In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content...In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.展开更多
The research of superhydrophobic materials has attracted many researchers＇ attention due to its application value and prospects.In order to expand the serviceable range,people have investigated various superhydrophob...The research of superhydrophobic materials has attracted many researchers＇ attention due to its application value and prospects.In order to expand the serviceable range,people have investigated various superhydrophobic materials.The simple and easy preparation method has become the focus for superhydrophobic materials.In this paper,we present a program for preparing a rough surface on an aluminum foil,which possesses excellent hydrophobic properties after the treatment with low surface energy materials at high vacuum.The resulting contact angle is larger than 160° and the droplet cannot freeze on the surface above-10 ℃.Meanwhile,the modified aluminum foil with the thickness of less than 100 μm can be used as an ideal flexible applied material for superhydrophobicity/anti-icing.展开更多
Aluminum films with thickness of 8.78-20.82μm were deposited on the AZ31B magnesium alloys by DC magnetron sputtering.The influences of aluminum film on the micro-mechanical properties and corrosion behavior of the m...Aluminum films with thickness of 8.78-20.82μm were deposited on the AZ31B magnesium alloys by DC magnetron sputtering.The influences of aluminum film on the micro-mechanical properties and corrosion behavior of the magnesium alloys were investigated.The morphology of aluminum film was examined by scanning electron microscopy and the microstructure of aluminum film was analyzed by X-ray diffiactometry.Nanoindentation and nanoscratch tests were conducted to investigate their micromechanical properties.Moreover,potentiodynamical polarization test performed in 3.5%NaCl solution was carried out to study their anticorrosion performances.The results show that the surface hardness of AZ31B magnesium alloy with aluminum film is 1.38-2.01 GPa,higher than that of the magnesium alloy substrate.The critical load of Al film/AZ31B substrate is in the range of 0.68-2.77 N. The corrosion current density of AZ31B with aluminum film is 2-3 orders of magnitude less than that of bare AZ31B.And the corrosion potential with aluminum film positively shifts.Thus aluminum film can increase the corrosion resistance of Mg alloys obviously.展开更多
Surfaces with controllable micro structures are significant in fundamental development of superhydrophobicity. However,preparation of superhydrophobic surfaces with array structures on metal substrates is not effectiv...Surfaces with controllable micro structures are significant in fundamental development of superhydrophobicity. However,preparation of superhydrophobic surfaces with array structures on metal substrates is not effective using existing methods. A new method was presented to fabricate super-hydrophobic post arrays on aluminum(Al) substrates using mask electrochemical machining and fluoridation. Electrochemical etching was first applied on Al plates with pre-prepared photoresist arrays to make the post array structures. Surface modification was subsequently applied to reduce the surface energy, followed by interaction with water to realize superhydrophobicity. Simulation and experimental verification were conducted to investigate how machining parameters affect the array structures. Analysis of the water contact angle was implemented to explore the relationship between wettability and micro structures.The results indicate that superhydrophobic surfaces with controllable post structures can be fabricated through this proposed method, producing surfaces with high water static contact angles.展开更多
The ceramic coatings containing zirconium dioxide were grown in-situ on LY12 aluminium alloy by micro-arc oxidation in mixed zirconate and phosphate solution. The phase composition and morphology of the coatings were ...The ceramic coatings containing zirconium dioxide were grown in-situ on LY12 aluminium alloy by micro-arc oxidation in mixed zirconate and phosphate solution. The phase composition and morphology of the coatings were studied by XRD and SEM. The adhesive strength of ceramic coatings was assessed by thermal shock test and tensile test. The results show that the coating is composed of m-ZrO2,t-ZrO2, and a littleγ-Al2O3. Along the section of the coating, t-ZrO2 is more on both sides than that in the middle, while m-ZrO2 is more in the middle than that on both sides. Meantime the coating is also composed of a dense layer and a loose layer. The coating has excellent thermal shock resistance under 550℃and 600℃. And tensile tests show the adhesive strength of the dense layer of the coating with the substrate is more than 17.5 MPa.展开更多
Micro plasma oxidation(MPO) has recently been investigated as a novel, rapid and effective means to provide modified surfaces with improved properties of load bearing and wear resistance on light alloys particularly a...Micro plasma oxidation(MPO) has recently been investigated as a novel, rapid and effective means to provide modified surfaces with improved properties of load bearing and wear resistance on light alloys particularly aluminum alloys. MPO is a multifactor-controlled process, these factors must be controlled to produce high quality coatings. The main research emphasis in MPO coating development over the past years seems to be the attainment of higher hardness levels and thick coatings. The porosity of MPO coating is the most complex phenomenon affecting the distribution, levels and the measurements of the hardness; and it is controlled by suitable selection of important parameters such as the electrical conditions. Ceramics coatings were synthesized on Al substrate by MPO to examine the effects of adding a cathodic phase alternated with anodic-cathodic current on the porosity and hardness characteristics of coatings by X-ray diffraction(XRD), scanning electron microscopy(SEM), and microhardness tester. The coatings produced by the combined mode are more dense and less porous than that by the anodic-cathodic mode. (Microhardness) test shows that the coatings produced by the combined mode exhibit both the highest hardness, and less reduction percentage in hardness with increasing the coatings thickness. These improvements become more significant for the polished and thicker coatings.展开更多
The electrolyte temperature has a great influence on the performance of the coating prepared by micro-arc oxidation (MAO). The behavior of MAO discharge in the changing electrolyte temperature has been investigated. C...The electrolyte temperature has a great influence on the performance of the coating prepared by micro-arc oxidation (MAO). The behavior of MAO discharge in the changing electrolyte temperature has been investigated. Compared to constant electrolyte temperature in conventional MAO process, the process has different discharge characteristics under the changing electrolyte temperature. The amplitude of pulse voltage was detected to study the change of discharge characteristic under the constant-current control of MAO power supply. Three successive discharge stages were differentiated by the variable the pulse voltage versus process time. Since there were significant changes in the sound, the sound signals were acquired and the audio analysis was used to describe the changing of the MAO discharge at different stages. Optical emission spectroscopy (OES) was employed in situ to unveil how the micro-discharge changed with the temperature increasing. Scanning electron microscopy (SEM) was used to characterize the morphology of the coatings on 6N01 aluminum alloy prepared by normal process with the constant-temperature control of the MAO electrolyte and by the process under the changing electrolyte temperature. A mode of film growth and micro-discharge was given to describe the effects of the changing electrolyte temperature in the whole MAO process.展开更多
Microstructure evolution of wrought aluminum alloy extruded rods and the mechanism of liquid phase formation during reheating were investigated. And the relation between the volume fraction of liquid phase and the rec...Microstructure evolution of wrought aluminum alloy extruded rods and the mechanism of liquid phase formation during reheating were investigated. And the relation between the volume fraction of liquid phase and the recrystallization microstructure was proposed. The results show that increase in reheating temperature and time can augment the volume fraction of liquid phase and accelerate the grain spheroidization, as a result of which the requirement of semi-solid forming can be satisfied. Due to the higher aberration energy of grain boundary, the melting point is lowered as a result of the easy diffusion of atoms. At higher reheating temperature the grain boundary melts, the growth of the recrystallized grain is inhibited and the grain is refined. The composition of the low melt-point phase along the recrystallized grains was determined using EDS. It can be seen from the experimental results that when the extrusion rod of the wrought aluminum alloy is reheated at 610℃ for 20min, perfect fine equiaxial grains can be obtained, the average grain size is about 66.34μm and the volume fraction of solid phase is about 68%.展开更多
基金This work was financially supported bythe Doctoral Foundation ofYanshan University(B41)theScience and Technology Foundation ofYanshan University(YDJJ0169).
文摘In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.
基金Project supported by China Postdoctoral Science Foundation(Grant No.2016M590137)the National Natural Science Foundation of China(Grant No.21476246)+2 种基金the Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant No.2016047)the KIST Institutional Program(Grant No.2E26291)Research Grants of NRF funded by the National Research Foundation under the Ministry of Science,ICT & Future,Korea(Grant No.NRF-2015H1D3A1036078)
文摘The research of superhydrophobic materials has attracted many researchers＇ attention due to its application value and prospects.In order to expand the serviceable range,people have investigated various superhydrophobic materials.The simple and easy preparation method has become the focus for superhydrophobic materials.In this paper,we present a program for preparing a rough surface on an aluminum foil,which possesses excellent hydrophobic properties after the treatment with low surface energy materials at high vacuum.The resulting contact angle is larger than 160° and the droplet cannot freeze on the surface above-10 ℃.Meanwhile,the modified aluminum foil with the thickness of less than 100 μm can be used as an ideal flexible applied material for superhydrophobicity/anti-icing.
基金Project(2070950)supported by the Key Research Projects of the Ministry of Education,ChinaProject(KJ070617)supported by theChongqing Municipal Education Commission,China
文摘Aluminum films with thickness of 8.78-20.82μm were deposited on the AZ31B magnesium alloys by DC magnetron sputtering.The influences of aluminum film on the micro-mechanical properties and corrosion behavior of the magnesium alloys were investigated.The morphology of aluminum film was examined by scanning electron microscopy and the microstructure of aluminum film was analyzed by X-ray diffiactometry.Nanoindentation and nanoscratch tests were conducted to investigate their micromechanical properties.Moreover,potentiodynamical polarization test performed in 3.5%NaCl solution was carried out to study their anticorrosion performances.The results show that the surface hardness of AZ31B magnesium alloy with aluminum film is 1.38-2.01 GPa,higher than that of the magnesium alloy substrate.The critical load of Al film/AZ31B substrate is in the range of 0.68-2.77 N. The corrosion current density of AZ31B with aluminum film is 2-3 orders of magnitude less than that of bare AZ31B.And the corrosion potential with aluminum film positively shifts.Thus aluminum film can increase the corrosion resistance of Mg alloys obviously.
基金Supported by National Natural Science Foundation of China(Grant No.51605078)Science Fund for Creative Research Groups of NSFC(51621064)National Basic Research Program of China(973 Program,Grant No.2015CB057304)
文摘Surfaces with controllable micro structures are significant in fundamental development of superhydrophobicity. However,preparation of superhydrophobic surfaces with array structures on metal substrates is not effective using existing methods. A new method was presented to fabricate super-hydrophobic post arrays on aluminum(Al) substrates using mask electrochemical machining and fluoridation. Electrochemical etching was first applied on Al plates with pre-prepared photoresist arrays to make the post array structures. Surface modification was subsequently applied to reduce the surface energy, followed by interaction with water to realize superhydrophobicity. Simulation and experimental verification were conducted to investigate how machining parameters affect the array structures. Analysis of the water contact angle was implemented to explore the relationship between wettability and micro structures.The results indicate that superhydrophobic surfaces with controllable post structures can be fabricated through this proposed method, producing surfaces with high water static contact angles.
基金Project(50171026) supported by the National Natural Science Foundation of ChinaProject (SKLT04-08) supported by the State Key Laboratory of Tribology, Tsinghua University, China
文摘The ceramic coatings containing zirconium dioxide were grown in-situ on LY12 aluminium alloy by micro-arc oxidation in mixed zirconate and phosphate solution. The phase composition and morphology of the coatings were studied by XRD and SEM. The adhesive strength of ceramic coatings was assessed by thermal shock test and tensile test. The results show that the coating is composed of m-ZrO2,t-ZrO2, and a littleγ-Al2O3. Along the section of the coating, t-ZrO2 is more on both sides than that in the middle, while m-ZrO2 is more in the middle than that on both sides. Meantime the coating is also composed of a dense layer and a loose layer. The coating has excellent thermal shock resistance under 550℃and 600℃. And tensile tests show the adhesive strength of the dense layer of the coating with the substrate is more than 17.5 MPa.
文摘Micro plasma oxidation(MPO) has recently been investigated as a novel, rapid and effective means to provide modified surfaces with improved properties of load bearing and wear resistance on light alloys particularly aluminum alloys. MPO is a multifactor-controlled process, these factors must be controlled to produce high quality coatings. The main research emphasis in MPO coating development over the past years seems to be the attainment of higher hardness levels and thick coatings. The porosity of MPO coating is the most complex phenomenon affecting the distribution, levels and the measurements of the hardness; and it is controlled by suitable selection of important parameters such as the electrical conditions. Ceramics coatings were synthesized on Al substrate by MPO to examine the effects of adding a cathodic phase alternated with anodic-cathodic current on the porosity and hardness characteristics of coatings by X-ray diffraction(XRD), scanning electron microscopy(SEM), and microhardness tester. The coatings produced by the combined mode are more dense and less porous than that by the anodic-cathodic mode. (Microhardness) test shows that the coatings produced by the combined mode exhibit both the highest hardness, and less reduction percentage in hardness with increasing the coatings thickness. These improvements become more significant for the polished and thicker coatings.
文摘The electrolyte temperature has a great influence on the performance of the coating prepared by micro-arc oxidation (MAO). The behavior of MAO discharge in the changing electrolyte temperature has been investigated. Compared to constant electrolyte temperature in conventional MAO process, the process has different discharge characteristics under the changing electrolyte temperature. The amplitude of pulse voltage was detected to study the change of discharge characteristic under the constant-current control of MAO power supply. Three successive discharge stages were differentiated by the variable the pulse voltage versus process time. Since there were significant changes in the sound, the sound signals were acquired and the audio analysis was used to describe the changing of the MAO discharge at different stages. Optical emission spectroscopy (OES) was employed in situ to unveil how the micro-discharge changed with the temperature increasing. Scanning electron microscopy (SEM) was used to characterize the morphology of the coatings on 6N01 aluminum alloy prepared by normal process with the constant-temperature control of the MAO electrolyte and by the process under the changing electrolyte temperature. A mode of film growth and micro-discharge was given to describe the effects of the changing electrolyte temperature in the whole MAO process.
文摘Microstructure evolution of wrought aluminum alloy extruded rods and the mechanism of liquid phase formation during reheating were investigated. And the relation between the volume fraction of liquid phase and the recrystallization microstructure was proposed. The results show that increase in reheating temperature and time can augment the volume fraction of liquid phase and accelerate the grain spheroidization, as a result of which the requirement of semi-solid forming can be satisfied. Due to the higher aberration energy of grain boundary, the melting point is lowered as a result of the easy diffusion of atoms. At higher reheating temperature the grain boundary melts, the growth of the recrystallized grain is inhibited and the grain is refined. The composition of the low melt-point phase along the recrystallized grains was determined using EDS. It can be seen from the experimental results that when the extrusion rod of the wrought aluminum alloy is reheated at 610℃ for 20min, perfect fine equiaxial grains can be obtained, the average grain size is about 66.34μm and the volume fraction of solid phase is about 68%.
