Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000...Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.展开更多
Objective:To prepare a novel biodegradable poly(2-hydroxyethylmethacrilate)(pHEMAt hydrogel as tissue engineering scaffold.Methods:The pHEMA hydrogel was synthesized by microwaveassisted polymerization using 2-hydroxy...Objective:To prepare a novel biodegradable poly(2-hydroxyethylmethacrilate)(pHEMAt hydrogel as tissue engineering scaffold.Methods:The pHEMA hydrogel was synthesized by microwaveassisted polymerization using 2-hydroxyethyl methacrylale(IIEMA)as the raw material,potassium persulfate as the initiator,and PCI.X as the cross-linking additive.The hvdrogels was characterized with FTIR and NMR spectroscopy.The physical and chemical properties of the prepared hydrogel were evaluated,and its degradation performance was tested.The cytotoxicity of the optimum composite hydrogel was measured by an MTT assay to confirm the feasibility of its use in tissue engineering.Results:The optimum conditions under which the hydrogel was prepared by microwave-assisted polymerization are as follows:1.5 g cross-linking additive,0.3 g initiator,reaction temperature of 80°C,and microwave power of 800 W.Degradation studies showed good degradation profiles with 75%in 17 days.Additionally,the hydrogels did not elicit any cytotoxic response in in vitro cytotoxic assays.Conclusion:A biodegradable pIIEMA hydrogel was successfully prepared by microwave-assisted polymerization,as confirmed from FTIR and NMR results.The hydrogel shows promising applications in tissue engineering,and its healing ability and biocompatibilily will be evaluated in detail in the future.展开更多
Poly(e-caprolactone) (PCL) with weight-average molar mass over 10000 g/mol was synthesized by microwave-assisted ring-opening polymerization of e-caprolactone (e-CL) with maleic acid (MA) as initiator (2.45 GHz, 360 W...Poly(e-caprolactone) (PCL) with weight-average molar mass over 10000 g/mol was synthesized by microwave-assisted ring-opening polymerization of e-caprolactone (e-CL) with maleic acid (MA) as initiator (2.45 GHz, 360 W, 85 min). Ibuprofen-PCL controlled release system was prepared directly by the ROP of e-CL in its mixture with ibuprofen. The release of ibuprofen from the system was sustained and steady.展开更多
This work demonstrates a novel polymerization-derived polymer electrolyte consisting of methyl methacrylate,lithium bis(trifluoromethanesulfonyl)imide and fluoroethylene carbonate.The polymerization of MMA was initiat...This work demonstrates a novel polymerization-derived polymer electrolyte consisting of methyl methacrylate,lithium bis(trifluoromethanesulfonyl)imide and fluoroethylene carbonate.The polymerization of MMA was initiated by the amino compounds following an anionic catalytic mechanism.LiTFSI plays both roles including the initiator and Li ion source in the polymer electrolyte.Normally,lithium bis(trifluoromethanesulfonyl)imide has difficulty in initiating the polymerization reaction of methyl methacrylate monomer,a very high concentration of lithium bis(trifluoromethanesulfonyl)imide is needed for initiating the polymerization.However,the fluoroethylene carbonate additive can work as a supporter to facilitate the degree of dissociation of lithium bis(trifluoromethanesulfonyl)imide and increase its initiator capacity due to the high dielectric constant.The as-prepared poly-methyl methacrylate-based polymer electrolyte has a high ionic conductivity(1.19×10^(−3)S cm^(−1)),a wide electrochemical stability window(5 V vs Li^(+)/Li),and a high Li ion transference number(t_(Li^(+)))of 0.74 at room temperature(RT).Moreover,this polymerization-derived polymer electrolyte can effectively work as an artificial protective layer on Li metal anode,which enabled the Li symmetric cell to achieve a long-term cycling performance at 0.2 mAh cm^(−2)for 2800 h.The LiFePO_(4)battery with polymerization-derived polymer electrolyte-modified Li metal anode shows a capacity retention of 91.17%after 800 cycles at 0.5 C.This work provides a facile and accessible approach to manufacturing poly-methyl methacrylate-based polymerization-derived polymer electrolyte and shows great potential as an interphase in Li metal batteries.展开更多
End-functionalization of polydiene rubbers can not only improve its compatibility with inorganic fillers,but also enhance the overall mechanical properties.Nevertheless,for traditional neodymium(Nd)diene polymerizatio...End-functionalization of polydiene rubbers can not only improve its compatibility with inorganic fillers,but also enhance the overall mechanical properties.Nevertheless,for traditional neodymium(Nd)diene polymerization systems,it is highly challenging to achieve such end-functionalizations,because most of polydienyl chains are capped withη3-allyl-Nd moiety during the end of polymerization,which shows very poor reactivity with nucleophile compounds.We launched a new diene polymerization strategy calling coordinative chain transfer polymerization(CCTP)[1].In such a system,all the polydienyl chains are capped withη1-allyl-Al moieties,which reveal greater reactivity with cyclic esters and epoxide compounds,providing an effective manner to prepare polydiene-polyester amphiphilic block copolymers.Inspired by such findings,we now show herein how such types of chain-ends react with isot-hiocyanate to demonstrate an efficient in-situ manner to access end-functionalized polydienes by using CCTP.展开更多
Neodymium(Nd)-based catalyst in butadiene(Bd)polymerization has drawn interests due to its availability in affording higher cis-1,4-unit selectivity than transition metal(Ti,Co,Ni,etc.)-based catalysts[1-2].Such outst...Neodymium(Nd)-based catalyst in butadiene(Bd)polymerization has drawn interests due to its availability in affording higher cis-1,4-unit selectivity than transition metal(Ti,Co,Ni,etc.)-based catalysts[1-2].Such outstanding high cis-1,4-unit selecti-vity is hypothetically originated from the presence of 4 f orbitals,that can participate in monomer coordination and thereby govern subsequent enchainment manners.This unique characteristic also renders the active species highly susceptible to Lewis bases,and may impact the overall selectivity as well as polyme-rization behavior after coordination.Nevertheless,it is still a virgin area in such a field,and the influence of Lewis bases on Nd-based diene polymerizations is still a black box.Based on this consideration,how nitrogen-containing donors(D)impacts the overall behaviors of Nd-mediated Bd polymerizations is disclosed.展开更多
This paper describes mass-based energy phase-space projection of microwave-assisted synthesis of transition metals (zinc oxide, palladium, silver, platinum, and gold) nanostructures. The projection uses process energy...This paper describes mass-based energy phase-space projection of microwave-assisted synthesis of transition metals (zinc oxide, palladium, silver, platinum, and gold) nanostructures. The projection uses process energy budget (measured in kJ) on the horizontal axes and process density (measured in kJg−1) on the vertical axes. These two axes allow both mass usage efficiency (Environmental-Factor) and energy efficiency to be evaluated for a range of microwave applicator and metal synthesis. The metrics are allied to the: second, sixth and eleventh principle of the twelve principle of Green Chemistry. This analytical approach to microwave synthesis (widely considered as a useful Green Chemistry energy source) allows a quantified dynamic environmental quotient to be given to renewable plant-based biomass associated with the reduction of the metal precursors. Thus allowing a degree of quantification of claimed “eco-friendly” and “sustainable” synthesis with regard to waste production and energy usage.展开更多
α-Diimide catalysts have attracted widespread attention due to their unique chain walking characteristics.A series ofα-diimide nickel/palladium catalysts with different electronic effects and steric hindrances were ...α-Diimide catalysts have attracted widespread attention due to their unique chain walking characteristics.A series ofα-diimide nickel/palladium catalysts with different electronic effects and steric hindrances were designed and synthesized for olefin polymerization.In this work,we synthesized a series of asymmetricα-diimide nickel complexes with different steric hindrances and used them for ethylene polymerization.These nickel catalysts have high ethylene polymerization activity,up to 6.51×10^(6)g·mol^(−1)·h^(−1),and the prepared polyethylene has a moderate melting point and high molecular weight(up to 38.2×10^(4)g·mol^(−1)),with a branching density distribution between 7 and 94 branches per 1000 carbons.More importantly,the polyethylene prepared by these catalysts exhibits excellent tensile properties,with strain and stress reaching 800%and 30 MPa,respectively.展开更多
The tireless pursuit of supercapacitors with high energy density entails the parallel advancement of wellsuited electrode materials and elaborately engineered architectures.Polypyrrole(PPy)emerges as an exceedingly co...The tireless pursuit of supercapacitors with high energy density entails the parallel advancement of wellsuited electrode materials and elaborately engineered architectures.Polypyrrole(PPy)emerges as an exceedingly conductive polymer and a prospective pseudocapacitive materials for supercapacitors,yet the inferior cyclic stability and unpredictable polymerization patterns severely impede its real-world applicability.Here,for the first time,an innovative seed-induced in-situ polymerization assisted 3D printing strategy is proposed to fabricate PPy-reduced graphene oxide/poly(vinylidene difluoride-cohexafluoropropylene)(PVDF-HFP)(PPy-rGO/PH)electrodes with controllable polymerization behavior and exceptional areal mass loading.The preferred active sites uniformly pre-planted on the 3D-printed graphene substrates serve as reliable seeds to induce efficient polypyrrole deposition,achieving an impressive mass loading of 185.6 mg cm^(-2)(particularly 79.2 mg cm^(-2)for polypyrrole)and a superior areal capacitance of 25.2 F cm^(-2)at 2 mA cm^(-2)for a 12-layer electrode.In agreement with theses appealing features,an unprecedented areal energy density of 1.47 mW h cm^(-2)for a symmetrical device is registered,a rarely achieved value for other PPy/rGO-based supercapacitors.This work highlights a promising route to preparing high energy density energy storage modules for real-world applications.展开更多
Optical imaging systems have greatly extended human visual capabilities,enabling the observation and understanding of diverse phenomena.Imaging technologies span a broad spectrum of wavelengths from x-ray to radio fre...Optical imaging systems have greatly extended human visual capabilities,enabling the observation and understanding of diverse phenomena.Imaging technologies span a broad spectrum of wavelengths from x-ray to radio frequencies and impact research activities and our daily lives.Traditional glass lenses are fabricated through a series of complex processes,while polymers offer versatility and ease of production.However,modern applications often require complex lens assemblies,driving the need for miniaturization and advanced designs with micro-and nanoscale features to surpass the capabilities of traditional fabrication methods.Three-dimensional(3D)printing,or additive manufacturing,presents a solution to these challenges with benefits of rapid prototyping,customized geometries,and efficient production,particularly suited for miniaturized optical imaging devices.Various 3D printing methods have demonstrated advantages over traditional counterparts,yet challenges remain in achieving nanoscale resolutions.Two-photon polymerization lithography(TPL),a nanoscale 3D printing technique,enables the fabrication of intricate structures beyond the optical diffraction limit via the nonlinear process of two-photon absorption within liquid resin.It offers unprecedented abilities,e.g.alignment-free fabrication,micro-and nanoscale capabilities,and rapid prototyping of almost arbitrary complex 3D nanostructures.In this review,we emphasize the importance of the criteria for optical performance evaluation of imaging devices,discuss material properties relevant to TPL,fabrication techniques,and highlight the application of TPL in optical imaging.As the first panoramic review on this topic,it will equip researchers with foundational knowledge and recent advancements of TPL for imaging optics,promoting a deeper understanding of the field.By leveraging on its high-resolution capability,extensive material range,and true 3D processing,alongside advances in materials,fabrication,and design,we envisage disruptive solutions to current challenges and a promising incorporation of TPL in future optical imaging applications.展开更多
Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to ...Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to study its effect on the oxidation resistance, apparent porosity, bulk density, elastic modulus, and modulus of rupture. It is found that Al_(4)SiC_(4) can be synthesized by microwave sintering at 1 300 ℃ and the addition of Al_(4)SiC_(4)-containing material as an antioxidant can enhance the oxidation resistance of the magnesia carbon refractory brick.展开更多
For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of sol...For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic modeling.In terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent molecules.Furthermore,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate coefficient.Counterintuitively,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic modeling.It is found that in benzene and n-pentane,the polymerization rate exhibits first-order kinetics.While,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.展开更多
The catalysis of olefin polymerization through the chain-walking process is a subject of great interest. In this contribution, the successful synthesis of a Brookhart-type unsymmetrical α-diimine nickel catalyst Ni, ...The catalysis of olefin polymerization through the chain-walking process is a subject of great interest. In this contribution, the successful synthesis of a Brookhart-type unsymmetrical α-diimine nickel catalyst Ni, which contains both dibenzhydryl and phenyl groups, was determined by X-ray crystallography. The compound has a pseudo-tetrahedral geometry at the Ni center, showing pseudo-C2-symmetry. Upon activation with modified methylaluminoxane (MMAO), Ni1 exhibits high catalytic activity up to 1.02 × 107 g PE (mol Ni h)−1 toward ethylene polymerization, enabling the synthesis of high molecular weight branched polyethylene. The molecular weights and branching densities could be tuned over a very wide range. The polymerization results indicated the possibility of precise microstructure control, depending on the polymerization temperature. The branching densities were decreased with increasing the polymerization temperature.展开更多
A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The sa...A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.展开更多
Serials of polystyrene/SiO<sub>2</sub> Nano composites (PS/SiO<sub>2</sub>) with different content of inorganic fillers were successfully prepared by the in situ bulk radical polymerization of ...Serials of polystyrene/SiO<sub>2</sub> Nano composites (PS/SiO<sub>2</sub>) with different content of inorganic fillers were successfully prepared by the in situ bulk radical polymerization of styrene under microwave irradiation. The effect of the amount of Nano SiO<sub>2</sub> on the properties of the PS/SiO<sub>2</sub> Nanocomposites along with the average relative molecular masses (Mn, Mz and Mw) was investigated by thermal analysis and X-Ray Diffraction (XRD). Their structural model was proposed on the basis of the Optical Microscopy, FTIR (Fourier Transform Infrared) analysis, differential scanning calorimetry (DSC), gel permeation chromatography (GPC) and X-Ray Diffraction (XRD). The dispersion of nanoparticles in Polystyrene is observed in the magnified image. The effect of microwave irradiation power on molecular weight of polystyrene was also studied. It was found that, the microwave assisted reaction needs less time as compare to conventional polymerization and found to be in between 10 to 15 min.展开更多
Microwave heating contributes to coal fracturing and gas desorption. However, problems of low penetration depth, local overheating and fracture closure exist. Coal demineralisation by acids has advantages in coal unbl...Microwave heating contributes to coal fracturing and gas desorption. However, problems of low penetration depth, local overheating and fracture closure exist. Coal demineralisation by acids has advantages in coal unblocking and permeability improvement, while it is difficult for acid to enter microcracks.Microwave-asisted acidification may offer an alternative. In this work, XRD,^(1)H-NMR, and SEM were used to evaluate the effect of microwave-assisted acidification on the microstructure of coal. Results show that kaolinite, calcite, and dolomite can be dissolved by acid. After microwave irradiation, the graphitization of microcrystalline structure of carbon improves. Microwave-assisted acidification erodes minerals in coal and enhances the graphitization degree of microcrystalline structure. Compared to individual microwave irradiation or acidification, the pore volume and pore connectivity can be greatly enhanced by microwave-assisted acidification. The NMR permeability of coal increased by 28.05%. This study demonstrates the potential of microwave-assisted acidification for coalbed methane recovery.展开更多
The construction of a homojunction is an effective approach for addressing issues such as slow charge separation and charge-transfer kinetics in photoanodes.In the present work,we designed a gradient Si-and Ti-doped F...The construction of a homojunction is an effective approach for addressing issues such as slow charge separation and charge-transfer kinetics in photoanodes.In the present work,we designed a gradient Si-and Ti-doped Fe_(2)O_(3) homojunction photoanode to improve the photoelectrochemical(PEC)performance of a Ti-doped Fe_(2)O_(3) photoanode.Ti-FeOOH nanocorals were synthesized using a hydrothermal process,and Si-FeOOH was grown on Ti-FeOOH nanocorals using a rapid and facile microwaveassisted(MW)technique.By varying the MW irradiation time,the thickness of the Si/Ti:Fe_(2)O_(3) photoanode was adjusted and an optimized 3-Si/Ti:Fe_(2)O_(3) photoelectrode was achieved with a significantly enhanced photocurrent density(1.37 mA cm^(-2) at 1.23 V vs.RHE)and a cathodic shift of the onset potential(150 mV)compared with that of bare Ti-Fe_(2)O_(3).This enhanced PEC performance can be ascribed to homojunction formation and Si gradient doping.The Si dopant increased the donor concentration and the formation of a homojunction improved the intrinsic built-in electric field,thereby promoting charge separation and charge transfer.Furthermore,the as-formed homojunction passivated the surfacetrapping states,consequently improving the charge transfer efficiency(60%at 1.23 VRHE)at the photoanode/electrolyte interface.These findings could pave the way for the microwave-assisted fabrication of diverse efficient homojunction photoanodes for PEC water splitting applications.展开更多
The solvent-free in situ polymerization technique has the potential to tailor-make conformal interfaces that are essential for developing durable and safe lithium metal polymer batteries(LMPBs).Hence,much attention ha...The solvent-free in situ polymerization technique has the potential to tailor-make conformal interfaces that are essential for developing durable and safe lithium metal polymer batteries(LMPBs).Hence,much attention has been given to the eco-friendly and rapid ultraviolet(UV)-induced in situ photopolymerization process to prepare solid-state polymer electrolytes.In this respect,an innovative method is proposed here to overcome the challenges of UV-induced photopolymerization(UV-curing)in the zones where UV-light cannot penetrate,especially in LMPBs where thick electrodes are used.The proposed frontal-inspired photopolymerization(FIPP)process is a diverged frontal-based technique that uses two classes(dual)of initiators to improve the slow reaction kinetics of allyl-based monomers/oligomers by at least 50%compared with the conventional UV-curing process.The possible reaction mechanism occurring in FIPP is demonstrated using density functional theory calculations and spectroscopic investigations.Indeed,the initiation mechanism identified for the FIPP relies on a photochemical pathway rather than an exothermic propagating front forms during the UV-irradiation step as the case with the classical frontal photopolymerization technique.Besides,the FIPP-based in situ cell fabrication using dual initiators is advantageous over both the sandwich cell assembly and conventional in situ photopolymerization in overcoming the limitations of mass transport and active material utilization in high energy and high power LMPBs that use thick electrodes.Furthermore,the LMPB cells fabricated using the in situ-FIPP process with high mass loading LiFePO_(4)electrodes(5.2 mg cm^(-2))demonstrate higher rate capability,and a 50%increase in specific capacity against a sandwich cell encouraging the use of this innovative process in large-scale solid-state battery production.展开更多
Topochemical reactions are a promising method to obtain crystalline polymeric materials with distance-determined regio-or stereoselectivity.It has been concluded on an empirical basis that the closest intermolecular C...Topochemical reactions are a promising method to obtain crystalline polymeric materials with distance-determined regio-or stereoselectivity.It has been concluded on an empirical basis that the closest intermolecular C⋅⋅⋅C distance in crystals of alkynes,d(C⋅⋅⋅C)min,should reach a threshold of∼3Åfor bonding to occur at room temperature.To understand this empirical threshold,we study here the polymerization of acetylene in the crystalline state under high pressure by calculating the structural geometry,vibrational modes,and reaction profile.We find d(C⋅⋅⋅C)min to be the sum of an intrinsic threshold of 2.3Åand a thermal displacement of 0.8Å(at room temperature).Molecules at the empirical threshold move via several phonon modes to reach the intrinsic threshold,at which the intermolecular electronic interaction is sharply enhanced and bonding commences.A distance–vibration-based reaction picture is thus demonstrated,which provides a basis for the prediction and design of topochemical reactions,as well as an enhanced understanding of the bonding process in solids.展开更多
There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet ...There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.展开更多
文摘Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.
基金supported by the National Natural Science Foundation of Hainan Province(Grant No.812200)
文摘Objective:To prepare a novel biodegradable poly(2-hydroxyethylmethacrilate)(pHEMAt hydrogel as tissue engineering scaffold.Methods:The pHEMA hydrogel was synthesized by microwaveassisted polymerization using 2-hydroxyethyl methacrylale(IIEMA)as the raw material,potassium persulfate as the initiator,and PCI.X as the cross-linking additive.The hvdrogels was characterized with FTIR and NMR spectroscopy.The physical and chemical properties of the prepared hydrogel were evaluated,and its degradation performance was tested.The cytotoxicity of the optimum composite hydrogel was measured by an MTT assay to confirm the feasibility of its use in tissue engineering.Results:The optimum conditions under which the hydrogel was prepared by microwave-assisted polymerization are as follows:1.5 g cross-linking additive,0.3 g initiator,reaction temperature of 80°C,and microwave power of 800 W.Degradation studies showed good degradation profiles with 75%in 17 days.Additionally,the hydrogels did not elicit any cytotoxic response in in vitro cytotoxic assays.Conclusion:A biodegradable pIIEMA hydrogel was successfully prepared by microwave-assisted polymerization,as confirmed from FTIR and NMR results.The hydrogel shows promising applications in tissue engineering,and its healing ability and biocompatibilily will be evaluated in detail in the future.
基金This work was financially supported by the Research Foundation of MOE and National 973 Project of China (G1999064703).
文摘Poly(e-caprolactone) (PCL) with weight-average molar mass over 10000 g/mol was synthesized by microwave-assisted ring-opening polymerization of e-caprolactone (e-CL) with maleic acid (MA) as initiator (2.45 GHz, 360 W, 85 min). Ibuprofen-PCL controlled release system was prepared directly by the ROP of e-CL in its mixture with ibuprofen. The release of ibuprofen from the system was sustained and steady.
基金funded by the National Key Research and Development Program of China(no.2020YFC1909604)Shenzhen Key Projects of Technological Research(JSGG20200925145800001)Shenzhen Basic Research Project(no.JCYJ20190808145203535).
文摘This work demonstrates a novel polymerization-derived polymer electrolyte consisting of methyl methacrylate,lithium bis(trifluoromethanesulfonyl)imide and fluoroethylene carbonate.The polymerization of MMA was initiated by the amino compounds following an anionic catalytic mechanism.LiTFSI plays both roles including the initiator and Li ion source in the polymer electrolyte.Normally,lithium bis(trifluoromethanesulfonyl)imide has difficulty in initiating the polymerization reaction of methyl methacrylate monomer,a very high concentration of lithium bis(trifluoromethanesulfonyl)imide is needed for initiating the polymerization.However,the fluoroethylene carbonate additive can work as a supporter to facilitate the degree of dissociation of lithium bis(trifluoromethanesulfonyl)imide and increase its initiator capacity due to the high dielectric constant.The as-prepared poly-methyl methacrylate-based polymer electrolyte has a high ionic conductivity(1.19×10^(−3)S cm^(−1)),a wide electrochemical stability window(5 V vs Li^(+)/Li),and a high Li ion transference number(t_(Li^(+)))of 0.74 at room temperature(RT).Moreover,this polymerization-derived polymer electrolyte can effectively work as an artificial protective layer on Li metal anode,which enabled the Li symmetric cell to achieve a long-term cycling performance at 0.2 mAh cm^(−2)for 2800 h.The LiFePO_(4)battery with polymerization-derived polymer electrolyte-modified Li metal anode shows a capacity retention of 91.17%after 800 cycles at 0.5 C.This work provides a facile and accessible approach to manufacturing poly-methyl methacrylate-based polymerization-derived polymer electrolyte and shows great potential as an interphase in Li metal batteries.
基金Supported by PetroChina Company Limited(2020 B-2711)。
文摘End-functionalization of polydiene rubbers can not only improve its compatibility with inorganic fillers,but also enhance the overall mechanical properties.Nevertheless,for traditional neodymium(Nd)diene polymerization systems,it is highly challenging to achieve such end-functionalizations,because most of polydienyl chains are capped withη3-allyl-Nd moiety during the end of polymerization,which shows very poor reactivity with nucleophile compounds.We launched a new diene polymerization strategy calling coordinative chain transfer polymerization(CCTP)[1].In such a system,all the polydienyl chains are capped withη1-allyl-Al moieties,which reveal greater reactivity with cyclic esters and epoxide compounds,providing an effective manner to prepare polydiene-polyester amphiphilic block copolymers.Inspired by such findings,we now show herein how such types of chain-ends react with isot-hiocyanate to demonstrate an efficient in-situ manner to access end-functionalized polydienes by using CCTP.
基金Supported by PetroChina Company Limited Project (2020 B-2711)。
文摘Neodymium(Nd)-based catalyst in butadiene(Bd)polymerization has drawn interests due to its availability in affording higher cis-1,4-unit selectivity than transition metal(Ti,Co,Ni,etc.)-based catalysts[1-2].Such outstanding high cis-1,4-unit selecti-vity is hypothetically originated from the presence of 4 f orbitals,that can participate in monomer coordination and thereby govern subsequent enchainment manners.This unique characteristic also renders the active species highly susceptible to Lewis bases,and may impact the overall selectivity as well as polyme-rization behavior after coordination.Nevertheless,it is still a virgin area in such a field,and the influence of Lewis bases on Nd-based diene polymerizations is still a black box.Based on this consideration,how nitrogen-containing donors(D)impacts the overall behaviors of Nd-mediated Bd polymerizations is disclosed.
文摘This paper describes mass-based energy phase-space projection of microwave-assisted synthesis of transition metals (zinc oxide, palladium, silver, platinum, and gold) nanostructures. The projection uses process energy budget (measured in kJ) on the horizontal axes and process density (measured in kJg−1) on the vertical axes. These two axes allow both mass usage efficiency (Environmental-Factor) and energy efficiency to be evaluated for a range of microwave applicator and metal synthesis. The metrics are allied to the: second, sixth and eleventh principle of the twelve principle of Green Chemistry. This analytical approach to microwave synthesis (widely considered as a useful Green Chemistry energy source) allows a quantified dynamic environmental quotient to be given to renewable plant-based biomass associated with the reduction of the metal precursors. Thus allowing a degree of quantification of claimed “eco-friendly” and “sustainable” synthesis with regard to waste production and energy usage.
基金supported by the National Natural Science Foundation of China(52203016)the USTC Research Funds of the Double First-Class Initiative(YD9990002018)+3 种基金the Overseas Students Innovation and Entrepreneurship Support Program Project of Anhui Province(2021LCX022)the Key R&D Projects in Anhui Province(2022i01020012)the Natural Science Foundation of Hefei(2022039)the Excellent Research and Innovation Team Project of Anhui Province(2022AH010001).
文摘α-Diimide catalysts have attracted widespread attention due to their unique chain walking characteristics.A series ofα-diimide nickel/palladium catalysts with different electronic effects and steric hindrances were designed and synthesized for olefin polymerization.In this work,we synthesized a series of asymmetricα-diimide nickel complexes with different steric hindrances and used them for ethylene polymerization.These nickel catalysts have high ethylene polymerization activity,up to 6.51×10^(6)g·mol^(−1)·h^(−1),and the prepared polyethylene has a moderate melting point and high molecular weight(up to 38.2×10^(4)g·mol^(−1)),with a branching density distribution between 7 and 94 branches per 1000 carbons.More importantly,the polyethylene prepared by these catalysts exhibits excellent tensile properties,with strain and stress reaching 800%and 30 MPa,respectively.
基金financially supported by the National Natural Science Foundation of China(No.51933007,No.52373047,No.52302106)the Sichuan Youth Science and Technology Innovation Research Team Project(No.2022JDTD0012)+2 种基金the Program for Featured Directions of Engineering Multidisciplines of Sichuan University(No.2020SCUNG203)the Natural Science Foundation of Sichuan Province(No.2023NSFSC0418)the Program for State Key Laboratory of Polymer Materials Engineering(No.sklpme2022-3-10)。
文摘The tireless pursuit of supercapacitors with high energy density entails the parallel advancement of wellsuited electrode materials and elaborately engineered architectures.Polypyrrole(PPy)emerges as an exceedingly conductive polymer and a prospective pseudocapacitive materials for supercapacitors,yet the inferior cyclic stability and unpredictable polymerization patterns severely impede its real-world applicability.Here,for the first time,an innovative seed-induced in-situ polymerization assisted 3D printing strategy is proposed to fabricate PPy-reduced graphene oxide/poly(vinylidene difluoride-cohexafluoropropylene)(PVDF-HFP)(PPy-rGO/PH)electrodes with controllable polymerization behavior and exceptional areal mass loading.The preferred active sites uniformly pre-planted on the 3D-printed graphene substrates serve as reliable seeds to induce efficient polypyrrole deposition,achieving an impressive mass loading of 185.6 mg cm^(-2)(particularly 79.2 mg cm^(-2)for polypyrrole)and a superior areal capacitance of 25.2 F cm^(-2)at 2 mA cm^(-2)for a 12-layer electrode.In agreement with theses appealing features,an unprecedented areal energy density of 1.47 mW h cm^(-2)for a symmetrical device is registered,a rarely achieved value for other PPy/rGO-based supercapacitors.This work highlights a promising route to preparing high energy density energy storage modules for real-world applications.
基金support from the National Research Foundation (NRF) Singapore, under its Competitive Research Programme Award NRF-CRP20-20170004 and NRF Investigatorship Award NRF-NRFI06-20200005MTC Programmatic Grant M21J9b0085, as well as the Lite-On Project RS-INDUS-00090+5 种基金support from Australian Research Council (DE220101085, DP220102152)grants from German Research Foundation (SCHM2655/15-1, SCHM2655/21-1)Lee-Lucas Chair in Physics and funding by the Australian Research Council DP220102152financial support from the National Natural Science Foundation of China (Grant No. 62275078)Natural Science Foundation of Hunan Province of China (Grant No. 2022JJ20020)Shenzhen Science and Technology Program (Grant No. JCYJ20220530160405013)
文摘Optical imaging systems have greatly extended human visual capabilities,enabling the observation and understanding of diverse phenomena.Imaging technologies span a broad spectrum of wavelengths from x-ray to radio frequencies and impact research activities and our daily lives.Traditional glass lenses are fabricated through a series of complex processes,while polymers offer versatility and ease of production.However,modern applications often require complex lens assemblies,driving the need for miniaturization and advanced designs with micro-and nanoscale features to surpass the capabilities of traditional fabrication methods.Three-dimensional(3D)printing,or additive manufacturing,presents a solution to these challenges with benefits of rapid prototyping,customized geometries,and efficient production,particularly suited for miniaturized optical imaging devices.Various 3D printing methods have demonstrated advantages over traditional counterparts,yet challenges remain in achieving nanoscale resolutions.Two-photon polymerization lithography(TPL),a nanoscale 3D printing technique,enables the fabrication of intricate structures beyond the optical diffraction limit via the nonlinear process of two-photon absorption within liquid resin.It offers unprecedented abilities,e.g.alignment-free fabrication,micro-and nanoscale capabilities,and rapid prototyping of almost arbitrary complex 3D nanostructures.In this review,we emphasize the importance of the criteria for optical performance evaluation of imaging devices,discuss material properties relevant to TPL,fabrication techniques,and highlight the application of TPL in optical imaging.As the first panoramic review on this topic,it will equip researchers with foundational knowledge and recent advancements of TPL for imaging optics,promoting a deeper understanding of the field.By leveraging on its high-resolution capability,extensive material range,and true 3D processing,alongside advances in materials,fabrication,and design,we envisage disruptive solutions to current challenges and a promising incorporation of TPL in future optical imaging applications.
基金This work was funded by Luoyang Major Science and Technology Innovation Project(2301009A)Henan Province Key Research and Development Project(231111230200)。
文摘Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to study its effect on the oxidation resistance, apparent porosity, bulk density, elastic modulus, and modulus of rupture. It is found that Al_(4)SiC_(4) can be synthesized by microwave sintering at 1 300 ℃ and the addition of Al_(4)SiC_(4)-containing material as an antioxidant can enhance the oxidation resistance of the magnesia carbon refractory brick.
基金financially supported by the National Natural Science Foundation of China(U21A20313,22222807)。
文摘For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic modeling.In terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent molecules.Furthermore,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate coefficient.Counterintuitively,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic modeling.It is found that in benzene and n-pentane,the polymerization rate exhibits first-order kinetics.While,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.
文摘The catalysis of olefin polymerization through the chain-walking process is a subject of great interest. In this contribution, the successful synthesis of a Brookhart-type unsymmetrical α-diimine nickel catalyst Ni, which contains both dibenzhydryl and phenyl groups, was determined by X-ray crystallography. The compound has a pseudo-tetrahedral geometry at the Ni center, showing pseudo-C2-symmetry. Upon activation with modified methylaluminoxane (MMAO), Ni1 exhibits high catalytic activity up to 1.02 × 107 g PE (mol Ni h)−1 toward ethylene polymerization, enabling the synthesis of high molecular weight branched polyethylene. The molecular weights and branching densities could be tuned over a very wide range. The polymerization results indicated the possibility of precise microstructure control, depending on the polymerization temperature. The branching densities were decreased with increasing the polymerization temperature.
文摘A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.
文摘Serials of polystyrene/SiO<sub>2</sub> Nano composites (PS/SiO<sub>2</sub>) with different content of inorganic fillers were successfully prepared by the in situ bulk radical polymerization of styrene under microwave irradiation. The effect of the amount of Nano SiO<sub>2</sub> on the properties of the PS/SiO<sub>2</sub> Nanocomposites along with the average relative molecular masses (Mn, Mz and Mw) was investigated by thermal analysis and X-Ray Diffraction (XRD). Their structural model was proposed on the basis of the Optical Microscopy, FTIR (Fourier Transform Infrared) analysis, differential scanning calorimetry (DSC), gel permeation chromatography (GPC) and X-Ray Diffraction (XRD). The dispersion of nanoparticles in Polystyrene is observed in the magnified image. The effect of microwave irradiation power on molecular weight of polystyrene was also studied. It was found that, the microwave assisted reaction needs less time as compare to conventional polymerization and found to be in between 10 to 15 min.
基金supported by the National Natural Science Foundation of China (Nos. 52274195, 52274196, 51904103, and 52174180)the Science and Technology Innovation Program of Hunan Province (No. 2022RC1178)+1 种基金Hunan Provincial Natural Science Foundation of China (Nos. 2022JJ20024, and 2021JJ30254)Scientific Research Foundation of Hunan Provincial Education Department (No. 21B0465)。
文摘Microwave heating contributes to coal fracturing and gas desorption. However, problems of low penetration depth, local overheating and fracture closure exist. Coal demineralisation by acids has advantages in coal unblocking and permeability improvement, while it is difficult for acid to enter microcracks.Microwave-asisted acidification may offer an alternative. In this work, XRD,^(1)H-NMR, and SEM were used to evaluate the effect of microwave-assisted acidification on the microstructure of coal. Results show that kaolinite, calcite, and dolomite can be dissolved by acid. After microwave irradiation, the graphitization of microcrystalline structure of carbon improves. Microwave-assisted acidification erodes minerals in coal and enhances the graphitization degree of microcrystalline structure. Compared to individual microwave irradiation or acidification, the pore volume and pore connectivity can be greatly enhanced by microwave-assisted acidification. The NMR permeability of coal increased by 28.05%. This study demonstrates the potential of microwave-assisted acidification for coalbed methane recovery.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(NRF-2021R1A2C1095669 and NRF-2021R1F1A104936)。
文摘The construction of a homojunction is an effective approach for addressing issues such as slow charge separation and charge-transfer kinetics in photoanodes.In the present work,we designed a gradient Si-and Ti-doped Fe_(2)O_(3) homojunction photoanode to improve the photoelectrochemical(PEC)performance of a Ti-doped Fe_(2)O_(3) photoanode.Ti-FeOOH nanocorals were synthesized using a hydrothermal process,and Si-FeOOH was grown on Ti-FeOOH nanocorals using a rapid and facile microwaveassisted(MW)technique.By varying the MW irradiation time,the thickness of the Si/Ti:Fe_(2)O_(3) photoanode was adjusted and an optimized 3-Si/Ti:Fe_(2)O_(3) photoelectrode was achieved with a significantly enhanced photocurrent density(1.37 mA cm^(-2) at 1.23 V vs.RHE)and a cathodic shift of the onset potential(150 mV)compared with that of bare Ti-Fe_(2)O_(3).This enhanced PEC performance can be ascribed to homojunction formation and Si gradient doping.The Si dopant increased the donor concentration and the formation of a homojunction improved the intrinsic built-in electric field,thereby promoting charge separation and charge transfer.Furthermore,the as-formed homojunction passivated the surfacetrapping states,consequently improving the charge transfer efficiency(60%at 1.23 VRHE)at the photoanode/electrolyte interface.These findings could pave the way for the microwave-assisted fabrication of diverse efficient homojunction photoanodes for PEC water splitting applications.
基金The support provided by the German Federal Ministry of Education and Research(BMBF)within the project“Benchbatt”(03XP0047B)is gratefully acknowledged.
文摘The solvent-free in situ polymerization technique has the potential to tailor-make conformal interfaces that are essential for developing durable and safe lithium metal polymer batteries(LMPBs).Hence,much attention has been given to the eco-friendly and rapid ultraviolet(UV)-induced in situ photopolymerization process to prepare solid-state polymer electrolytes.In this respect,an innovative method is proposed here to overcome the challenges of UV-induced photopolymerization(UV-curing)in the zones where UV-light cannot penetrate,especially in LMPBs where thick electrodes are used.The proposed frontal-inspired photopolymerization(FIPP)process is a diverged frontal-based technique that uses two classes(dual)of initiators to improve the slow reaction kinetics of allyl-based monomers/oligomers by at least 50%compared with the conventional UV-curing process.The possible reaction mechanism occurring in FIPP is demonstrated using density functional theory calculations and spectroscopic investigations.Indeed,the initiation mechanism identified for the FIPP relies on a photochemical pathway rather than an exothermic propagating front forms during the UV-irradiation step as the case with the classical frontal photopolymerization technique.Besides,the FIPP-based in situ cell fabrication using dual initiators is advantageous over both the sandwich cell assembly and conventional in situ photopolymerization in overcoming the limitations of mass transport and active material utilization in high energy and high power LMPBs that use thick electrodes.Furthermore,the LMPB cells fabricated using the in situ-FIPP process with high mass loading LiFePO_(4)electrodes(5.2 mg cm^(-2))demonstrate higher rate capability,and a 50%increase in specific capacity against a sandwich cell encouraging the use of this innovative process in large-scale solid-state battery production.
基金support of the National Natural Science Foundation of China(NSFC)(Grant Nos.22022101,21875006,11704024,and 12174200)The authors also acknowledge support from the National Key Research and Development Program of China(Grant No.2019YFA0708502)from the Nature Science Foundation of Tianjin(Grant No.20JCYBJC01530).
文摘Topochemical reactions are a promising method to obtain crystalline polymeric materials with distance-determined regio-or stereoselectivity.It has been concluded on an empirical basis that the closest intermolecular C⋅⋅⋅C distance in crystals of alkynes,d(C⋅⋅⋅C)min,should reach a threshold of∼3Åfor bonding to occur at room temperature.To understand this empirical threshold,we study here the polymerization of acetylene in the crystalline state under high pressure by calculating the structural geometry,vibrational modes,and reaction profile.We find d(C⋅⋅⋅C)min to be the sum of an intrinsic threshold of 2.3Åand a thermal displacement of 0.8Å(at room temperature).Molecules at the empirical threshold move via several phonon modes to reach the intrinsic threshold,at which the intermolecular electronic interaction is sharply enhanced and bonding commences.A distance–vibration-based reaction picture is thus demonstrated,which provides a basis for the prediction and design of topochemical reactions,as well as an enhanced understanding of the bonding process in solids.
基金funded by International Foundation for Science(IFS)and Organisation for the Prohibition of Chemical Weapons(OPCW)research grant awarded to Dr.Chukwuebuka Emmanuel Umeyor in 2019(Grant number:I-2-F-6448-1).
文摘There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.