow velocity increases as does the circulating volume. Advantageous mineral separation conditions arise from the combined effects of cyclonic flow in cross and longitudinal section.

Precision Synthesis of a Long-Chain Silane Coupling Agent Using Micro Flow Reactors and Its Application in Dentistry

In dentistry, a wide range of materials is available for restorative treatment;a typical product of such restorative materials mainly consists of radically polymerizable monomer(s) and inorganic filler(s) (for added physical strength), as well as a surface modifier (e.g. silane coupling agent) for improved affinity between monomer and filler. It is favorable to use an optimal surface modifier depending on the respective restorative materials. However, commercially available surface modifiers, which are synthesized by the ton, are not always suited for what is required for properties of the many different dental restorative materials. As a potential solution to such a problem, we focused on the latest technology, “micro flow reactors” that enabled an on-demand low-volume synthesis of many types of surface modifiers. Using micro reaction fields of such flow reactors, we synthesized a novel long-chain silane coupling agent. Compared to the control system synthesized using a conventional reaction flask, the novel system enabled significant reduction in reaction time without inducing any major side reactions. A dental composite resin that was treated with the novel coupling agent exhibited higher toughness, suggesting that such a silane coupling agent was an effective surface modifier.

基于“源-流-汇”理论的城区小微水体保护规划方法研究

小微水体是城市雨洪调蓄的重要空间。以提高城市雨洪韧性为目标,以小微水体为对象,基于“源-流-汇”理论提出了现状雨洪条件分析、“源-流-汇”空间识别与评价、小微水体保护建设引导的规划思路,从空间维度提出了小微水体的保护路径,避免了总量管控方法下的空间错配,并以安徽省蚌埠市中心城区为例进行了实例研究。以期为国土空间规划编制背景下小微水体布局和保护提供技术支撑,为城市水系保护提供参考。

Numerical simulation of blood flow and interstitial fluid pressure in solid tumor microcirculation based on tumor-induced angiogenesis

A coupled intravascular-transvascular-interstitial fluid flow model is developed to study the distributions of blood flow and interstitial fluid pressure in solid tumor microcirculation based on a tumor-induced microvascular network. This is generated from a 2D nine-point discrete mathematical model of tumor angiogenesis and contains two parent vessels. Blood flow through the microvascular network and interstitial fluid flow in tumor tissues are performed by the extended Poiseuille＇s law and Darcy＇s law, respectively, transvascular flow is described by Starling＇s law; effects of the vascular permeability and the interstitial hydraulic conductivity are also considered. The simulation results predict the heterogeneous blood supply, interstitial hypertension and low convection on the inside of the tumor, which are consistent with physiological observed facts. These results may provide beneficial information for anti-angiogenesis treatment of tumor and further clinical research.

A 2-Dimensional Micro Flow Sensor with Wide Range Flow Sensing Properties

A new silicon micro flow sensor with multiple temperature sensing elements was proposed and numerically simulated in considering wide range flow measuring properties.The micro flow sensor has three pairs of temperature sensing elements with a central heater compared with typical sensor which has only a temperature sensing element on each side of a central heater.A numerical analysis of the micro flow sensor by Finite Difference Formulation for Heat Transfer Equation was performed.The nearest pair of temperature sensor showed very good linear sensitivity between 0 to 0.4m/s flow and saturated from 0.75m/s flow.However the furthest pair of temperature sensor showed some flow sensitivity even though the flow rate of 2.0m/s.Thus,this suggested new micro flow meter with multiple temperature sensing elements could be used as a thermal mass flow sensor which has accuracy sensitivity for very wide flow range.

Capillary Micro-Flow Through a Fiber Bundle(Ⅰ)

The present work considered the capillary micro-flow through a fiber bundle.The resin heights in the fiber bundle as a function of time were used to determine the experimental values of capillary pressure and the permeability by the nonlinear regression fitting method.The fitting curves showed a good agreement with experiments.However,these values of capillary pressure from short-time experiments were much lower than the theoretical results from the Yang-Laplace Equation.More accurate capillary pressure was predicted from the presented long-run experiment.

Capillary Micro-flow Through a Fiber Bundle(Part 2)

A numerical model was proposed to simulate the capillary micro-flow through a fiber bundle. The capillary pressure was predicted by the Young-Laplace equation and the corresponding optimal values of permeability were found by a trial-and-error method. The empirical Kozeny constants which are dependent on fiber volume fraction were recormnended for the prediction of permeability.

Flow characteristics of supersonic gas passing through a circular micro-channel under different inflow conditions

Gas flow in a micro-channel usually has a high Knudsen number. The predominant predictive tool for such a microflow is the direct simulation Monte Carlo(DSMC) method, which is used in this paper to investigate primary flow properties of supersonic gas in a circular micro-channel for different inflow conditions, such as free stream at different altitudes, with different incoming Mach numbers, and with different angles of attack. Simulation results indicate that the altitude and free stream incoming Mach number have a significant effect on the whole micro-channel flow field, whereas the angle of attack mainly affects the entrance part of micro-channel flow field. The fundamental mechanism behind the simulation results is also presented. With the increase of altitude, thr free stream would be partly prevented from entering into micro-channel.Meanwhile, the gas flow in micro-channel is decelerated, and the increase in the angle of attack also decelerates the gas flow. In contrast, gas flow in micro-channel is accelerated as free stream incoming Mach number increases. A noteworthy finding is that the rarefaction effects can become very dominant when the free stream incoming Mach number is low. In other words, a free stream with a larger incoming velocity is able to reduce the influence of the rarefaction effects on gas flow in the micro-channel.

CFD-PBM框架下旋流式微泡发生器气泡动力学行为

为探究旋流式微泡发生器气泡直径变化规律以及气泡动力学行为,采用欧拉-欧拉非均质气液二相模型求解流动参数,并耦合PBM(群体平衡模型)求解直径在1—1000μm内的14个直径气泡数密度变化,利用Luo破碎-Liao合并组合模型对旋流式微泡发生器内部的气泡破碎合并行为进行分析。模拟计算结果与实验相近,说明CFD-PBM可以用来求解旋流式微泡发生器内部的气泡直径变化。由此可知,模拟条件下,气泡破碎频率对于液体流速变化更加敏感,气泡合并频率对于当地含气率变化更为敏感;气相主要分布在旋流式微泡发生器的中轴线附近处,并且沿着中轴线可见细长分布类似龙卷风形状的大气泡区;液体流量增加及出口直径的减小均会促进出口气泡直径的减小;气泡直径对于入口气体流量的变化并不敏感,并且这种影响关系还受到出口直径的影响。

Flowing simulation of injection molded parts with micro-channel

In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included in the injection molding the macro-component with a micro-channel. In this case, a simplified model is used to analyze the flow behaviors of the macro-sized part within a micro-channel. The flow behaviors in the macro-cavity are estimated by using the finite element and finite difference methods. The influence of the injection rate, micro-channel size, heat transfer coefficient, and mold temperature on the flowing distance is investigated based on the non-isothermal analytic method. The results show that an increase in the radius of the micro-channel and mold temperature can improve effectively the flowing distance in the micro-channel.

Limitations of Lattice Boltzmann Modeling of Micro-Flows in Complex Nanopores

The multiscale transport mechanism of methane in unconventional reservoirs is dominated by slip and transition flows resulting from the ultra-low permeability of micro/nano-scale pores,which requires consideration of the microscale and rarefaction effects.Traditional continuum-based computational fluid dynamics(CFD)becomes problematic when modeling micro-gaseous flow in these multiscale pore networks because of its disadvantages in the treatment of cases with a complicated boundary.As an alternative,the lattice Boltzmann method(LBM),a special discrete form of the Boltzmann equation,has been widely applied to model the multi-scale and multi-mechanism flows in unconventional reservoirs,considering its mesoscopic nature and advantages in simulating gas flows in complex porous media.Consequently,numerous LBM models and slip boundary schemes have been proposed and reported in the literature.This study investigates the predominately reported LBM models and kinetic boundary schemes.The results of these LBM models systematically compare to existing experimental results,analytical solutions of Navier-Stokes,solutions of the Boltzmann equation,direct simulation of Monte Carlo(DSMC)and information-preservation DSMC(IP_DSMC)results,as well as the numerical results of the linearized Boltzmann equation by the discrete velocity method(DVM).The results point out the challenges and limitations of existing multiple-relaxation-times LBM models in predicting micro-gaseous flow in unconventional reservoirs.

Research on Micro-Flow Self-Sensing Actuators Based on Piezoelectric Ceramic Stack `

The paper is concerned with the micro-flow self-sensing actuators,the work of which is based on the secondary piezoelectric effect. The piezoelectric ceramic stack can yield micro-displacement due to its first inverse piezoelectric effect. Therefore,we apply this micro-displacement to cell micro-flow injection. Moreover, due to the charge of the secondary direct piezoelectric effect,the piezoelectric ceramic stack is able to detect the force and displacement in the injection by itself. The experiments of first inverse piezoelectric effect and secondary direct piezoelectric effect are conducted. The experiment results show that,subjected to 0- 60 V input,the piezoelectric ceramic stack can generate 13. 45 μm displacement,and control accuracy can achieve 2 nm. It can completely meet the needs of cell micro-flow injection. Also,the experiments demonstrate that the micro-displacement due to the first inverse piezoelectric effect can be well self-sensed by the electric charge due to the secondary direct piezoelectric effect.