A phase and microstructure selection map used for peritectic alloy directionally solidified under convection condition was presented,which is based on the nucleation,constitutional undercooling criterion（NCU criterio...A phase and microstructure selection map used for peritectic alloy directionally solidified under convection condition was presented,which is based on the nucleation,constitutional undercooling criterion（NCU criterion）,and the highest interface temperature criterion.This selection map shows the relationships between the phase/microstructure,the G/V ratio（G is the temperature gradient,V is the growth velocity）,and the alloy composition under different convection intensities and nucleation undercoolings.Comparing with the results from directional solidification experiments of Sn–Cd peritectic alloys,this selection map was generally in agreement with the experimental results.展开更多
Selective laser melting is an additive manufacturing method based on local melting of a metal powder bed by a high power laser beam. Fast laser scans are responsible for severe thermal gradients and high cooling rates...Selective laser melting is an additive manufacturing method based on local melting of a metal powder bed by a high power laser beam. Fast laser scans are responsible for severe thermal gradients and high cooling rates which produce complex hydrodynamic fluid flow. These phenomena affect crystal growth and orientation and are believed to be the cause of material spattering and microstructural defects, e.g. pores and incompletely melted particles. In this work, the microstructure and texture of 316L bars built along two different orientations and the effect of different distribution of defects on their mechanical response and failure mechanisms were investigated. Partially molten powder particles are believed to be responsible for the scattering in elongation to failure, reduced strength, and premature failure of vertical samples.展开更多
基金financially supported by the National Natural Science Foundation of China (No.50774061)the Research Fund of State Key Laboratory of Solidification Processing (NWPU) (No.28-TP-2009)
文摘A phase and microstructure selection map used for peritectic alloy directionally solidified under convection condition was presented,which is based on the nucleation,constitutional undercooling criterion（NCU criterion）,and the highest interface temperature criterion.This selection map shows the relationships between the phase/microstructure,the G/V ratio（G is the temperature gradient,V is the growth velocity）,and the alloy composition under different convection intensities and nucleation undercoolings.Comparing with the results from directional solidification experiments of Sn–Cd peritectic alloys,this selection map was generally in agreement with the experimental results.
文摘Selective laser melting is an additive manufacturing method based on local melting of a metal powder bed by a high power laser beam. Fast laser scans are responsible for severe thermal gradients and high cooling rates which produce complex hydrodynamic fluid flow. These phenomena affect crystal growth and orientation and are believed to be the cause of material spattering and microstructural defects, e.g. pores and incompletely melted particles. In this work, the microstructure and texture of 316L bars built along two different orientations and the effect of different distribution of defects on their mechanical response and failure mechanisms were investigated. Partially molten powder particles are believed to be responsible for the scattering in elongation to failure, reduced strength, and premature failure of vertical samples.
