Millimeter-wave(mmWave)radar communication has emerged as an important technique for future wireless systems.However,the interference between the radar signal and communication data is the main issue that should be co...Millimeter-wave(mmWave)radar communication has emerged as an important technique for future wireless systems.However,the interference between the radar signal and communication data is the main issue that should be considered for the joint radar communication system.In this paper,a co-sharing waveform(CSW)is proposed to achieve communication and radar sensing simultaneously.To eliminate the co-interference between the communication and sensing signal,signal splitting and processing methods for communication data demodulation and radar signal processing are given respectively.Simulation results show that the bit error rate(BER)of CSW is close to that of the pure communication waveform.Moreover,the proposed CSW can achieve better performance than the existing waveforms in terms of range and velocity estimation.展开更多
This work presents,design and specific absorption rate(SAR)analysis of a 37GHz antenna,for 5th Generation(5G)applications.The proposed antenna comprises of 4-elements of rectangular patch and an even distribution.The ...This work presents,design and specific absorption rate(SAR)analysis of a 37GHz antenna,for 5th Generation(5G)applications.The proposed antenna comprises of 4-elements of rectangular patch and an even distribution.The radiating element is composed of copper material supported by Rogers RT5880 substrate of thickness,0.254 mm,dielectric constant(εr),2.2,and loss tangent,0.0009.The 4-elements array antenna is compact in size with a dimension of 8mm×20mm in length and width.The radiating patch is excited with a 50 ohms connector i.e.,K-type.The antenna resonates in the frequency band of 37 GHz,that covers the 5G applications.The antenna behavior is studied both in free space and in the proximity of the human body.Three models of the human body,i.e.,belly,hand,and head(contain skin,fat,muscles,and bone)are considered for on-body simulations.At resonant frequency,the antenna gives a boresight gain of 11.6 dB.The antenna radiates efficiently with a radiated efficiency of more than 90%.Also,it is observed that the antenna detunes to the lowest in the proximity of the human body,but still a good impedance matching is achieved considering the−10 dB criteria.Moreover,SAR is also being presented.The safe limit of 2 W/kg for any 10 g of biological tissue,specified by the European International Electro Technical Commission(IEC)has been considered.The calculated values of SAR for human body models,i.e.,belly,hand and head are 1.82,1.81 and 1.09 W/kg,respectively.The SAR values are less than the international recommendations for the three models.Furthermore,the simulated and measured results of the antenna are in close agreement,which makes it,a potential candidate for the fifth-generation smart phones and other handheld devices.展开更多
This paper considers the non-line-of-sight(NLOS)vehicle localization problem by using millimeter-wave(MMW)automotive radar.Several preliminary attempts for NLOS vehicle detection are carried out and achieve good resul...This paper considers the non-line-of-sight(NLOS)vehicle localization problem by using millimeter-wave(MMW)automotive radar.Several preliminary attempts for NLOS vehicle detection are carried out and achieve good results.Firstly,an electromagnetic(EM)wave NLOS multipath propagation model for vehicle scene is established.Subsequently,with the help of available multipath echoes,a complete NLOS vehicle localiza-tion algorithm is proposed.Finally,simulation and experimental results validate the effectiveness of the established EM wave propagation model and the proposed NLOS vehicle localization algorithm.展开更多
Unmanned aerial vehicle(UAV)has been widely used in many fields and is arousing global attention.As the resolution of the equipped sensors in the UAV becomes higher and the tasks become more complicated,much higher da...Unmanned aerial vehicle(UAV)has been widely used in many fields and is arousing global attention.As the resolution of the equipped sensors in the UAV becomes higher and the tasks become more complicated,much higher data rate and longer communication range are required in the foreseeable future.As the millimeter-wave(mm Wave)band can provide more abundant frequency resources than the microwave band,much higher achievable rate can be guaranteed to support UAV services such as video surveillance,hotspot coverage,and emergency communications,etc.The flexible mm Wave beamforming can be used to overcome the high path loss caused by the long propagation distance.In this paper,we study three typical application scenarios for mm Wave-UAV communications,namely communication terminal,access point,and backbone link.We present several key enabling techniques for UAV communications,including beam tracking,multi-beam forming,joint Tx/Rx beam alignment,and full-duplex relay techniques.We show the coupling relation between mm Wave beamforming and UAV positioning for mm Wave-UAV communications.Lastly,we summarize the challenges and research directions of mm Wave-UAV communications in detail.展开更多
This study investigated the ability of millimeter-wave (MMW) to promote the differentiation of bone marrow stromal cells (BMSCs) into cells with a neural phenotype. The BMSCs were primarily cultured. At passage 3,...This study investigated the ability of millimeter-wave (MMW) to promote the differentiation of bone marrow stromal cells (BMSCs) into cells with a neural phenotype. The BMSCs were primarily cultured. At passage 3, the cells were induced by β-mercaptoethanol (BME) in combination with MMW or BME alone. The expressions of nucleostemin (NS) and neuron-specific enolase (NSE) were detected by immunofluorescent staining and Western blotting respectively to identify the differentiation. The untreated BMSCs predominately expressed NS. After induced by BME and MMW, the BMSCs exhibited a dramatic decrease in NS expression and increase in NSE expression. The differentiation rate of the cells treated with BME and MMW in combination was significantly higher than that of the cells treated with BME alone (P〈0.05). It was concluded that MMW exposure enhanced the inducing effect of BME on the differentiation of BMSCs into cells with a neural phenotype.展开更多
We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footpr...We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footprint of 1.1 × 2.1 mm^2 and integrates 7 independent channels each having on-chip polarization control and heterodyne mixing functions. 7 channels of4-Gb/s QPSK baseband signals are delivered via a 2-km multi-core fiber(MCF) and coupled into the chip with a local oscillator(LO) light. The polarization state of each signal light is automatically adjusted and aligned with that of the LO light, and then 7 channels of 28-GHz MMW carrying 4-Gb/s QPSK signals are generated by optical heterodyne beating. Automated polarizationcontrol function of each channel is also demonstrated with ~7-ms tuning time and ~27-dB extinction ratio.展开更多
The fifth generation(5G)network communication systems operate in the millimeter waves and are expected to provide a much higher data rate in the multi-gigabit range,which is impossible to achieve using current wireles...The fifth generation(5G)network communication systems operate in the millimeter waves and are expected to provide a much higher data rate in the multi-gigabit range,which is impossible to achieve using current wireless services,including the sub-6 GHz band.In this work,we briefly review several existing designs of millimeter-wave phased arrays for 5G applications,beginning with the low-profile antenna array designs that either are fixed beam or scan the beam only in one plane.We then move on to array systems that offer two-dimensional(2D)scan capability,which is highly desirable for a majority of 5G applications.Next,in the main body of the paper,we discuss two different strategies for designing scanning arrays,both of which circumvent the use of conventional phase shifters to achieve beam scanning.We note that it is highly desirable to search for alternatives to conventional phase shifters in the millimeter-wave range because legacy phase shifters are both lossy and costly;furthermore,alternatives such as active phase shifters,which include radio frequency amplifiers,are both expensive and power-hungry.Given this backdrop,we propose two different antenna systems with potential for the desired 2D scan performance in the millimeter-wave range.The first of these is a Luneburg lens,which is excited either by a 2D waveguide array or by a microstrip patch antenna array to realize 2D scan capability.Next,for second design,we turn to phased-array designs in which the conventional phase shifter is replaced by switchable PIN diodes or varactor diodes,inserted between radiating slots in a waveguide to provide the desired phase shifts for scanning.Finally,we discuss several approaches to enhance the gain of the array by modifying the conventional array configurations.We describe novel techniques for realizing both one-dimensional(1D)and 2D scans by using a reconfigurable metasurface type of panels.展开更多
Millimeter-wave cloud radar(MMCR)provides the capability of detecting the features of micro particles inside clouds and describing the internal microphysical structure of the clouds.Therefore,MMCR has been widely appl...Millimeter-wave cloud radar(MMCR)provides the capability of detecting the features of micro particles inside clouds and describing the internal microphysical structure of the clouds.Therefore,MMCR has been widely applied in cloud observations.However,due to the influence of non-meteorological factors such as insects,the cloud observations are often contaminated by non-meteorological echoes in the clear air,known as clear-air echoes.It is of great significance to automatically identify the clear-air echoes in order to extract effective meteorological information from the complex weather background.The characteristics of clear-air echoes are studied here by combining data from four devices:an MMCR,a laser-ceilometer,an L-band radiosonde,and an all-sky camera.In addition,a new algorithm,which includes feature extraction,feature selection,and classification,is proposed to achieve the automatic identification of clear-air echoes.The results show that the recognition algorithm is fairly satisfied in both simple and complex weather conditions.The recognition accuracy can reach up to 95.86%for the simple cases when cloud echoes and clear-air echoes are separate,and 88.38%for the complicated cases when low cloud echoes and clear-air echoes are mixed.展开更多
In this study, the physics-based device simulation tool Silvaco ATLAS is used to characterize the electrical properties of an AlGaN/GaN high electron mobility transistor (HEMT) with a U-type gate foot. The U-gate Al...In this study, the physics-based device simulation tool Silvaco ATLAS is used to characterize the electrical properties of an AlGaN/GaN high electron mobility transistor (HEMT) with a U-type gate foot. The U-gate AlGaN/GaN HEMT mainly features a gradually changed sidewall angle, which effectively mitigates the electric field in the channel, thus obtaining enhanced off-state breakdown characteristics. At the same time, only a small additional gate capacitance and decreased gate resistance ensure excellent RF characteristics for the U-gate device. U-gate AlGaN/GaN HEMTs are feasible through adjusting the etching conditions of an inductively coupled plasma system, without introducing any extra process steps. The simulation results are confirmed by experimental measurements. These features indicate that U-gate A1GaN/GaN HEMTs might be promising candidates for use in millimeter-wave power applications.展开更多
Channel estimation has been considered as a key issue in the millimeter-wave(mmWave)massive multi-input multioutput(MIMO)communication systems,which becomes more challenging with a large number of antennas.In this pap...Channel estimation has been considered as a key issue in the millimeter-wave(mmWave)massive multi-input multioutput(MIMO)communication systems,which becomes more challenging with a large number of antennas.In this paper,we propose a deep learning(DL)-based fast channel estimation method for mmWave massive MIMO systems.The proposed method can directly and effectively estimate channel state information(CSI)from received data without performing pilot signals estimate in advance,which simplifies the estimation process.Specifically,we develop a convolutional neural network(CNN)-based channel estimation network for the case of dimensional mismatch of input and output data,subsequently denoted as channel(H)neural network(HNN).It can quickly estimate the channel information by learning the inherent characteristics of the received data and the relationship between the received data and the channel,while the dimension of the received data is much smaller than the channel matrix.Simulation results show that the proposed HNN can gain better channel estimation accuracy compared with existing schemes.展开更多
Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as ...Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as a promising trend.Firstly,we present historical development and convergence technology concept for communication-radar systems,and highlight some emerging technologies in this area.We then provide an updated and comprehensive survey of several converged systems operating in different microwave and millimeter frequency bands,by providing some selective typical communication and radar sensing systems.In this part,we also summarize and compare the system performance in terms of maximum range/range resolution for radar mode and Bit Error Rate(BER)/wireless distance for communication mode.In the last section,the convergence of millimeter/terahertz communication-radar system is concluded by analyzing the prospect of millimeter-wave/terahertz technologies in providing ultrafast data rates and high resolution for our smart future.展开更多
This paper presented a novel millimeterwave channel measurement platform for the 6G intelligent railway.This platform used phased array antenna with 64 elements and can support instant bandwidth up to 1 GHz.Combined w...This paper presented a novel millimeterwave channel measurement platform for the 6G intelligent railway.This platform used phased array antenna with 64 elements and can support instant bandwidth up to 1 GHz.Combined with improved multi-tone sounding signals,the platform can enhance dynamic measurement capability in high-speed railway scenarios.We performed calibration works about frequency flatness,frequency offset and proved platform reliability with channel emulator based closed-loop verification.We also carried out field trials in high-speed railway carriage scenarios.Based on measurement results,we extracted channel characteristic parameters of path loss,power delay profile and delay spread to further verify the field measurement performance of the platform.展开更多
Roles of rare earth oxide (RE2O3) additives in millimeter-wave(MM) sintering of AIN were investigated from the standpoints of phase diagram, heating characteristics of rare earth oxides, and morphology of intergra...Roles of rare earth oxide (RE2O3) additives in millimeter-wave(MM) sintering of AIN were investigated from the standpoints of phase diagram, heating characteristics of rare earth oxides, and morphology of intergranular oxide phase. In the millimeter-wave sintering of AIN, densification temperature decreased with the decrease of the ionic radius of rare earth ion and was closely related with the eutectic temperature in the RE2Oa-Al2O3 binary system. The lowest densification temperature in the millimeter-wave sintering of AIN with Yb2O3 additive was attributed to the largest heating rate of Yb2O3-Al2O3 binary oxide under millimeter-wave radiation. Furthermore, the lowest densification temperature could be attained while selecting the Yb2O3 content so as to form the intergranular phase with the eutectic composition in the Yb2O3-Al2O3 binary system. The result showed good agreement with the above mentioned during the sintering of Si3N4 with Yb2O3-Al2O3 additive. From TEM observation, it was verified that film-like intergranular oxide phase formed under millimeter-wave radiation was favorable for attaining high thermal conductivity in the Yb2O3 added AINs.展开更多
An advanced conceptual design of a high-bit-rate triple product acousto-optical processor is presented that can be applied in a number of astrophysical problems. We briefly describe the Large Millimeter Telescope as o...An advanced conceptual design of a high-bit-rate triple product acousto-optical processor is presented that can be applied in a number of astrophysical problems. We briefly describe the Large Millimeter Telescope as one of the potential observational infrastructures where the acousto-optical spectrometer can be successfully used. A summary on the study of molecular gas in relatively old (age > 10 Myr) disks around main sequence stars is provided. We have identified this as one of the science cases in which the proposed processor can have a big impact. Then we put forward triple product acousto-optical processor is able to realize algorithm of the space-and-time integrating, which is desirable for a wideband spectrum analysis of radio-wave signals with an improved resolution providing the resolution power of about 105 - 106. It includes 1D-acousto-optic cells as the input devices for a 2D-optical data processing. The importance of this algorithm is based on exploiting the chirp Z-transform technique providing a 2D-Fourier transform of the input signals. The system produces the folded spectrum, accumulating advantages of both space and time integrating. Its frequency bandwidth is practically equal to the bandwidth of transducers inherent in acousto-optical cells. Then, similar processor is able to provide really high frequency resolution, which is practically equal to the reciprocal of the CCD-matrix photo-detector integration time. Here, the current state of developing the triple product acousto-optical processor in frames of the astrophysical instrumentation is shortly discussed.展开更多
The advanced design of a 10 × 1 linear antenna array system with the capa-bility of frequency tunability using GT3-23001 liquid crystal (LC) is pro-posed. The design for this reconfigurable wideband antenna array...The advanced design of a 10 × 1 linear antenna array system with the capa-bility of frequency tunability using GT3-23001 liquid crystal (LC) is pro-posed. The design for this reconfigurable wideband antenna array for 5G ap-plications at Ka-band millimeter-wave (mmw) consists of a double layer of stacked patch antenna with aperture coupled feeding. The bias voltage over LC varies from 0 V to 10.6 V to achieve a frequency tunability of 1.18 GHz. The array operates from 25.3 GHz to 33.8 GHz with a peak gain of 19.2 dB and a beamwidth of 5.2<span style="white-space:nowrap;">°</span> at 30 GHz. The proposed reconfigurable antenna ar-ray represents a real and efficient solution for the recent and future mmw 5G networks. The proposed antenna is suitable for 5G base stations in stadiums, malls and convention centers. It is proper for satellite communications and radars at mmw.展开更多
For 5G new radio(NR),there are two frequency bands:Frequency Range 1(FR‐1)(low frequency)and Frequency Range 2(FR‐2)(millimeter‐wave frequency).Millimeter‐wave has been officially utilized in mobile applications.T...For 5G new radio(NR),there are two frequency bands:Frequency Range 1(FR‐1)(low frequency)and Frequency Range 2(FR‐2)(millimeter‐wave frequency).Millimeter‐wave has been officially utilized in mobile applications.The wide bandwidth is the key for the millimeter-wave band.However,higher loss has become the major challenge for the wide use of this frequency range.Antenna array and beamforming technologies have been introduced to resolve the path loss and coverage problems.The key design considerations of the beamforming antenna array are low loss,compact system and small size.Antenna-in-package(AiP)has become the most attractive technology for millimeter-wave front-end system.For the design of AiP,many parameters such as RF transition,material and heat need to be considered and designed properly.The Over‐the‐Air(OTA)testing technology is also very critical for AiP mass production.In this paper,the detail of AiP design and new OTA testing technology are discussed and demonstrated.展开更多
Millimeter-wave(mmWave) communications are highly focused as a powerful mean enabling to perform very high data transmission. However it has several inherent shortcomings like directional transmission and serious atte...Millimeter-wave(mmWave) communications are highly focused as a powerful mean enabling to perform very high data transmission. However it has several inherent shortcomings like directional transmission and serious attenuation in atmosphere. So it is difficult to implement random access in mm Wave WLANs. In this paper, a heterogeneous control and data sub-network architecture is presented, which decouples the traditional WLAN into 2.4 or 5GHz control sub-network and mm Wave data sub-network in both PHY and MAC layers. In control sub-network, DCF is adopted to transmit control information and in data sub-network, PCF is adopted to ensure the Qo S. Moreover, an omnidirectional transmission is employed in the control sub-network to support users' random access. The data sub-network only covers the required serving area by using directional antennas for specific users and can be adjusted dynamically based on control information. Simulations indicate that compared with the conventional WLANs, heterogeneous mm Wave WLANs can provide both random access and high throughput.展开更多
It is a valuable issue to explore whether a flame can radiate microwaves,in spite of the electric field formed in the flame.Presented herein is an experimental study on a series of flames with millimeterwave radiation...It is a valuable issue to explore whether a flame can radiate microwaves,in spite of the electric field formed in the flame.Presented herein is an experimental study on a series of flames with millimeterwave radiation in the combustion of pyrotechnic films.The pyrotechnic films were composed of ultrafine red phosphorus(P),sodium nitrate(NaNO_3),Polyvinyl Alcohol(PVA) and some additives such as chopped carbon fibers(CFs) and aluminized glass fibers(GFs).The combustion temperatures and millimeter-wave radiation signals of the flames were measured,the millimeter-wave emissivity and spectral radiant exitance were calculated to describe the millimeter-wave radiation intensity.The results demonstrate that the flame of the pyrotechnic films based on P/NaNO_3/CFs can radiate millimeter waves,and different materials and their proportion have a great effect on the millimeter-wave radiation intensity.展开更多
Millimeter-wave radio-over-fiber techno- logy demonstrates the potential for providing wireless broad-band service in the next generation wireless communication system.Optical generation of millimeter-wave signal is o...Millimeter-wave radio-over-fiber techno- logy demonstrates the potential for providing wireless broad-band service in the next generation wireless communication system.Optical generation of millimeter-wave signal is one of the most important technologies of millimeter-wave radio-over-fiber system.The virtues and shortcomings of some ways of optical generation of millimeter-wave signal are discussed.Then optical millimeter-wave signal transmission perfor- mance is described.Finally,an overview of the millimeter-wave radio-over-fiber system is given.It is suggested that the millimeter-wave radio-over-fiber technology should be paid more attention,especially for modulators for optical generation of millimeter-wave signal and radio-over-fiber system.展开更多
Millimeter-wave communications are suitable for application to massive multiple-input multiple-output systems in order to satisfy the ever-growing data traffic demands of the next-generation wireless communication.How...Millimeter-wave communications are suitable for application to massive multiple-input multiple-output systems in order to satisfy the ever-growing data traffic demands of the next-generation wireless communication.However,their practical deployment is hindered by the high cost of complex hardware,such as radio frequency(RF)chains.To this end,operation in the beamspace domain,through beam selection,is a viable solution.Generally,the conventional beam selection schemes focus on the feedback and exhaustive search techniques.In addition,since the same beam in the beamspace may be assigned to a different user,conventional beam selection schemes suffer serious multi-user interference.In addition,some RF chains may be wasted,since they do not contribute to the sum-rate performance.Thus,a fingerprint-based beam selection scheme is proposed to solve these problems.The proposed scheme conducts offline group-based fingerprint database construction and online beam selection to mitigate multi-user interference.In the offline phase,the contributing users with the same best beam are grouped.After grouping,a fingerprint database is created for each group.In the online phase,beam selection is performed for purposes of interference mitigation using the information contained in the group-based fingerprint database.The simulation results confirm that the proposed beam selection scheme can achieve a signal-to-interference-plus-noise ratio and sum-rate performance which is close to those of a fully digital system,and having much higher energy efficiency.展开更多
基金supported by the National Natural Science Foundation of China(No.62171052 and No.61971054)the Fundamental Research Funds for the Central Universities(No.24820232023YQTD01).
文摘Millimeter-wave(mmWave)radar communication has emerged as an important technique for future wireless systems.However,the interference between the radar signal and communication data is the main issue that should be considered for the joint radar communication system.In this paper,a co-sharing waveform(CSW)is proposed to achieve communication and radar sensing simultaneously.To eliminate the co-interference between the communication and sensing signal,signal splitting and processing methods for communication data demodulation and radar signal processing are given respectively.Simulation results show that the bit error rate(BER)of CSW is close to that of the pure communication waveform.Moreover,the proposed CSW can achieve better performance than the existing waveforms in terms of range and velocity estimation.
文摘This work presents,design and specific absorption rate(SAR)analysis of a 37GHz antenna,for 5th Generation(5G)applications.The proposed antenna comprises of 4-elements of rectangular patch and an even distribution.The radiating element is composed of copper material supported by Rogers RT5880 substrate of thickness,0.254 mm,dielectric constant(εr),2.2,and loss tangent,0.0009.The 4-elements array antenna is compact in size with a dimension of 8mm×20mm in length and width.The radiating patch is excited with a 50 ohms connector i.e.,K-type.The antenna resonates in the frequency band of 37 GHz,that covers the 5G applications.The antenna behavior is studied both in free space and in the proximity of the human body.Three models of the human body,i.e.,belly,hand,and head(contain skin,fat,muscles,and bone)are considered for on-body simulations.At resonant frequency,the antenna gives a boresight gain of 11.6 dB.The antenna radiates efficiently with a radiated efficiency of more than 90%.Also,it is observed that the antenna detunes to the lowest in the proximity of the human body,but still a good impedance matching is achieved considering the−10 dB criteria.Moreover,SAR is also being presented.The safe limit of 2 W/kg for any 10 g of biological tissue,specified by the European International Electro Technical Commission(IEC)has been considered.The calculated values of SAR for human body models,i.e.,belly,hand and head are 1.82,1.81 and 1.09 W/kg,respectively.The SAR values are less than the international recommendations for the three models.Furthermore,the simulated and measured results of the antenna are in close agreement,which makes it,a potential candidate for the fifth-generation smart phones and other handheld devices.
基金supported by the National Natural Science Foundation of China(62201510,62001091,61801435,61871080,61801435)the Initial Scientific Research Foundation of University of Science and Technology of China(Y030202059018051)+2 种基金Yangtze River Scholar Program,Sichuan Science and Technology Program(2019JDJQ0014)111 Project(B17008)Henan Provincial Department of Science and Technology Research Project(202102210315,212102210029,202102210-137).
文摘This paper considers the non-line-of-sight(NLOS)vehicle localization problem by using millimeter-wave(MMW)automotive radar.Several preliminary attempts for NLOS vehicle detection are carried out and achieve good results.Firstly,an electromagnetic(EM)wave NLOS multipath propagation model for vehicle scene is established.Subsequently,with the help of available multipath echoes,a complete NLOS vehicle localiza-tion algorithm is proposed.Finally,simulation and experimental results validate the effectiveness of the established EM wave propagation model and the proposed NLOS vehicle localization algorithm.
文摘Unmanned aerial vehicle(UAV)has been widely used in many fields and is arousing global attention.As the resolution of the equipped sensors in the UAV becomes higher and the tasks become more complicated,much higher data rate and longer communication range are required in the foreseeable future.As the millimeter-wave(mm Wave)band can provide more abundant frequency resources than the microwave band,much higher achievable rate can be guaranteed to support UAV services such as video surveillance,hotspot coverage,and emergency communications,etc.The flexible mm Wave beamforming can be used to overcome the high path loss caused by the long propagation distance.In this paper,we study three typical application scenarios for mm Wave-UAV communications,namely communication terminal,access point,and backbone link.We present several key enabling techniques for UAV communications,including beam tracking,multi-beam forming,joint Tx/Rx beam alignment,and full-duplex relay techniques.We show the coupling relation between mm Wave beamforming and UAV positioning for mm Wave-UAV communications.Lastly,we summarize the challenges and research directions of mm Wave-UAV communications in detail.
文摘This study investigated the ability of millimeter-wave (MMW) to promote the differentiation of bone marrow stromal cells (BMSCs) into cells with a neural phenotype. The BMSCs were primarily cultured. At passage 3, the cells were induced by β-mercaptoethanol (BME) in combination with MMW or BME alone. The expressions of nucleostemin (NS) and neuron-specific enolase (NSE) were detected by immunofluorescent staining and Western blotting respectively to identify the differentiation. The untreated BMSCs predominately expressed NS. After induced by BME and MMW, the BMSCs exhibited a dramatic decrease in NS expression and increase in NSE expression. The differentiation rate of the cells treated with BME and MMW in combination was significantly higher than that of the cells treated with BME alone (P〈0.05). It was concluded that MMW exposure enhanced the inducing effect of BME on the differentiation of BMSCs into cells with a neural phenotype.
基金supported by the National Key R&D Pro-gram of China under Grant 2016YFB0402501in part by the Natural Science Foundation of China under grant 61605112Open Fund of IPOC under grant BUPT
文摘We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footprint of 1.1 × 2.1 mm^2 and integrates 7 independent channels each having on-chip polarization control and heterodyne mixing functions. 7 channels of4-Gb/s QPSK baseband signals are delivered via a 2-km multi-core fiber(MCF) and coupled into the chip with a local oscillator(LO) light. The polarization state of each signal light is automatically adjusted and aligned with that of the LO light, and then 7 channels of 28-GHz MMW carrying 4-Gb/s QPSK signals are generated by optical heterodyne beating. Automated polarizationcontrol function of each channel is also demonstrated with ~7-ms tuning time and ~27-dB extinction ratio.
文摘The fifth generation(5G)network communication systems operate in the millimeter waves and are expected to provide a much higher data rate in the multi-gigabit range,which is impossible to achieve using current wireless services,including the sub-6 GHz band.In this work,we briefly review several existing designs of millimeter-wave phased arrays for 5G applications,beginning with the low-profile antenna array designs that either are fixed beam or scan the beam only in one plane.We then move on to array systems that offer two-dimensional(2D)scan capability,which is highly desirable for a majority of 5G applications.Next,in the main body of the paper,we discuss two different strategies for designing scanning arrays,both of which circumvent the use of conventional phase shifters to achieve beam scanning.We note that it is highly desirable to search for alternatives to conventional phase shifters in the millimeter-wave range because legacy phase shifters are both lossy and costly;furthermore,alternatives such as active phase shifters,which include radio frequency amplifiers,are both expensive and power-hungry.Given this backdrop,we propose two different antenna systems with potential for the desired 2D scan performance in the millimeter-wave range.The first of these is a Luneburg lens,which is excited either by a 2D waveguide array or by a microstrip patch antenna array to realize 2D scan capability.Next,for second design,we turn to phased-array designs in which the conventional phase shifter is replaced by switchable PIN diodes or varactor diodes,inserted between radiating slots in a waveguide to provide the desired phase shifts for scanning.Finally,we discuss several approaches to enhance the gain of the array by modifying the conventional array configurations.We describe novel techniques for realizing both one-dimensional(1D)and 2D scans by using a reconfigurable metasurface type of panels.
基金supported by the National Key R&D Program of China(Grant No.2018YFC1506605)Sichuan Provincial Department of Education Scientific research projects(Grant No.16ZB0211)Chengdu University of Information Technology research and development projects(Grant No.CRF201705)。
文摘Millimeter-wave cloud radar(MMCR)provides the capability of detecting the features of micro particles inside clouds and describing the internal microphysical structure of the clouds.Therefore,MMCR has been widely applied in cloud observations.However,due to the influence of non-meteorological factors such as insects,the cloud observations are often contaminated by non-meteorological echoes in the clear air,known as clear-air echoes.It is of great significance to automatically identify the clear-air echoes in order to extract effective meteorological information from the complex weather background.The characteristics of clear-air echoes are studied here by combining data from four devices:an MMCR,a laser-ceilometer,an L-band radiosonde,and an all-sky camera.In addition,a new algorithm,which includes feature extraction,feature selection,and classification,is proposed to achieve the automatic identification of clear-air echoes.The results show that the recognition algorithm is fairly satisfied in both simple and complex weather conditions.The recognition accuracy can reach up to 95.86%for the simple cases when cloud echoes and clear-air echoes are separate,and 88.38%for the complicated cases when low cloud echoes and clear-air echoes are mixed.
基金Project supported by the Major Program of the National Natural Science Foundation of China (Grant No. 60890191) and the National Key Basic Research Program of China (Grant No. 2010CB327503).
文摘In this study, the physics-based device simulation tool Silvaco ATLAS is used to characterize the electrical properties of an AlGaN/GaN high electron mobility transistor (HEMT) with a U-type gate foot. The U-gate AlGaN/GaN HEMT mainly features a gradually changed sidewall angle, which effectively mitigates the electric field in the channel, thus obtaining enhanced off-state breakdown characteristics. At the same time, only a small additional gate capacitance and decreased gate resistance ensure excellent RF characteristics for the U-gate device. U-gate AlGaN/GaN HEMTs are feasible through adjusting the etching conditions of an inductively coupled plasma system, without introducing any extra process steps. The simulation results are confirmed by experimental measurements. These features indicate that U-gate A1GaN/GaN HEMTs might be promising candidates for use in millimeter-wave power applications.
基金supported by the National Key R&D Program of China(2018YFB1802004)111 Project(B08038)。
文摘Channel estimation has been considered as a key issue in the millimeter-wave(mmWave)massive multi-input multioutput(MIMO)communication systems,which becomes more challenging with a large number of antennas.In this paper,we propose a deep learning(DL)-based fast channel estimation method for mmWave massive MIMO systems.The proposed method can directly and effectively estimate channel state information(CSI)from received data without performing pilot signals estimate in advance,which simplifies the estimation process.Specifically,we develop a convolutional neural network(CNN)-based channel estimation network for the case of dimensional mismatch of input and output data,subsequently denoted as channel(H)neural network(HNN).It can quickly estimate the channel information by learning the inherent characteristics of the received data and the relationship between the received data and the channel,while the dimension of the received data is much smaller than the channel matrix.Simulation results show that the proposed HNN can gain better channel estimation accuracy compared with existing schemes.
基金supported in part by National Natural Science Foundation of China(NSFC)under Grant No.61771424in part by Natural Science Foundation of Zhejiang Province under Grant No.LZ18F010001.
文摘Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as a promising trend.Firstly,we present historical development and convergence technology concept for communication-radar systems,and highlight some emerging technologies in this area.We then provide an updated and comprehensive survey of several converged systems operating in different microwave and millimeter frequency bands,by providing some selective typical communication and radar sensing systems.In this part,we also summarize and compare the system performance in terms of maximum range/range resolution for radar mode and Bit Error Rate(BER)/wireless distance for communication mode.In the last section,the convergence of millimeter/terahertz communication-radar system is concluded by analyzing the prospect of millimeter-wave/terahertz technologies in providing ultrafast data rates and high resolution for our smart future.
基金supported in part by the Fundamental Research Funds for the Central Universities under Grant 2022JBQY004,2022JBZY018 and 2022JBXT001in part by the Basic Research Project of Jiangsu Province Frontier Leading Technology under Grant BK20212002.
文摘This paper presented a novel millimeterwave channel measurement platform for the 6G intelligent railway.This platform used phased array antenna with 64 elements and can support instant bandwidth up to 1 GHz.Combined with improved multi-tone sounding signals,the platform can enhance dynamic measurement capability in high-speed railway scenarios.We performed calibration works about frequency flatness,frequency offset and proved platform reliability with channel emulator based closed-loop verification.We also carried out field trials in high-speed railway carriage scenarios.Based on measurement results,we extracted channel characteristic parameters of path loss,power delay profile and delay spread to further verify the field measurement performance of the platform.
基金the Grant-in-Aid for Scientific Research on Priority Area (18070004) of MEXT, Japan
文摘Roles of rare earth oxide (RE2O3) additives in millimeter-wave(MM) sintering of AIN were investigated from the standpoints of phase diagram, heating characteristics of rare earth oxides, and morphology of intergranular oxide phase. In the millimeter-wave sintering of AIN, densification temperature decreased with the decrease of the ionic radius of rare earth ion and was closely related with the eutectic temperature in the RE2Oa-Al2O3 binary system. The lowest densification temperature in the millimeter-wave sintering of AIN with Yb2O3 additive was attributed to the largest heating rate of Yb2O3-Al2O3 binary oxide under millimeter-wave radiation. Furthermore, the lowest densification temperature could be attained while selecting the Yb2O3 content so as to form the intergranular phase with the eutectic composition in the Yb2O3-Al2O3 binary system. The result showed good agreement with the above mentioned during the sintering of Si3N4 with Yb2O3-Al2O3 additive. From TEM observation, it was verified that film-like intergranular oxide phase formed under millimeter-wave radiation was favorable for attaining high thermal conductivity in the Yb2O3 added AINs.
文摘An advanced conceptual design of a high-bit-rate triple product acousto-optical processor is presented that can be applied in a number of astrophysical problems. We briefly describe the Large Millimeter Telescope as one of the potential observational infrastructures where the acousto-optical spectrometer can be successfully used. A summary on the study of molecular gas in relatively old (age > 10 Myr) disks around main sequence stars is provided. We have identified this as one of the science cases in which the proposed processor can have a big impact. Then we put forward triple product acousto-optical processor is able to realize algorithm of the space-and-time integrating, which is desirable for a wideband spectrum analysis of radio-wave signals with an improved resolution providing the resolution power of about 105 - 106. It includes 1D-acousto-optic cells as the input devices for a 2D-optical data processing. The importance of this algorithm is based on exploiting the chirp Z-transform technique providing a 2D-Fourier transform of the input signals. The system produces the folded spectrum, accumulating advantages of both space and time integrating. Its frequency bandwidth is practically equal to the bandwidth of transducers inherent in acousto-optical cells. Then, similar processor is able to provide really high frequency resolution, which is practically equal to the reciprocal of the CCD-matrix photo-detector integration time. Here, the current state of developing the triple product acousto-optical processor in frames of the astrophysical instrumentation is shortly discussed.
文摘The advanced design of a 10 × 1 linear antenna array system with the capa-bility of frequency tunability using GT3-23001 liquid crystal (LC) is pro-posed. The design for this reconfigurable wideband antenna array for 5G ap-plications at Ka-band millimeter-wave (mmw) consists of a double layer of stacked patch antenna with aperture coupled feeding. The bias voltage over LC varies from 0 V to 10.6 V to achieve a frequency tunability of 1.18 GHz. The array operates from 25.3 GHz to 33.8 GHz with a peak gain of 19.2 dB and a beamwidth of 5.2<span style="white-space:nowrap;">°</span> at 30 GHz. The proposed reconfigurable antenna ar-ray represents a real and efficient solution for the recent and future mmw 5G networks. The proposed antenna is suitable for 5G base stations in stadiums, malls and convention centers. It is proper for satellite communications and radars at mmw.
文摘For 5G new radio(NR),there are two frequency bands:Frequency Range 1(FR‐1)(low frequency)and Frequency Range 2(FR‐2)(millimeter‐wave frequency).Millimeter‐wave has been officially utilized in mobile applications.The wide bandwidth is the key for the millimeter-wave band.However,higher loss has become the major challenge for the wide use of this frequency range.Antenna array and beamforming technologies have been introduced to resolve the path loss and coverage problems.The key design considerations of the beamforming antenna array are low loss,compact system and small size.Antenna-in-package(AiP)has become the most attractive technology for millimeter-wave front-end system.For the design of AiP,many parameters such as RF transition,material and heat need to be considered and designed properly.The Over‐the‐Air(OTA)testing technology is also very critical for AiP mass production.In this paper,the detail of AiP design and new OTA testing technology are discussed and demonstrated.
基金supported in part by National Natural Science Foundation of China(No.61372070)Natural Science Basic Research Plan in Shaanxi Province of China(2015JM6324)+2 种基金Hong Kong,Macao and Taiwan Science & Technology Cooperation Program of China(2014DFT10320)EU FP7 Project MONICA(PIRSES-GA-2011-295222)the 111 Project(B08038)
文摘Millimeter-wave(mmWave) communications are highly focused as a powerful mean enabling to perform very high data transmission. However it has several inherent shortcomings like directional transmission and serious attenuation in atmosphere. So it is difficult to implement random access in mm Wave WLANs. In this paper, a heterogeneous control and data sub-network architecture is presented, which decouples the traditional WLAN into 2.4 or 5GHz control sub-network and mm Wave data sub-network in both PHY and MAC layers. In control sub-network, DCF is adopted to transmit control information and in data sub-network, PCF is adopted to ensure the Qo S. Moreover, an omnidirectional transmission is employed in the control sub-network to support users' random access. The data sub-network only covers the required serving area by using directional antennas for specific users and can be adjusted dynamically based on control information. Simulations indicate that compared with the conventional WLANs, heterogeneous mm Wave WLANs can provide both random access and high throughput.
基金support for this work was provided by the National Natural Science Foundation of China(Project No.51676100)。
文摘It is a valuable issue to explore whether a flame can radiate microwaves,in spite of the electric field formed in the flame.Presented herein is an experimental study on a series of flames with millimeterwave radiation in the combustion of pyrotechnic films.The pyrotechnic films were composed of ultrafine red phosphorus(P),sodium nitrate(NaNO_3),Polyvinyl Alcohol(PVA) and some additives such as chopped carbon fibers(CFs) and aluminized glass fibers(GFs).The combustion temperatures and millimeter-wave radiation signals of the flames were measured,the millimeter-wave emissivity and spectral radiant exitance were calculated to describe the millimeter-wave radiation intensity.The results demonstrate that the flame of the pyrotechnic films based on P/NaNO_3/CFs can radiate millimeter waves,and different materials and their proportion have a great effect on the millimeter-wave radiation intensity.
文摘Millimeter-wave radio-over-fiber techno- logy demonstrates the potential for providing wireless broad-band service in the next generation wireless communication system.Optical generation of millimeter-wave signal is one of the most important technologies of millimeter-wave radio-over-fiber system.The virtues and shortcomings of some ways of optical generation of millimeter-wave signal are discussed.Then optical millimeter-wave signal transmission perfor- mance is described.Finally,an overview of the millimeter-wave radio-over-fiber system is given.It is suggested that the millimeter-wave radio-over-fiber technology should be paid more attention,especially for modulators for optical generation of millimeter-wave signal and radio-over-fiber system.
基金The Ministry of Science and ICT(MSIT),Korea,under the Information Technology Research Center(ITRC)support program(IITP-2020-2016-0-00314)supervised by the Institute for Information&communications Technology Planning&Evaluation(IITP)was supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT:Ministry of Science and ICT)(2018R1A2B6002255 and 2020R1I1A1A01073948).
文摘Millimeter-wave communications are suitable for application to massive multiple-input multiple-output systems in order to satisfy the ever-growing data traffic demands of the next-generation wireless communication.However,their practical deployment is hindered by the high cost of complex hardware,such as radio frequency(RF)chains.To this end,operation in the beamspace domain,through beam selection,is a viable solution.Generally,the conventional beam selection schemes focus on the feedback and exhaustive search techniques.In addition,since the same beam in the beamspace may be assigned to a different user,conventional beam selection schemes suffer serious multi-user interference.In addition,some RF chains may be wasted,since they do not contribute to the sum-rate performance.Thus,a fingerprint-based beam selection scheme is proposed to solve these problems.The proposed scheme conducts offline group-based fingerprint database construction and online beam selection to mitigate multi-user interference.In the offline phase,the contributing users with the same best beam are grouped.After grouping,a fingerprint database is created for each group.In the online phase,beam selection is performed for purposes of interference mitigation using the information contained in the group-based fingerprint database.The simulation results confirm that the proposed beam selection scheme can achieve a signal-to-interference-plus-noise ratio and sum-rate performance which is close to those of a fully digital system,and having much higher energy efficiency.