Microwave-assisted Synthesis of Al_(4)SiC_(4) and Its Effect on Properties of MgO-C Refractories

Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to study its effect on the oxidation resistance, apparent porosity, bulk density, elastic modulus, and modulus of rupture. It is found that Al_(4)SiC_(4) can be synthesized by microwave sintering at 1 300 ℃ and the addition of Al_(4)SiC_(4)-containing material as an antioxidant can enhance the oxidation resistance of the magnesia carbon refractory brick.

Green Chemistry Allometry Test of Microwave-Assisted Synthesis of Transition Metal Nanostructures

Microwave irradiation is considered an important approach to Green Chemistry, because of its ability to rapidly increase the internal temperature of polar-organic compounds that lead to synthesis times of minutes rather than hours when compared to conventional thermal heating. This works describes a dual allometry test for the discrimination between the solvents and reagents used in the microwave-assisted synthesis of transition metal (zinc oxide, palladium silver, platinum, and gold) nanostructures. The test is performed in log-log process energy phase-space projection, where the synthesis data (kJ against kJ·mol-1) has a power-law signature. The test is shown to discriminate between recommended Green Chemistry, problematic Green Chemistry, and Green Chemistry hazardous solvents. Typically, recommended Green chemistry exhibits a broad y-axes distribution within an upper exponent = 1 and lower exponent = 0.5. Problematic Green Chemistry exhibits a y-axes narrower distribution with an upper exponent = 0.94 and lower exponent = 0.64. Non-Green Chemistry hazardous data exhibits a further narrowing of the y-axes distribution within upper exponent = 0.87 and lower exponent = 0.66. In all three cases, the y-axes is aligned to original database power-law signature. It is also shown that in the x-axes direction (process energy budget) the grouped order of magnitude decreases from four orders for recommended Green Chemistry solvent and reagent data, through two orders for non-Green Chemistry hazardous material and down to one order for problematic Green Chemistry.

Fast, green microwave-assisted synthesis of single crystalline Sb_2Se_3 nanowires towards promising lithium storage

In this work, a fast(0.5 h), green microwave-assisted synthesis of single crystalline Sb_2Se_3 nanowires was developed. For the first time we demonstrated a facile solvent-mediated process, whereby intriguing nanostructures including antimony selenide(Sb_2Se_3) nanowires and selenium(Se) microrods can be achieved by merely varying the volume ratio of ethylene glycol(EG) and H_2O free from expensive chemical and additional surfactant. The achieved uniform Sb_2Se_3 nanowire is single crystalline along [001]growth direction with a diameter of 100 nm and a length up to tens of micrometers. When evaluated as an anode of lithium-ion battery, Sb_2Se_3 nanowire can deliver a high reversible capacity of 650.2 m Ah g^(-1) at 100 mA g^(-1) and a capacity retention of 63.8% after long-term 1000 cycles at 1000 mA g^(-1), as well as superior rate capability(389.5 m Ah g^(-1) at 2000 mA g^(-1)). This easy solvent-mediated microwave synthesis approach exhibits its great universe and importance towards the fabrication of high-performance metal chalcogenide electrode materials for future low-cost, large-scale energy storage systems.

Microwave-assisted synthesis and characterization of ZnO-nanorod arrays

High density ZnO-nanorod arrays(rod length 1.59μm)were successfully synthesized via a microwave-assisted solution-phase method using zinc chloride and ammonia solution as reactants.The influence of concentration of ammonia solution, work power,and microwave irradiation time on the morphology and size of final products was carefully investigated.The crystal structure,chemical composition and morphologies of final products were characterized using X-ray powder diffraction(XRD), scanning electron microscopy(SEM)and photoluminescence(PL).The as-synthesized ZnO is composed of single crystalline and possesses three photoluminescence emissions centered at 400,469 and 534.5 nm,respectively.

Microwave-assisted synthesis of asymmetric thiocarbonohydrazones under solvent-free conditions

六新不对称的 thiocarbonohydrazones 3a –； 3f 从后面的步骤被综合：第一，肼水合物与碳二硫化物反应了在微波照耀下面形成 thiocarbonohydrazide (1 ) 。然后，化合物(1 ) 一步一步地与酉同类和不同的醛反应了给 3a –；有在用微波照耀的没有溶剂的条件下面的优秀收益的 3f。他们的结构被元素的分析，红外， MS 和 1 H NMR 数据。

A convenient microwave-assisted synthesis of cinchona alkaloid-derived ligands

辛可宁的有效合成导出碱的 ligands 基于没有溶剂的帮助微波的反应被描述。与奎宁，金鸡纳中毒或 cinchonidine 联合 1,4-dichlorophthalazine 或 3,6-dichloropyridazine 提供二度辛可宁或单音辛可宁的导出碱的 ligands 在对在在最佳微波条件下面的 15 min 以内的好收益(5289%) 中等。

Microwave-Assisted Transition Metal Nanostructure Synthesis: Power-Law Signature Verification

A power-law (y = cxn) signature between process energy budget (kJ) and process energy density (kJ·ml-1) of microwave-assisted synthesis of silver and gold nanostructures has been recently described [Law and Denis. AJAC, 14(4), 149-174, (2023)]. This study explores this relation further for palladium, platinum, and zinc oxide nanostructures. Parametric cluster analysis and statistical analysis is used to test the power-law signature of over four orders of magnitude as a function of six microwave applicator-types metal precursor, non-Green Chemistry synthesis and claimed Green Chemistry. It is found that for the claimed Green Chemistry, process energy budget ranges from 0.291 to 900 kJ, with a residual error ranging between −33 to +25.9 kJ·ml-1. The non-Green Chemistry synthesis has a higher process energy budget range from 3.2 kJ to 3.3 MJ, with a residual error of −33.3 to +245.3 kJ·ml-1. It is also found that the energy profile over time produced by software controlled digestion applicators is poorly reported which leads to residual error problematic outliers that produce possible phase-transition in the power-law signature. The original Au and Ag database and new Pd, Pt and ZnO database (with and without problematic outliers) yield a global microwave-assisted synthesis power-law signature constants of c = 0.7172 ± 0.3214 kJ·ml-1 at x-axes = 0.001 kJ, and the exponent, n = 0.791 ± 0.055. The information in this study is aimed to understand variations in historical microwave-assisted synthesis processes, and develop new scale-out synthesis through process intensification.

Microwave-Assisted Au and Ag Nanoparticle Synthesis: An Energy Phase-Space Projection Analysis

Microwave-assisted synthesis of gold and silver nanoparticles, as a function of Green Chemistry, non Green Chemistry, and four applicator types are reported. The applicator types are Domestic microwave ovens, commercial temperature controlled microwave chemistry ovens (TCMC), digesters, and axial field helical antennae. For each of these microwave applicators the process energy budget where estimated (Watts multiplied by process time = kJ) and energy density (applied energy divided by suspension volume = kJ·ml-1) range between 180 ± 176.8 kJ, and 79.5 ± 79 kJ·ml-1, respectively. The axial field helical field an-tenna applicator is found to be the most energy efficient (0.253 kJ·m-1 per kJ, at 36 W). Followed by microwave ovens (4.47 ± 3.9 kJ·ml-1 per 76.83 ± 39 kJ), and TCMC ovens (2.86 ± 2.3 kJ·m-1 per 343 ± 321.5 kJ). The digester applicators have the least energy efficiency (36.2 ± 50.7 kJ·m-1 per 1010 ± 620 kJ). A comparison with reconstructed ‘non-thermal’ microwave oven inactivation microorganism experiments yields a power-law signature of n = 0.846 (R2 = 0.7923) four orders of magnitude. The paper provides a discussion on the Au and Ag nanoparticle chemistry and bio-chemistry synthesis aspects of the microwave applicator energy datasets and variation within each dataset. The visual and analytical approach within the energy phase-space projection enables a nanoparticle synthesis route to be systematically characterized, and where changes to the synthesis are to be mapped and compared directly with historical datasets. In order to help identify lower cost nanoparticle synthesis, in addition to potentially reduce synthesis energy to routes informed changes to potentially reduce synthesis energy budget, along with nanoparticle morphology and yield.

Facile Microwave-Assisted Synthesis of 2D Imine-Linked Covalent Organic Frameworks for Exceptional Iodine Capture

Covalent organic frameworks(COFs)have emerged as auspicious porous adsorbents for radioiodine capture.However,their conventional solvothermal synthesis demands multiday synthetic times and anaerobic conditions,largely hampering their practical use.To tackle these challenges,we present a facile microwave-assisted synthesis of 2D imine-linked COFs,Mw-TFB-BD-X,(X=−CH_(3) and−OCH_(3))under air within just 1 h.The resultant COFs possessed higher crystallinity,better yields,and more uniform morphology than their solvothermal counterparts.Remarkably,Mw-TFB-BD-CH_(3) and Mw-TFB-BDOCH_(3) exhibited exceptional iodine adsorption capacities of 7.83 g g^(−1) and 7.05 g g^(−1),respectively,placing them among the bestperforming COF adsorbents for static iodine vapor capture.Moreover,Mw-TFB-BD-CH_(3) and Mw-TFB-BD-OCH_(3) can be reused 5 times with no apparent loss in the adsorption capacity.The exceptionally high iodine adsorption capacities and excellent reusability of COFs were mainly attributed to their uniform spherical morphology and enhanced chemical stability due to the in-built electron-donating groups,despite their low surface areas.This work establishes a benchmark for developing advanced iodine adsorbents that combine fast kinetics,high capacity,excellent reusability,and facile rapid synthesis,a set of appealing features that remain challenging to merge in COF adsorbents so far.

The structure-directing role of heterologous seeds in the synthesis of zeolite

Zeolites have been widely used as catalysts,ion-exchangers,and adsorbents in chemical industries,detergent industry,steel industry,glass industry,ceramic industry,medical and healthfield,and environmentalfield,and recently applied in energy storage.Seed-assisted synthesis is a very effective approach in promoting the crystallization of zeolites.In some cases,the target zeolite cannot be formed in the absence of seed zeolite.In homologous seed-assisted synthesis,the structure of the seed zeolite is the same to that of the target zeolite,while the structure of the seed zeolite is different to that of the target zeolite in the heterologous seed-assisted synthesis.In this review,we briefly summarized the heterologous seed-assisted syntheses of zeolites and analyzed the structure-directing effect of heterologous seeds and surveyed the“common composite building units(CBUs)hypothesis”and the“common secondary building units(SBUs)hypothesis”.However,both hypotheses cannot explain all observations on the heterologous seed-assisted syntheses.Finally,we proposed that the formation of the target zeolite does need nuclei with the structure of target zeolite and the formation of the nuclei of the target zeolite can be promoted by either the undissolved seed crystals with the same CBUs or SBUs to the target zeolite or by the facilitated appropriate distribution of the specific building units due to the presence of the heterologous seed that does not have any common CBUs and SBUs with the target zeolite.

Templated synthesis of transition metal phosphide electrocatalysts for oxygen and hydrogen evolution reactions

Transition metal phosphides(TMPs)have been regarded as alternative hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts owing to their comparable activity to those of noble metal-based catalysts.TMPs have been produced in various morphologies,including hollow and porous nanostructures,which are features deemed desirable for electrocatalytic materials.Templated synthesis routes are often responsible for such morphologies.This paper reviews the latest advances and existing challenges in the synthesis of TMP-based OER and HER catalysts through templated methods.A comprehensive review of the structure-property-performance of TMP-based HER and OER catalysts prepared using different templates is presented.The discussion proceeds according to application,first by HER and further divided among the types of templates used-from hard templates,sacrificial templates,and soft templates to the emerging dynamic hydrogen bubble template.OER catalysts are then reviewed and grouped according to their morphology.Finally,prospective research directions for the synthesis of hollow and porous TMP-based catalysts,such as improvements on both activity and stability of TMPs,design of environmentally benign templates and processes,and analysis of the reaction mechanism through advanced material characterization techniques and theoretical calculations,are suggested.

Microwave-assisted synthesis and antimicrobial activities of 2-aryl-3-(naphthalene-1 or 2-yl)-1,3-thiazolidin-4-ones

2-aryl-3-(naphthalene-1 or 2-yl)-1,3-thiazolidin-4-ones 4 and 5 were synthesized in 41%–67%yield by using microwave-assisted one-pot protocol.The structures of the new compounds 4l,4m,5c,5e,5g,5h,and 5j–5m were confirmed by IR,NMR,MS,and elemental analysis.The antimicrobial activities of the compounds against Pseudomonas syringae pv.lachrymans(Smith et Bryan)Young,Dye&Wilkie,Botrytis cinerea Pers.,and Sphaerotheca fusca Blum.were examined.Some of the compounds showed good antifungical activity against Sphaerotheca fusca Blum.

Synthesis Methods and Property Control of Two-Dimensional Magnetic Materials

Two-dimensional(2D)magnetic materials have been demonstrated to have excellent chemical,optical,electrical,and magnetic properties,particularly in the development of multifunctional electronic and spin electronic devices,showcasing tremendous potential.Therefore,corresponding synthesis techniques for 2D magnetic materials that offer high quality,high yield,low cost,time-saving,and simplicity are highly desired.This review provides a comprehensive overview of recent research advances in preparation of magnetic 2D materials,with a particular focus on the preparation methods employed.Moreover,the characteristics and applications of these magnetic materials are also discussed.Finally,the challenges and prospects of synthesis methods for magnetic 2D materials are briefly addressed.This review serves as a guiding reference for the controlled synthesis of 2D magnetic materials.

Synthesis of mordenite by solvent-free method and its application in the dimethyl ether carbonylation reaction

Mordenite with different Si/Al ratios were synthesized by solvent-free method and used for dimethyl ether(DME)carbonylation reaction.The influence of Si/Al ratio in the feedstock on the structure,porosity and acid sites were systematically investigated.The characterization results showed that with the increase of Si/Al ratio in the feedstock,part of silicon species fail to enter the skeleton and the specific surface area and pore volume of the samples decreased.The amount of weak acid and medium strong acid decreased alongside with the increasing Si/Al ratio,and the amount of strong acid slightly increased.The Al atoms preferentially enter the strong acid sites in the 8 member ring(MR)channel during the crystallization process.The high Si/Al ratio sample had more acid sites located in the 8 MR channel,leading to more active sites for carbonylation reaction and higher catalytic performance.Appropriately increasing the Si/Al ratio was beneficial for the improvement of carbonylation reaction activity over the mordenite(MOR)catalyst.

Synthesis of Silver Nanoparticles from Honeybees and Its Antibacterial Potential

Honeybees (Apis mellifera) are important pollinators of flowering plants and agricultural crops contributing annually to billions of dollars in revenues to crop production. Honeybees have an average lifespan between 8 weeks to 5 years. Dead honeybees are abundantly available in beehives and can be utilized as an alternative source to synthesize nanoparticles. In recent years, biologically synthesized nanoparticles have been preferred over their chemical counterparts. However, honeybee-based-green synthesis of nanoparticles has not been explored yet. Herein, we report the biosynthesis of silver nanoparticles from honeybees and its antibacterial activity. The synthesis of silver nanoparticles was monitored visually through a gradual change in color. Furthermore, the biosynthesized nanoparticles were confirmed and characterized by UV-visible spectroscopy. Scanning Electron Microscope was utilized to analyze the average size and morphologies of the biosynthesized nanoparticles. Subsequently, the antibacterial potential of the biosynthesized silver nanoparticles was tested against selected Gram-positive and Gram-negative bacterial strains. It was found that a distinct color change from yellow to brown in the reaction solution suggested the formation of silver nanoparticles. The biosynthesized nanoparticles exhibited absorption maxima at 430 nm. The SEM analysis confirmed the spherical and cuboidal shape of the biosynthesized silver nanoparticles with a size range between 10 - 40 nm. Furthermore, the biosynthesized silver nanoparticles exhibited strong antimicrobial potential against tested Gram-positive and Gram-negative bacteria strains by aggregating on the cell surface. This study showcases the biomedical and agricultural applications of biosynthesized silver nanoparticles from honeybee wings. .

EjGASA6 promotes flowering and root elongation by enhancing gibberellin biosynthesis

The Gibberellic Acid-stimulated Arabidopsis(GASA)gene family is involved in the regulation of gene expression and plant growth,development,and stress responses.To investigate the function of loquat GASA genes in the growth and developmental regulation of plants,a loquat EjGASA6 gene homologous to Arabidopsis AtGASA6 was cloned.EjGASA6 expression was induced by gibberellin,and ectopic transgenic plants containing this gene exhibited earlier bloom and longer primary roots since these phenotypic characteristics are related to higher gibberellin content.Transcriptome analysis and qRT-PCR results showed that the expression levels of GA3ox1 and GA20ox1,which encode key enzymes in gibberellin biosynthesis,were significantly increased.Furthermore,we confirmed that EjGASA6 could promote the expression of GA20ox1 via the luciferase reporter system.Overall,our results suggest that EjGASA6 promotes blooming and main-root elongation by positively regulating gibberellin biosynthesis.These findings broaden our understanding of the role of GASAs in plant development and growth,and lay the groundwork for future research into the functions of EjGASA6 in regulating loquat growth and development.

Transcriptomic and metabolomic analysis provides insights into lignin biosynthesis and accumulation and differences in lodging resistance in hybrid wheat

The use of hybrid wheat is one way to improve the yield in the future.However,greater plant heights increase lodging risk to some extent.In this study,two hybrid combinations with differences in lodging resistance were used to analyze the stem-related traits during the filling stage,and to investigate the mechanism of the difference in lodging resistance by analyzing lignin synthesis of the basal second internode(BSI).The stem-related traits such as the breaking strength,stem pole substantial degree(SPSD),and rind penetration strength(RPS),as well as the lignin content of the lodging-resistant combination(LRC),were significantly higher than those of the lodgingsensitive combination(LSC).The phenylpropanoid biosynthesis pathway was significantly and simultaneously enriched according to the transcriptomics and metabolomics analysis at the later filling stage.A total of 35 critical regulatory genes involved in the phenylpropanoid pathway were identified.Moreover,42%of the identified genes were significantly and differentially expressed at the later grain-filling stage between the two combinations,among which more than 80%were strongly up-regulated at that stage in the LRC compared with LSC.On the contrary,the LRC displayed lower contents of lignin intermediate metabolites than the LSC.These results suggested that the key to the lodging resistance formation of LRC is largely the higher lignin synthesis at the later grain-filling stage.Finally,breeding strategies for synergistically improving plant height and lodging resistance of hybrid wheat were put forward by comparing the LRC with the conventional wheat applied in large areas.

Green Synthesis of Silver Nanoparticles Using Aqueous Orange and Lemon Peel Extract and Evaluation of Their Antimicrobial Properties

Green synthesis of silver nanoparticles (AgNPs) using aqueous extracts of orange and lemon peels, as a reducing agent, and silver nitrate salts as a source of silver ions is a promising field of research due to the versatility of biomedical applications of metal nanoparticles. In this paper, AgNPs were synthetized at different reaction parameters such as the type and concentration of the extracts, metal salt concentration, temperature, speed stirring, and pH. The antibacterial properties of the obtained silver nanoparticles against E. coli, as well as the physical and chemical characteristics of the synthesized silver nanoparticles, were investigated. UV-Vis spectroscopy was used to confirm the formation of AgNPs. In addition to green biogenic synthesis, chemical synthesis of silver nanoparticles was also carried out. The optimal temperature for extraction was 65˚C, while for the synthesis of AgNPs was 35˚C. The synthesis is carried out in an acidic environment (pH = 4.7 orange and pH = 3.8 lemon), neutral (pH = 7) and alkaline (pH = 10), then for different concentrations of silver nitrate solution (0.5 mM - 1 mM), optimal time duration of the reaction was 60 min and optimal stirring speed rotation was 250 rpm on the magnetic stirrer. The physical properties of the synthesized silver nanoparticles (conductivity, density and refractive index) were also studied, and the passage of laser light through the obtained solution and distilled water was compared. Positive inhibitory effect on the growth of new Escherichia coli colonies have shown AgNPs synthesized at a basic pH value and at a 0.1 mM AgNO3 using orange or lemon peel extract, while for a 0.5 mM AgNO3 using lemon peel extract.

Process and performance of DAAF microspheres prepared by continuous integration from synthesis to spherical coating based on microfluidic system

In order to improve the energy output consistency of 3, 3’-diamino-4, 4’-azoxyfurazan(DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber(F2604), nitrocellulose(NC) and NC/glycidyl azide polymer(GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope(SEM) results show that the three droplet templates under the three binder formulations exhibit good balling effect and narrow particle size distribution. The DAAF microspheres were characterized by powder X-ray diffraction(XRD), differential scanning calorimetry(DSC), thermo-gravimetric(TG) and sensitivity analyzer. The results showed that the crystal structure of DAAF did not change during the process, and the prepared DAAF microspheres had lower decomposition temperature and lower mechanical sensitivity than raw DAAF. The results of detonation parameters show that the coating of DAAF by using the above three binder formulations will not greatly reduce the energy output of DAAF, and has comparable detonation performance to raw DAAF. This study proves an efficient and safe continuous system from synthesis to spherical coating modification of explosives, which provides a new way for the continuous, safe and efficient preparation of spherical explosives.

Enhancing MXene-based supercapacitors:Role of synthesis and 3D architectures

MXene has been the limelight for studies on electrode active materials,aiming at developing supercapacitors with boosted energy density to meet the emerging influx of wearable and portable electronic devices.Despite its various desirable properties including intrinsic flexibility,high specific surface area,excellent metallic conductivity and unique abundance of surface functionalities,its full potential for electrochemical performance is hindered by the notorious restacking phenomenon of MXene nanosheets.Ascribed to its two-dimensional(2D)nature and surface functional groups,inevitable Van der Waals interactions drive the agglomeration of nanosheets,ultimately reducing the exposure of electrochemically active sites to the electrolyte,as well as severely lengthening electrolyte ion transport pathways.As a result,energy and power density deteriorate,limiting the application versatility of MXene-based supercapacitors.Constructing 3D architectures using 2D nanosheets presents as a straightforward yet ingenious approach to mitigate the fatal flaws of MXene.However,the sheer number of distinct methodologies reported,thus far,calls for a systematic review that unravels the rationale behind such 3D MXene structural designs.Herein,this review aims to serve this purpose while also scrutinizing the structure–property relationship to correlate such structural modifications to their ensuing electrochemical performance enhancements.Besides,the physicochemical properties of MXene play fundamental roles in determining the effective charge storage capabilities of 3D MXene-based electrodes.This largely depends on different MXene synthesis techniques and synthesis condition variations,hence,elucidated in this review as well.Lastly,the challenges and perspectives for achieving viable commercialization of MXene-based supercapacitor electrodes are highlighted.