BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during or...BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during orthodontic treatment,an immediate pause of orthodontic adjustments is recommended;the treatment can resume when the symptoms are managed and stabilized.CASE SUMMARY This case report presents a patient(26-year-old,female)with angle class I,skeletal class II and TMDs.The treatment was a hybrid of clear aligners,fixed appliances and temporary anchorage devices(TADs).After 3 mo resting and treatment on her TMD,the patient’s TMD symptom alleviated,but her anterior occlusion displayed deep overbite.Therefore,the fixed appliances with TAD were used to correct the anterior deep-bite and level maxillary and mandibular deep curves.After the levelling,the patient showed dual bite with centric relation and maximum intercuspation discrepancy on her occlusion.After careful examination of temporomandibular joints(TMJ)position,the stable bite splint and Invisible Mandibular Advancement appliance were used to reconstruct her occlusion.Eventually,the improved facial appearance and relatively stable occlusion were achieved.The 1-year follow-up records showed there was no obvious change in TMJ morphology,and her occlusion was stable.CONCLUSION TMD screening and monitoring is of great clinical importance in the TMD susceptible patients.Hybrid treatment with clear aligners and fixed appliances and TADs is an effective treatment modality for the complex cases.展开更多
Extensive numerical simulations and scaling analysis are performed to investigate competitive growth between the linear and nonlinear stochastic dynamic growth systems, which belong to the Edwards–Wilkinson(EW) and K...Extensive numerical simulations and scaling analysis are performed to investigate competitive growth between the linear and nonlinear stochastic dynamic growth systems, which belong to the Edwards–Wilkinson(EW) and Kardar–Parisi–Zhang(KPZ) universality classes, respectively. The linear growth systems include the EW equation and the model of random deposition with surface relaxation(RDSR), the nonlinear growth systems involve the KPZ equation and typical discrete models including ballistic deposition(BD), etching, and restricted solid on solid(RSOS). The scaling exponents are obtained in both the(1 + 1)-and(2 + 1)-dimensional competitive growth with the nonlinear growth probability p and the linear proportion 1-p. Our results show that, when p changes from 0 to 1, there exist non-trivial crossover effects from EW to KPZ universality classes based on different competitive growth rules. Furthermore, the growth rate and the porosity are also estimated within various linear and nonlinear growths of cooperation and competition.展开更多
This study analyzed the difference between using a downward breaststroke kick and a horizontal breaststroke kick in a sample of world class elite swimmers.We compared average muscle activity of the gluteus maximus,qua...This study analyzed the difference between using a downward breaststroke kick and a horizontal breaststroke kick in a sample of world class elite swimmers.We compared average muscle activity of the gluteus maximus,quadriceps femoris(vastus medialis and rectus femoris),hamstring/long head of the biceps femoris,gastrocnemius medialis,rectus abdominal,and erector spinae when using the downward breaststroke kick technique.We find that when this sample of swimmers utilized the downward breaststroke kick,max speed and velocity per stroke increased,measured by 12,788 EMG samples,where the results are highly correlated to duration of the aerodynamic buoyant force in breaststroke kick technique.The increases in performance observed from measuring the world class elite swimmers is highly correlated to the duration of the kick aerodynamic buoyant force.Among this sample of elite swimmers,the longer a swimmer demonstrates a buoyant force breaststroke kick,the lower the time in a 100 breaststroke.展开更多
The professional and moral education of high school mathematics teachers will make classroom management work better,but their work pressure will also lead to classroom management problems.To do a good job in high scho...The professional and moral education of high school mathematics teachers will make classroom management work better,but their work pressure will also lead to classroom management problems.To do a good job in high school class teacher management and organically integrate it with mathematics teaching,we need to start from two aspects:mathematics teaching class teachers and class teacher work teaching,and penetrate mathematical thinking into daily classroom management,moral education,and classroom culture construction.Based on the attributes of the subject,we guide high school students to reflect after class to stimulate their self-management initiative through the cultivation of qualified class representatives.In addition,it is necessary to skillfully resolve classroom generative problems,change the roles of teachers and students,and integrate classroom management with mathematics teaching.展开更多
One-class classification problem has become a popular problem in many fields, with a wide range of applications in anomaly detection, fault diagnosis, and face recognition. We investigate the one-class classification ...One-class classification problem has become a popular problem in many fields, with a wide range of applications in anomaly detection, fault diagnosis, and face recognition. We investigate the one-class classification problem for second-order tensor data. Traditional vector-based one-class classification methods such as one-class support vector machine (OCSVM) and least squares one-class support vector machine (LSOCSVM) have limitations when tensor is used as input data, so we propose a new tensor one-class classification method, LSOCSTM, which directly uses tensor as input data. On one hand, using tensor as input data not only enables to classify tensor data, but also for vector data, classifying it after high dimensionalizing it into tensor still improves the classification accuracy and overcomes the over-fitting problem. On the other hand, different from one-class support tensor machine (OCSTM), we use squared loss instead of the original loss function so that we solve a series of linear equations instead of quadratic programming problems. Therefore, we use the distance to the hyperplane as a metric for classification, and the proposed method is more accurate and faster compared to existing methods. The experimental results show the high efficiency of the proposed method compared with several state-of-the-art methods.展开更多
Flipped classroom is a brand-new teaching mode both at home and abroad. Its core is to reverse teaching sequence and teaching content by letting students watch self-made videos to learn relatively junior teaching cont...Flipped classroom is a brand-new teaching mode both at home and abroad. Its core is to reverse teaching sequence and teaching content by letting students watch self-made videos to learn relatively junior teaching content before class, thus leaving students adequate space to exert full activities in the classroom to complete knowledge absorption and consolidation. This article focus mainly on the design principles and relevant experiences of video production. In the meanwhile, the article also puts forward instructive suggestions for teachers to make appealing and stylistic videos as well as mobilize the enthusiasm of students.Video as the stepping stone only serves as a media to convey knowledge before class, the class is the core to convert students' traditional role to be the real master by a series of effective activities, which should be carefully designed by teachers. So the second focus of the articles falls on the design principles of in-class activities.展开更多
Efficient synthesis of transition metal hydroxides on conductive substrate is essential for enhancing their merits in industrialization of energy storage field.However,most of the synthetic routes at present mainly re...Efficient synthesis of transition metal hydroxides on conductive substrate is essential for enhancing their merits in industrialization of energy storage field.However,most of the synthetic routes at present mainly rely on traditional bottom-up method,which involves tedious steps,time-consuming treatments,or additional alkaline media,and is unfavorable for high-efficiency production.Herein,we present a facile,ultrafast and general avenue to synthesize transition metal hydroxides on carbon substrate within 13 s by Joule-heating method.With high reaction kinetics caused by the instantaneous high temperature,seven kinds of transition metal-layered hydroxides(TM-LDHs)are formed on carbon cloth.Therein,the fastest synthesis rate reaches~0.46 cm^(2)s^(-1).Density functional theory calculations further demonstrate the nucleation energy barriers and potential mechanism for the formation of metal-based hydroxides on carbon substrates.This efficient approach avoids the use of extra agents,multiple steps,and long production time and endows the LDHs@carbon cloth with outstanding flexibility and machinability,showing practical advantages in both common and micro-zinc ion-based energy storage devices.To prove its utility,as a cathode in rechargeable aqueous alkaline Zn(micro-)battery,the NiCo LDH@carbon cloth exhibits a high energy density,superior to most transition metal LDH materials reported so far.展开更多
Precise quantifi cation of climate-growth relationships can make a major contribution to scientifi c forest management.However,whether diff erences in the response of growth to climate at diff erent altitudes remains ...Precise quantifi cation of climate-growth relationships can make a major contribution to scientifi c forest management.However,whether diff erences in the response of growth to climate at diff erent altitudes remains unclear.To answer this,264 trees of Larix kaempferi from 88 plots,representing diff erent altitudinal ranges(1000-2100 m)and tree classes were sampled and used to develop tree-ring chronologies.Tree-ring growth(TRG)was either positively(dominant)or negatively(intermediate and suppressed)correlated with climate in diff erent tree classes at diff erent altitudes.TRG was strongly correlated with growing season at low altitudes,but was less sensitive to climate at middle altitudes.It was mainly limited by precipitation and was highly sensitive to climate at low altitudes.Climate-growth relationships at high altitudes were opposite compared to those at low altitudes.TRG of dominant trees was more sensitive to climate change compared to intermediate and suppressed trees.Climate factors(annual temperatures;moisture,the number of frost-free days)had diff erent eff ects on tree-ring growth of diff erent tree classes along altitudinal gradients.It was concluded that the increase in summer temperatures decreased water availability,resulting in a signifi cant decline in growth rates after 2005 at lower altitudes.L.kaempferi is suitable for planting in middle altitudes and dominant trees were the best sampling choice for accurately assessing climate-growth relationships.展开更多
Background:Due to the high heterogeneity among hepatocellular carcinoma(HCC)patients receiving transarterial chemoembolization(TACE),the prognosis of patients varies significantly.The decisionmaking on the initiation ...Background:Due to the high heterogeneity among hepatocellular carcinoma(HCC)patients receiving transarterial chemoembolization(TACE),the prognosis of patients varies significantly.The decisionmaking on the initiation and/or repetition of TACE under different liver functions is a matter of concern in clinical practice.Thus,we aimed to develop a prediction model for TACE candidates using risk stratification based on varied liver function.Methods:A total of 222 unresectable HCC patients who underwent TACE as their only treatment were included in this study.Cox proportional hazards regression was performed to select the independent risk factors and establish a predictive model for the overall survival(OS).The model was validated in patients with different Child-Pugh class and compared to previous TACE scoring systems.Results:The five independent risk factors,including alpha-fetoprotein(AFP)level,maximal tumor size,the increase of albumin-bilirubin(ALBI)grade score,tumor response,and the increase of aspartate aminotransferase(AST),were used to build a prognostic model(ASARA).In the training and validation cohorts,the OS of patients with ASARA score≤2 was significantly higher than that of patients with ASARA score>2(P<0.001,P=0.006,respectively).The ASARA model and its modified version“AS(ARA)”can effectively distinguish the OS(P<0.001,P=0.004)between patients with Child-Pugh class A and B,and the C-index was 0.687 and 0.706,respectively.For repeated TACE,the ASARA model was superior to Assessment for Retreatment with TACE(ART)and ALBI grade,maximal tumor size,AFP,and tumor response(ASAR)among Child-Pugh class A patients.For the first TACE,the performance of AS(ARA)was better than that of modified hepatoma arterial-embolization prognostic(mHAP),mHAP3,and ASA(R)models among Child-Pugh class B patients.Conclusions:The ASARA scoring system is valuable in the decision-making of TACE repetition for HCC patients,especially Child-Pugh class A patients.The modified AS(ARA)can be used to screen the ideal candidate for TACE initiation in Child-Pugh class B patients with poor liver function.展开更多
BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatmen...BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatment plan for a patient initially treated with four-premolar-extraction camouflage, despite indications for orthognathic surgery.CASE SUMMARY A 23-year-old male sought treatment complaining about his unsatisfactory facial appearance. His maxillary first premolars and mandibular second premolars had been extracted, and a fixed appliance had been used to retract his anterior teeth for two years without improvement. He had a convex profile, a gummy smile, lip incompetence, inadequate maxillary incisor inclination, and almost a class I molar relationship. Cephalometric analysis showed severe skeletal class Ⅱ malocclusion(A point-nasion-B point = 11.5°) with a retrognathic mandible(sella-nasion-B point = 75.9°), a protruded maxilla(sella-nasion-A point = 87.4°), and vertical maxillary excess(upper incisor to palatal plane = 33.2 mm). The excessive lingual inclination of the maxillary incisors(upper incisor to nasion-A point line =-5.5°)was due to previous treatment attempts to compensate for the skeletal class Ⅱ malocclusion. The patient was successfully retreated with decompensating orthodontic treatment combined with orthognathic surgery. The maxillary incisors were repositioned and proclined in the alveolar bone, the overjet was increased, and a space was created for orthognathic surgery, including maxillary impaction, anterior maxillary back-setting, and bilateral sagittal split ramus osteotomy to correct his skeletal anteroposterior discrepancy. Gingival display was reduced, and lip competence was restored. In addition, the results remained stable after 2 years. The patient was satisfied with his new profile as well as with the functional malocclusion at the end of treatment.CONCLUSION This case report provides orthodontists a good example of how to treat an adult with severe skeletal class Ⅱ malocclusion with vertical maxillary excess after an unsatisfactory orthodontic camouflage treatment. Orthodontic and orthognathic treatment can significantly correct a patient’s facial appearance.展开更多
Most modern technologies,such as social media,smart cities,and the internet of things(IoT),rely on big data.When big data is used in the real-world applications,two data challenges such as class overlap and class imba...Most modern technologies,such as social media,smart cities,and the internet of things(IoT),rely on big data.When big data is used in the real-world applications,two data challenges such as class overlap and class imbalance arises.When dealing with large datasets,most traditional classifiers are stuck in the local optimum problem.As a result,it’s necessary to look into new methods for dealing with large data collections.Several solutions have been proposed for overcoming this issue.The rapid growth of the available data threatens to limit the usefulness of many traditional methods.Methods such as oversampling and undersampling have shown great promises in addressing the issues of class imbalance.Among all of these techniques,Synthetic Minority Oversampling TechniquE(SMOTE)has produced the best results by generating synthetic samples for the minority class in creating a balanced dataset.The issue is that their practical applicability is restricted to problems involving tens of thousands or lower instances of each.In this paper,we have proposed a parallel mode method using SMOTE and MapReduce strategy,this distributes the operation of the algorithm among a group of computational nodes for addressing the aforementioned problem.Our proposed solution has been divided into three stages.Thefirst stage involves the process of splitting the data into different blocks using a mapping function,followed by a pre-processing step for each mapping block that employs a hybrid SMOTE algo-rithm for solving the class imbalanced problem.On each map block,a decision tree model would be constructed.Finally,the decision tree blocks would be com-bined for creating a classification model.We have used numerous datasets with up to 4 million instances in our experiments for testing the proposed scheme’s cap-abilities.As a result,the Hybrid SMOTE appears to have good scalability within the framework proposed,and it also cuts down the processing time.展开更多
With the rapidly developing economy,the evolution of science technology improves at a high speed.At the same time,a new technology is born which we called Micro-Class.It has been used widely in high education within a...With the rapidly developing economy,the evolution of science technology improves at a high speed.At the same time,a new technology is born which we called Micro-Class.It has been used widely in high education within a short time.The facts indicate,it is helpful to put flipped classroom model into college English lecture environment.The new model not only makes difference in motivating the students' interests of studying,but also improves their autonomy for studying and the participatory for class activities.In terms of this situation,I will make a pointed statement as follow.展开更多
Recently,convolutional neural network(CNN)-based visual inspec-tion has been developed to detect defects on building surfaces automatically.The CNN model demonstrates remarkable accuracy in image data analysis;however...Recently,convolutional neural network(CNN)-based visual inspec-tion has been developed to detect defects on building surfaces automatically.The CNN model demonstrates remarkable accuracy in image data analysis;however,the predicted results have uncertainty in providing accurate informa-tion to users because of the“black box”problem in the deep learning model.Therefore,this study proposes a visual explanation method to overcome the uncertainty limitation of CNN-based defect identification.The visual repre-sentative gradient-weights class activation mapping(Grad-CAM)method is adopted to provide visually explainable information.A visualizing evaluation index is proposed to quantitatively analyze visual representations;this index reflects a rough estimate of the concordance rate between the visualized heat map and intended defects.In addition,an ablation study,adopting three-branch combinations with the VGG16,is implemented to identify perfor-mance variations by visualizing predicted results.Experiments reveal that the proposed model,combined with hybrid pooling,batch normalization,and multi-attention modules,achieves the best performance with an accuracy of 97.77%,corresponding to an improvement of 2.49%compared with the baseline model.Consequently,this study demonstrates that reliable results from an automatic defect classification model can be provided to an inspector through the visual representation of the predicted results using CNN models.展开更多
BACKGROUND Treatment for deep overbite cases can be difficult. This case report presents some techniques with improved super-elastic Ti–Ni alloy wire(ISW) for deep overbite correction.CASE SUMMARY A 21-year-old woman...BACKGROUND Treatment for deep overbite cases can be difficult. This case report presents some techniques with improved super-elastic Ti–Ni alloy wire(ISW) for deep overbite correction.CASE SUMMARY A 21-year-old woman had a chief complaint of flaring maxillary teeth. Orthodontic evaluation revealed a skeletal class Ⅱ malocclusion and a convex profile appearance. A deep overbite with palatal impingement and large overjet were also noted. Bilateral maxillary first premolars were extracted, and spaces were closed using a closed-coil spring and elastic chain. The deep overbite was corrected by applying the ISW curve and ISW intrusion arch. Intermaxillary elastics was used to adjust the intermaxillary relationship. Active treatment took approximately 3 years, and the appearance and dentition alignment noticeably improved.CONCLUSION The use of the ISW technique in a case of skeletal class Ⅱ malocclusion with deep overbite achieved a desirable result, and the patient was satisfied with the treatment outcome.展开更多
基金Natural Science Foundation of Jiangsu Province, No. SBK2021021787the Major Project of the Health Commission ofJiangsu Province, No. ZD2022025and the Key Project of the Nanjing Health Commission, No. ZKX20048.
文摘BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during orthodontic treatment,an immediate pause of orthodontic adjustments is recommended;the treatment can resume when the symptoms are managed and stabilized.CASE SUMMARY This case report presents a patient(26-year-old,female)with angle class I,skeletal class II and TMDs.The treatment was a hybrid of clear aligners,fixed appliances and temporary anchorage devices(TADs).After 3 mo resting and treatment on her TMD,the patient’s TMD symptom alleviated,but her anterior occlusion displayed deep overbite.Therefore,the fixed appliances with TAD were used to correct the anterior deep-bite and level maxillary and mandibular deep curves.After the levelling,the patient showed dual bite with centric relation and maximum intercuspation discrepancy on her occlusion.After careful examination of temporomandibular joints(TMJ)position,the stable bite splint and Invisible Mandibular Advancement appliance were used to reconstruct her occlusion.Eventually,the improved facial appearance and relatively stable occlusion were achieved.The 1-year follow-up records showed there was no obvious change in TMJ morphology,and her occlusion was stable.CONCLUSION TMD screening and monitoring is of great clinical importance in the TMD susceptible patients.Hybrid treatment with clear aligners and fixed appliances and TADs is an effective treatment modality for the complex cases.
基金supported by Undergraduate Training Program for Innovation and Entrepreneurship of China University of Mining and Technology (CUMT)(Grant No. 202110290059Z)Fundamental Research Funds for the Central Universities of CUMT (Grant No. 2020ZDPYMS33)。
文摘Extensive numerical simulations and scaling analysis are performed to investigate competitive growth between the linear and nonlinear stochastic dynamic growth systems, which belong to the Edwards–Wilkinson(EW) and Kardar–Parisi–Zhang(KPZ) universality classes, respectively. The linear growth systems include the EW equation and the model of random deposition with surface relaxation(RDSR), the nonlinear growth systems involve the KPZ equation and typical discrete models including ballistic deposition(BD), etching, and restricted solid on solid(RSOS). The scaling exponents are obtained in both the(1 + 1)-and(2 + 1)-dimensional competitive growth with the nonlinear growth probability p and the linear proportion 1-p. Our results show that, when p changes from 0 to 1, there exist non-trivial crossover effects from EW to KPZ universality classes based on different competitive growth rules. Furthermore, the growth rate and the porosity are also estimated within various linear and nonlinear growths of cooperation and competition.
文摘This study analyzed the difference between using a downward breaststroke kick and a horizontal breaststroke kick in a sample of world class elite swimmers.We compared average muscle activity of the gluteus maximus,quadriceps femoris(vastus medialis and rectus femoris),hamstring/long head of the biceps femoris,gastrocnemius medialis,rectus abdominal,and erector spinae when using the downward breaststroke kick technique.We find that when this sample of swimmers utilized the downward breaststroke kick,max speed and velocity per stroke increased,measured by 12,788 EMG samples,where the results are highly correlated to duration of the aerodynamic buoyant force in breaststroke kick technique.The increases in performance observed from measuring the world class elite swimmers is highly correlated to the duration of the kick aerodynamic buoyant force.Among this sample of elite swimmers,the longer a swimmer demonstrates a buoyant force breaststroke kick,the lower the time in a 100 breaststroke.
文摘The professional and moral education of high school mathematics teachers will make classroom management work better,but their work pressure will also lead to classroom management problems.To do a good job in high school class teacher management and organically integrate it with mathematics teaching,we need to start from two aspects:mathematics teaching class teachers and class teacher work teaching,and penetrate mathematical thinking into daily classroom management,moral education,and classroom culture construction.Based on the attributes of the subject,we guide high school students to reflect after class to stimulate their self-management initiative through the cultivation of qualified class representatives.In addition,it is necessary to skillfully resolve classroom generative problems,change the roles of teachers and students,and integrate classroom management with mathematics teaching.
文摘One-class classification problem has become a popular problem in many fields, with a wide range of applications in anomaly detection, fault diagnosis, and face recognition. We investigate the one-class classification problem for second-order tensor data. Traditional vector-based one-class classification methods such as one-class support vector machine (OCSVM) and least squares one-class support vector machine (LSOCSVM) have limitations when tensor is used as input data, so we propose a new tensor one-class classification method, LSOCSTM, which directly uses tensor as input data. On one hand, using tensor as input data not only enables to classify tensor data, but also for vector data, classifying it after high dimensionalizing it into tensor still improves the classification accuracy and overcomes the over-fitting problem. On the other hand, different from one-class support tensor machine (OCSTM), we use squared loss instead of the original loss function so that we solve a series of linear equations instead of quadratic programming problems. Therefore, we use the distance to the hyperplane as a metric for classification, and the proposed method is more accurate and faster compared to existing methods. The experimental results show the high efficiency of the proposed method compared with several state-of-the-art methods.
文摘Flipped classroom is a brand-new teaching mode both at home and abroad. Its core is to reverse teaching sequence and teaching content by letting students watch self-made videos to learn relatively junior teaching content before class, thus leaving students adequate space to exert full activities in the classroom to complete knowledge absorption and consolidation. This article focus mainly on the design principles and relevant experiences of video production. In the meanwhile, the article also puts forward instructive suggestions for teachers to make appealing and stylistic videos as well as mobilize the enthusiasm of students.Video as the stepping stone only serves as a media to convey knowledge before class, the class is the core to convert students' traditional role to be the real master by a series of effective activities, which should be carefully designed by teachers. So the second focus of the articles falls on the design principles of in-class activities.
基金the NSFC(22075019)National Key R&D Program of China(2017YFB1104300)。
文摘Efficient synthesis of transition metal hydroxides on conductive substrate is essential for enhancing their merits in industrialization of energy storage field.However,most of the synthetic routes at present mainly rely on traditional bottom-up method,which involves tedious steps,time-consuming treatments,or additional alkaline media,and is unfavorable for high-efficiency production.Herein,we present a facile,ultrafast and general avenue to synthesize transition metal hydroxides on carbon substrate within 13 s by Joule-heating method.With high reaction kinetics caused by the instantaneous high temperature,seven kinds of transition metal-layered hydroxides(TM-LDHs)are formed on carbon cloth.Therein,the fastest synthesis rate reaches~0.46 cm^(2)s^(-1).Density functional theory calculations further demonstrate the nucleation energy barriers and potential mechanism for the formation of metal-based hydroxides on carbon substrates.This efficient approach avoids the use of extra agents,multiple steps,and long production time and endows the LDHs@carbon cloth with outstanding flexibility and machinability,showing practical advantages in both common and micro-zinc ion-based energy storage devices.To prove its utility,as a cathode in rechargeable aqueous alkaline Zn(micro-)battery,the NiCo LDH@carbon cloth exhibits a high energy density,superior to most transition metal LDH materials reported so far.
基金funded by Fundamental Research Funds of CAF (CAFYBB2022ZA00103)National Natural Science Foundation of China (General Program)(31971652)+1 种基金National Natural Science Foundation of China (32001308)Fundamental Research Funds of CAF (CAFYBB2022ZC001)
文摘Precise quantifi cation of climate-growth relationships can make a major contribution to scientifi c forest management.However,whether diff erences in the response of growth to climate at diff erent altitudes remains unclear.To answer this,264 trees of Larix kaempferi from 88 plots,representing diff erent altitudinal ranges(1000-2100 m)and tree classes were sampled and used to develop tree-ring chronologies.Tree-ring growth(TRG)was either positively(dominant)or negatively(intermediate and suppressed)correlated with climate in diff erent tree classes at diff erent altitudes.TRG was strongly correlated with growing season at low altitudes,but was less sensitive to climate at middle altitudes.It was mainly limited by precipitation and was highly sensitive to climate at low altitudes.Climate-growth relationships at high altitudes were opposite compared to those at low altitudes.TRG of dominant trees was more sensitive to climate change compared to intermediate and suppressed trees.Climate factors(annual temperatures;moisture,the number of frost-free days)had diff erent eff ects on tree-ring growth of diff erent tree classes along altitudinal gradients.It was concluded that the increase in summer temperatures decreased water availability,resulting in a signifi cant decline in growth rates after 2005 at lower altitudes.L.kaempferi is suitable for planting in middle altitudes and dominant trees were the best sampling choice for accurately assessing climate-growth relationships.
基金This study was supported by a grant from Tianjin Key Medical Discipline(Specialty)Construction Project.
文摘Background:Due to the high heterogeneity among hepatocellular carcinoma(HCC)patients receiving transarterial chemoembolization(TACE),the prognosis of patients varies significantly.The decisionmaking on the initiation and/or repetition of TACE under different liver functions is a matter of concern in clinical practice.Thus,we aimed to develop a prediction model for TACE candidates using risk stratification based on varied liver function.Methods:A total of 222 unresectable HCC patients who underwent TACE as their only treatment were included in this study.Cox proportional hazards regression was performed to select the independent risk factors and establish a predictive model for the overall survival(OS).The model was validated in patients with different Child-Pugh class and compared to previous TACE scoring systems.Results:The five independent risk factors,including alpha-fetoprotein(AFP)level,maximal tumor size,the increase of albumin-bilirubin(ALBI)grade score,tumor response,and the increase of aspartate aminotransferase(AST),were used to build a prognostic model(ASARA).In the training and validation cohorts,the OS of patients with ASARA score≤2 was significantly higher than that of patients with ASARA score>2(P<0.001,P=0.006,respectively).The ASARA model and its modified version“AS(ARA)”can effectively distinguish the OS(P<0.001,P=0.004)between patients with Child-Pugh class A and B,and the C-index was 0.687 and 0.706,respectively.For repeated TACE,the ASARA model was superior to Assessment for Retreatment with TACE(ART)and ALBI grade,maximal tumor size,AFP,and tumor response(ASAR)among Child-Pugh class A patients.For the first TACE,the performance of AS(ARA)was better than that of modified hepatoma arterial-embolization prognostic(mHAP),mHAP3,and ASA(R)models among Child-Pugh class B patients.Conclusions:The ASARA scoring system is valuable in the decision-making of TACE repetition for HCC patients,especially Child-Pugh class A patients.The modified AS(ARA)can be used to screen the ideal candidate for TACE initiation in Child-Pugh class B patients with poor liver function.
文摘BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatment plan for a patient initially treated with four-premolar-extraction camouflage, despite indications for orthognathic surgery.CASE SUMMARY A 23-year-old male sought treatment complaining about his unsatisfactory facial appearance. His maxillary first premolars and mandibular second premolars had been extracted, and a fixed appliance had been used to retract his anterior teeth for two years without improvement. He had a convex profile, a gummy smile, lip incompetence, inadequate maxillary incisor inclination, and almost a class I molar relationship. Cephalometric analysis showed severe skeletal class Ⅱ malocclusion(A point-nasion-B point = 11.5°) with a retrognathic mandible(sella-nasion-B point = 75.9°), a protruded maxilla(sella-nasion-A point = 87.4°), and vertical maxillary excess(upper incisor to palatal plane = 33.2 mm). The excessive lingual inclination of the maxillary incisors(upper incisor to nasion-A point line =-5.5°)was due to previous treatment attempts to compensate for the skeletal class Ⅱ malocclusion. The patient was successfully retreated with decompensating orthodontic treatment combined with orthognathic surgery. The maxillary incisors were repositioned and proclined in the alveolar bone, the overjet was increased, and a space was created for orthognathic surgery, including maxillary impaction, anterior maxillary back-setting, and bilateral sagittal split ramus osteotomy to correct his skeletal anteroposterior discrepancy. Gingival display was reduced, and lip competence was restored. In addition, the results remained stable after 2 years. The patient was satisfied with his new profile as well as with the functional malocclusion at the end of treatment.CONCLUSION This case report provides orthodontists a good example of how to treat an adult with severe skeletal class Ⅱ malocclusion with vertical maxillary excess after an unsatisfactory orthodontic camouflage treatment. Orthodontic and orthognathic treatment can significantly correct a patient’s facial appearance.
文摘Most modern technologies,such as social media,smart cities,and the internet of things(IoT),rely on big data.When big data is used in the real-world applications,two data challenges such as class overlap and class imbalance arises.When dealing with large datasets,most traditional classifiers are stuck in the local optimum problem.As a result,it’s necessary to look into new methods for dealing with large data collections.Several solutions have been proposed for overcoming this issue.The rapid growth of the available data threatens to limit the usefulness of many traditional methods.Methods such as oversampling and undersampling have shown great promises in addressing the issues of class imbalance.Among all of these techniques,Synthetic Minority Oversampling TechniquE(SMOTE)has produced the best results by generating synthetic samples for the minority class in creating a balanced dataset.The issue is that their practical applicability is restricted to problems involving tens of thousands or lower instances of each.In this paper,we have proposed a parallel mode method using SMOTE and MapReduce strategy,this distributes the operation of the algorithm among a group of computational nodes for addressing the aforementioned problem.Our proposed solution has been divided into three stages.Thefirst stage involves the process of splitting the data into different blocks using a mapping function,followed by a pre-processing step for each mapping block that employs a hybrid SMOTE algo-rithm for solving the class imbalanced problem.On each map block,a decision tree model would be constructed.Finally,the decision tree blocks would be com-bined for creating a classification model.We have used numerous datasets with up to 4 million instances in our experiments for testing the proposed scheme’s cap-abilities.As a result,the Hybrid SMOTE appears to have good scalability within the framework proposed,and it also cuts down the processing time.
文摘With the rapidly developing economy,the evolution of science technology improves at a high speed.At the same time,a new technology is born which we called Micro-Class.It has been used widely in high education within a short time.The facts indicate,it is helpful to put flipped classroom model into college English lecture environment.The new model not only makes difference in motivating the students' interests of studying,but also improves their autonomy for studying and the participatory for class activities.In terms of this situation,I will make a pointed statement as follow.
基金supported by a Korea Agency for Infrastructure Technology Advancement(KAIA)grant funded by the Ministry of Land,Infrastructure,and Transport(Grant 22CTAP-C163951-02).
文摘Recently,convolutional neural network(CNN)-based visual inspec-tion has been developed to detect defects on building surfaces automatically.The CNN model demonstrates remarkable accuracy in image data analysis;however,the predicted results have uncertainty in providing accurate informa-tion to users because of the“black box”problem in the deep learning model.Therefore,this study proposes a visual explanation method to overcome the uncertainty limitation of CNN-based defect identification.The visual repre-sentative gradient-weights class activation mapping(Grad-CAM)method is adopted to provide visually explainable information.A visualizing evaluation index is proposed to quantitatively analyze visual representations;this index reflects a rough estimate of the concordance rate between the visualized heat map and intended defects.In addition,an ablation study,adopting three-branch combinations with the VGG16,is implemented to identify perfor-mance variations by visualizing predicted results.Experiments reveal that the proposed model,combined with hybrid pooling,batch normalization,and multi-attention modules,achieves the best performance with an accuracy of 97.77%,corresponding to an improvement of 2.49%compared with the baseline model.Consequently,this study demonstrates that reliable results from an automatic defect classification model can be provided to an inspector through the visual representation of the predicted results using CNN models.
文摘BACKGROUND Treatment for deep overbite cases can be difficult. This case report presents some techniques with improved super-elastic Ti–Ni alloy wire(ISW) for deep overbite correction.CASE SUMMARY A 21-year-old woman had a chief complaint of flaring maxillary teeth. Orthodontic evaluation revealed a skeletal class Ⅱ malocclusion and a convex profile appearance. A deep overbite with palatal impingement and large overjet were also noted. Bilateral maxillary first premolars were extracted, and spaces were closed using a closed-coil spring and elastic chain. The deep overbite was corrected by applying the ISW curve and ISW intrusion arch. Intermaxillary elastics was used to adjust the intermaxillary relationship. Active treatment took approximately 3 years, and the appearance and dentition alignment noticeably improved.CONCLUSION The use of the ISW technique in a case of skeletal class Ⅱ malocclusion with deep overbite achieved a desirable result, and the patient was satisfied with the treatment outcome.