This paper investigates a microwave heating method for the determination of chemical oxygen demand (COD) in seawater. The influences of microwave-power, heating time and standard substances on the results are studied....This paper investigates a microwave heating method for the determination of chemical oxygen demand (COD) in seawater. The influences of microwave-power, heating time and standard substances on the results are studied. Using the proposed method, we analyzed the glucose standard solution, the coefficient of variation being less than 2%. Compared with the traditional electric stove heating method, the results of F-test and T-test showed that there was no significant difference between the two methods, but the microwave method had slightly higher precision and reproducibility than the electric stove method. With the microwave heating method, several seawater samples from Jiaozhou Bay and the South Yellow Sea were also analyzed. The recovery was between 97.5% and 104.3%. This new method has the advantages of shortening the heating time, improving the working efficiency and having simple operation and therefore can be used to analyze the COD in seawater.展开更多
In this peper we have synthesized powder crystal form (Y,Gd) BO3:Eu(3+)Phosphors by microwave heating method. ItS structure belongs to hexagonal system with lattice parameters a=0.3796,c=0. 8835. Its excitation spetra...In this peper we have synthesized powder crystal form (Y,Gd) BO3:Eu(3+)Phosphors by microwave heating method. ItS structure belongs to hexagonal system with lattice parameters a=0.3796,c=0. 8835. Its excitation spetra peaks at 239.0nm and 240. 0nm monitored at the emission of 589nm and 612nm respectively, the half peak width is 40nm. Under 240nm excitation the phosphors show a strons oranse-red luminescence, the fluorescent intensity ratio for I589/I612 is 1.9/1展开更多
This work has performed a numerical simulation of the temperature field during microwave heating of polyolefin-absorber mixture by means of a combined electric and thermal model.A finite difference time domain was use...This work has performed a numerical simulation of the temperature field during microwave heating of polyolefin-absorber mixture by means of a combined electric and thermal model.A finite difference time domain was used to model the electric field distribution within the cavity,while the finite difference method was used to calculate the temperature field distribution in different reactors.This study has focused only on the process from room temperature to 500 K for reducing heating time and energy consumption.This temperature range is a process with high energy consumption,difficult to control and great influence on the follow-up reaction.Temperature dependence of dielectric properties and thermal properties of heated materials are fully considered and simulated through an iterative process.The simulation results show that input power,the size and location of the heated materials,the position of the waveguide,and the kinds of microwave absorbers are important factors affecting the heating process.As a result,the uniform temperature distribution(the temperature difference Tdb10 K)can be achieved by choosing the appropriate input power(500–2000 W),the appropriate proportion of microwave absorber(the volume ratio of Si C to HDPE is 30:70),and combining with the moving and rotating of the heated materials.The uniform temperature field obtained without mechanical stirring is very important for reducing energy consumption and subsequent reactions.展开更多
The interactions of electromagnetic waves with the human body are complex and depend on several factors related to the characteristics of the incident wave, including its frequency, its intensity, the polarization of ...The interactions of electromagnetic waves with the human body are complex and depend on several factors related to the characteristics of the incident wave, including its frequency, its intensity, the polarization of the tissue encountered, the geometry of the tissue and its electromagnetic properties. That’s to say, the dielectric permittivity, the conductivity and the type of coupling between the field and the exposed body. A biological system irradiated by an electromagnetic wave is traversed by induced currents of non-negligible density;the water molecules present in the biological tissues exposed to the electromagnetic field will begin to oscillate at the frequency of the incident wave, thus creating internal friction responsible for the heating of the irradiated tissues. This heating will be all the more important as the tissues are rich in water. This article presents the establishment from a mathematical and numerical analysis explaining the phenomena of interaction and consequences between electromagnetic waves and health. Since the total electric field in the biological system is unknown, that is why it can be determined by the Finite Difference Time Domain FDTD method to assess the electromagnetic power distribution in the biological system under study. For this purpose, the detailed on the mechanisms of interaction of microwave electromagnetic waves with the human body have been presented. Mathematical analysis using Maxwell’s equations as well as bio-heat equations is the basis of this study for a consistent result. Therefore, a thermal model of biological tissues based on an electrical analogy has been developed. By the principle of duality, an electrical model in the dielectric form of a multilayered human tissue was used in order to obtain a corresponding thermal model. This thermal model made it possible to evaluate the temperature profile of biological tissues during exposure to electromagnetic waves. The simulation results obtained from computer tools show that the temperature in the biological tissue is a linear function of the duration of exposure to microwave electromagnetic waves.展开更多
文摘This paper investigates a microwave heating method for the determination of chemical oxygen demand (COD) in seawater. The influences of microwave-power, heating time and standard substances on the results are studied. Using the proposed method, we analyzed the glucose standard solution, the coefficient of variation being less than 2%. Compared with the traditional electric stove heating method, the results of F-test and T-test showed that there was no significant difference between the two methods, but the microwave method had slightly higher precision and reproducibility than the electric stove method. With the microwave heating method, several seawater samples from Jiaozhou Bay and the South Yellow Sea were also analyzed. The recovery was between 97.5% and 104.3%. This new method has the advantages of shortening the heating time, improving the working efficiency and having simple operation and therefore can be used to analyze the COD in seawater.
文摘In this peper we have synthesized powder crystal form (Y,Gd) BO3:Eu(3+)Phosphors by microwave heating method. ItS structure belongs to hexagonal system with lattice parameters a=0.3796,c=0. 8835. Its excitation spetra peaks at 239.0nm and 240. 0nm monitored at the emission of 589nm and 612nm respectively, the half peak width is 40nm. Under 240nm excitation the phosphors show a strons oranse-red luminescence, the fluorescent intensity ratio for I589/I612 is 1.9/1
基金financial support from the National Natural Science Foundation of China(No.21776288)the State Key Laboratory of Multiphase Complex Systems,Institute of Process Engineering,Chinese Academy of Sciences(No.MPCS2020-A-01)+1 种基金the National R&D Infrastructure and Facility Development Program of China,Fundamental Science Data Sharing Platform(DKA2017-12-02-05)CAS informatization project during the Thirteenth Five-Year Plan“Key Database Construction and Application Services for the Discipline of Chemistry”(XXH1350303-103)。
文摘This work has performed a numerical simulation of the temperature field during microwave heating of polyolefin-absorber mixture by means of a combined electric and thermal model.A finite difference time domain was used to model the electric field distribution within the cavity,while the finite difference method was used to calculate the temperature field distribution in different reactors.This study has focused only on the process from room temperature to 500 K for reducing heating time and energy consumption.This temperature range is a process with high energy consumption,difficult to control and great influence on the follow-up reaction.Temperature dependence of dielectric properties and thermal properties of heated materials are fully considered and simulated through an iterative process.The simulation results show that input power,the size and location of the heated materials,the position of the waveguide,and the kinds of microwave absorbers are important factors affecting the heating process.As a result,the uniform temperature distribution(the temperature difference Tdb10 K)can be achieved by choosing the appropriate input power(500–2000 W),the appropriate proportion of microwave absorber(the volume ratio of Si C to HDPE is 30:70),and combining with the moving and rotating of the heated materials.The uniform temperature field obtained without mechanical stirring is very important for reducing energy consumption and subsequent reactions.
文摘The interactions of electromagnetic waves with the human body are complex and depend on several factors related to the characteristics of the incident wave, including its frequency, its intensity, the polarization of the tissue encountered, the geometry of the tissue and its electromagnetic properties. That’s to say, the dielectric permittivity, the conductivity and the type of coupling between the field and the exposed body. A biological system irradiated by an electromagnetic wave is traversed by induced currents of non-negligible density;the water molecules present in the biological tissues exposed to the electromagnetic field will begin to oscillate at the frequency of the incident wave, thus creating internal friction responsible for the heating of the irradiated tissues. This heating will be all the more important as the tissues are rich in water. This article presents the establishment from a mathematical and numerical analysis explaining the phenomena of interaction and consequences between electromagnetic waves and health. Since the total electric field in the biological system is unknown, that is why it can be determined by the Finite Difference Time Domain FDTD method to assess the electromagnetic power distribution in the biological system under study. For this purpose, the detailed on the mechanisms of interaction of microwave electromagnetic waves with the human body have been presented. Mathematical analysis using Maxwell’s equations as well as bio-heat equations is the basis of this study for a consistent result. Therefore, a thermal model of biological tissues based on an electrical analogy has been developed. By the principle of duality, an electrical model in the dielectric form of a multilayered human tissue was used in order to obtain a corresponding thermal model. This thermal model made it possible to evaluate the temperature profile of biological tissues during exposure to electromagnetic waves. The simulation results obtained from computer tools show that the temperature in the biological tissue is a linear function of the duration of exposure to microwave electromagnetic waves.
