Efficient Preparation and Electrochemical Properties of BiOCl/Graphite by One-step Solvothermal Method

We used the surface-pretreated graphite paper(Gp)as a carrier and loaded BiOCl with high selectivity to Cl^(-)on its surface by solvothermal method to form BiOCl@Gp electrode.The morphology,structure,and composition of the materials were characterized by scanning electron microscopy and nitrogen adsorption/desorption,and the results showed that the spherical BiOCl particles were uniformly dispersed on the surface of the Gp,forming a mesoporous BiOCl@Gp composite with a specific surface area of 22.82 m^(2)/g and a pore volume of 0.043 cm3/g.Furthermore,cyclic voltammetry and electrochemical impedance spectroscopy were used to test the electrochemical properties of the composites,and the stability of BiOCl and the high conductivity of Gp were synergistic,the BiOCl@Gp exhibited a specific capacitance of 30.2 F·g^(-1) at a current density of 0.5 A·g^(-1),and the selectivity of the BiOCl@Gp materials for Cl^(-)was significantly higher than that of SO_(4)^(2-),NO_(2)^(-),and HCO_(3)^(-).Therefore,BiOCl@Gp composite electrode materials can be used for the selective adsorption of Cl^(-)in wastewater,in order to achieve efficient wastewater recycling.

Efficient Solvothermal Synthesis of Defect-Rich Cu-BTC•MOF with Enhanced Electrocatalytic Activity in Alkaline Hydrogen Evolution Reaction

Porous metal–organic frameworks(MOFs) have been recently discovered to be efficient catalysts for energy applications and green technologies. Here, we report on a scalable catalytic platform using Cu–based MOFs for electrocatalytic alkaline hydrogen evolution reaction. First, the solvothermal synthesis of Cu–BTC MOFs(BTC = 1,3,5–benzenetricarboxylate) at 85 ℃ and a 1:60 ligand–to–solvent ratio allowed for minimizing the chemical consumption. Second, the obtained platform demonstrated enhanced electrochemical performance compared with commercially available Cu–based MOFs, with a potential of –230 versus –232 eV, logarithm of the current density of –3.6 versus –4.2 cm2, and electrochemical surface area of 75 versus 25 cm2per cm2of geometric area, respectively. Morphological and Raman analyses also revealed that the high concentration of defects in the obtained submicron Cu–BTC MOFs can contribute to their improved catalytic performance. Thus, our findings pave the way to the low–cost synthesis of energy–efficient MOF–based catalysts for hydrogen production.

Solvothermal synthesis and adsorption performance of layered boehmite using aluminum chloride and high-alumina fly ash

High alumina fly ash(FAHAl)is a kind of bulk solid waste unique to China,whose availability of high-value aluminum and the threat to the environment makes its high-value utilization urgent.In this work,the alumina containing leaching solution obtained from Na_(2)CO_(3) roasting and HCl leaching of FAHAl was used as the mother liquor to prepare layered boehmite in situ.The preparation process with AlCl_(3) as the raw material was also compared.The formation process and mechanism of boehmite,the choice of solvent,along with the adsorption capability of Congo red were analyzed by X-ray diffraction,scanning electron microscopy,Fourier transform infrared spectroscopy,Brunauer-Emmett-Teller method and adsorption experiments.Results showed that during the preparation of layered boehmite,the precursor Al(OH)_(3) from the reaction of Al^(3+) and OH-is transformed into boehmiteγ-AlOOH.The existence of ethanol is beneficial to regulate and promote the growth of boehmite crystal effectively.When water and ethanol are mixed with a volume ratio of 2:1 and used as the solvent,the maximum specific surface area of the boehmite is obtained at 135.7 m^(2)·g^(-1),and 99.16%of Congo red can be absorbed after 10 min when AlCl3 is used as a raw material.As purified leaching solution is used as the mother liquid,the crystallinity of boehmite decreases slightly when the pH value decreases from 12.5 to 11.When pH is 11,the removal efficiency of Congo red reaches a maximum of 72.25%.This process not only achieves the extraction of aluminum and high-value utilization of FAHAl but also provides a thought to prepare layered boehmite with adsorption properties.

Framework-solvent interactional mechanism and effect of NMP/DMF on solvothermal synthesis of [Zn_4O(BDC)_3]_8

In order to explore the effect mechanism of solvent on the synthesis of the metal organic framework materials, the microscopic interaction between solvent and framework and the effects of N,N-dimethyl-formamide(DMF) or N-methyl- 2-pyrrolidone(NMP) on solvothermal synthesis of [Zn4O(BDC)3]8 were investigated through a combined DFT and experimental study. XRD and SEM showed that the absorbability of NMP in the pore of [Zn4O(BDC)3]8 was weaker than that of DMF. The thermal decomposition temperature of [Zn4O(BDC)3]8 synthesized in DMF was higher than that in NMP according to TG and FT-IR. In addition, the nitrogen sorption isotherms indicated that NMP improved gas sorption property of [Zn4O(BDC)3]8. The COSMO optimized calculations indicated that the total energy of Zn4O(BDC)3 in NMP was higher than that in DMF, and compared with non-solvent system, the charge of zinc atoms decreased and the charge value was the smallest in NMP. Furthermore, the interaction of DMF, NMP or DEF in [Zn4O(BDC)3]8 crystal model was calculated by DFT method. The results suggested that NMP should be easier to be removed from pore of materials than DMF from the point of view of energy state. It can be concluded that NMP was a favorable solvent to synthesize [Zn4O(BDC)3]8 and the microscopic mechanism was that the binding force between Zn4O(BDC)3 and NMP molecule was weaker than DMF.

Synthesis of Yttrium Oxide Nanocrystal via Solvothermal Process

Y2O3 nanomaterials have been widely used in transparent ceramics and luminescent devices. Recently there are many studies focusing on controlling the size and morphology of Y2O3 in order to obtain better materials performance. In present study, yttrium oxyhydroxide precursor was synthesized via a facile solvothermal process through the dissolution-re-crystallization mechanism of Y2O3 raw powders in the ethylenediamine solvent, then nanosized yttrium oxide crystal was prepared from the precursor through post heat treatment process. The effects of solvothermal treatment temperature, holding time, solvent kinds and post heat treatment parameters on crystalline structure, grain shape and size of nanocrystal were investigated by XRD, TEM and TGA-DTA measurements. TEM images reveal that the morphology of product after post heat treatment at 460℃for 12 h is rice-like nanocrystal. XRD shows that this product is pure cubic Y2O3 cphase. Present study reveals that high purity Y2O3 with rice-like morphology can be easily prepared with average size around 30 nm under suitable post heat treatment parameters. In addition, the effects of solvents such as water and ethanol etc. on the crystal structure and morphology were also investigated. It is suggested that dissolution-recrystallization process may be the main mechanism for the formation of nano-sized YOOH precursors under solvothermal reaction condition, and the ethylenediamine solvent is likely to play an important role in controlling the transformation process of yttria precursors to the Y2O3 nanocrystal.

Solvothermal Synthesis and Characterization of HgTe Nanoplatelets Using Mercury(I) Source

Mercury telluride （HgTe） nanoplatelets were obtained via a facile solvothermal reaction of mercury（I） chloride and tellurium powder in ethylenediamine （en）. Mercury（I） was first applied as the mercury sources to prepare nanocrystal HgTe; moreover, the proposed mechanism for the fabrication of the sample was discussed in detail. The HgTe nanoplatelets were characterized by powder X-ray diffraction （PXRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, high-resolution transmission electron microscopy （HRTEM） and Fourier transform infrared spectroscopy （FT-IR）. The absence of IR absorption may render the title nanocrystal useful as an IR transparent material in the region.

Layered double hydroxide nanosheets via solvothermal delamination

A new solvothermal post-synthesis treatment for preparing high aspect ratio magnesium aluminium layered double hydroxides(Mg Al–LDHs) has been developed. Treating laurate-intercalated Mg Al–LDHs in pure ethanol in an autoclave for 48 h at 150 °C was found to produce delaminated MgA l–LDH nanosheets with a thickness of ~2.6 nm and an aspect ratio of ~105. It is proposed that the high pressure solvothermal process promotes the insertion of ethanol molecules into the LDH interlayer space, thereby facilitating delamination. This new post-synthesis treatment provides the opportunity for a facile, large scale route to highly delaminated high aspect ratio LDHs, which might be of interest towards novel nanomaterials for energy conversion and storage.

Solvothermal Syntheses, Crystal Structures, Thermal Stability and Quantum Chemistry of Dinuclear Trialkyltin Complexes Constructed by Camphoric Acid

Two dinuclear organotin complexes C8H14（CO2SnCy3）2（1）（Cy = cyclohexyl group） and C8H14[CO2Sn（CH2CMe2Ph）3]2（2） were synthesized by the reactions of camphoric acid with tricyclohexyltin hydroxide and bis[tri（2-methyl-2-phenyl）propyltin] oxide under solvothermal conditions, and these complexes were characterized by infrared spectra, elemental analyses, and H NMR spectra. The crystal of 1 belongs to the monoclinic system, space group P21/c with a = 1.83478（19）, b = 1.52707（18）, c = 1.9849（2） nm, β = 122.515（7）°, Z = 4, V = 4.6896（9） nm^3, Dc = 1.324 g/cm^3, μ（MoKα） = 1.103 mm^-1, F（000） = 1952, R = 0.0697 and wR = 0.2040. In addition, thermal stability and quantum chemical calculation of 1 were also studied.

Preparation of Copper Phthalocyanine Crystals Using Solvothermal Synthesis

A novel solvothermal synthesis method for the direct growth of B-form crystals of copper phthalocyanine（CuPc） is presented in this article. With quinoline as solvent, crystals were grown after cooling the reaction mixture of 1,3-diiminoisoindoline and copper oxide, heated for 9 h at 270 ℃, to room temperature in an autoclave. These high quality crystals were suitable for characterization measurements. The single-crystal diffraction data show a monoclinic system unit cell： a=1.4668（3） nm, b=0.48109（10） nm, c=1.9515（7） nm, a=90°, B=121.04（2）°, r=90°, where the corresponding cell volume is 1.17991 nm^3. Needle-like single crystals of CuPc up to 10.5 mm in length were obtained. The influences of different temperatures, reaction time and solvent volume on the crystal yields were also discussed. Optimum reaction conditions were 10 mL of quinoline, at 270 ℃ for 8 h.

Solvothermal Synthesis and Characterization of (NH_3CH_2CH_2NH_3)HgSnS_4 with a Column Structure

A compound （NH3 CH2 CH2 NH3 ）HgSnS4 with a column structure was synthesized solvothermally and characterized by X-ray single-crystal diffraction. This compound crystallizes in the monoclinic space group C2/c with a = 1. 3863 （6） nm, b = 0. 6640 （ 3 ） nm, c = 2. 3198 （10） nm, β = 106. 168 （ 7 ）° and Z = 8. It consists of anionic columns of [ HgSnS4 ]^2- that are interrupted by cationic columns of [ EnH2 ]^2＋ . Its thermal and optical properties were studied.

Solvothermal Synthesis, Structure and the Secondorder NLO Properties of a Novel Non-metal 3-D Borophosphate:（NH4）2[B2P2O8（OH）2]

A new non-metal 3-D borophosphate compound formulated as(NH4)2[B2P2O8(OH)2](1)has been synthesized by a solvothermal method and characterized by elemental analysis,energy-dispersive X-ray spectroscopy(EDS),IR spectrum and single-crystal X-ray diffraction.The borophosphate(NH4)2[B2P2O8(OH)2]crystallizes in the cubic system,space group P213 with Z=2,a=b=c=7.586(4)?,V=436.6(4)?3,Mr=281.64,Dc=2.127 g/cm^3,λ=0.71073?,μ=0.551 mm^-1,F(000)=284,R=0.0277 and wR=0.0758 for 262 observed reflections with I>2σ(I)and S=1.082.Its structure is constructed by the connection of PO4 and BO3(OH)tetrahedra to form a 3-D anionic framework containing 4-and 8-membered rings(MRs),with two NH4+cations located in the channels of the 8-membered rings.The N–H…O hydrogen bonds are observed in its packing structure and enhanced the stability of crystal structure.In addition,its thermal stability,UV spectrum and second-order NLO properties have been also investigated.

Synthesis of Nickel Sulfide Particles by Solvothermal Process

Pyrite nickel disulfide and millerite nickel monosulfide have been successfully prepared by solvothermal method based on the reaction of Ni(NO3)2.6H2O and H2NC(S)NH2 in benzene and ethylenediamine (EDA). The final products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM). The effects of the solvent, reaction temperature and time on the morphology and phase of the products have been discussed.

Solvothermal Synthesis and Crystal Structure of a Layered Thioantimonate(Ⅲ) [C_4H_9NH_3]_2Sb_4S_7

An inorganic-organic hybrid thioantimonate（Ⅲ） [CH3（CH2）3NH3]2Sb4S7 1 with layered structure was synthesized by solvothermal method. 1 crystallizes in the triclinic system, space group P1 with a = 7.0124（11）, b = 11.919（2）, c =14.879（3）A, α = 108.791（3）, β= 102.441（3）, γ = 92.846（2）°, V= 1140.1（3）A3, Mr = 859.71, Z= 2, Do = 2.504 g/cm^3 ,μ = 5.324 mm^-1, F（000） = 804, S = 1.013, the Final R = 0.0297 and wR = 0.0618 for 3534 observed reflections with Ⅰ 〉 2 σ（Ⅰ）. 1 consists of [C4HgNH3]＋ cations and two-dimensional [Sb4ST]n^2n- anion which is composed of three SbS3 trigonal pyranaids and one SbS4 unit joined by sharing common comers. The anionic layers are stacked perpendicularly to the c axis of the unit cell forming two-dimensional channels between the layers. The [C4H9NH3]^＋ cations interdigitate in a bilayer and reside in the 2D channels leading to a sandwich-like arrangement of the anion and cations.

Synthesis of the Complex Fluoride LiBaF_(3) through a Solvothermal Process

The complex fluoride LiBaF3 is solvothermally synthesized at 180degreesC and characterized by means of X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. In the solvothermal process, the solvents, mole ratios of initial mixtures and reaction temperature play important roles in the growth of the single crystal.

Solvothermal Synthesis of ZnIn2S4 by Alcohol Solvents and Visible Light Photocatalytic Activity on Selective Oxidation and Dye Degradation

A series of hexagonal ZnIn2S4 samples with different morphologies have been successfully prepared via a facile solvothermal approach using different alcohol solvents with the optimum synthesis time and temperature. X-ray diffraction, field emission scanning electron microscopy, UV-vis diffuse reflection spectroscopy and photoelectrochemical measurements are employed to determine the properties of the samples. It is found that the solvent has a significant influence on the morphology, optical properties and electronic nature of the samples. The photocatalytic activities of the samples have been evaluated by selective oxidation of benzyl alcohol to benzaldehyde to benzaldehyde and the degradation of methyl orange（MO） under visible light irradiation. The results reveal that the photocatalytic activities of ZnIn2S4 are closely related to the reaction solvent. The ethanol-mediated ZnIn2S4 exhibits the best photocatalytic performance toward selective oxidation of benzyl alcohol to benzaldehyde and the degradation of dye MO compared to the samples prepared in other solvents, which can be attributed to the integrative effect of the enhanced light absorption intensity and the prolonged lifetime of photogenerated carriers. In addition, a possible mechanism is proposed and discussed. It is expected that our current research could promote further interest on the synthesizing efficient ternary chalcogenides semiconducting materials for environment remediation and organic transformation.

Solvothermal Synthesis of V_2O_3 Catalysts for Oxidative Desulfurization of Dibenzothiophene

V2O3 nanoparticles with high surface area have been successfully prepared by a new solvothermal method without using any surfactant and template. The size of V2O3 nanoparticles is mostly equal to 10 nm-30 nm. The highest surface area of obtained V2O3 nanoparticles reaches 49 m2/g. Several kinds of V2O3 catalysts were prepared by different methods. All these V2O3 catalysts obtained thereby showed high catalytic activity for oxidative desulfurization(ODS) reaction by using tert-butyl hydroperoxide as the oxidant. The V2O3 catalyst with a highest ODS activity was obtained under the following conditions: The catalyst was prepared upon using V2O5 as the vanadium source, methanol as the solvent, and oxalic acid as the complexing reagent at a V2O5/oxalic acid molar ratio of 1:2. The process for ODS of dibenzothiophene was carried out under mild conditions(under atmospheric pressure and at a relatively low temperature). The highest ODS activity of the obtained V2O3 nanoparticles can be attributed to their highest surface area.

Solvothermal synthesis and characterization of nanocrystalline vanadium-chromium composite oxides and catalytic ammoxidation of 2,6-dichlorotoluene

Vanadium‐chromium oxides(VCrO)were usually prepared by high‐temperature solid‐state reactions;however,mixed phases were frequently produced and the morphology of the products was not well controlled.In this work,we prepared amorphous VCrO precursors by using V2O5 and CrO3 and alcohols or mixtures of alcohol and water via solvothermal reaction at 180°C.The precursors were then calcined under nitrogen at various temperatures.The products were characterized by powder X‐ray diffraction,transmission electron microscopy,and X‐ray photoelectron spectroscopy.It was revealed that pure‐phase nanocrystalline orthorhombic CrVO4 was obtained when methanol or methanol/water was used as the solvothermal medium and the precursor was calcined at 700°C.The size of the CrVO4 crystals was around 500 nm when methanol was used,whereas it reduced significantly to less than 50 nm when a mixture of methanol and water was used.The sizes could be effectively tuned from 10 to 50 nm by varying the methanol/water volume ratio.To the best of our knowledge,this is the first report on the synthesis of pure‐phase CrVO4 nanocrystals.The nano‐CrVO4 showed almost the highest catalytic activity for the ammoxidation of 2,6‐dichlorotoluene to 2,6‐dichlorobenzonitrile among the reported bi‐component composite oxides,owing to its smaller particle size,larger specific surface area,and more exposed active centers.

Solvothermal synthesis and thermoelectric properties of skutterudite compound Fe_(0.25)Ni_(0.25)Co_(0.5)Sb_3

Nanostructured skutterudite-related compound Fe0.25Ni0.25Co0.5Sb3 was synthesized by a solvothermal method using FeCl3, NiCl2, CoCl2, and SbCl3 as the precursors and NaBH4 as the reductant. The solvothermally synthesized powders consisted of fine granules with an average particle size of tens of nanometers. The bulk material was prepared by hot pressing the powders. Transport property measurements indicated a heavily doped semiconductor behavior with n-type conduction. The thermal conductivity is about 1.83 W·m-1·K-1 at room temperature and decreases to 1.57 W·m-1·K-1 at 673 K. The low thermal conductivity is attributed to small grain size and high porosity. A maximum dimensionless figure of merit of 0.15 is obtained at 673 K.

Synthesis and characterization of BaCeO_3 nanocrystals via solvothermal-based method

A facile approach to preparing well-dispersed nanocrystals of BaCeO3 was developed by a combination of solvothermal and annealing processes. The precursor consisted of amorphous BaCO3 and CeO2, and the conversion of the precursor to crystalline BafeO3 nanocrystals occurred upon heat treatment at a relatively low temperature. The as-processed BaCeO3 had an orthorhombic structure and the average size of such crystals was approximately 80 nm. The obtained products were characterized by Fourier Transform Infrared （FT-IR）, X-Ray Diffraction （XRD）, Laser Raman Spectroscopy （LRS）, Scanning Electron Microscopy （SEM）, Energy Dispersive X-Ray Spectrometry （EDS）, and Transmission Electron Microscopy （TEM）. This preparation process could also be used to synthesize doped barium cerate complex oxides Bafe0.95M0.05O3-δ （M=Y, Nd, Gd, and Sm）.

Solvothermal synthesis of Co-substituted phosphomolybdate acid encapsulated in the UiO-66 framework for catalytic application in olefin epoxidation

Hybrid composites of phosphomolybdic acid@UiO-66(PMo12@UiO-66)and Co-substituted phosphomolybdic acid@UiO-66(PMo11Co@UiO-66)were synthesized using the direct solvothermal method.A variety of characterization results demonstrated that phosphomolybdic acid(PMo12)or Co-substituted phosphomolybdate acid(PMo11Co)clusters are uniformly dispersed in the cages of Zr-based metal-organic UiO-66 frameworks.The catalytic properties of these hybrid composites were investigated by applying the epoxidation of olefins with tert-butyl hydroperoxide as the oxidant.Compared to PMo12@UiO-66,PMo11Co@UiO-66 showed a much higher catalytic activity and was simply recovered by filtration and reused for at least ten runs without significant loss of catalytic activity.Particularly,PMo11Co@UiO-66 can efficiently convert cyclic olefins like limonenes to epoxides,and its selectivity to 1,2-limonene oxide reached 91%in the presence of a radical inhibitor such as hydroquinone.The excellent catalytic activity and stability of the hybrid composite PMo11Co@UiO-66 are mainly attributed to the uniform distribution of highly active PMo11Co units within the smaller cages of UiO-66,to the suitable surface polarity of the hybrid composite for facilitating the access of reagents and solvent,and to the strong interface-interactions between the polyoxometalate and the UiO-66 framework.