As the poor dispersion of oily collectors and the inferior hydrophobicity of the mineral surface, the lowrank coal has an unsatisfactory flotation performance when using traditional collectors. In this paper, an ionic...As the poor dispersion of oily collectors and the inferior hydrophobicity of the mineral surface, the lowrank coal has an unsatisfactory flotation performance when using traditional collectors. In this paper, an ionic liquid microemulsion was used as a collector to enhance its floatability. Flotation test results demonstrated the microemulsion collector exhibited a superior collecting ability. A satisfactory separation performance of 78.66% combustible material recovery was obtained with the microemulsion collector consumption of 6 kg/t, which was equivalent to the flotation performance of diesel at a dosage of25 kg/t. The dispersion behavior of the microemulsion collector was investigated using the CryogenicTransmission Electron Microscopy. The interaction mechanism of the microemulsion collector on enhancing the low-rank coal flotation was elucidated through the Zeta potential and contact angle measurements, the Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis.The microemulsion collector exhibited superior dispersibility, which was dispersed into positively charged oil droplets with an average size of 160.21 nm in the pulp. Furthermore, the nano-oil droplets could be more efficiently adsorbed on the low-rank coal surface through electrostatic attraction, resulting in the improvement of its hydrophobicity. Thus, the microemulsion collector shows great application potential in improving the flotation performance of low-rank coal.展开更多
Low-Tension-Foam(LTF)flooding is an emerging enhanced oil recovery technique for low-permeability carbonate reservoirs.Foam capacity is closely related to the salinity environment(or,equivalently,the phase behavior of...Low-Tension-Foam(LTF)flooding is an emerging enhanced oil recovery technique for low-permeability carbonate reservoirs.Foam capacity is closely related to the salinity environment(or,equivalently,the phase behavior of the oil/water/surfactant system).Therefore,the interactions between microemulsion and foam components are of primary importance in the LTF process.In this study,the phase behavior of an oil/water/surfactant system under equilibrium is analyzed,firstly by assuming perfect mixing.Meanwhile,the formation kinetics of microemulsion are monitored through a novel low-field NMR technique,which is able to provide quantitative assessment on the microemulsion evolution characteristics.Then,foam stability is examined in the absence and in the presence of Winsor-Ⅰ and Winsor-Ⅲ type microemulsions.It is revealed that foam stability depends on the oil solubilization(oil swollen micelle size).A decrease in the oil swollen micelle size and micellar structure effectiveness,in conjunction with an increasing salinity,leads to lower foam stability in the presence of a Winsor-Ⅲ type microemulsion.展开更多
Considering the characteristics of carbonate reservoirs in the Middle East,a low-viscosity microemulsion acid that can be prepared on site and has an appropriate retardation ability was developed.It was compared with ...Considering the characteristics of carbonate reservoirs in the Middle East,a low-viscosity microemulsion acid that can be prepared on site and has an appropriate retardation ability was developed.It was compared with four conventional acid systems(hydrochloric acid,gelled acid,emulsified acid and surfactant acid)through experiments of rotating disk,multistage acid fracturing and core flooding with CT scanning.The micro-etching characteristics and conductivity of fracture surfaces were clarified,and the variation of saturation field during water invasion and flowback of spent acid and the recovery of oil phase relative permeability were quantitatively evaluated.The study shows that the addition of negatively charged agent to the oil core of microemulsion acid can enhance its adsorption capacity on the limestone surface and significantly reduce the H+mass transfer rate.Moreover,the negatively charged oil core is immiscible with the Ca^(2+)salt,so that the microemulsion acid can keep an overall structure not be damaged by Ca^(2+)salt generated during reaction,with adjustable adsorption capacity and stable microemulsion structure.With high vertical permeability along the fracture walls,the microemulsion acid can penetrate into deep fracture wall to form network etching,which helps greatly improve the permeability of reservoirs around the fractures and keep a high conductivity under a high closure pressure.The spent microemulsion acid is miscible with crude oil to form microemulsion.The microemulsion,oil and water are in a nearly miscible state,with basically no water block and low flowback resistance,the flowback of spent acid and the relative permeability of oil are recovered to a high degree.展开更多
In this study, we show that the percutaneous absorption and brain distribution of tetramethylpyrazine(TMP) is enhanced when combined with borneol(BN) in a microemulsionbased transdermal therapeutic system(ME-TTS). The...In this study, we show that the percutaneous absorption and brain distribution of tetramethylpyrazine(TMP) is enhanced when combined with borneol(BN) in a microemulsionbased transdermal therapeutic system(ME-TTS). The formulation of the TMP and BN microemulsion(TEM-BN-ME) was optimized in skin permeation studies in vitro following a uniform experimental design. Male Sprague-Dawley rats were used for the in vivo pharmacokinetic and tissue distribution studies of TMP-BN-ME-TTS. In the pharmacokinetic study, the TMP-BN-ME-TTS treated rats had significantly higher( P < 0.05) C max and AUC of TMP than the TMP-ME-TTS treated rats, indicating that BN improves the rate and extent of TMP percutaneous absorption. In the tissue distribution study, the AUC of TMP in brain was significantly higher in the TMP-BN-ME-TTS group( P < 0.05), indicating that BN facilitates the distribution of TMP in brain. In summary, BN enhanced the percutaneous absorption and brain distribution of TMP in a microemulsion-based transdermal therapeutic system.展开更多
The fusion of the leaching and purification processes was realized by directly using microemulsion as the leaching agent.The bis-(2-ethyhexyl)phosphoric acid(DEHPA)/n-heptane/NaOH microemulsion system was established ...The fusion of the leaching and purification processes was realized by directly using microemulsion as the leaching agent.The bis-(2-ethyhexyl)phosphoric acid(DEHPA)/n-heptane/NaOH microemulsion system was established to directly leach vanadates from sodium-roasted vanadium slag.The effect of the leaching agent on the leaching efficiency was investigated,in addition to the molar ratio of H_(2)O/NaDEHP(W),DEHPA concentration,solid/liquid ratio,stirring time,and leaching temperature.In optimal situations,the vanadium leaching efficiency reaches 79.57%.The X-ray diffraction characterization of the leaching residue and the Raman spectrum of the microemulsion before and after leaching demonstrate the successful entry of vanadates from the sodium-roasted vanadium slag into the microemulsion.The proposed method successfully realizes the leaching and purification of vanadates in one step,thereby greatly reducing production costs and environmental pollution.It also offers a new way to achieve the green recovery of valuable metals from solid resources.展开更多
Bimetallic Fe-Mn nano catalysts supported on carbon nanotubes(CNTs) were prepared using microemulsion technique with water-to-surfactant ratios of 0.4-1.6. The nano catalysts were extensively characterized by differen...Bimetallic Fe-Mn nano catalysts supported on carbon nanotubes(CNTs) were prepared using microemulsion technique with water-to-surfactant ratios of 0.4-1.6. The nano catalysts were extensively characterized by different methods and their activity and selectivity in Fischer-Tropsch synthesis(FTS) have been assessed in a fixed-bed microreactor. The physicochemical properties and performance of the nanocatalysts were compared with the catalyst prepared by impregnation method. Very narrow particle size distribution has been produced by the microemulsion technique at relatively high loading of active metal. TEM images showed that small metal nano particles in the range of 3–7 nm were not only confined inside the CNTs but also located on the outer surface of the CNTs. Using microemulsion technique with water to surfactant ratio of0.4 decreased the average iron particle sizes to 5.1 nm. The reduction percentage and dispersion percentage were almost doubled. Activity and selectivity were found to be dependent on the catalyst preparation method and average iron particle size. CO conversion and FTS rate increased from 49.1% to 71.0% and 0.144 to 0.289 gHC/(gcat h), respectively. While the WGS rate decreased from 0.097 to 0.056 gCO2/(gcat h). C5+liquid hydrocarbons selectivity decreased slightly and olefins selectivity almost doubled.展开更多
Bimetallic cobalt-ruthenium nano catalysts supported on carbon nanotubes(CNTs)are prepared using microemultion technique with water-to-surfactant ratios of 0.5—1.5.The nano catalysts were extensively characterized by...Bimetallic cobalt-ruthenium nano catalysts supported on carbon nanotubes(CNTs)are prepared using microemultion technique with water-to-surfactant ratios of 0.5—1.5.The nano catalysts were extensively characterized by different methods and their activity and selectivity in Fischer-Tropsch synthesis(FTS)have been assessed in a fixed-bed microreactor.The physicochemical properties and performance of the nanocatalysts were compared with the catalyst prepared by impregnation method.Very narrow particle size distribution has been produced by the microemulsion technique at relatively high loadings of active metals(15 wt%Co and 1 wt%Ru).According to TEM images,small Co particles(2—7 nm)were mostly confined inside the CNTs.Comparing with the catalyst prepared by impregnation,the use of microemulsion technique with water to surfactant ratio of 0.5 decreased the average cobalt oxide particle size to 4.8 nm,the dispersion was almost doubled and the reduction increased by 28%.Activity and selectivity were found to be dependent on the catalyst preparation method and water-to-surfactant ratio(as well as cobalt particle sizes).CO conversion increased from 59.1%to 75.1%and the FTS rate increased from 0.291 to0.372 gHC/(gcath).C5+liquid hydrocarbons selectivity decreased from 92.4%to 87.6%.展开更多
Ultrafine γ-A12O3 particles are synthesized in Triton X- 10 0/n - hexanol/cycloh exan e/wat er water in o if(w/o )Inicroemulsion by mixing two separately prepared microemulsions containing Al(NO)3 and (Wb)ZCO, respec...Ultrafine γ-A12O3 particles are synthesized in Triton X- 10 0/n - hexanol/cycloh exan e/wat er water in o if(w/o )Inicroemulsion by mixing two separately prepared microemulsions containing Al(NO)3 and (Wb)ZCO, respectively.The ultrafine Al2O3 particles are characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD)and their size and distribution are measured. The effects of water, surfactallt and reactant concentrations on the particlesize and distribution are studied. The results show that the particle size and distribution can be changed by varying thepreparation conditions, and the size of the microemulsion droplets has a controlling effect on the size of the pafticles. A. possible mechanism of ultrafine particles (UFPs) prepared by microemulsions is proposed.展开更多
The aim of this study was to enhance the solubility and stability of Acacia concinna extract by loading in a microemulsion for topical application. Both physical appearance and biological activities of the extract-loa...The aim of this study was to enhance the solubility and stability of Acacia concinna extract by loading in a microemulsion for topical application. Both physical appearance and biological activities of the extract-loaded microemulsion were determined in comparison with the extract solution. Pseudoternary phase diagrams of three oil types including tea seed oil, grape seed oil, and sesame oil, together with polysorbate 85 or the mixture of polysorbate 85 and sorbitan oleate as surfactants, and absolute ethanol as a co-surfactant were constructed to optimize the microemulsion area. The selected microemulsion was then characterized for droplet size, polydispersity index, and viscosity. Tea seed oil exhibited the highest microemulsion area in the phase diagram because it had the highest unsaturated fatty acid content. The microemulsion composed of tea seed oil(5%), polysorbate 85(40%), ethanol(20%), and water(35%) exhibited Newtonian flow behavior with the droplet size and polydispersity index of 68.03 ± 1.09 nm and 0.44 ± 0.04, respectively. After 4% w/w of the extract was incorporated into the microemulsion, larger droplets size was observed(239.77 ± 12.69 nm)with a lower polydispersity index(0.37 ± 0.02). After storage in various conditions, both physical appearances and the stability of biological activity of the extract-loaded microemulsion were improved compared to the solution. Therefore, the A. concinna loaded microemulsion may be a promising carrier for further development into a topical formulation and clinical trials for pharmaceutical and cosmeceutical applications are also suggested.展开更多
Supercritical carbon dioxide microemulsions are great medium to combine two immiscible substances through forming nanoscale polar cores in nonpolar continuous phase with the help of proper surfactants. The properties ...Supercritical carbon dioxide microemulsions are great medium to combine two immiscible substances through forming nanoscale polar cores in nonpolar continuous phase with the help of proper surfactants. The properties of microemulsions could be significantly affected by their constituents and structures. In this work, molecular dynamics simulation was implemented to study supercritical carbon dioxide microemulsions containing ionic liquid [bmim][PF6] and water by adding surfactant Ls-36. Results showed that the above components could form spherical aggregates in CO2 bulk phase with [bmim][PF6] and some water as the inner core, surfactant headgroups and water as the intermediate shell, and surfactant tails as the outer shell. The microstructure information about the outer shell was further investigated by defining an angle between the surfactant tail and the normal direction of the aggregate outer surface, which ranged from 78° to 125°. The influence of the ionic liquid content on the size and structure of microemulsions was explored and the best molar ratio between the ionic liquid and surfactant was around 1.25 for getting maximum water solubility.展开更多
The oil-in-water microemulsion containing N-butyl maleimide(NBMI. M1) and styrene(St, M2) was prepared. The complexation properties of NBMI and St in microemulsion were investigated by means of 1H-NMR. With the pa...The oil-in-water microemulsion containing N-butyl maleimide(NBMI. M1) and styrene(St, M2) was prepared. The complexation properties of NBMI and St in microemulsion were investigated by means of 1H-NMR. With the participation of charge-transfer complex(CTC). four reactivity ratios and the relative reactivity of free monomers and CTC were obtained. The result was compared with that measured by Mayo-Lewis method.展开更多
An investigation of the structural conversion in microemulsion system of sodium dodecylsulfonate-butanol-heptane-water was carried out by cyclic voltammetry and conductivity techniques.
Microemulsion electrokinetic chromatography (MEEKC) was developed for the separation of hydrophobic neutral compounds. The effects of core phase and co-surfactant on the separations were investigated. Under the select...Microemulsion electrokinetic chromatography (MEEKC) was developed for the separation of hydrophobic neutral compounds. The effects of core phase and co-surfactant on the separations were investigated. Under the selected condition, good resolutions were obtained for the test mixtures. The separation efficiencies were higher than 105 theoretical plates per metre.展开更多
Dielectric measurements were performed on middle phase microemulsions composed of sodium dodecylsulfate (SDS), cetyltrimethylammonium bromide(CTAB), n-butanol, n-heptane and brine. Distinct and unique dielectric behav...Dielectric measurements were performed on middle phase microemulsions composed of sodium dodecylsulfate (SDS), cetyltrimethylammonium bromide(CTAB), n-butanol, n-heptane and brine. Distinct and unique dielectric behavior , with characteristic frequency dependence regularity on the salinity of the microemulsions, was observed in the low-frequency range from 10- 103Hz. It can be considered to be an interfacial polarization mechanism.展开更多
The purpose of this study was to quantify the effect of the fatty acid alkyl-chain length of a polyethylene glycol(PEG)glyceryl ester,which was used as a microemulsion oil component,on the partitioning of highly lipop...The purpose of this study was to quantify the effect of the fatty acid alkyl-chain length of a polyethylene glycol(PEG)glyceryl ester,which was used as a microemulsion oil component,on the partitioning of highly lipophilic compounds to the mesenteric lymph after oral administration.Oil blue N,a highly lipophilic anthraquinone derivative,was orally administered to lymph duct-cannulated and untreated rats in two kinds of different microemulsions.Gelucire®50/13 and Gelucire®44/14 were used as the oil component with long chain and medium chain fatty acid portions,respectively,of PEG glyceryl esters in microemulsions.The cumulative amount of oil blue N in lymph fluid was almost the same between the two microemulsions,although the transferred amount of oil component(triglyceride)in the lymph after administration of the Gelucire®50/13 microemulsion was significantly higher than that of the Gelucire®44/14 microemulsion.On the other hand,the solubility of oil blue N in Gelucire®44/14 was much higher than that in Gelucire®50/13.No significant differences were observed between microemulsions in the bioavailability of oil blue N.From these data,the partitioning of oil blue N to the lymph was calculated using a mathematical model,showing that the partitioning ratios of oil blue N to the lymph fluid were almost the same for both microemulsions.The solubility of oil blue N to the oil component of the microemulsions and the transfer of triglycerides to the lymph after administration of the microemulsions counteract each other,leading to similar partitioning ratios of oil blue N to the lymph.展开更多
The phase behavior for systems containing sodium bis (2-ethylhexyl sulfosuccinate) (AOT), with the cationic hydro-trope tetraethyl ammonium chloride (TEAC), in the presence of water and heptane were studied. Formulati...The phase behavior for systems containing sodium bis (2-ethylhexyl sulfosuccinate) (AOT), with the cationic hydro-trope tetraethyl ammonium chloride (TEAC), in the presence of water and heptane were studied. Formulations of mi-croemulsion for such systems and for systems containing the so called “extended surfactant” were carried out at different salt concentrations. Anisotropy was detected using cross polarizers and polarized microscopy. Ultralow interfacial tension for microemulsion was measured, first theoretically using the Chun-Huh equation, and then experimentally using spinning drop experiments. The presence of short chain hydrotropes (TEAC) was found to destabilize the liquid crystalline region, observed in the AOT/water/heptane phase diagram. Ultralow interfacial tensions were observed for microemulsions formulated with surfactant concentrations as low as 0.5%, for both AOT and “extended surfactant” systems. The effect of temperature on the phase behavior of a microemulsion formed with AOT system was studied and found to behave in an opposite manner compared to the nonionic surfactant.展开更多
Nano-sized titania powders have been prepared by hydrolysis of tetrabutyl titanate in the droplet of water/OP-7/pentanol/cyclohexane microemulsion system.The effects of ingredient change on the water drop size and par...Nano-sized titania powders have been prepared by hydrolysis of tetrabutyl titanate in the droplet of water/OP-7/pentanol/cyclohexane microemulsion system.The effects of ingredient change on the water drop size and particle size were investigated.The prepared TiO_2 was in the form of anatase after annealing.TiO_2 was characterized by TG-TGA, FTIR,XRD to measure the transformation temperature,surface adsorption and average size.展开更多
Micellar and microemulsion electrokinetic chromatography (MEKC & MEEKC) separation of six closely structural pyridoncarboylxic acid derivatives were studied and compared. Both anionic surfactant sodium dodecyl sul...Micellar and microemulsion electrokinetic chromatography (MEKC & MEEKC) separation of six closely structural pyridoncarboylxic acid derivatives were studied and compared. Both anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant hexadecyl-trimethyl ammonium bromide (CTAB) were used to form micellar and microemulsion as pseudostation phases, respectively. The effects of the separation conditions on retention time and selectivity were studied. Good resolutions were obtained in selected systems, indicating that there is markably different selectivity between SDS and CTAB systems.展开更多
Background:Crossbow medicine needle is a traditional external therapy.However,acupuncture pain,inaccurate administration,secondary infection,and poor patient compliance limit the application of specialty therapies.Sin...Background:Crossbow medicine needle is a traditional external therapy.However,acupuncture pain,inaccurate administration,secondary infection,and poor patient compliance limit the application of specialty therapies.Since the most effective components of crossbow medicine are lipid-soluble,the crossbow medicine needle was prepared as an innovative O/W-type microemulsion to solve these problems.In this study,the crossbow medicine microemulsion preparation method was established and its quality was evaluated.Methods:A single factor and pseudoternary phase diagram,combined with a D-optimal mixture design,optimized the formulation of crossbow medicine microemulsion through particle size,polydispersity index,zeta potential,microstructure,and contents of benzoyl neoaconitine,benzoyl hypoaconitine,neoaconitine,periplocin,and methyl salicylate to evaluate the final prescription.Results:The best prescription for preparing crossbow medicine microemulsion is 0.1500 g crossbow medicine dry extract,0.1500 g isopropyl myristate,0.8625 g polyoxyethylene castor oil-35,0.2875 g ethanol,3.700 g water,and 5.1500 g microemulsion.The prepared microemulsion is an oil-in-water type with a clear and transparent appearance.Its average particle size is 19.83±0.78 nm,average polydispersity index is 0.15±0.02,and average zeta potential is−0.51±0.1 mV.The pH value is 5.17±0.02.The microstructure of crossbow medicine microemulsion illustrated a uniform distribution of spherical oil globules.The average contents of benzoyl neoaconitine,benzoyl hypoaconitine,neoaconitine,periplocin,and methyl salicylate were 13.34,113.05,43.45,628.27 and 27.93μg/g,respectively.Conclusion:The preparation process of crossbow medicine microemulsion is reasonable and feasible.The method to determine the content is accurate and straightforward,laying the foundation for further research.展开更多
Interfacial properties rhamnolipids from an extract produced by a strain of Pseudomonas aeruginosa were analyzed in this study. The extract of rhamnolipid was characterized by surface tension in different conditions;i...Interfacial properties rhamnolipids from an extract produced by a strain of Pseudomonas aeruginosa were analyzed in this study. The extract of rhamnolipid was characterized by surface tension in different conditions;interfacial tension with different hydrocarbons;critical micelle concentration under different pH and temperatures;particle size and emulsification capacity using laser light profiling. It was observed that the rhamnolipids extract are sensitive to variations in pH, thermostable and function as good emulsificant for emulsification of methyl methacrylate. The emulsion stability order in function of the oil phase was methyl methacrylate > emulsions of castor oil > emulsion n-heptane > emulsion toluene > emulsion hexadecane > octane emulsion. The data presented show that rhamnolipid extracts may be used to formulate stable emulsions of methyl methacrylate. This process can be used to do nano/microsphere of polymethyl methacrylate.展开更多
基金financially supported by the National Key Research and Development Program of China (No. 2020YFC1908801)the National Natural Science Foundation of China (No. 52204287)+1 种基金the National Natural Science Foundation of China (No. 52004250)the Key R&D and Promotion Projects in Henan Province (No. 212102310009)。
文摘As the poor dispersion of oily collectors and the inferior hydrophobicity of the mineral surface, the lowrank coal has an unsatisfactory flotation performance when using traditional collectors. In this paper, an ionic liquid microemulsion was used as a collector to enhance its floatability. Flotation test results demonstrated the microemulsion collector exhibited a superior collecting ability. A satisfactory separation performance of 78.66% combustible material recovery was obtained with the microemulsion collector consumption of 6 kg/t, which was equivalent to the flotation performance of diesel at a dosage of25 kg/t. The dispersion behavior of the microemulsion collector was investigated using the CryogenicTransmission Electron Microscopy. The interaction mechanism of the microemulsion collector on enhancing the low-rank coal flotation was elucidated through the Zeta potential and contact angle measurements, the Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis.The microemulsion collector exhibited superior dispersibility, which was dispersed into positively charged oil droplets with an average size of 160.21 nm in the pulp. Furthermore, the nano-oil droplets could be more efficiently adsorbed on the low-rank coal surface through electrostatic attraction, resulting in the improvement of its hydrophobicity. Thus, the microemulsion collector shows great application potential in improving the flotation performance of low-rank coal.
文摘Low-Tension-Foam(LTF)flooding is an emerging enhanced oil recovery technique for low-permeability carbonate reservoirs.Foam capacity is closely related to the salinity environment(or,equivalently,the phase behavior of the oil/water/surfactant system).Therefore,the interactions between microemulsion and foam components are of primary importance in the LTF process.In this study,the phase behavior of an oil/water/surfactant system under equilibrium is analyzed,firstly by assuming perfect mixing.Meanwhile,the formation kinetics of microemulsion are monitored through a novel low-field NMR technique,which is able to provide quantitative assessment on the microemulsion evolution characteristics.Then,foam stability is examined in the absence and in the presence of Winsor-Ⅰ and Winsor-Ⅲ type microemulsions.It is revealed that foam stability depends on the oil solubilization(oil swollen micelle size).A decrease in the oil swollen micelle size and micellar structure effectiveness,in conjunction with an increasing salinity,leads to lower foam stability in the presence of a Winsor-Ⅲ type microemulsion.
基金Supported by the National Science and Technology Major Project(2017ZX05009-005-003)National Natural Science Foundation of China Funded General Project(52174045)+1 种基金Chinese Academy of Engineering Strategic Consulting Project(2018-XZ-09)China National Petroleum Corporation-China University of Petroleum(Beijing)Strategic Cooperation Science and Technology Project(ZLZX2020-01).
文摘Considering the characteristics of carbonate reservoirs in the Middle East,a low-viscosity microemulsion acid that can be prepared on site and has an appropriate retardation ability was developed.It was compared with four conventional acid systems(hydrochloric acid,gelled acid,emulsified acid and surfactant acid)through experiments of rotating disk,multistage acid fracturing and core flooding with CT scanning.The micro-etching characteristics and conductivity of fracture surfaces were clarified,and the variation of saturation field during water invasion and flowback of spent acid and the recovery of oil phase relative permeability were quantitatively evaluated.The study shows that the addition of negatively charged agent to the oil core of microemulsion acid can enhance its adsorption capacity on the limestone surface and significantly reduce the H+mass transfer rate.Moreover,the negatively charged oil core is immiscible with the Ca^(2+)salt,so that the microemulsion acid can keep an overall structure not be damaged by Ca^(2+)salt generated during reaction,with adjustable adsorption capacity and stable microemulsion structure.With high vertical permeability along the fracture walls,the microemulsion acid can penetrate into deep fracture wall to form network etching,which helps greatly improve the permeability of reservoirs around the fractures and keep a high conductivity under a high closure pressure.The spent microemulsion acid is miscible with crude oil to form microemulsion.The microemulsion,oil and water are in a nearly miscible state,with basically no water block and low flowback resistance,the flowback of spent acid and the relative permeability of oil are recovered to a high degree.
基金supported by the Program from Shanghai Uni-versity of Traditional Chinese Medicine(B201725)
文摘In this study, we show that the percutaneous absorption and brain distribution of tetramethylpyrazine(TMP) is enhanced when combined with borneol(BN) in a microemulsionbased transdermal therapeutic system(ME-TTS). The formulation of the TMP and BN microemulsion(TEM-BN-ME) was optimized in skin permeation studies in vitro following a uniform experimental design. Male Sprague-Dawley rats were used for the in vivo pharmacokinetic and tissue distribution studies of TMP-BN-ME-TTS. In the pharmacokinetic study, the TMP-BN-ME-TTS treated rats had significantly higher( P < 0.05) C max and AUC of TMP than the TMP-ME-TTS treated rats, indicating that BN improves the rate and extent of TMP percutaneous absorption. In the tissue distribution study, the AUC of TMP in brain was significantly higher in the TMP-BN-ME-TTS group( P < 0.05), indicating that BN facilitates the distribution of TMP in brain. In summary, BN enhanced the percutaneous absorption and brain distribution of TMP in a microemulsion-based transdermal therapeutic system.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51474041 and 51674051)Chongqing Science and Technology Bureau(No.cstc2019jcyjjqX0006)Chongqing Talents Plan for Young Talents(No.CQYC201905050).
文摘The fusion of the leaching and purification processes was realized by directly using microemulsion as the leaching agent.The bis-(2-ethyhexyl)phosphoric acid(DEHPA)/n-heptane/NaOH microemulsion system was established to directly leach vanadates from sodium-roasted vanadium slag.The effect of the leaching agent on the leaching efficiency was investigated,in addition to the molar ratio of H_(2)O/NaDEHP(W),DEHPA concentration,solid/liquid ratio,stirring time,and leaching temperature.In optimal situations,the vanadium leaching efficiency reaches 79.57%.The X-ray diffraction characterization of the leaching residue and the Raman spectrum of the microemulsion before and after leaching demonstrate the successful entry of vanadates from the sodium-roasted vanadium slag into the microemulsion.The proposed method successfully realizes the leaching and purification of vanadates in one step,thereby greatly reducing production costs and environmental pollution.It also offers a new way to achieve the green recovery of valuable metals from solid resources.
文摘Bimetallic Fe-Mn nano catalysts supported on carbon nanotubes(CNTs) were prepared using microemulsion technique with water-to-surfactant ratios of 0.4-1.6. The nano catalysts were extensively characterized by different methods and their activity and selectivity in Fischer-Tropsch synthesis(FTS) have been assessed in a fixed-bed microreactor. The physicochemical properties and performance of the nanocatalysts were compared with the catalyst prepared by impregnation method. Very narrow particle size distribution has been produced by the microemulsion technique at relatively high loading of active metal. TEM images showed that small metal nano particles in the range of 3–7 nm were not only confined inside the CNTs but also located on the outer surface of the CNTs. Using microemulsion technique with water to surfactant ratio of0.4 decreased the average iron particle sizes to 5.1 nm. The reduction percentage and dispersion percentage were almost doubled. Activity and selectivity were found to be dependent on the catalyst preparation method and average iron particle size. CO conversion and FTS rate increased from 49.1% to 71.0% and 0.144 to 0.289 gHC/(gcat h), respectively. While the WGS rate decreased from 0.097 to 0.056 gCO2/(gcat h). C5+liquid hydrocarbons selectivity decreased slightly and olefins selectivity almost doubled.
文摘Bimetallic cobalt-ruthenium nano catalysts supported on carbon nanotubes(CNTs)are prepared using microemultion technique with water-to-surfactant ratios of 0.5—1.5.The nano catalysts were extensively characterized by different methods and their activity and selectivity in Fischer-Tropsch synthesis(FTS)have been assessed in a fixed-bed microreactor.The physicochemical properties and performance of the nanocatalysts were compared with the catalyst prepared by impregnation method.Very narrow particle size distribution has been produced by the microemulsion technique at relatively high loadings of active metals(15 wt%Co and 1 wt%Ru).According to TEM images,small Co particles(2—7 nm)were mostly confined inside the CNTs.Comparing with the catalyst prepared by impregnation,the use of microemulsion technique with water to surfactant ratio of 0.5 decreased the average cobalt oxide particle size to 4.8 nm,the dispersion was almost doubled and the reduction increased by 28%.Activity and selectivity were found to be dependent on the catalyst preparation method and water-to-surfactant ratio(as well as cobalt particle sizes).CO conversion increased from 59.1%to 75.1%and the FTS rate increased from 0.291 to0.372 gHC/(gcath).C5+liquid hydrocarbons selectivity decreased from 92.4%to 87.6%.
文摘Ultrafine γ-A12O3 particles are synthesized in Triton X- 10 0/n - hexanol/cycloh exan e/wat er water in o if(w/o )Inicroemulsion by mixing two separately prepared microemulsions containing Al(NO)3 and (Wb)ZCO, respectively.The ultrafine Al2O3 particles are characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD)and their size and distribution are measured. The effects of water, surfactallt and reactant concentrations on the particlesize and distribution are studied. The results show that the particle size and distribution can be changed by varying thepreparation conditions, and the size of the microemulsion droplets has a controlling effect on the size of the pafticles. A. possible mechanism of ultrafine particles (UFPs) prepared by microemulsions is proposed.
基金supported by Agricultural Research Development Agency (public organization)ARDA [grant number CRP5705011620]
文摘The aim of this study was to enhance the solubility and stability of Acacia concinna extract by loading in a microemulsion for topical application. Both physical appearance and biological activities of the extract-loaded microemulsion were determined in comparison with the extract solution. Pseudoternary phase diagrams of three oil types including tea seed oil, grape seed oil, and sesame oil, together with polysorbate 85 or the mixture of polysorbate 85 and sorbitan oleate as surfactants, and absolute ethanol as a co-surfactant were constructed to optimize the microemulsion area. The selected microemulsion was then characterized for droplet size, polydispersity index, and viscosity. Tea seed oil exhibited the highest microemulsion area in the phase diagram because it had the highest unsaturated fatty acid content. The microemulsion composed of tea seed oil(5%), polysorbate 85(40%), ethanol(20%), and water(35%) exhibited Newtonian flow behavior with the droplet size and polydispersity index of 68.03 ± 1.09 nm and 0.44 ± 0.04, respectively. After 4% w/w of the extract was incorporated into the microemulsion, larger droplets size was observed(239.77 ± 12.69 nm)with a lower polydispersity index(0.37 ± 0.02). After storage in various conditions, both physical appearances and the stability of biological activity of the extract-loaded microemulsion were improved compared to the solution. Therefore, the A. concinna loaded microemulsion may be a promising carrier for further development into a topical formulation and clinical trials for pharmaceutical and cosmeceutical applications are also suggested.
基金Supported by the National Natural Science Foundation of China(21376045,21506027)Petrochemicals Joint Fund of National Natural Science Foundation of ChinaChina National Petroleum Corporation(U1662130).
文摘Supercritical carbon dioxide microemulsions are great medium to combine two immiscible substances through forming nanoscale polar cores in nonpolar continuous phase with the help of proper surfactants. The properties of microemulsions could be significantly affected by their constituents and structures. In this work, molecular dynamics simulation was implemented to study supercritical carbon dioxide microemulsions containing ionic liquid [bmim][PF6] and water by adding surfactant Ls-36. Results showed that the above components could form spherical aggregates in CO2 bulk phase with [bmim][PF6] and some water as the inner core, surfactant headgroups and water as the intermediate shell, and surfactant tails as the outer shell. The microstructure information about the outer shell was further investigated by defining an angle between the surfactant tail and the normal direction of the aggregate outer surface, which ranged from 78° to 125°. The influence of the ionic liquid content on the size and structure of microemulsions was explored and the best molar ratio between the ionic liquid and surfactant was around 1.25 for getting maximum water solubility.
文摘The oil-in-water microemulsion containing N-butyl maleimide(NBMI. M1) and styrene(St, M2) was prepared. The complexation properties of NBMI and St in microemulsion were investigated by means of 1H-NMR. With the participation of charge-transfer complex(CTC). four reactivity ratios and the relative reactivity of free monomers and CTC were obtained. The result was compared with that measured by Mayo-Lewis method.
基金the Natural Science Foundation ofjiangxi province.
文摘An investigation of the structural conversion in microemulsion system of sodium dodecylsulfonate-butanol-heptane-water was carried out by cyclic voltammetry and conductivity techniques.
文摘Microemulsion electrokinetic chromatography (MEEKC) was developed for the separation of hydrophobic neutral compounds. The effects of core phase and co-surfactant on the separations were investigated. Under the selected condition, good resolutions were obtained for the test mixtures. The separation efficiencies were higher than 105 theoretical plates per metre.
文摘Dielectric measurements were performed on middle phase microemulsions composed of sodium dodecylsulfate (SDS), cetyltrimethylammonium bromide(CTAB), n-butanol, n-heptane and brine. Distinct and unique dielectric behavior , with characteristic frequency dependence regularity on the salinity of the microemulsions, was observed in the low-frequency range from 10- 103Hz. It can be considered to be an interfacial polarization mechanism.
文摘The purpose of this study was to quantify the effect of the fatty acid alkyl-chain length of a polyethylene glycol(PEG)glyceryl ester,which was used as a microemulsion oil component,on the partitioning of highly lipophilic compounds to the mesenteric lymph after oral administration.Oil blue N,a highly lipophilic anthraquinone derivative,was orally administered to lymph duct-cannulated and untreated rats in two kinds of different microemulsions.Gelucire®50/13 and Gelucire®44/14 were used as the oil component with long chain and medium chain fatty acid portions,respectively,of PEG glyceryl esters in microemulsions.The cumulative amount of oil blue N in lymph fluid was almost the same between the two microemulsions,although the transferred amount of oil component(triglyceride)in the lymph after administration of the Gelucire®50/13 microemulsion was significantly higher than that of the Gelucire®44/14 microemulsion.On the other hand,the solubility of oil blue N in Gelucire®44/14 was much higher than that in Gelucire®50/13.No significant differences were observed between microemulsions in the bioavailability of oil blue N.From these data,the partitioning of oil blue N to the lymph was calculated using a mathematical model,showing that the partitioning ratios of oil blue N to the lymph fluid were almost the same for both microemulsions.The solubility of oil blue N to the oil component of the microemulsions and the transfer of triglycerides to the lymph after administration of the microemulsions counteract each other,leading to similar partitioning ratios of oil blue N to the lymph.
文摘The phase behavior for systems containing sodium bis (2-ethylhexyl sulfosuccinate) (AOT), with the cationic hydro-trope tetraethyl ammonium chloride (TEAC), in the presence of water and heptane were studied. Formulations of mi-croemulsion for such systems and for systems containing the so called “extended surfactant” were carried out at different salt concentrations. Anisotropy was detected using cross polarizers and polarized microscopy. Ultralow interfacial tension for microemulsion was measured, first theoretically using the Chun-Huh equation, and then experimentally using spinning drop experiments. The presence of short chain hydrotropes (TEAC) was found to destabilize the liquid crystalline region, observed in the AOT/water/heptane phase diagram. Ultralow interfacial tensions were observed for microemulsions formulated with surfactant concentrations as low as 0.5%, for both AOT and “extended surfactant” systems. The effect of temperature on the phase behavior of a microemulsion formed with AOT system was studied and found to behave in an opposite manner compared to the nonionic surfactant.
文摘Nano-sized titania powders have been prepared by hydrolysis of tetrabutyl titanate in the droplet of water/OP-7/pentanol/cyclohexane microemulsion system.The effects of ingredient change on the water drop size and particle size were investigated.The prepared TiO_2 was in the form of anatase after annealing.TiO_2 was characterized by TG-TGA, FTIR,XRD to measure the transformation temperature,surface adsorption and average size.
基金the National Natural Science Foundation of China.
文摘Micellar and microemulsion electrokinetic chromatography (MEKC & MEEKC) separation of six closely structural pyridoncarboylxic acid derivatives were studied and compared. Both anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant hexadecyl-trimethyl ammonium bromide (CTAB) were used to form micellar and microemulsion as pseudostation phases, respectively. The effects of the separation conditions on retention time and selectivity were studied. Good resolutions were obtained in selected systems, indicating that there is markably different selectivity between SDS and CTAB systems.
基金This work was supported by the Projects from Guiyang University of Traditional Chinese Medicine(No.(2017)5735-27)National Engineering Research Center of Miao’s Medicines(No.2014FU125Q09)Science and Technology Department of Guizhou Province(No.GNYL(2017)008,No.(2015)4030,No.(2017)5655,and No.YJSCXJH(2020)157).
文摘Background:Crossbow medicine needle is a traditional external therapy.However,acupuncture pain,inaccurate administration,secondary infection,and poor patient compliance limit the application of specialty therapies.Since the most effective components of crossbow medicine are lipid-soluble,the crossbow medicine needle was prepared as an innovative O/W-type microemulsion to solve these problems.In this study,the crossbow medicine microemulsion preparation method was established and its quality was evaluated.Methods:A single factor and pseudoternary phase diagram,combined with a D-optimal mixture design,optimized the formulation of crossbow medicine microemulsion through particle size,polydispersity index,zeta potential,microstructure,and contents of benzoyl neoaconitine,benzoyl hypoaconitine,neoaconitine,periplocin,and methyl salicylate to evaluate the final prescription.Results:The best prescription for preparing crossbow medicine microemulsion is 0.1500 g crossbow medicine dry extract,0.1500 g isopropyl myristate,0.8625 g polyoxyethylene castor oil-35,0.2875 g ethanol,3.700 g water,and 5.1500 g microemulsion.The prepared microemulsion is an oil-in-water type with a clear and transparent appearance.Its average particle size is 19.83±0.78 nm,average polydispersity index is 0.15±0.02,and average zeta potential is−0.51±0.1 mV.The pH value is 5.17±0.02.The microstructure of crossbow medicine microemulsion illustrated a uniform distribution of spherical oil globules.The average contents of benzoyl neoaconitine,benzoyl hypoaconitine,neoaconitine,periplocin,and methyl salicylate were 13.34,113.05,43.45,628.27 and 27.93μg/g,respectively.Conclusion:The preparation process of crossbow medicine microemulsion is reasonable and feasible.The method to determine the content is accurate and straightforward,laying the foundation for further research.
文摘Interfacial properties rhamnolipids from an extract produced by a strain of Pseudomonas aeruginosa were analyzed in this study. The extract of rhamnolipid was characterized by surface tension in different conditions;interfacial tension with different hydrocarbons;critical micelle concentration under different pH and temperatures;particle size and emulsification capacity using laser light profiling. It was observed that the rhamnolipids extract are sensitive to variations in pH, thermostable and function as good emulsificant for emulsification of methyl methacrylate. The emulsion stability order in function of the oil phase was methyl methacrylate > emulsions of castor oil > emulsion n-heptane > emulsion toluene > emulsion hexadecane > octane emulsion. The data presented show that rhamnolipid extracts may be used to formulate stable emulsions of methyl methacrylate. This process can be used to do nano/microsphere of polymethyl methacrylate.