The austenitization behaviors of two high niohium-containing X80 pipeline steels with different titanium contents, including the dissolution of microalloying precipitates and the austenite grain growth, were investiga...The austenitization behaviors of two high niohium-containing X80 pipeline steels with different titanium contents, including the dissolution of microalloying precipitates and the austenite grain growth, were investigated by using physical-chemical phase analysis method and microstructural observation. The results illustrated that most niobium could be dissolved into austenite during soaking at 1 180 ℃, whereas little amount of titanium could be dissolved. It was found that during soaking, the austenite grain growth rate was initially high, and then decreased after soaking for 1 h; moreover, the austenite grains grew up more rapidly at temperatures above 1 180 ℃ than below 1 180 ℃. The results show that the steel with titanium content of 0. 016% has a larger austenite grain size than that with titanium content of 0. 012% under the same soaking conditions, which is explained by considering the particle size distribution.展开更多
The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy（TEM）. The effect of precipitation behavior on mechan...The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy（TEM）. The effect of precipitation behavior on mechanical properties was investigated by theoretical calculations. The results showed that 32.9% of V（C,N） precipitates remained undissolved in the austenite during the soaking step of the normalizing process. These precipitates prevented the growth of the austenite grains. During the subsequent cooling process, the dissolved V（C,N） re-precipitated and played a role in precipitation strengthening. The undissolved V（C,N） induced intragranular ferrite nucleation and refined the ferrite grains. Consequently, compared with hot-rolled steel, the normalized steel exhibited increased grain-refining strengthening but diminished precipitation strengthening, leading to an improvement of the impact energy at the expense of about 40 MPa yield strength.展开更多
The fracture splitting property of medium carbon steel 37MnSiS microalloyed with V up to 0. 45% was investigated by using simulated fracture splitting test,for the development of new crackable medium carbon steel to m...The fracture splitting property of medium carbon steel 37MnSiS microalloyed with V up to 0. 45% was investigated by using simulated fracture splitting test,for the development of new crackable medium carbon steel to manufacture high performance connecting rod. Conventional high carbon steel C70S6 was used for comparison. The results show that the volume fraction of both ferrite and V-rich M（ C,N） particles increases,and the pearlite interlamellar spacing decreases with increasing V content,which in turn results in gradual increase of strength and decrease of ductility and impact energy. The fracture splitting property of the tested steel could be improved significantly due to the increase of V content mainly through the precipitation hardening mechanism of fine M（ C,N） precipitates. The fraction of brittle cleavage fracture in the crack initiation area increases noticeably with increasing V content and full brittle cleavage fracture surface could be obtained when V content was increased to 0. 45%. It is concluded that medium carbon steel with V content higher than about 0. 28% possesses not only comparable or even higher mechanical properties with those of conventional steel C70S6,but also excellent fracture splitting property,and therefore,is more suitable to fabricate high performance fracture splitting connecting rod.展开更多
基金Item Sponsored by National Key Technologies Research and Development Program of China(2006BAE03A15)
文摘The austenitization behaviors of two high niohium-containing X80 pipeline steels with different titanium contents, including the dissolution of microalloying precipitates and the austenite grain growth, were investigated by using physical-chemical phase analysis method and microstructural observation. The results illustrated that most niobium could be dissolved into austenite during soaking at 1 180 ℃, whereas little amount of titanium could be dissolved. It was found that during soaking, the austenite grain growth rate was initially high, and then decreased after soaking for 1 h; moreover, the austenite grains grew up more rapidly at temperatures above 1 180 ℃ than below 1 180 ℃. The results show that the steel with titanium content of 0. 016% has a larger austenite grain size than that with titanium content of 0. 012% under the same soaking conditions, which is explained by considering the particle size distribution.
基金Item Sponsored by National Science and Technology Pillar Program of China(2011BAE25B01)
文摘The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy（TEM）. The effect of precipitation behavior on mechanical properties was investigated by theoretical calculations. The results showed that 32.9% of V（C,N） precipitates remained undissolved in the austenite during the soaking step of the normalizing process. These precipitates prevented the growth of the austenite grains. During the subsequent cooling process, the dissolved V（C,N） re-precipitated and played a role in precipitation strengthening. The undissolved V（C,N） induced intragranular ferrite nucleation and refined the ferrite grains. Consequently, compared with hot-rolled steel, the normalized steel exhibited increased grain-refining strengthening but diminished precipitation strengthening, leading to an improvement of the impact energy at the expense of about 40 MPa yield strength.
基金Item Sponsored by National High Technology Research and Development Program of China(2013AA031605)
文摘The fracture splitting property of medium carbon steel 37MnSiS microalloyed with V up to 0. 45% was investigated by using simulated fracture splitting test,for the development of new crackable medium carbon steel to manufacture high performance connecting rod. Conventional high carbon steel C70S6 was used for comparison. The results show that the volume fraction of both ferrite and V-rich M（ C,N） particles increases,and the pearlite interlamellar spacing decreases with increasing V content,which in turn results in gradual increase of strength and decrease of ductility and impact energy. The fracture splitting property of the tested steel could be improved significantly due to the increase of V content mainly through the precipitation hardening mechanism of fine M（ C,N） precipitates. The fraction of brittle cleavage fracture in the crack initiation area increases noticeably with increasing V content and full brittle cleavage fracture surface could be obtained when V content was increased to 0. 45%. It is concluded that medium carbon steel with V content higher than about 0. 28% possesses not only comparable or even higher mechanical properties with those of conventional steel C70S6,but also excellent fracture splitting property,and therefore,is more suitable to fabricate high performance fracture splitting connecting rod.
