Determination of Lead in Lime-preserved Egg by Microwave Digestion and Flame Atomic Absorption Spectroscopy

[Objectives] To establish a method for determining the lead content in lime-preserved eggs, to provide a theoretical basis for the quality control of production enterprises and the sampling and testing of supervision departments. [Methods] The lead content in lime-preserved eggs was measured by the microwave digestion and flame atomic absorption spectroscopy. [Results] The method had a correlation coefficient of r2=0.998 in the injection concentration range of 0-4 mg/L. The detection limit of the method was 0.008 2 mg/kg. In the range of 0.2 to 1.0 mg/kg addition concentration, the recovery rate of the method was 92.5%-108.0%, and the relative standard deviation(RSD) was <5%. [Conclusions] This method is accurate and reliable, simple and efficient, and is suitable for the detection of lead in lime-preserved eggs.

Determination of Arsenic and Mercury in Soil by Microwave Digestion and Hidride GenerationAtomic Fluorescence Spectrometry

[Objective] The aim was to develop a rapid, simple method for determina- tion of arsenic and mercury in soil samples by atomic fluorescence spectrometry. [Method] The method for determination of As and Hg in soil by combined atomic fluorescence spectrometry and microwave digestion was used. [Result] The concentration curve was linear within the range of 0-80.0μg/L of As and 0-8.0 μg/L of Hg, and the detection limits of As and Hg was 0.036 μg/L and 0.015 μg/L, respectively. The precision for elevenfold determination of As at 40.0 ug/L level and Hg at 4.0μg/L level were 1.1% and 2.2%（RSD）, respectively. Recoveries of 103.0%-106.6% for As and 90.0%-95.0% for Hg were obtained for there soil samples. [Conclusion] The proposed method has the advantages of simple operation, high sensitivity, and high efficiency; it was successfully used for determination of As and Hg in soil samples.

Determination of Chromium and Zinc in Soil by Microwave Digestion and Flame Atomic Absorption Spectrometry

[Objective] The aim was to develop a rapid, simple method for determination of chromium and zinc in soil samples by flame atomic absorption spectrometry.[Method] The method for determination of Cr and Zn in soil by combined flame atomic absorption spectrometry and microwave digestion was used. [Result] The concentration curve was linear within the range of 0-0.8 mg/L for Cr and 0-0.8 mg/L for Zn, the detection limits of Cr and Zn was 0.0025 mg/L and 0.002 3 mg/L, respectively. Recoveries of 102.4%-103.2% for Cr and 97.7%-98.3% for Zn were obtained for there soil samples. [Conclusion] The proposed method has the advantages of simple operation, high sensitivity, and high efficiency; it was successfully used for determination of Cr and Zn in soil samples.

Determination of Mg Content in Crayfishby Microwave Digestion-Flame Atomic Absorption Spectrometry

[Objective] This study was conducted to investigate the Mg level in cray- fish. [Method] Microwave digestion was applied to treat crayfish sample, Mg content in which was then determined by flame atomic absorption spectrometry, and recov- ery test and the determination of standards were also performed. [Result] This method was used for the detection of Mg in crayfish, obtaining satisfactory effect. The sample recoveries were in the range of 90.0%-110%, and the detection limit was 0.8 mg/kg. [Conclusion] The method is rapid, simple, accurate and reliable, worth extending.

Application of ICP-AES with Microwave Digestion to Detect Trace Elements in Oysters from Jiaozhou Bay,China

Using ICP-AES with microwave digestion, we determined the concentrations of 16 trace elements in oysters from six sampling points in Jiaozhou Bay.The distributions of the wholesome elements Zn, Fe and Mn, and heavy metals such as As,Cd,Hg and Pb were studied.The oysters collected are all rich in the wholesome trace elements,and the oysters from Licun River have the highest concentrations of the three wholesome trace elements.The concentrations of heavy metals in oysters from Licun River are the highest and those from Hongdao are the lowest. Compared with the domestic and foreign sea-areas,the heavy metal contents in the oysters from Jiaozhou Bay are less in amount than those from some developed countries, and more than those in Southeast China.This implies that the Jiaozhou Bay's oysters have been polluted by the environment to some extent.

Application of closed-vessel microwave digestion method for the determination of multi-elements in environmental samples by sequential ICP-AES

A closed-vessel microwave digestion method is described for the rapid dissolution of environmental samples such as foods, soils and sediments. Depending on the sample type, 0.1-0.2 g sample was decomposed with HNO3/H2O2 or HNO3 / H2O2/HF acid mixture in a PTFE digestion vessel by using microwave heating for 2-3 min at 500W of microwave power. The solution, or to which 0.5 g of boric acid was added, was diluted to 25-50 ml and directly determined by sequential ICP-AES. The accuracy of the procedure was validated by the analysis of six standard reference materials for 10 elements. Ail results were in a good agreements with the certified values.

Microwave digestion method in environmental analysis

This paper introduced the history,equipment and mechanism of the microwave digestion method. This paper studied the optimization parameter of digestion conditions, such as acid and acid combination, digestion time and applied microwave power,particle size,and other factors.The analytical performance in environmental research and the modification of the microwave digestion method were also discussed.

Theoretical Research on the Import and Export of Iron Ore and Harmful Element Detection Method based on Microwave Digestion Inductively Coupled Plasma Mass Spectrometry Approach

In this paper, we conduct research on the import and export of iron ore and harmful element detection method based on microwave digestion inductively coupled plasma mass spectrometry approach. Our country gradually increased demand for iron ore, iron ore trade, in order to ensure that the quality of the iron ore and taste which must be tested for total iron content. At the same time it also increased the demand for iron ore, although China＇ s iron ore production has been greatly improved. Our proposed approach optimizes the traditional detection method which will be meaningful.

Microwave assisted digestion followed by ICP-MS for determination of trace metals in atmospheric and lake ecosystem

The study of trace metals in the atmosphere and lake water is important due to their critical effects on humans, aquatic animals and the geochemical balance of ecosystems. The objective of this study was to investigate the concentration of trace metals in atmospheric and lake water samples during the rainy season （before and after precipitation） between November and December 2015. Typical methods of sample preparation for trace metal determination such as cloud point extraction, solid phase extraction and dispersive liquid- liquid micro-extraction are time-consuming and difficult to perform; therefore, there is a crucial need for development of more effective sample preparation procedure. A convection microwave assisted digestion procedure for extraction of trace metals was developed for use prior to inductively couple plasma-mass spectrometric determination. The result showed that metals like zinc （133.50-419.30 μg/m3） and aluminum （53.58-378.93 μg/m3） had higher concentrations in atmospheric samples as compared to lake samples before precipitation. On the other hand, the concentrations of zinc, aluminum, chromium and arsenic were significantly higher in lake samples after precipitation and lower in atmospheric samples. The relationship between physicochemical parameters （pH and turbidity） and heavy metal concentrations was investigated as well. Furthermore, enrichment factor analysis indicated that anthropogenic sources such as soil dust, biomass burning and fuel combustion influenced the metal concentrations in the atmosphere.

Determination of Cadmium and Lead in Sugarcane by Graphite Furnace Atomic Absorption Spectrometer with Zeeman Correction

[Objective] The aim was to develop a rapid,simple method for determination of cadmium and lead in sugarcane samples by graphite furnace atomic absorption spectrometry.[Method] The method for determination of Cd and Pb in sugarcane by combined graphite furnace atomic absorption spectrometry and microwave digestion was used.[Result] The concentration curve was linear within the range of 0-0.80 μg/L the detection limits of Cd and Pb was 0.015 and 0.030 μg/L,respectively.The precision for elevenfold determination of Cd and of Pb at the 0.40 μg/L level were 1.8% and 2.3%（RSD）,respectively.Recoveries of 96.7%-98.2% for Cd and 104.6%-106.7% for Pb were obtained for two sugarcane samples and one certified reference material.[Conclusion] The proposed method has the advantages of simple operation,high sensitivity,and high efficiency;it was successfully used for determination of Cd and Pb in sugarcane samples.

电感耦合等离子体质谱测定大气铅污染物

Inductively coupled plasma mass spectrometry(ICP-MS) was used to determine the concentration of Pb in atmospheric particulate samples,and the enrichment factor was calculated.The causes of the results were also discussed.

Determination of Ca,K,Mg and Fe in Four Fish Species by FAAS

A method for determining calcium （Ca）, potassium （K）, magnesium （Mg） and iron （Fe） in four fish species was opti- mized and validated. It included microwave mineralization of the samples and subsequent quantification by flame atomic absorption spectroscopy （FAAS） with Zeeman-effect background correction. Using HNO3 （65%） and H202 （33%） as extraction solutions, the optimal conditions of extraction were established as follows： 0.5 g of sample mass; microwave time program of 300 W/5 min and 600 W/5 min. The method was free of matrix interferences. The linear correlation coefficients were ≥0.9991, the recovery percentage of analytes was from 99.31% to 103.70% and the RSD （relative standard deviation） was lower than 2.06%. The detection limits obtained were 32.3, 43.2, 14.0 and 68.6ng mL^-1 for Ca, K, Mg and Fe in FAAS respectively. It is shown that the method is rapid, simple, sensitive and accurate. The method was applied to the studies of digestibility and measurement of these nutrients in samples of fish collected from Norway, Japan and China.

Determination of trace multi-elements in coal fly ash by inductively coupled plasma mass spectrometry

The contents of Cr, Cu, Ni, As, Cd and Pb in coal fly ash were determined by a high resolution inductively coupled plasma mass spectrometry method. The sample digestions were performed in closed microwave vessels with HNO3, HClO4 and FIE The optimum conditions for the determination were obtained. The applicability of the proposed method was validated by the analysis of coal fly ash reference material （NIST SRM 1633a）. The results show that most of the spectral interferences can be avoided by measuring in the high resolution mode （maximum mass resolution R=9 000）. The detection limit is from 0.05 to 0.21 μg/g, and the precision is fine with relative standard deviation less than 4.3%.

Direct Determination of Trace Impurities in High Purity Zinc Oxide by High Resolution Inductively Coupled Plasma Mass Spectrometry

The determination of trace impurities in high purity zinc oxide by high resolution inductively coupled plasma mass spectrometry （ HR-ICP-MS ） was investigated. To overcome some poteutially problematic spectral iuterference, measurements were acquired in both middle and high resolution modes. The matrix effects due to the presence of excess HCl and zinc were evaluated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits ranged from 0.02μg/ g to 6 μg/ g depending on the elements. The experimental resalts for the determination of Na, Mg, Ca, Cr, Mn, Fe, Co, Ni, Cu, Mo, Cd, Sb and Pb in several high purity zinc oxide powders were presented.

Determination of Heavy Metals in Tobacco by ICP-MS and Analysis of Uncertainty

The research aims to set up the determination method of heavy metals in tobacco by ICP-MS and analyze its uncertainty. Microwave digest technique is used for decomposition of the tobacco samples. Bi,Sc,Ge and In are employed as internal standards to eliminate the interference of the matrix. A method is developed for simultaneous determination of Cr,Cu,As,Cd,Hg and Pb in tobacco from Yunnan Province by ICP-MS,and the measurement uncertainty is evaluated by metrological method. The test results indicate that in the content range of0- 1. 0 g / ml,the linearly dependent coefficient of six elements is 1. 0000,and the RSD achieves 1. 5%- 11%( n = 8). The elemental content in tobacco is as follows: Cr( 2. 92,0. 24) mg / kg,Cu( 3. 64,0. 24) mg / kg,As( 0. 467,0. 025) mg / kg,Cd( 3. 12,0. 15) mg / kg,Hg( 0. 035,0. 006) mg/kg,Pb( 4. 62,0. 36) mg/kg. The uncertainty of sample size,the constant volume of the sample solution can be neglected. It is concluded that the method is accurate,simple,sensitive and rapid.

Determination of Trace Elements in Famous Teas from Huangshan Area by ICP-AES

With an Iris Intrepid II XSP ICP full spectrum ICP emission spectrometer,trace elements including Se,Fe,Mn,Cd,Cr,Co,Ni,Cu,Pb and Zn in Huangshan teas were determined.The best analysis conditions were selected by experiments.The method is simple and rapid,and the precision and accuracy are all in line with the requirements.This method was used to analyze actual tea samples with satisfactory results.

Analysis of trace elements in air particulate matters by non-suppressed ion chromatography

The application of non-suppressed ion chromatography for monitoring of trace elements in air particulate matter was studied in the present investigation. The results indicate that the use of microwave acid digestion method is superior in comparison with the conventional thermal acid digestion method as it leads to higher recovery, better reproducibility, lower volatility loss, better protection against environmental contamination and much less digestion time (5 minutes vs. 24 hours). The use of eluent as extractant is shown to reduce the water dip problem in the chro-matogram. The addition of chelating agent in the eluent coupled with UV detection is shown to provide satisfactory chromatographic separation and good sensitivity for the analysis of transition metals present in the air particulate matter. Using the U.S. National Bureau of Standards Reference Material 1648 Urban Particulate Matter as standard for checking, the analytical procedure is shown to give good recovery and reproducibility for the detection of the following cations and anions in air particulate matter: Fe2 Cu, Mn, Pb, Zn, Mg, Na, HN4+, Cl-, NO3- and SO42-. Field test was also performed to check the applicability of the method and the results obtained were discussed in the present paper.

Trace Metal Pollution From Traffic in Denizli-Turkey During Dry Season

Objective To determine the metal contents of date palm （Pheonix dactylifera） samples in dry season from Denizli-Turkey for investigation of heavy metal-polluted traffic. Method The levels of iron, copper, zinc, lead, cadmium, nickel, chromium, and manganese ions in the leaves of thirty five date palm （Pheonix dactylifera） samples collected from various levels of traffic in the streets of Denizli-Turkey were determined by graphite furnace or flame atomic absorption spectrometry. The wet, dry, and microwave digestion procedures for the date palm （Pheonix dactylifera） leaves were compared. The accuracy of the digestion procedures was checked using a standard reference material （IAEA-336 Lichen, SRM）. Results Microwave digestion procedure for the leaves was preferred because it was more proper with respect to both time and recovery than dry and wet digestion. The levels of the heavy metal ions investigated were the highest on the samples from high traffic level. Also correlations between metal levels and traffic volume for all the metals were investigated. Conclusion In the light of our findings, the date palm （Phoenix dactylifera） leaves are suitable as a biomonitor for atmospheric heavy metal-polluted traffic. Significant correlations can be obtained between traffic levels and heavy metal concentrations.

Interference-Free Determination of REEs in Electronic Waste Using ICP Optical Emission Spectroscopy

Recently, the demand for REEs （rare earth elements） has been heavily increasing, as they are used in many high-tech products （e.g., because of their specific magnetic behavior）. As a result, the supply situation for REEs is worsening and the world market is depending on Chinese exports, so that it may be worthwhile to recycle e-waste （electronic waste） in European countries. This article describes an analytical method to analyze REEs in different kinds of e-waste with the help of a simultaneous ICP-OES （ICP optical emission spectrometer）. The task is challenging because samples show significant differences in terms of major, minor and trace element concentrations. Depending on the field of application, the level of matrix elements and target elements differs completely, resulting in a wide variety of spectral interferences. The method presented in this article allows an accurate quantification of REEs as well as a high sample throughput. In addition to REEs, other elements of economic interest can be determined in the same way. The development of a sample preparation process is another important issue and considered as well.

Determination of Harmful Elements and Analysis of Pollution Level in Lysimachia christinae

[Objectives]To detect content of Pb,Cd,Hg,As,Cu,Zn,and Cr in Lysimachia christinae,and to analyze the pollution level.[Methods]Seven kinds of elements in L.christinae were determined by Inductively coupled plasma mass spectrometry and analyzed by single index and comprehensive index.[Results]The seven heavy metal elements showed good linearity in their respective concentration ranges.The recoveries of the samples were 84.5%-109.5%,and the RSD values were 2.30%-5.10%.Comparing the measured results of heavy metal elements with the limit values stipulated in the 2020 edition of the Chinese Pharmacopoeia and other standards,the Cr element in 19 batches of samples exceeded the standard,and the Zn element in 7 batches of samples exceeded the standard.The exceeding rates were 100.0%and 36.8%,respectively;the content of other heavy metal elements did not exceed the standard.The order of individual index from large to small was Cr,Zn,Cd,Hg,Cu,As,and Pb,and the average comprehensive pollution level was mild pollution and above.[Conclusions]L.christinae was mainly polluted by Cr,followed by Zn;this study can provide basic data for drafting of the limit standard for heavy metal elements in L.christinae.