Drinking water is supplied through a centralized water supply system and may not be accessed by communities in rural areas of Malaysia.This study investigated the performance of a low-cost, self-prepared combined acti...Drinking water is supplied through a centralized water supply system and may not be accessed by communities in rural areas of Malaysia.This study investigated the performance of a low-cost, self-prepared combined activated carbon and sand filtration(CACSF) system for roofharvested rainwater and lake water for potable use. Activated carbon was self-prepared using locally sourced coconut shell and was activated using commonly available salt rather than a high-tech procedure that requires a chemical reagent. The filtration chamber was comprised of local,readily available sand. The experiments were conducted with varying antecedent dry intervals(ADIs) of up to 15 d and lake water with varying initial chemical oxygen demand(COD) concentration. The CACSF system managed to produce effluents complying with the drinking water standards for the parameters p H, dissolved oxygen(DO), biochemical oxygen demand(BOD5), COD, total suspended solids(TSS), and ammonia nitrogen(NH_3-N). The CACSF system successfully decreased the population of Escherichia coli(E. coli) in the influents to less than 30 CFU/m L. Samples with a higher population of E. coli(that is, greater than 30 CFU/m L) did not show 100% removal. The system also showed high potential as an alternative for treated drinking water for roof-harvested rainwater and class II lake water.展开更多
The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. The physicochemical interaction forces between the filter media and suspended particles and their influence on deep ...The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. The physicochemical interaction forces between the filter media and suspended particles and their influence on deep bed filtration process were also studied theoretically. Through the comparison of the hydraulic and physicochemical forces, the key influencing factors on the filtration process were proposed and investigated. Pilot study of the micro-flocculation deep bed filtration was carried out in the No. 9 Potable Water Treatment Plant of Beijing, and the experimental results of hydraulic head loss, particle distribution and entrapment were presented. The theoretical prediction was reasonably consistent with the experimental results under different conditions, which indicated that the regulation and control of micro-flocculation and deep bed filtration could be realized by the evaluation of the physicochemical interactions. Further theoretical and experimental research should be carried out to investigate the interaction mechanism and its application in the deep bed filtration and other cases.展开更多
The study of flow behaviour of water-sand mixtures in fractured rocks is of great necessity to understand the producing mechanism and prevention of water inrush and sand gushing accidents.A self-developed seepage test...The study of flow behaviour of water-sand mixtures in fractured rocks is of great necessity to understand the producing mechanism and prevention of water inrush and sand gushing accidents.A self-developed seepage test system is used in this paper to conduct laboratory experiments in order to study the influence of the particle size distribution,the void ratio,and the initial mass of Aeolian sand on the flow behavior.It is concluded that the water flow velocity is insensitive to the initial mass of the Aeolian sand but increases with the power exponent in the Talbot formula and the specimen height.The outflow of the Aeolian sand increases with the power exponent in the Talbot formula,the specimen height,and the initial mass of the Aeolian sand.Besides,the outflow of the Aeolian sand changes exponentially with the water flow velocity.Finally,it is found that the fractured specimen has a maximum sand filtration capacity beyond which the outflow of the Aeolian sand significantly increases with the initial mass of the Aeolian sand.展开更多
The iron and manganese absorption properties of several filter media were studied. Four plain filter media and six surface-modified media were examined. The surface modification was performed using potassium permangan...The iron and manganese absorption properties of several filter media were studied. Four plain filter media and six surface-modified media were examined. The surface modification was performed using potassium permanganate as a surface treatment. The surface-modified manganese sand was found to be most efficient at removing iron and manganese from water. The metal concentrations in filtered effluent were between 0.01 and 0.04 mg/L, which is far lower than the standard for recycle water. A concen-tration of 5% KMnO4 was found to be most effective as surface modifier. The surface of the manganese sand modified by 5% KMnO4 was examined and found to be covered with a dense membrane of some compound. The membrane had the advantages of uniform texture, large surface area and physical and chemical stability. It was effective at removing iron and manganese from mine water.展开更多
The efficient separation of water-in-oil emulsion is of significance in environment and energy filed,and it has become a world-wide challenge.Herein,we have presented a one-step,facile and low-cost approach to prepare...The efficient separation of water-in-oil emulsion is of significance in environment and energy filed,and it has become a world-wide challenge.Herein,we have presented a one-step,facile and low-cost approach to prepare superhydrophobic sands for efficient separation of water-in-oil emulsion.The as-prepared sand layers possessed a water contact angle higher than 151°,demonstrating their superior superhydrophobic property.Besides,the as-prepared sand layers could separate water-in-emulsions with separation efficiency up to 99.7%,which is superior to both traditional and superwettable filtration membranes.The effect of thickness of sand layer on separation performance was also investigated.The results showed that the filtration flux decreased with the increased of filtration thickness while the separation efficiency increased.The as-prepared sand layer proposed by this study is a processing candidate for separating water-in-oil emulsion in practical industry.Additionally,the as-prepared superhydrophobic sand fabrication method also provides an alternative for desert water storage.展开更多
A novel integrated water treatment facility, inner-recycling continuous sand filter, is discussed. The theory of micro-flocculation is applied in the sand-washing circulation system with continuous filtration and back...A novel integrated water treatment facility, inner-recycling continuous sand filter, is discussed. The theory of micro-flocculation is applied in the sand-washing circulation system with continuous filtration and backwashing. The design and operation parameters, which affect the performance of the filter, are discussed. The key design parameters are provided as follows: diameter of filter material is 0.7 to 1.0 mm, depth of filter bed is 0.6 m, filtration velocity is less than 12 m/h, ratio of gas to water is 9:11 and sand recycling rate is 2 to 4 mm/min.展开更多
基金supported by the Universiti Kebangsaan Malaysia Grant(Grant No.GUP-2014-077)
文摘Drinking water is supplied through a centralized water supply system and may not be accessed by communities in rural areas of Malaysia.This study investigated the performance of a low-cost, self-prepared combined activated carbon and sand filtration(CACSF) system for roofharvested rainwater and lake water for potable use. Activated carbon was self-prepared using locally sourced coconut shell and was activated using commonly available salt rather than a high-tech procedure that requires a chemical reagent. The filtration chamber was comprised of local,readily available sand. The experiments were conducted with varying antecedent dry intervals(ADIs) of up to 15 d and lake water with varying initial chemical oxygen demand(COD) concentration. The CACSF system managed to produce effluents complying with the drinking water standards for the parameters p H, dissolved oxygen(DO), biochemical oxygen demand(BOD5), COD, total suspended solids(TSS), and ammonia nitrogen(NH_3-N). The CACSF system successfully decreased the population of Escherichia coli(E. coli) in the influents to less than 30 CFU/m L. Samples with a higher population of E. coli(that is, greater than 30 CFU/m L) did not show 100% removal. The system also showed high potential as an alternative for treated drinking water for roof-harvested rainwater and class II lake water.
文摘The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. The physicochemical interaction forces between the filter media and suspended particles and their influence on deep bed filtration process were also studied theoretically. Through the comparison of the hydraulic and physicochemical forces, the key influencing factors on the filtration process were proposed and investigated. Pilot study of the micro-flocculation deep bed filtration was carried out in the No. 9 Potable Water Treatment Plant of Beijing, and the experimental results of hydraulic head loss, particle distribution and entrapment were presented. The theoretical prediction was reasonably consistent with the experimental results under different conditions, which indicated that the regulation and control of micro-flocculation and deep bed filtration could be realized by the evaluation of the physicochemical interactions. Further theoretical and experimental research should be carried out to investigate the interaction mechanism and its application in the deep bed filtration and other cases.
基金financially supported by the National Natural Science Foundation of China(Nos.41807209,51778215,51708185,and 51974293)the Young Teacher Foundation of HPU(No.2019XQG-19)+3 种基金the Henan Provincial Youth Talent Promotion Program(No.2020HYTP003)the Jiangsu Province Science Foundation for Youths(No.BK20180658)the Doctor Foundation of Henan Polytechnic University(Nos.B2017-51 and B2017-53)China Postdoctoral Science Foundation(No.2018M632422)。
文摘The study of flow behaviour of water-sand mixtures in fractured rocks is of great necessity to understand the producing mechanism and prevention of water inrush and sand gushing accidents.A self-developed seepage test system is used in this paper to conduct laboratory experiments in order to study the influence of the particle size distribution,the void ratio,and the initial mass of Aeolian sand on the flow behavior.It is concluded that the water flow velocity is insensitive to the initial mass of the Aeolian sand but increases with the power exponent in the Talbot formula and the specimen height.The outflow of the Aeolian sand increases with the power exponent in the Talbot formula,the specimen height,and the initial mass of the Aeolian sand.Besides,the outflow of the Aeolian sand changes exponentially with the water flow velocity.Finally,it is found that the fractured specimen has a maximum sand filtration capacity beyond which the outflow of the Aeolian sand significantly increases with the initial mass of the Aeolian sand.
基金provided by the National Hi-tech Research and Development Program of China (No.2008AA06z305)the National Natural Science Foundation of China (No.50678172)the Science and Technology Research Program of the Ministry of Education of China (No.107022)
文摘The iron and manganese absorption properties of several filter media were studied. Four plain filter media and six surface-modified media were examined. The surface modification was performed using potassium permanganate as a surface treatment. The surface-modified manganese sand was found to be most efficient at removing iron and manganese from water. The metal concentrations in filtered effluent were between 0.01 and 0.04 mg/L, which is far lower than the standard for recycle water. A concen-tration of 5% KMnO4 was found to be most effective as surface modifier. The surface of the manganese sand modified by 5% KMnO4 was examined and found to be covered with a dense membrane of some compound. The membrane had the advantages of uniform texture, large surface area and physical and chemical stability. It was effective at removing iron and manganese from mine water.
基金supported by the Northeast Petroleum University Youth Science Foundation of China (Grant No. 15071120619)Tribology Science Fund of State Key Laboratory of Tribology (No. SKLTKF19B05)
文摘The efficient separation of water-in-oil emulsion is of significance in environment and energy filed,and it has become a world-wide challenge.Herein,we have presented a one-step,facile and low-cost approach to prepare superhydrophobic sands for efficient separation of water-in-oil emulsion.The as-prepared sand layers possessed a water contact angle higher than 151°,demonstrating their superior superhydrophobic property.Besides,the as-prepared sand layers could separate water-in-emulsions with separation efficiency up to 99.7%,which is superior to both traditional and superwettable filtration membranes.The effect of thickness of sand layer on separation performance was also investigated.The results showed that the filtration flux decreased with the increased of filtration thickness while the separation efficiency increased.The as-prepared sand layer proposed by this study is a processing candidate for separating water-in-oil emulsion in practical industry.Additionally,the as-prepared superhydrophobic sand fabrication method also provides an alternative for desert water storage.
文摘A novel integrated water treatment facility, inner-recycling continuous sand filter, is discussed. The theory of micro-flocculation is applied in the sand-washing circulation system with continuous filtration and backwashing. The design and operation parameters, which affect the performance of the filter, are discussed. The key design parameters are provided as follows: diameter of filter material is 0.7 to 1.0 mm, depth of filter bed is 0.6 m, filtration velocity is less than 12 m/h, ratio of gas to water is 9:11 and sand recycling rate is 2 to 4 mm/min.
