Comparison of Di-n-methyl Phthalate Biodegradation by Free and Immobilized Microbial Cells

To compare the biodegradation of di-n-methyl pathalate by free and immobilized microbial cells. Methods The enrichment and isolation technique was used to isolate the microorganism. The PAV-entrapment method was utilized to immobilize the microorganisms. The scanning electron microscophy (SEM) was used to observe the growth and distribution of microbial cells immobilized inside the PVA bead gels. The GC/MS method was used to identify the main intermediates of DMP degradation. Results The microbial cells could grow quite well in PVA gel. The metabolic pathway did not change before and after immobilization of the microbial cells. The degradation rate of immobilized cells was higher than that of free cells. Conclusion The immobilized microbial cells possess advantages than free cells when applied to the biodegradation of toxic organic pollutants.

Tailoring Iron-Ion Release of Cellulose-Based Aerogel-Coated Iron Foam for Long-Term High-Power Microbial Fuel Cells

The presence of iron(Fe) has been found to favor power generation in microbial fuel cells(MFCs). To achieve long-term power production in MFCs, it is crucial to effectively tailor the release of Fe ions over extended operating periods. In this study, we developed a composite anode(A/IF) by coating iron foam with cellulose-based aerogel. The concentration of Fe ions in the anode solution of A/IF anode reaches 0.280 μg/mL(Fe^(2+) vs. Fe^(3+) = 61%:39%) after 720 h of aseptic primary cell operation. This value was significantly higher than that(0.198 μg/mL, Fe^(2+) vs. Fe^(3+) = 92%:8%) on uncoated iron foam(IF), indicating a continuous release of Fe ions over long-term operation. Notably, the resulting MFCs hybrid cell exhibited a 23% reduction in Fe ion concentration(compared to a 47% reduction for the IF anode) during the sixth testing cycle(600-720 h). It achieved a high-power density of 301 ± 55 mW/m^(2) at 720 h, which was 2.62 times higher than that of the IF anode during the same period. Furthermore, a sedimentary microbial fuel cell(SMFCs) was constructed in a marine environment, and the A/IF anode demonstrated a power density of 103 ± 3 mW/m^(2) at 3240 h, representing a 75% improvement over the IF anode. These findings elucidate the significant enhancement in long-term power production performance of MFCs achieved through effective tailoring of Fe ions release during operation.

The biofilm characteristics and enhanced performance of a marine microbial-electrolysis-cell-based biosensor under positive anodic potential

Microbial fuel cells have already been used as biosensors to monitor assimilable organic carbon(AOC).However,their signal production from AOC is known to be completely suppressed by dissoved oxygen(DO).In this study,two identical microbial electrolysis cell(MEC)based biosensors were inoculated with marine sediment and operated at two different anodic potentials,namely-300 mV and+250 mV relative to Ag/AgCl.The MEC biosensor operated under positive anodic potential conditions had electrochemically active microbial communities on the anode,including members of the Shewanellaceae,Pseudoalteromonadaceae,and Clostridiaceae families.However,the strictly anaerobic members of the Desulfuromonadaceae,Desulfobulbaceae and Desulfobacteraceae families were found only in the negative anodic potential MEC biosensor.The positive anodic potential MEC biosensor showed several other advantages as well,such as faster start-up,significantly higher maximum current production,fivefold improvement in the AOC detection limit,and tolerance of low dissolved oxygen,compared to those obtained from the negative anodic potential MEC biosensor.The developed positive anodic potential MEC biosensor can thus be used as a real-time and inexpensive detector of AOC concentrations in high saline and low DO seawater.

Hydrogen production performance of the non⁃platinum⁃based MoS_(2)/CuS cathode in microbial electrolytic cells

MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.

Design and construction of microbial cell factories based on systems biology

Environmental sustainability is an increasingly important issue in industry.As an environmentally friendly and sustainable way,constructing microbial cell factories to produce all kinds of valuable products has attracted more and more attention.In the process of constructing microbial cell factories,systems biology plays a crucial role.This review summarizes the recent applications of systems biology in the design and construction of microbial cell factories from four perspectives,including functional genes/enzymes discovery,bottleneck pathways identification,strains tolerance improvement and design and construction of synthetic microbial consortia.Systems biology tools can be employed to identify functional genes/enzymes involved in the biosynthetic pathways of products.These discovered genes are introduced into appropriate chassis strains to build engineering microorganisms capable of producing products.Subsequently,systems biology tools are used to identify bottleneck pathways,improve strains tolerance and guide design and construction of synthetic microbial consortia,resulting in increasing the yield of engineered strains and constructing microbial cell factories successfully.

Scalability of biomass-derived graphene derivative materials as viable anode electrode for a commercialized microbial fuel cell: A systematic review

Microbial fuel cell(MFC) is an advanced bioelectrochemical technique that can utilize biomass materials in the process of simultaneously generating electricity and biodegrading or bio transforming toxic pollutants from wastewater. The overall performance of the system is largely dependent on the efficiency of the anode electrode to enhance electron transportation. Furthermore, the anode electrode has a significant impact on the overall cost of MFC setup. Hence, the need to explore research focused towards developing cost-effective material as anode in MFC. This material must also have favourable properties for electron transportation. Graphene oxide(GO) derivatives and its modification with nanomaterials have been identified as a viable anode material. Herein, we discussed an economically effective strategy for the synthesis of graphene derivatives from waste biomass materials and its subsequent fabrication into anode electrode for MFC applications. This review article offers a promising approach towards replacing commercial graphene materials with biomass-derived graphene derivatives in a view to achieve a sustainable and commercialized MFC.

Bimetallic catalysts as electrocatalytic cathode materials for the oxygen reduction reaction in microbial fuel cell:A review

Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(ORR) kinetics on the cathode remains by far the most critical bottleneck hindering the practical application of MFC. An ideal cathode catalyst should possess excellent ORR activity, stability, and costeffectiveness, experiments have demonstrated that bimetallic catalysts are one of the most promising ORR catalysts currently. Based on this, this review mainly analyzes the reaction mechanism(ORR mechanisms, synergistic effects), advantages(combined with characterization technologies), and typical synthesis methods of bimetallic catalysts, focusing on the application effects of early Pt-M(M = Fe, Co, and Ni) alloys to bifunctional catalysts in MFC, pointing out that the main existing challenges remain economic analysis, long-term durability and large-scale application, and looking forward to this. At last, the research trend of bimetallic catalysts suitable for MFC is evaluated, and it is considered that the development and research of metal-organic framework(MOF)-based bimetallic catalysts are still worth focusing on in the future, intending to provide a reference for MFC to achieve energy-efficient wastewater treatment.

Three-Dimensional N-Doped Carbon Nanotube/Graphene Composite Aerogel Anode to Develop High-Power Microbial Fuel Cell

Optimizing the structure of electrode materials is one of the most effective strategies for designing high-power microbial fuel cells(MFCs).However,electrode materials currently suffer from a series of shortcomings that limit the output of MFCs,such as high intrinsic resistance,poor electrolyte wettability,and low microbial load capacity.Here,a three-dimensional(3D)nitrogen-doped multiwalled carbon nanotube/graphene(N-MWCNT/GA)composite aerogel is synthesized as the anode for MFCs.Comparing nitrogen-doped GA,MWCNT/GA,and N-MWCNT/GA,the macroporous hydrophilic N-MWCNT/GA electrode with an average pore size of 4.24μm enables high-density loading of the microbes and facilitates extracellular electron transfer with low intrinsic resistance.Consequently,the hydrophilic surface of N-MWCNT can generate high charge mobility,enabling a high-power output performance of the MFC.In consequence,the MFC system based on N-MWCNT/GA anode exhibits a peak power density and output voltage of 2977.8 mW m^(−2)and 0.654 V,which are 1.83 times and 16.3%higher than those obtained with MWCNT/GA,respectively.These results demonstrate that 3D N-MWCNT/GA anodes can be developed for high-power MFCs in different environments by optimizing their chemical and microstructures.

The growth of biopolymers and natural earthen sources as membrane/separator materials for microbial fuel cells:A comprehensive review

Microbial fuel cell(MFC)technology has emerged as an effective solution for energy insecurity and bioremediation.However,identifying suitable components(particularly separators or membranes)with the required properties,such as low cost and high performance,remains challenging and restricts practical application.Commercial membranes,such as Nafion,exhibit excellent performance in MFC.However,these membranes have high production costs,which considerably increase the overall MFC unit cell cost.Among the numerous types,the separators or membranes developed from biopolymers and naturally occurring earthen sources have proven to be a novel and efficient concept due to their natural abundance,cost-effectiveness(approximately$20 m^(-2),$5 m^(-2),and$1 kg-1for biopolymers,ceramics,and earthensources,respectively),structural properties,proton transportation,manufacturing and modification ease,and environmental friendliness.In this review,we emphasize cost-effective renewable green materials(biopolymers,bio-derived materials,and naturally occurring soil,clay,ceramics or minerals)for MFC applications for the first time.Biopolymers with good thermal,mechanical,and water retention properties,sustainability,and environmental friendliness,such as cellulose and chitosan,are typically preferred.Furthermore,the modification or introduction of various functional groups in biopolymers to enhance their functional properties and scale MFC power density is explored.Subsequently,separator/membrane development using various bio-sources(such as coconut shells,banana peels,chicken feathers,and tea waste ash)is described.Additionally,naturally occurring sources such as clay,montmorillonite,and soils(including red,black,rice-husk,and Kalporgan soil)for MFC were reviewed.In conclusion,the existing gap in MFC technology was filled by providing recommendations for future aspects based on the barriers in cost,environment,and characteristics.

Influence of Cathode Modification by Chitosan and Fe^(3+)on the Electrochemical Performance of Marine Sediment Microbial Fuel Cell

The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is very low in seawater.A CTS-Fe^(3+)modified cathode is prepared here by grafting chitosan(CTS)on a carbon fiber surface and then chelating Fe^(3+)through the coordination process.The electrochemical performance in seawater and the output power of the assembled MSMFCs are both studied.The results show that the exchange current densities of CTS and the CTS-Fe^(3+)group are 5.5 and 6.2 times higher than that of the blank group,respectively.The potential of the CTS-Fe^(3+)modified cathode increases by 138 mV.The output power of the fuel cell(613.0 mW m^(-2))assembled with CTS-Fe^(3+)is 54 times larger than that of the blank group(11.4 mW m^(-2))and the current output corresponding with the maximum power output also increases by 56 times.Due to the valence conversion between Fe^(3+)and Fe^(2+)on the modified cathode,the kinetic activity of the dissolved oxygen reduction is accelerated and the depolarization capability of the cathode is enhanced,resulting higher cell power.On the basis of this study,the new cathode materials will be encouraged to design with the complex of iron ion in natural seawater as the catalysis for oxygen reduction to improve the cell power in deep sea.

Study on Biological Pathway of Carbon Dioxide Methanation Based on Microbial Electrolysis Cell

Realization of CO_(2) resource utilization is the main development direction of CO_(2) reduction.The CO_(2) methana-tion technology based on microbial electrolysis cell(MEC)has the characteristics of ambient temperature and pressure,green and low-carbon,which meets the need of low-carbon energy transition.However,the lack of the system such as the change of applied voltage and the reactor amplification will affect the methane production efficiency.In this research,the efficiency of methane production with different applied voltages and different types of reactors was carried out.The results were concluded that the maximum methane production rate of the H-type two-chamber microbial electrolysis cells(MECs)at an applied voltage of 0.8 V was obtained to be 1.15 times higher than that of 0.5 V;under the same conditions of inoculated sludge,the reactor was amplified 2.5 times and the cumulative amount of methane production was 1.04 times higher than the original.This research can provide a theoretical basis and technical reference for the early industrial application of CO_(2) methanation tech-nology based on MEC.

Study on Influencing Factors of Methane Production Efficiency of Microbial Electrolytic Cell with CO_(2) as Carbon Source

Reducing CO_(2) to produce methane through microbial electrolytic cell(MEC)is one of the important methods of CO_(2) resource utilization.In view of the problem of low methanogenesis rate and weak CO_(2) conversion rate in the reduction process,theflowfield environment of the cathode chamber is changed by changing the upper gas cir-culation rate and the lower liquid circulation rate of the cathode chamber to explore the impact on the reactor startup and operation and products.The results showed that under certain conditions,the CO_(2) consumption and methane production rate could be increased by changing the upper gas recirculation rate alone,but the increase effect was not obvious,but the by-product hydrogen production decreased significantly.Changing the lower liquid circulation rate alone can effectively promote the growth of biofilm,and change the properties of biofilm at the later stage of the experiment,with the peak current density increased by 16%;The methanogenic rate decreased from the peak value of 0.561 to 0.3 mmol/d,and the CO_(2) consumption did not change signifi-cantly,which indicated that CO_(2) was converted into other organic substances instead of methane.The data after coupling the upper gas circulation rate with the lower liquid circulation rate is similar to that of only changing the lower liquid circulation rate,but changing the upper gas circulation rate can alleviate the decline of methane pro-duction rate caused by the change of biofilm properties,which not only improves the current density,but also increases the methane production rate by 0.05 mmol/d in the stable period.This study can provide theoretical and technical support for the industrial application scenario offlowfield regulation intervention of microbial elec-trolytic cell methanogenesis.

Electricity generation during wastewater treatment by a microbial fuel cell coupled with constructed wetland

A membrane-less constructed wetland microbial fuel cell （CW-MFC） is constructed and operated under continuous flow with a hydraulic retention time （HRT） of 2 d. Fed with glucose, the CW-MFC generates a stable current density of over 2 A/m3 with a resistor of 1 kΩ and has a chemical oxygen demand （COD） removal efficiency of more than 90% after the startup of 2 to 3 d. A series of systems with the electrode spacings of 10, 20, 30 and 40 cm are compared. It is found that the container with the electrode spacing of 20 cm gains the highest voltage of 560 mV, the highest power density of 0. 149 W/m 3, and the highest Coulombic efficiency of 0.313%. It also has the highest COD removal efficiency of 94. 9%. In addition, the dissolved oxygen （DO） concentrations are observed as the lowest level in the middle of all the CW-MFC reactors. The results show that the more COD is removed, the greater power is generated, and the relatively higher Coulombic efficiency will be achieved. The present study indicates that the CW-MFC process can be used as a cost-effective and environmentally friendly wastewater treatment with simultaneous power generation.

Optimization of microbial cell factories for astaxanthin production: Biosynthesis and regulations, engineering strategies and fermentation optimization strategies

The global market demand for natural astaxanthin is rapidly increasing owing to its safety,the potential health benefits,and the diverse applications in food and pharmaceutical industries.The major native producers of natural astaxanthin on industrial scale are the alga Haematococcus pluvialis and the yeast Xanthopyllomyces dendrorhous.However,the natural production via these native producers is facing challenges of limited yield and high cost of cultivation and extraction.Alternatively,astaxanthin production via metabolically engineered non-native microbial cell factories such as Escherichia coli,Saccharomyces cerevisiae and Yarrowia lipolytica is another promising strategy to overcome these limitations.In this review we summarize the recent scientific and biotechnological progresses on astaxanthin biosynthetic pathways,transcriptional regulations,the interrelation with lipid metabolism,engineering strategies as well as fermentation process control in major native and non-native astaxanthin producers.These progresses illuminate the prospects of producing astaxanthin by microbial cell factories on industrial scale.

Magnetically modified microbial cells:A new type of magnetic adsorbents

Microbial cells, either in free or immobilized form, can be used for the preconcentration or removal of metal ions, organic and inorganic xenobiotics or biologically active compounds. Magnetic modification of these cells enables to prepare magnetic adsorbents that can be easily manipulated in difficult-to-handle samples, such as suspensions, in the presence of external magnetic field. In this review, typical examples of magnetic modifications of microbial cells are presented, as well as their possible applications for the separation of organic xenobiotics and heavy metal ions.

Functional expression and regulation of eukaryotic cytochrome P450 enzymes in surrogate microbial cell factories

Cytochrome P450(CYP)enzymes play crucial roles during the evolution and diversification of ancestral monocel-lular eukaryotes into multicellular eukaryotic organisms due to their essential functionalities including catalysis of housekeeping biochemical reactions,synthesis of diverse metabolites,detoxification of xenobiotics,and con-tribution to environmental adaptation.Eukaryotic CYPs with versatile functionalities are undeniably regarded as promising biocatalysts with great potential for biotechnological,pharmaceutical and chemical industry applica-tions.Nevertheless,the modes of action and the challenges associated with these membrane-bound proteins have hampered the effective utilization of eukaryotic CYPs in a broader range.This review is focused on comprehen-sive and consolidated approaches to address the core challenges in heterologous expression of membrane-bound eukaryotic CYPs in different surrogate microbial cell factories,aiming to provide key insights for better studies and applications of diverse eukaryotic CYPs in the future.We also highlight the functional significance of the previously underrated cytochrome P450 reductases(CPRs)and provide a rational justification on the progression of CPR from auxiliary redox partner to function modulator in CYP catalysis.

A system combining microbial fuel cell with photobioreactor for continuous domestic wastewater treatment and bioelectricity generation

A coupled system consisting of an upflow membrane-less microbial fuel cell (upflow ML-MFC) and a photobioreactor was developed, and its effectiveness for continuous wastewater treatment and electricity production was evaluated. Wastewater was fed to the upflow ML-MFC to remove chemical oxygen demand (COD), phosphorus and nitrogen with simultaneous electricity generation. The effluent from the cathode compartment of the upflow ML-MFC was then continuously fed to an external photobioreactor for removing the remaining phosphorus and nitrogen using microalgae. Alone, the upflow ML-MFC produces a maximum power density of 481 mW/m 3 , and obtains 77.9% COD, 23.5% total phosphorus (TP) and 97.6% NH4+-N removals. When combined with the photobioreactor, the system achieves 99.3% TP and 99.0% NH4+-N total removal. These results show both the effectiveness and the potential application of the coupled system to continuously treat domestic wastewater and simultaneously generate electricity and biomass.

Electricity Generation Using Membrane-less Microbial Fuel Cell during Wastewater Treatment

An upflow mode membrane-less microbial fuel cell （ML-MFC） was designed for wastewater treatment. Granular graphite electrodes, which are flexible in size, were adopted in the ML-MFC. Microbes present in anaerobic activated sludge were used as the biocatalyst and artificial wastewater was tested as substrate. During the electrochemically active microbe enrichment stage, a stable power output of 536 mW.m-3 with reference to the anode volume was generated by the ML-MFC running in batch mode. The voltage output decreased from 203 mV to about 190 mV after the ML-MFC was changed from batch mode to normally continuous mode, indicating that planktonic electrochemically active bacterial strains in the ML-MFC may be carried away along with the effluent. Cyclic voltammograms showed that the attached microbes possessed higher bioelectrochemical activity than the planktonic microbes. Forced aeration to the cathode benefited the electricity generation obviously. Higher feeding rate and longer electrode distance both increased the electricity generation. The coulombic yield was not more than 20% throughout the study, which is lower than that of MFCs with membrane. It is proposed that dissolved oxygen diffused from the cathode to the anode may consume part of the substrate.

Melamine modified carbon felts anode with enhanced electrogenesis capacity toward microbial fuel cells

Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells (MFCs). Nitrogen doping is an effective way for the modification of traditional carbon materials. In this work, heat treatment and melamine were used to modify carbon felts to enhance electrogenesis capacity of MFCs. The modified carbon felts were characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscopy (AFM) and malvern zeta potentiometer. Results show that the maximum power densities under heat treatment increase from 276.1 to 423.4 mW/m(2) (700 degrees C) and 461.5 mW/m(2) (1200 degrees C) and further increase to 472.5 mW/m(2) (700 degrees C) and 515.4 mW/m(2) (1200 degrees C) with the co-carbonization modification of melamine. The heat treatment reduces the material resistivity, improves the zeta potential which is beneficial to microbial adsorption and electron transfer. The addition of melamine leads to the higher content of surface pyridinic and quaternary nitrogen and higher zeta potential. It is related to higher MFCs performance. Generally, the melamine modification at high temperature increases the feasibility of carbon felt as MFCs's anode materials. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Sustainable biochar as an electrocatalysts for the oxygen reduction reaction in microbial fuel cells

Microbial fuel cells(MFCs)have gained remarkable attention as a novel wastewater treatment that simultaneously generates electricity.The low activity of the oxygen reduction reaction(ORR)remains one of the most critical bottlenecks limiting the development of MFCs.To date,although research on biochar as an electrocatalyst in MFCs has made tremendous progress,further improvements are needed to make it economically practical.Recently,biochars have been considered to be ORR electrocatalysts with developmental potential.In this review,the ORR mechanism and the essential requirements of ORR catalysts in MFC applications are introduced.Moreover,the focus is to highlight the material selection,properties,and preparation of biochar electrocatalysts,as well as the evaluation and measurement of biochar electrodes.Additionally,in order to provide comprehensive information on the specific applications of biochars in the field of MFCs,their applications as electrocatalysts,are then discussed in detail,including the uses of nitrogen-doped biochar and other heteroatom-doped biochars as electrocatalysts,poisoning tests for biochar catalysts,and the cost estimation of biochar catalysts.Finally,profound insights into the current challenges and clear directions for future perspectives and research are concluded.