Optimization of Microwave-assisted Extraction Technology of Polyphenols from Loropetalum chinense(R. Br.) Oliv

In order to optimize the microwave-assisted extraction technology of polyphenols from Loropetalum chinense （R. Br.） Oliv., the effects of microwave power, ethanol concentration, solid to liquid ratio and extraction time on polyphenols extraction rate were investigated. On the basis of single-factor test, a four-factor and three-level orthogonal test was designed by response surface method to establish a mathematical model between the response value and various factors. The results showed that the intensity of effect of different influencing factor on polyphenols ex- traction rate ranked as microwave power＇s〉solid to liquid ratio＇s〉extraction time＇s〉 ethanol concentration＇s. The optimum microwave-assisted extraction conditions for polyphenols from L. chinense were as follows： extraction power 254 W, ethanol concentration 60%, extraction time 12.5 rain and solid to liquid ratio 1：17. Under the optimum extraction conditions, the extraction rate of polyphenols from L. chinense was 19.17%.

TLC Identification of Yao Medicine Pileostegia tomentellal and Extraction Technology and Content Determination of Umbelliferone

[Objectives]To establish a TLC and content determination method of Pileostegia tomentellal,with umbelliferone as the indicator component.[Methods]TLC identification was performed by silica gel G thin layer plate with n-hexane-ethyl acetate(4:3)as the developing agent,and the plate was examined by UV lamp(365 nm).The umbelliferone content was determined by HPLC:Inertsil ODS-3 C 18 column(4.60 mm×250 mm,5μm);mobile phase acetonitrile-0.2%phosphoric acid gradient elution;detection wavelength 320 nm,flow rate 1.0 mL/min,column temperature 30℃,injection volume 10μL.[Results]The chromatogram of P.tomentellal showed the same color spot in the same position as that of reference medicinal material,and the spot was clear with good specificity.Umbelliferone showed a good linear relationship when the injection volume was 2.63-131.27μg/mL(R^(2)=0.9997).The average recovery of umbelliferone in the low,middle and high adding groups of P.tomentellal was 99.57%and the RSD was 2.15%.[Conclusions]The method can effectively identify Yao medicine P.tomentellal and accurately determine the content of umbelliferone in medicinal materials,which will provide a scientific basis for the development and utilization of medicinal resources of Yao medicine P.tomentellal.

Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.

Research on Technology Development of Traditional Chinese Medicine Extraction Based on Patent Information

Objective To understand the development status of traditional Chinese medicine extraction technology,so as to provide a reference for enterprises and scientific research institutions to determine the direction of technological innovation.Besides,the government can formulate scientific and technological innovation strategies.Methods Based on patent information,statistical methods were applied to analyze the development of traditional Chinese medicine extraction technology.Then,the core technology was identified by constructing a patent citation network.Finally,the main path analysis method was applied to discover the technological evolution path.Results and Conclusion The extraction technology of traditional Chinese medicine is still in the growth stage.At present,its R&D is based on enterprises,supplemented by scientific research institutions.The core technologies are ultrasonic extraction and enzymatic extraction.The main path represented by enzymatic extraction technology reveals the evolution process of traditional Chinese medicine extraction technology.Based on this,relevant suggestions are put forward.Firstly,technological innovation cooperation should be strengthened to explore new models of achievement transformation and cooperation.Secondly,key enterprises of technology clusters should be cultivated to accelerate breakthroughs in core technologies.Thirdly,combined technologies can achieve high-efficiency enzyme-assisted extraction and open up new ways of extracting traditional Chinese medicine.Fourthly,traditional techniques should be improved to develop innovative modern techniques.

Extraction,chemical components,bioactive functions and adulteration identification of walnut oils:A review

Walnut oil is a functional wood oil known to researchers that may potentially be a large source of Chinese edible oils.There are various extraction methods for walnut oil,including traditional(pressing,solvent-and enzymeassisted extraction)and novel methods(microwave,ultrasound,supercritical CO_(2),subcritical and other extraction technologies).Walnut oil is rich in nutrients,including phytosterols,tocopherols,polyphenols,squalene and minerals.It provides many health benefits,such as antioxidant,antitumor,anti-inflammatory,antidiabetic and lipid metabolism-related functions.In addition,the authentication of walnut oil has received much research attention.The present review provides detailed research on walnut oil extraction,composition,health benefits and adulteration identification methods.The path toward further walnut oil improvement in the context of the market value of walnut oil is also discussed.

Optimization of Extraction Technology of Ellagic Acid from Pomegranate Peels with Orthogonal Experiment

[Objective] This study aimed to investigate the optimal condition for extrac- tion of ellagic acid from pomegranate peels. [Method] With ellagic acid yield as an indicator, ultrasound extraction method was adopted to extract the ellagic acid from pomegranate peels, and the concentration of ellagic acid was measured by using ul- traviolet spectrophotometry; L9（34） orthogonal experiment was designed with four fac- tors at three levels, to investigate the effect of extraction temperature, extraction du- ration, solid-liquid ratio and ultrasound power on extraction rate of ellagic acid. [Re- sult] The optimal extraction condition for ellagic acid is extraction temperature of 30 ~C, solid-liquid ratio of 1：200, extraction duration of 20 min, and ultrasound power of 50 W. The relationship between primary and secondary factors affecting experimental indicators was solid-liquid ratio 〉 extraction duration 〉 ultrasound power 〉 extraction temperature. [Conclusion] Solid-liquid ratio has the maximum effect on extraction rate of ellagic acid. The ellagic acid extraction technology identified in this study is rea- sonable and feasible.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Microwave-assisted extraction of polysaccharides from solanum nigrum

The microwave-assisted method was used to extract polysaccharides from solanum nigrum. The optimum experimental parameters, mechanism of the extraction and the effect of microwave-assisted extraction process on the structures of polysaccharides were investigated. The extract was analyzed by the modified phenol-sulfuric acid method at 490nm. The optimum experimental parameters were obtained by orthogonal experiments as follows: extraction time 15min, microwave radiation power 455W and the process ratio of materials mass to solvent volume 1∶20. The results show that compared with the conventional reflux extraction, the microwave-assisted extraction has a higher yield in shorter time, with no effect on the finally obtained polysaccharides as seen from the FT-IR spectra. The scanning electron microscopy images reveal that the mechanism of the extraction is related to the structural changes of the plant cells in different extracting conditions.

Microwave-assisted Extraction of Isoflavones from Belamcanda chinensis

Microwave-assisted extraction （MAE） of isoflavones from Belamcanda chinensis was studied using ethanol as the solvent. The single factor experiment and the orthogonal method were used to optimize the MAE condition. It was concluded that two doses of intermittent microwave power radiation, 300 W each for 4 rain, were needed for extraction. The mass ratio of solvent to material was 8：1 and the alcohol mass fraction was 80%. The extracted liquor was then concentrated under vacuum and degreased with petroleum ether. The yield of total isofiavones was about 8.8% and the contents of tectoridin and iridin were 67.6% and 16.3% respectively. Compared with direct-heating extraction （DHE）, MAE may shorten extracting duration, reduce solvent consumption, and improve yield and purity of isoflavones from Belamcanda chinensis.

Extraction Technology of Eight Botanical Pesticides and Their Antifungal Activities on Fungus

[ Objective] The optimum extraction technology of antifungal ingredients from eight medicinal plants such as coptis root and clove, etc. and their antifungal effects on two species of plant pathogens were studied. [ Method] The effective ingredients of medicinal plants were extracted by water, ethanol and acetone. The minimum inhibitory concentration （MIC） and antifungal rate of extracts from medicinal plants were determined using plate diluting method. [Resets] The optimum medicinal plants and the extraction methods inhibited two plant pathogens were as follows： clove extracted by ethanol and acetone, and cinnamon extracted by ethanol could be adopted to inhibit Fusarium oxysporum Schl., MIC at that mo- ment reached 4 mg/ml. Clove extracted by ethanol and acetone, and cinnamon extracted by ethanol could be adopted to inhibit the pathogen of Cistanche deserticola, MIC at that moment reached 4 mg/ml. [ Conclusion] The antifungal effects of ethanol and acetone extracts on tested patho- gens were obviously superior than that of aqueous extracts.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Microwave-assisted Extraction of Effective Compounds from Traditional Chinese Herbal Medicine Ciwujia

Microwave-assisted extraction (MAE) for active ingredients in Ciwujia was studied by using ethanol as the extractant. Comparing MAE with conventional methods, the former can save the extracting time and increase the content of the active ingredients in product. As to the operation in MAE, the continuous radiation process is more convenient for the extraction for traditional Chinese medicine than the intermittent radiation process. Optimized by uniform design, MAE was proved to be an effective and novel process for extracting active ingredients in Ciwujia. The optimized MAE conditions are as follows: the microwave power is 510W, the radiation time 30min, the alcohol concentration at 80%, the ratio of solvent to solid material being 5:1, the soaking time 0.5h, and the herbal particle size is (520±19)μm.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol（1∶15,v/v）for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Development trend and prospect of solid phase extraction technology

Solid phase extraction is widely used in sample pretreatment,concentration and analysis processes due to high selectivity and suitability for low concentration sample system.In this review,we systematically summarized and discussed the development trends of solid phase extraction by bibliometrics method.By analyzing papers output scale,the research and development direction of solid phase extraction technology is prospected.We also give an overview on current strategies of novel solid phase extraction from the separation medium and separation technology.The paper aims to describe the global research profile and the development trends of solid phase extraction,to help researchers to accurately grasp the research trend and to provide support for scientific research institutions to formulate scientific policies and strategic plans.Furthermore,the prospect of the development and application of solid phase extraction is also discussed.

Microwave-assisted extraction of Shenfu coal and its macromolecule structure

Coals consist of some molecules trapped within an organic matrix from which some organic compounds can be extracted by solvents. The Soxhlet technique has been widely used for extracting organic compounds. Microwave heating methods may be successfully applied in the field of coal science. Acetone extraction yields and the chemical composition of the extract were investigated using a typical Chinese coal, Shenfu coal, with microwave-assisted extraction. The acetone extract and residue were analyzed by GC/MS and carbon-13 nuclear magnetic resonance spectroscopy respectively. The carbon spectra were converted into several numerical parameters, fa, Ha, Xb, which indicate the difference in macromolecular structure between Shenfu coal and its residue. Furthermore, a hybrid genetic algorithm was employed using these parameters to approximate a coal macromolecule by assembling the structural fragments or functional groups into a large and complicated structure.

Microwave-assisted Micellar Extraction and Determination of Glycyrrhizic Acid and Liquiritin in Licorice Root by HPLC

The feasibility of emploving non-ionic surfactant （Triton X-100） as an alternative and effective solventfor the microwave-assisted extraction of glycyrrhizic acid （GA） and liquiritin （LQ） from licorice root was studied.The optimal extraction parameters based on the microwave-assisted micellar extraction technique were determined.Under the optimal conditions, i.e. 5% （by volume） Triton X-100, microwave-assisted extraction for 3--5min at 373K, the percentage extraction of active ingredients reached the highest value. The preconcentration tactor for GA and L＇Q （about 13.5） and the extraction efficiency for these two ingredients approached 100% showed the coupling of microwave-assisted extraction and cloud-point extraction could be employed as a new and. effective techniquefor the rapid extraction and preconcentration of pharrnacologically active ingredients from medicinal plants SUCh aslicorice root without disturbing chromatographic analysis.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.

Dynamic microwave-assisted extraction combined with liquid phase microextraction based on the solidification of a floating drop for the analysis of organochlorine pesticides in grains followed by GC

A convenient,cost-effective and fast method using dynamic microwave-assisted extraction and liquid phase microextraction based on the solidification of a floating drop was proposed to analyze organochlorine pesticides in grains including rice,maize and millet.Twelve samples can be processed simultaneously in the method.During the extraction process,10%acetonitrile-water solutions containing 110μL of n-hexadecane were used to extract organochlorine pesticides.Subsequently,1.0 g sodium chloride was placed in the extract,and then centrifuged and cooled.The n-hexadecane drops containing the analytes were solidifi ed and transferred for determination by gas chromatography-electron capture detector without any further filtration or cleaning process.Limits of detection for organochlorine pesticides were 0.97–1.01μg/kg and the RSDs were in the range of 2.6%–8.5%.The developed technology has succeeded in analyzing six real grains samples and the recoveries of the organochlorine pesticides were 72.2%–94.3%.Compared with the published extraction methods,the developed method was used to analyze organochlorine pesticides in grains,being more environmentally friendly,which is suitable for the daily determination of organochlorine pesticides.

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.