Extraction of Cinnamomum longepaniculatum deciduous leaves essential oil using solvent-free microwave extraction: Process optimization and quality evaluation

The optimal process conditions for solvent-free microwave extraction(SFME)of essential oils from Cinnamomum longepaniculatum deciduous leaves after moisture conditioning were established by response surface methodology(RSM).A Box-Behnken design(BBD)was applied to evaluate the effects of three independent variables:moisture content(A:54%–74%),microwave power(B:300–500 W)and microwave time(C:20–40 min),on the extraction yield of essential oil.The compounds of the essential oils obtained by SFME,hydro-distillation and microwaveassisted hydro-distillation(MADE)were identified by gas chromatography-mass spectrometry(GC-MS),and the total lipids of C.longepaniculatum fresh leaves and deciduous leaves were analyzed.The correlation analysis of the response regression model indicated that quadratic polynomial model could be employed to optimize the extraction of essential oil.The optimal extraction condition was A:58%,B:400 W and C:28 min.In the optimal condition,the maximum extraction yield was 4.475 mL/100 g dw and higher than that by MADE.The main compound of the essential oil was eucalyptol(63.54%),and total oxygenated compounds was 78.95%,mainly caused by SFME and the metabolism of endophytic bacteria with decreasing content of phospholipids and fatty acids.Analysis of variance under the extraction condition illustrated high fitness of the model and the success of RSM for optimizing and reflecting the expected process condition.SFME combined with moisture regulation was an effective method for extracting essential oil from C.longepaniculatum deciduous leaves.

Effect of Process Parameters of Microwave Assisted Extraction (MAE) on Polysaccharides Yield from Pumpkin

Process parameters of microwave assisted extraction （MAE） of the polysaccharides from pumpkin viz. extraction temperature, time and liquid-solid ratio were studied by using single factor and response surface methodology method. The results showed that the liquid-solid ratio was the most important factor in polysaccharides yield, followed the extraction temperature was the least important factor. The optimum microwave assisted extraction co by ndi extraction time, and tions for the highest polysaccharides yield from pumpkin （16.76%-4-0.38%） were obtained by using the response surface methodology with extraction time of 29 min, an extraction temperature of 79 ℃ and a liquid-solid ratio of 22 mL·g^-1. Validation experiment result well agreed with predicted value.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol（1∶15,v/v）for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Kinetic Mechanisms for Preparing Silymarin via Microwave-assisted Extraction

The kinetic mechanism for the preparation of silymarin from milk thistle seeds was studied during the microwave-assisted extraction （MAE） process. The results showed that the transfer rate of silymarin from milk thistle seeds increased with the microwave output power and temperature during MAE processing. The apparent extraction rate constant k （s-1） was 1.2028×10-2 , 1.2248×10-2 , and 1.2485×10-2 , and diffusion coefficient D （m2·s-1 ） was 4.21×10-10, 4.29×10-10 , and 4.37×10-10 at the microwave temperatures of 383, 393, and 403 K, respectively, in the silymarin MAE process. With the help of scanning electron microscopy （SEM）, the microstructures of the samples extracted by MAE were observed. The results revealed that the increased efficiency and rate of MAE of silymarin could be attributed mainly to the subsequent cell change resulting from superheating effects during MAE.

Comparison of the mechanisms of microwave roasting and conventional roasting and of their effects on vanadium extraction from stone coal

Experiments comparing microwave blank roasting and conventional blank roasting for typical vanadium-bearing stone coal from Hubei Province in central China, in which vanadium is present in muscovite, were conducted to investigate the effects of roasting tempera- ture, roasting time, H2SO4 concentration, and leaching time on vanadium extraction. The results show that the vanadium leaching efficiency is 84% when the sample is roasted at 800℃ for 30 min by microwave irradiation and the H2SO4 concentration, liquid/solid ratio, leaching temperature, and leaching time are set as 20vo1%, 1.5：1 mL.g-1, 95℃, and 8 h, respectively. However, the vanadium leaching efficiency achieved for the sample subjected to conventional roasting at 900℃ for 60 min is just 71% under the same leaching conditions. Scanning electron microscopy （SEM） analysis shows that the microwave roasted samples contain more cracks and that the particles are more porous compared to the conventionally roasted samples. According to the results of X-ray diffraction （XRD） and Fourier-transform infrared （FTIR） analyses, neither of these roasting methods could completely destroy the mica lattice structure under the experimental conditions; however, both methods deformed the muscovite structure and facilitated the leaching process. Comparing with conventional roasting, microwave roasting causes a greater deformation of the mineral structure at a lower temperature for a shorter roasting time.

Study on microwave-assisted extraction of coal

The effect of different factors on coal extraction yield-temperature, solvent, coal type and irradiation time were investigated for different China coals under microwave-assisted extraction（MAE）. The results show that the optimum temperature for ethanol, acetone and THF are 393,373 and 373 K respectively and the extraction yield of THF is higher than that of other two solvents under MAE. Extraction with several single organic solvents were conducted for the 5 typical China coals-Shenfu, Tongchuan, Panzhihua, Yitai and Huating coal under microwave-assisted extraction and Soxhlet extraction. Results indicat that extraction yield of ethylenediamine, ethanol, acetone, tetrahydrofuran under MAE are all higher than that of Soxhlet extraction and MAE required less time. Tongchuan coal extracts of ethanol and acetone which were extracted by MAE and Soxhlet extraction were analyzed by GC/MS.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Optimization of the microwave-assisted extraction of phlorotannins from Saccharina japonica Aresch and evaluation of the inhibitory effects of phlorotannin-containing extracts on HepG2 cancer cells

The use of a microwave-assisted extraction （MAE） method for the extraction ofphlorotannins from Saccharinajaponica Aresch （S.japonica） has been evaluated with particular emphasis on the influential parameters, including the ethanol concentration, solid/liquid ratio, extraction time, extraction temperature, and microwave power. The MAE procedure was optimized using single-factor design and orthogonal array design （OAD）. The content of total phlorotannins in S. japonica was determined using a Folin-Ciocalteu （FC） assay. A maximum total phlorotannin content of 0.644 mg of phloroglucinol equivalent per gram of dry weight plant （mg PGE/g DW） was obtained using the optimized model, which included an ethanol concentration of 55%, solid/liquid ratio of 1：8, extraction time of 25 min, irradiation power of 400 W, and temperature of 60~C. Under similar conditions, the application of a conventional extraction method led to a lower phlorotarmin yield of 0.585 mg PGE/g WD. These results demonstrated that the MAE approach provided better results for the extraction ofphlorotarmins from S.japonica and was a promising technique for the extraction of phenolic compounds from S. japonica and other materials. In addition, screening tests for the inhibitory activity showed that the phlorotannin-containing extracts significantly inhibited the growth of human hepatocellular carcinoma cells （HepG2） by inducing their apoptosis. The morphological changes that occurred during cell apoptosis were characterized using Hoechst33258 staining.

Microwave assisted-semi bionic extraction of lignan compounds from Fructus Forsythiae by orthogonal design

Microwave assisted-semi bionic extraction (MASBE) process for lignans from Fructus Forsythiae was studied. The influences of solvent pH value, microwave power, dosage of solvent and irradiation time were investigated. Optimum extracting parameters were determined by orthogonal experiments as follows: pH value of solvent at first extraction is 5.5-6.0, that at the second extraction is 7-8; microwave power is 700 W; mass ratio of Fructus Forsythiae to water is 1-12; irradiation time is 10 min, and extracting times is two. Under these optimal conditions, the yield of lignans reaches 0.364%. Compared with the conventional extraction methods, the MASBE process has the advantages of high extraction rate, high extraction selectivity.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Application and research advancement on the microwave-assisted extraction

This paper summarized application and research advancement of the microwave-assisted extraction in the agriculture, food industry, environmental analytical chemistry, traditional Chinese medicine industry, and so on. The microwave-assisted extraction was manifested to be a simple device, wide area of application, high extraction efficiency, good reproducibility and low consumption of agent and time as well as low environmental pollution. At present, industrialization question of the microwave-assisted extraction technology has been attached importance, which will impel the microwave-assisted extraction technology to more development in the future

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.

Enzymatic pretreatment and microwave extraction of asiaticoside from Centella asiatica

The extraction of asiaticoside from Centella asiatica by enzymatic pretreatment and microwave extraction (EPME) was studied in this article. The effects of several important factors such as temperature of enzymatic pretreatment, liquid to solid ratio and microwave radiation time were investigated by quadric regression orthogonal design experiment and were analyzed by response surface. An extraction model with well forecast performance was then established. The results indicate that the optimum extraction condition was as follows: liquid to solid ratio was 36mL/g, temperature of enzymatic pretreatment was 45℃, enzymatic time was 30min, and microwave ra-diation time was

Optimization of Microwave Assisted Alkaline Extraction of Xylan from Birch Wood Using Response Surface Methodology

The main purpose of this study was to optimize microwave assisted alkaline extraction of the hemicellulose, xylan, from birch wood. The simultaneous effects of process variables such as time (10 - 30 minutes), concentration of sodium hydroxide solution (4 - 8 wt%), solid to liquid ratio (1:8 to 1:20, g:mL), and sample size (5 - 10 g) on the temperature of the wood slurry, wood dissolution, and yield of extraction were evaluated. A central composite design (CCD) and response surface methodology (RSM) were used for the optimization of the extraction process. Based on the CCD, quadratic models were developed to correlate the extraction process variables with the responses such as temperature of wood slurry, wood dissolution, and yield of xylan and the models were analyzed using appropriate statistical methods (ANOVA). Statistical analysis showed that all the models developed were found to be adequate for the prediction of the respective responses. Optimization of the process was performed using a numerical optimization available in the software to maximize the yield of xylan and the optimum process variables for the maximum yield of xylan was found to be: 10 g of wood fibres, 8 wt% of NaOH solution, 1:10 solid to liquid ratio (g:mL) and 25 minutes of irradiation time. About 72.5% of the xylan present in the birch wood was extracted using the optimized extraction parameters.

Rapid Lab-Scale Microwave-Assisted Extraction and Analysis of Anthropogenic Organic Chemicals in River Sediments

An Ethos EZ Microwave Lab Station is employed in the development of a robust and efficient microwave extraction method for organic contaminants of anthropogenic origin in river sediments. The extraction method is designed for a small, representative set of target compounds encompassing a range of physicochemical properties. Listed in order of gas chromatography elution they are para-cresol, indole, 4-tert-octylphenol, phenanthrene, triclosan, bisphenol-A, carbamazepine, and benzo [a] pyrene. The sediments samples are extracted wet, which reduces preparation time, and allows the ambient moisture of the sediments to aid in microwave energy absorption and the extraction process. The microwave can hold up to 12 samples that can be simultaneously extracted allowing for rapid sample preparation. Utilizing the pressurized vessels, microwave energy, and a unique mixture of three organic solvents allows for multiple samples to be extracted rapidly with minimal solvent consumption. The final extracts are quantified by gas chromatography/mass spectrometry. Recoveries of the 8 target compounds in sediment range from 49% to 113%, and method detection limits range between 14 and 114 μg kg–1, which are comparable with other more time consuming methods.

Study on chromatographic fingerprint of sarcandra glabra (Thunb.) by microwave-assisted extraction coupled to HPLC/DAD

Microwave-assisted extraction(MAE)was used for extraction of effective components of sarcandra glabra(Thunb.),and then chromatographic fingerprint of sarcandra glabra(Thunb.)was studied by high performance liquid chromatography/diode array detector(HPLC/DAD).The conditions of MAE were optimized by an orthogonal experiment,and then the authentication and validation of the chromatographic fingerprint were conducted.Nine peaks were identified as common peaks in the fingerprint chromatograms,and isofraxidin was considered as a reference compound and quantified.Relative standard deviations of retention time and peak area of each component were less than 3% and 8%,respectively.Similarity and difference analysis were conducted by use of PCA and relation coefficient.Twenty batches of sarcandra glabra(Thunb.)samples from two different producing areas could be classified into two different groups in the PCA model.The results showed that MAE-HPLC/DAD method was simple,efficient and stable for the study of complex chromatographic fingerprint of sarcandra glabra(Thunb.),which could provide more reliable and precise information for quality evaluation.