期刊文献+
共找到18篇文章
< 1 >
每页显示 20 50 100
Analysis of radiation heat transfer and temperature distribu- tions of solar thermochemical reactor for syngas production 被引量:3
1
作者 Bachirou GUENE LOUGOU Yong SHUAI +3 位作者 Xiang CHEN Yuan YUAN Heping TAN Huang XING 《Frontiers in Energy》 SCIE CSCD 2017年第4期480-492,共13页
This paper investigated radiation heat transfer and temperature distributions of solar thermochemical reactor for syngas production using the finite volume discrete ordinate method (fvDOM) and P1 approximation for r... This paper investigated radiation heat transfer and temperature distributions of solar thermochemical reactor for syngas production using the finite volume discrete ordinate method (fvDOM) and P1 approximation for radiation heat transfer. Different parameters including absorptivity, emissivity, reflection based radiation scatter- ing, and carrier gas flow inlet velocity that would greatly affect the reactor thermal performance were sufficiently investigated. The fvDOM approximation was used to obtain the radiation intensity distribution along the reactor. The drop in the temperature resulted from the radiation scattering was further investigated using the P1 approx- imation. The results indicated that the reactor temperature difference between the P1 approximation and the fvDOM radiation model was very close under different operating conditions. However, a big temperature difference which increased with an increase in the radiation emissivity due to the thermal non-equilibrium was observed in the radiation inlet region. It was found that the incident radiation flux distribution had a strong impact on the temperature distribution throughout the reactor. This paper revealed that the temperature drop caused by the boundary radiation heat loss should not be neglected for the thermal performance analysis of solar thermochemical reactor. 展开更多
关键词 solar thermochemical reactor incident radia-tion flux temperature distribution radiation absorptivity radiation emissivity thermal performance analysis
原文传递
Fundamental study of novel mid-and low-temperature solar thermochemical energy conversion 被引量:7
2
作者 JIN HongGuang HONG Hui +1 位作者 SUI Jun LIU QiBin 《Science China(Technological Sciences)》 SCIE EI CAS 2009年第5期1135-1152,共18页
A new approach to application of mid-and low-temperature solar thermochemical technology was in-troduced and investigated.Concentrated solar thermal energy in the range of 150―300℃ can be effi-ciently converted into... A new approach to application of mid-and low-temperature solar thermochemical technology was in-troduced and investigated.Concentrated solar thermal energy in the range of 150―300℃ can be effi-ciently converted into high-grade solar fuel by integrating this technique with the endothermic reaction of hydrocarbons.The conversion mechanism of upgrading the low-grade solar thermal energy to high-grade chemical energy was examined based on the energy level.The new mechanism was used to integrate two novel solar thermal power systems:A solar/methanol fuel hybrid thermal power plant and a solar-hybrid combined cycle with inherent CO2 separation using chemical-looping combustion,for developing highly efficient solar energy use to generate electricity.An innovative prototype of a 5-kW solar receiver/reactor,as the key process for realizing the proposed system,was designed and manu-factured.Furthermore,experimental validation of energy conversion of the mid-and low-temperature solar thermochemical processes were conducted.In addition,a second practical and viable approach to the production of hydrogen,in combination with the novel mid-and low-temperature solar thermo-chemical process,was proposed and demonstrated experimentally in the manufactured solar re-ceiver/reactor prototype through methanol steam reforming.The results obtained here indicate that the development of mid-and low-temperature solar thermochemical technology may provide a promising and new direction to efficient utilization of low-grade solar thermal energy,and may enable step-wise approaches to cost-effective,globally scalable solar energy systems. 展开更多
关键词 mid-and LOW-temperature solar THERMOCHEMICAL process upgrading ENERGY level of solar thermal ENERGY solar receiver/reactor system integration experimental STUDY
原文传递
内置秸秆反应堆和菌剂对日光温室土壤温度及越冬番茄生长的影响 被引量:18
3
作者 彭杏敏 陈之群 +3 位作者 陈青云 佟二建 徐凯 高丽红 《中国蔬菜》 北大核心 2011年第Z1期63-67,共5页
以日光温室越冬番茄为试材,研究了内置秸秆反应堆和菌剂对日光温室土壤温度及越冬番茄生长的影响。结果表明:施用微生物菌剂、内置式秸秆反应堆技术及两者共用后平均分别增加土壤温度0.28、0.85、1.23℃;内置式秸秆反应堆技术及两者共... 以日光温室越冬番茄为试材,研究了内置秸秆反应堆和菌剂对日光温室土壤温度及越冬番茄生长的影响。结果表明:施用微生物菌剂、内置式秸秆反应堆技术及两者共用后平均分别增加土壤温度0.28、0.85、1.23℃;内置式秸秆反应堆技术及两者共用能够显著加快越冬番茄植株的生长速率,使番茄前期产量增加10.7%和11.8%。 展开更多
关键词 菌剂 内置秸秆反应堆 日光温室 土壤温度 越冬番茄 产量
下载PDF
秸秆反应堆在北方日光温室长季节栽培中的应用研究 被引量:6
4
作者 何志刚 王秀娟 +3 位作者 董环 娄春荣 牛世伟 张鑫 《北方园艺》 CAS 北大核心 2013年第19期60-62,共3页
以"金棚1号"番茄、"美国碧玉"角瓜为试材,在北方日光温室长季节栽培模式下,研究了秸秆内置反应堆4种不同启动时间以及是否添加菌剂对日光温室冬季地温、植株整个生育期生物学性状以及产量的影响。结果表明:秸秆生... 以"金棚1号"番茄、"美国碧玉"角瓜为试材,在北方日光温室长季节栽培模式下,研究了秸秆内置反应堆4种不同启动时间以及是否添加菌剂对日光温室冬季地温、植株整个生育期生物学性状以及产量的影响。结果表明:秸秆生物反应堆处理可明显提高日光温室地温,15cm土层平均温度增加1.63、1.05、1.09、1.34℃,前茬番茄长势明显优于对照,根系发达、健壮,产量平均比对照增加16.20%;后茬角瓜后效明显,比对照增产37.14%。 展开更多
关键词 内置秸秆反应堆 日光温室 土壤温度 长季节栽培 经济效益
下载PDF
中低温太阳热能与甲醇重整互补制氢实验研究 被引量:3
5
作者 刘启斌 洪慧 +2 位作者 袁建丽 金红光 蔡睿贤 《工程热物理学报》 EI CAS CSCD 北大核心 2008年第3期361-365,共5页
本文提出一种利用150-300℃中低温太阳能驱动的甲醇-水重整反应制氢的新方法,该方法操作温度远低于其他太阳能热化学制氢方式。在5 kW抛物槽式太阳能集热器、吸收/反应器上对制氢关键过程进行了实验研究。实验结果表明:甲醇转化率可达90... 本文提出一种利用150-300℃中低温太阳能驱动的甲醇-水重整反应制氢的新方法,该方法操作温度远低于其他太阳能热化学制氢方式。在5 kW抛物槽式太阳能集热器、吸收/反应器上对制氢关键过程进行了实验研究。实验结果表明:甲醇转化率可达90%以上,产物氢气浓度为66%-74%;1 mol甲醇制氢量可达2.90 mol,接近理想状态3 mol;基于能量品位的概念,深入分析了这一过程的能量转换机理;并对制氢成本进行了初步分析。本文的研究成果为高效利用中低温太阳热能与低能耗、低成本制氢提供一条新途径。 展开更多
关键词 制氢 甲醇重整反应 中低温太阳能反应器
下载PDF
高温异型热管启动性能实验研究 被引量:4
6
作者 马婷婷 曾金令 +1 位作者 王啸远 朱跃钊 《南京工业大学学报(自然科学版)》 北大核心 2017年第3期6-10,共5页
将热管技术集成到反应器中,开发了一种太阳能高温热化学耦合相变反应器(STPCR)。该反应器的核心部件为由热板和多根热管耦合而成的高温异型热管(HTSSHP)。针对反应器实际运行时的特点,初步考察了高温异型热管在不同起始温度和倾角下的... 将热管技术集成到反应器中,开发了一种太阳能高温热化学耦合相变反应器(STPCR)。该反应器的核心部件为由热板和多根热管耦合而成的高温异型热管(HTSSHP)。针对反应器实际运行时的特点,初步考察了高温异型热管在不同起始温度和倾角下的启动性能。实验结果表明,起始温度的变化对启动性能的影响可以忽略;0°、15°、30°和45°倾角下高温异型热均能成功启动,但热板段和热管段呈现不同的规律,热板段垂直放置时启动性能最好,而热管段15°倾角下最佳。证明了高温异型管结构合理,可应用于太阳能系统中。 展开更多
关键词 太阳能反应器 钠热管 启动性能 起始温度 倾角
下载PDF
氨基热化学储能反应器的热性能分析 被引量:4
7
作者 龙新峰 廖葵 《热力发电》 CAS 北大核心 2008年第11期59-63,共5页
氨基热化学储能方法为纯太阳能热发电的稳定性和不间断性提供了一条有效途径。介绍了氨基热化学储能的基本原理,在此基础上建立了放热反应器(氨合成反应器)的数学模型,定量分析和讨论了在一定设计压力和氢氮比条件下,进气温度和进气流... 氨基热化学储能方法为纯太阳能热发电的稳定性和不间断性提供了一条有效途径。介绍了氨基热化学储能的基本原理,在此基础上建立了放热反应器(氨合成反应器)的数学模型,定量分析和讨论了在一定设计压力和氢氮比条件下,进气温度和进气流率对反应的影响,给出了实现火用最优化和热能最大化的操作参数,并比较了最优火用和最大热能的关系。模拟结果表明,反应器内催化床层的平均温度是实现火用和能量最大化的最重要调节参数,反应温度为850℃时输出最大火用,反应温度为650℃时输出最大热能。 展开更多
关键词 热化学储能 太阳能 热发电 高温蓄热 放热反应器 热能
下载PDF
粒子系太阳能反应器气固两相流与温度场特性 被引量:2
8
作者 谭建宇 马云千 +2 位作者 王富强 马兰新 王彦岩 《节能技术》 CAS 2017年第4期313-318,325,共7页
为粒子系太阳能反应器的设计与制造提供理论指导,利用CFD方法对粒子系反应器内的流动与传热过程进行了数值模拟,建立了能够合适的描述反应器内气固两相流动与传热的数学模型。在特定的流动状态下给反应器壁面施加不同的热流得到不同的... 为粒子系太阳能反应器的设计与制造提供理论指导,利用CFD方法对粒子系反应器内的流动与传热过程进行了数值模拟,建立了能够合适的描述反应器内气固两相流动与传热的数学模型。在特定的流动状态下给反应器壁面施加不同的热流得到不同的温度场特性,并对不同的流动状态和温度场进行了对比。研究结果表明:双流体模型和k-ε湍流模型能够很好的描述粒子系反应器内的流动情况;空气速度0.1 m/s、颗粒粒径0.09 mm时反应器内流动状态为环-核流动,且反应器中气固两相的环-核流动状态要优于悬浮状态;在相同热流条件下,环-核流动状态的出口温度比悬浮状态的出口温度高50 K,但是无论是哪种热流,反应器出口的空气温度随时间的增加趋于定值。 展开更多
关键词 太阳能粒子系反应器 气固两相流 粒径与空气流速 温度场特性
下载PDF
抛物面碟式太阳能接收器与高温反应器的联合传热特性分析 被引量:1
9
作者 串禾 吴海峰 +4 位作者 谢更新 郑洁 段洋 杜超军 王羲 《重庆大学学报(自然科学版)》 EI CAS CSCD 北大核心 2018年第9期11-18,共8页
太阳能接收器和反应器的几何结构直接影响其传热特性及化学反应过程,利用光学特性产生高强度辐射通量是营造高温的常用方法。构造了一种基于抛物面碟式太阳能接收器的高温反应器,分为预热区和多孔反应区,通过COMSOL Metaphysics软件建... 太阳能接收器和反应器的几何结构直接影响其传热特性及化学反应过程,利用光学特性产生高强度辐射通量是营造高温的常用方法。构造了一种基于抛物面碟式太阳能接收器的高温反应器,分为预热区和多孔反应区,通过COMSOL Metaphysics软件建立其三维数值模型,计算焦平面热通量分布规律,在典型运行条件下(DNI=800 W/m^2,u_(in)=0.1 m/s),分析反应器的速度和温度分布规律,以及DNI和反应流体入口速度对反应器传热特性的影响。 展开更多
关键词 抛物面碟式接收器 高温反应器 传热特性 多物理场
下载PDF
基于单片机的沼气反应罐温度控制系统
10
作者 张景文 王震宏 高为浪 《河南科学》 2011年第4期472-475,共4页
介绍了一种新型的太阳能与生物质能互补的沼气发酵控制系统.针对温度变化对沼气发酵影响,进行了温度控制系统的主要硬件电路和软件程序设计.该系统以单片机为核心,使用太阳能与生物质能互补加热,自动控制温度.实验表明,系统稳定可靠,使... 介绍了一种新型的太阳能与生物质能互补的沼气发酵控制系统.针对温度变化对沼气发酵影响,进行了温度控制系统的主要硬件电路和软件程序设计.该系统以单片机为核心,使用太阳能与生物质能互补加热,自动控制温度.实验表明,系统稳定可靠,使用简单,能够满足户用沼气生产的要求.该系统利用了太阳能与生物质能互补的原理,降低了环境温度与太阳能的变化对沼气发酵的不利影响,实现了沼气生产中对太阳能与生物质能的高效互补利用,提高了沼气反应罐运行的稳定性和持久性. 展开更多
关键词 沼气反应器 温度控制 单片机 太阳能 生物质能
下载PDF
太阳能高温异型热管热应力数值摸拟 被引量:3
11
作者 曾金令 马炎 +3 位作者 马婷婷 朱跃钊 杨谋存 陈海军 《热力发电》 CAS 北大核心 2015年第8期68-73,78,共7页
在太阳能高温热化学转化利用中,传统的直接照射式太阳能高温反应器和间接照射式两腔太阳能高温反应器均存在局部高温热点、两腔间传热能力差等问题。为此,应用高温热板-热管技术研制了新型太阳能高温相变反应器,其核心部件为高温异型热... 在太阳能高温热化学转化利用中,传统的直接照射式太阳能高温反应器和间接照射式两腔太阳能高温反应器均存在局部高温热点、两腔间传热能力差等问题。为此,应用高温热板-热管技术研制了新型太阳能高温相变反应器,其核心部件为高温异型热管(HTSHP)。为分析HTSHP的热承载能力,构建了传热热阻模型,采用有限元分析软件ANSYS的热-应力耦合功能,对HTSHP在稳态条件下的温度场、应力场、热变形进行了数值模拟。结果表明,HTSHP最高温度为768℃,最大温差为18℃,均温性和传热能力较好;热应力集中于过渡连接的热板内壁上,最大应力为24.6 MPa,满足钢制压力容器分析设计标准的要求。 展开更多
关键词 太阳能 高温相变反应器 高温异型热管 热-应力耦合 均温性
下载PDF
氧化还原储热技术的研究现状及进展 被引量:2
12
作者 王会 王诗卉 +1 位作者 李振山 蔡宁生 《中国电机工程学报》 EI CSCD 北大核心 2019年第21期6309-6319,共11页
聚光太阳能热发电技术通过配备储热系统,可解决不连续的太阳能供给与连续的电能消耗之间的矛盾。随着太阳能热发电技术的发展,其系统工作温度和发电效率将逐步提高,相应地需要发展高温储热技术。在热化学储热体系中,氧化还原储热体系无... 聚光太阳能热发电技术通过配备储热系统,可解决不连续的太阳能供给与连续的电能消耗之间的矛盾。随着太阳能热发电技术的发展,其系统工作温度和发电效率将逐步提高,相应地需要发展高温储热技术。在热化学储热体系中,氧化还原储热体系无需额外配置换热器和气体储存罐,可提高系统整体热效率,在高温储热领域具有较大应用潜力。讨论氧化还原储热体系相比于其他热化学储热体系的技术优势,综述氧化还原储热技术在储热材料和反应器两方面的研究现状和进展,并指出需要进一步研究和解决的问题。 展开更多
关键词 聚光太阳能热发电 高温 氧化还原储热 材料 反应器
下载PDF
太阳能甲烷重整反应器研究进展 被引量:7
13
作者 刘彦铄 王新赫 +1 位作者 张军社 魏进家 《化工进展》 EI CAS CSCD 北大核心 2019年第12期5339-5350,共12页
太阳能是世界上最丰富的清洁能源,被看作是解决化石能源短缺问题的关键。但是太阳能的间歇性很大程度上制约了其使用场景,太阳能热化学过程可以有效缓解太阳能间歇性带来的影响。在太阳能热化学过程中,反应器的性能直接影响了反应的效... 太阳能是世界上最丰富的清洁能源,被看作是解决化石能源短缺问题的关键。但是太阳能的间歇性很大程度上制约了其使用场景,太阳能热化学过程可以有效缓解太阳能间歇性带来的影响。在太阳能热化学过程中,反应器的性能直接影响了反应的效果。本文以太阳能甲烷重整过程为例,首先介绍了3种甲烷重整类型,分别介绍了其优缺点和工程应用。然后从结构、工作原理以及研究进展等方面简述了几种目前常见的太阳能甲烷重整反应器。包括对目前最常见的腔式反应器、膜反应器、旋转式反应器、流化床反应器和其他新颖反应器的介绍。最后,提出下一阶段太阳能甲烷重整反应器的研究重心应放在设计多功能于一体的反应器和促进多学科交叉研究上。 展开更多
关键词 太阳能 热化学储能 甲烷 合成气 化学反应器
下载PDF
基于金属氢化物高温蓄热的氢热耦合传递机理 被引量:2
14
作者 刘洋 Iqra AYUB +2 位作者 杨福胜 吴震 张早校 《化工学报》 EI CAS CSCD 北大核心 2021年第9期4607-4615,共9页
目前大多数可再生能源如太阳能具有间歇性和不稳定性的问题,因此高效蓄热技术成为了发展太阳能的一个关键途径。金属氢化物高温蓄热技术作为热化学蓄热中最有前途的方法之一,受到了人们的广泛关注。为了实现金属氢化物高温蓄热技术的工... 目前大多数可再生能源如太阳能具有间歇性和不稳定性的问题,因此高效蓄热技术成为了发展太阳能的一个关键途径。金属氢化物高温蓄热技术作为热化学蓄热中最有前途的方法之一,受到了人们的广泛关注。为了实现金属氢化物高温蓄热技术的工程应用,明确其氢热耦合传递机理至关重要。本研究采用数值模拟的方法,通过建立反应器的多物理场耦合模型,讨论了不同时刻下床层内部参数的分布,得到了反应锋面的形成和移动机理以及非均匀反应的形成机理;此外,结合反应器内部氢压、接触热阻和床层热阻的变化规律,明确了不同阶段下金属氢化物高温蓄热技术的控制环节;最后,依据金属氢化物高温蓄热技术的工程应用挑战,提出了相应的研究策略。 展开更多
关键词 太阳能 金属氢化物 高温蓄热 传递 反应器 数值模拟
下载PDF
Hypersphere World-Universe Model: Evolution of the World 被引量:2
15
作者 Vladimir S. Netchitailo 《Journal of High Energy Physics, Gravitation and Cosmology》 2021年第2期508-530,共23页
The main objective of this paper is to discuss the Evolution of a 3D Finite World (that is a Hypersphere of a 4D Nucleus of the World) from the Beginning up to the present Epoch in frames of World-Universe Model (WUM)... The main objective of this paper is to discuss the Evolution of a 3D Finite World (that is a Hypersphere of a 4D Nucleus of the World) from the Beginning up to the present Epoch in frames of World-Universe Model (WUM). WUM is the only cosmological model in existence that is consistent with the Law of Conservation of Angular Momentum. To be consistent with this Fundamental Law, WUM introduces Dark Epoch (spanning from the Beginning of the World for 0.45 billion years) when only Dark Matter (DM) Macroobjects (MOs) existed, and Luminous Epoch (ever since for 13.77 billion years) when Luminous MOs emerged due to Rotational Fission of Overspinning DM Superclusters’ Cores and self-annihilation of Dark Matter Particles (DMPs). WUM envisions that DM is created by the Universe in the 4D Nucleus of the World. Dark Matter Particles (DMPs) carry new DM into the 3D Hypersphere World. Luminous Matter is a byproduct of DMPs self-annihilation. By analogy with 3D ball, which has two-dimensional sphere surface (that has surface energy), we can imagine that the 3D Hypersphere World has a “Surface Energy” of the 4D Nucleus. WUM solves a number of physical problems in contemporary Cosmology and Astrophysics through DMPs and their interactions: <b>Angular Momentum problem</b> in birth and subsequent evolution of Galaxies and Extrasolar systems—how do they obtain it;<b>Fermi Bubbles</b>—two large structures in gamma-rays and X-rays above and below Galactic center;<b>Missing Baryon problem</b> related to the fact that the observed amount of baryonic matter did not match theoretical predictions. WUM reveals <b>Inter-Connectivity of Primary Cosmological Parameters</b> and calculates their values, which are in good agreement with the latest results of their measurements. In 2013, WUM predicted the values of the following Cosmological parameters: gravitational, concentration of intergalactic plasma, and the minimum energy of photons, which were experimentally confirmed in 2015-2018. “<i>The Discovery of a Supermassive Compact Object at the Centre of Our Galaxy</i>” (Nobel Prize in Physics 2020) made by Prof. R. Genzel and A. Ghez is a confirmation of one of the most important predictions of WUM in 2013: “<i>Macroobjects of the World have cores made up of the discussed DM particles. Other particles, including DM and baryonic matter, form shells surrounding the cores</i>”. 展开更多
关键词 Hypersphere World-Universe Model Law of Conservation of Angular Momentum Dark Epoch Rotational Fission Luminous Epoch Dark Matter Particles Macroobject Shell Model Dark Matter Core Medium of the World Dark Matter Fermi Bubbles Galactic Wind solar Wind Gamma-Ray Bursts Gravitational Bursts Intergalactic Plasma Cosmological Time solar Time Macroobjects Supremacy of Matter Gravitomagnetic Parameter Impedance Energy Density Gravitational Parameter Hubble’s Parameter temperature of Microwave Background Radiation Inter-Connectivity of Primary Cosmological Parameters Dark Matter reactor
下载PDF
Hypersphere World-Universe Model 被引量:3
16
作者 Vladimir S. Netchitailo 《Journal of High Energy Physics, Gravitation and Cosmology》 2021年第2期915-941,共27页
Dirac’s themes were the unity and beauty of Nature. He identified three revolutions in modern physics: Relativity, Quantum Mechanics and Cosmology. In his opinion: “<i>The new cosmology will probably turn out ... Dirac’s themes were the unity and beauty of Nature. He identified three revolutions in modern physics: Relativity, Quantum Mechanics and Cosmology. In his opinion: “<i>The new cosmology will probably turn out to be philosophically even more revolutionary than relativity or the quantum theory, perhaps looking forward to the current bonanza in cosmology, where precise observations on some of the most distant objects in the universe are shedding light on the nature of reality, on the nature of matter and on the most advanced quantum theories</i>” [Farmelo, G. (2009) The Strangest Man. The Hidden Life of Paul Dirac, Mystic of the Atom. Basic Books, Britain, 661 p]. In 1937, Paul Dirac proposed the Large Number Hypothesis and the Hypothesis of the variable gravitational “constant”;and later added the notion of continuous creation of Matter in the World. The developed Hypersphere World-Universe Model (WUM) follows these ideas, albeit introducing a different mechanism of matter creation. In this paper, we show that WUM is a natural continuation of Classical Physics and it can already serve as a basis for a New Cosmology proposed by Paul Dirac. 展开更多
关键词 Hypersphere World-Universe Model Law of Conservation of Angular Momentum Dark Epoch Rotational Fission Luminous Epoch Dark Matter Particles Macroobject Shell Model Dark Matter Core Medium of the World Dark Matter Fermi Bubbles Galactic Wind solar Wind Gravitational Bursts Intergalactic Plasma Macroobjects Supremacy of Matter Gravitomagnetic parameter Impedance Energy Density Gravitational Parameter Hubble’s Parameter temperature of Microwave Background Radiation Inter-Connectivity of Primary Cosmological Parameters Dark Matter reactor
下载PDF
From the Beginning of the World to the Beginning of Life on Earth 被引量:3
17
作者 Vladimir S. Netchitailo 《Journal of High Energy Physics, Gravitation and Cosmology》 2021年第4期1503-1523,共21页
Hypersphere World-Universe Model (WUM) is, in fact, a Paradigm Shift in Cosmology [1]. In this paper, we provide seven Pillars of WUM: Medium of the World;Inter-Connectivity of Primary Cosmological Parameters;Creation... Hypersphere World-Universe Model (WUM) is, in fact, a Paradigm Shift in Cosmology [1]. In this paper, we provide seven Pillars of WUM: Medium of the World;Inter-Connectivity of Primary Cosmological Parameters;Creation of Matter;Multicomponent Dark Matter;Macroobjects;Volcanic Rotational Fission;Dark Matter Reactors. We describe the evolution of the World from the Beginning up to the birth of the Solar System and discuss the condition of the Early Earth before the beginning of life on it. 展开更多
关键词 Hypersphere World-Universe Model Law of Conservation of Angular Momentum Dark Epoch Volcanic Rotational Fission Luminous Epoch Dark Matter Particles Macroobject Shell Model Dark Matter Core Medium of the World Dark Matter Fermi Bubbles Galactic Wind solar Wind Intergalactic Plasma Macroobjects Gravitomagnetic Parameter Impedance Energy Density Gravitational Parameter Hubble’s Parameter temperature of Microwave Background Radiation Inter-Connectivity of Primary Cosmological Parameters Dark Matter reactor Early Earth Formation of Earth Origin of Moon Continental Crust of Earth Earth’s Atmosphere and Oceans Origin of Life
下载PDF
添加颗粒对太阳能热化学反应器温度提升的量化分析
18
作者 段芮 崔国民 朱群志 《热能动力工程》 CAS CSCD 北大核心 2019年第2期116-121,共6页
添加颗粒可以提高太阳能热化学反应器对辐射的吸收。为了得到添加颗粒对太阳能热化学反应器温度提升的量化数据,采用实验和CFD数值模拟相结合的方法,研究添加碳颗粒后反应器温度的提升。实验测得的温升约90 K,数值模拟得到的温升约200 K... 添加颗粒可以提高太阳能热化学反应器对辐射的吸收。为了得到添加颗粒对太阳能热化学反应器温度提升的量化数据,采用实验和CFD数值模拟相结合的方法,研究添加碳颗粒后反应器温度的提升。实验测得的温升约90 K,数值模拟得到的温升约200 K,这些数据可说明添加适量微米级别颗粒,可显著提升反应器内气体温度。 展开更多
关键词 添加颗粒 太阳能热化学反应器 温度提升 实验研究 数值模拟
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部