Damage Evolution of Ballastless Track Concrete Exposed to Flexural Fatigue Loads:The Application of Ultrasonic Pulse Velocity,Impact-echo and Surface Electrical Resistance Method

In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variable based on the change of velocity of ultrasonic pulse(Du) and impact elastic wave(Di)were defined according to the classical damage theory.The influences of stress level,loading frequency and concrete strength on damage variable were measured.The experimental results show that Du and Di both present a three-stages trend for concrete exposed to fatigue loads.Since impact elastic wave is more sensitive to the microstructure damage in stage Ⅲ,the critical damage variable,i e,the damage variable before the final fracture of concrete of Di is slightly higher than that of Du.Meanwhile,the evolution of SR of concrete exposed to fatigue loads were analyzed and the relationship between SR and Du,SR and Di of concrete exposed to fatigue loads were established.It is found that the SR of concrete was decreased with the increasing fatigue cycles,indicating that surface electrical resistance method can also be applied to describe the damage of ballastless track concrete exposed to fatigue loads.

Investigation of Surface Damage in Forming of High Strength and Galvanized Steel Sheets

Powdering/exfoliating of coatings and scratching galvanized steels and high strength steels （HSS）, are the main forms of surface damage in the forming of which result in increased die maintenance cost and scrap rate. In this study, a special rectangular box was developed to investigate the behavior and characteristics of surface damage in sheet metal forming （SMF） processes. U-channel forming tests were conducted to study the effect of tool hardness on surface damage in the forming of high strength steels and galvanized steels （hot-dip galvanized and galvannealed steels）. Experimental results indicate that sheet deformation mode influences the severity of surface damage in SMF and surface damage occurs easily at the regions where sheet specimen deforms under the action of compressive stress. Die corner is the position where surface damage initiates. For HSS sheet, surface damage is of major interest due to high forming pressure. The HSS and hot-dip galvanized steels show improved ability of damage-resistance with increased hardness of the forming tool. However, for galvannealed steel it is not the forming tool with the highest hardness value that performs best.

Characteristics of Laser-Induced Surface and Bulk Damage of Large-Aperture Deuterated Potassium Dihydrogen Phosphate at 351 nm

Deuterated potassium dihydrogen phosphate damage performance at 351 nm is studied on a large-aperture laser system. Bulk and rear-surface damage are initiated under the 3ω fluences of 6.T J/cm2 and 33/cm2, and show different growth characteristics under multiple laser irradiations with the fluence of 6 J/cm2. The size and number of bulk damage keep unchanged once initiated. However, surface damage size also does not grow, while surface damage number increases linearly with laser shots. Different damage thresholds and growth behaviors suggest different formations of bulk and surface damage precursors. The cause of surface damage is supposed to be near-surface absorbing particles buried under the sol-gel coating.

Bulk and surface damages in complementary bipolar junction transistors produced by high dose irradiation

Two complementary types NPN and PNP of bipolar junction transistors （BJTs） were exposed to higll dose of neutrons and gamma rays. The change in the base and collector currents, minority carriers lifetime, and current gain factor/3 with respect to the dose were analyzed. The contributions of the base current according to the defect types were also reported. It was declared that the radiation effect of neutrons was almost similar between the two transistor types, this effect at high dose may decrease the value of/3 to less than one. The Messenger-Spratt equation was used to describe the experimental results in this case. However, the experimental data demonstrated that the effect of gamma rays was generally higher on NPN than PNP transistors. This is mainly attributed to the difference in the behavior of the trapped positive charges in the SiO2 layers. Meanwhile, this difference tends to be small for high gamma dose.

Surface Damage in Wire cut Silicon Wafers

The surface damage and the damage depth in wire-cut silicon wafers and inner-diameter (ID) cut silicon wafers were studied by means of thickness meter, scanning electron microscopy (SEM) and double crystal X-ray diffractometer. The results show that the surface of wire-cut silicon wafers is rougher than that of ID-cut silicon wafers and the surface damage in wire-cut silicon wafers is more serious than that in ID-cut silicon wafers, while the damage depth in wire-cut silicon wafers is smaller than that in ID-cut silicon wafers. The possible reasons for the generation of surface damage in wire-cut silicon wafers were also discussed.

Characterization of surface damage of a solid plate under tensile loading using nonlinear Rayleigh waves

This letter reports experimental observation of a direct correlation between the acoustic nonlinearity parameter (NP) measured with nonlinear Rayleigh waves and the accumulation of plasticity damage in an AZ31 magnesium alloy plate specimen.Rayleigh waves are generated and detected with wedge transducers,and the NPs are measured at different stress levels.The results show that there is a significant increase in the NPs with monotonic tensile loads surpassing the material’s yielding stress.The research suggests an effective nondestructive evaluation method to track the surface damage in metals.

The Effect of Laser Ablation Pulse Width and Feed Speed on Necrosis and Surface Damage of Cortical Bone

Bone cutting is of importance in orthopaedic surgery but is also challenging due to its nature of brittleness—where severe mechanical and thermal damages can be introduced easily in conventional machining.Laser machining is a new technology that can allow for complex cut geometries whilst minimising surface defects i.e.,smearing,which occur in mechanical methods.However,comparative studies on the influence of lasers with different pulse characteristics on necrotic damage and surface integrity have not been reported yet.This paper for the first time investigates the effects of laser type on the necrotic damage and surface integrity in fresh bovine cortical bone after ex-situ laser machining.Three lasers of different pulse widths,i.e.,picosecond,nanosecond and continuous wave lasers have been investigated with different feed speeds tested to study the machining efficiency.The cutting temperature,and geometrical outputs have been measured to investigate the thermal influence on the cooling behaviour of the bone samples while high-speed imaging was used to compare the material removal mechanisms between a pulsed and continuous wave laser.Furthermore,an in-depth histological analysis of the subsurface has revealed that the nanosecond laser caused the largest necrotic depth,owing to the high pulse frequency limiting the dissipation of heat.It has also been observed that surface cracks positioned perpendicular to the trench direction were produced after machining by the picosecond laser,indicative of the photomechanical effect induced by plasma explosions.Therefore,the choice of laser type(i.e.,in terms of its pulse width and frequency)needs to be critically considered for appropriate application during laser osteotomy with minimum damage and improved healing.

A DUAL-SURFACE DAMAGE MODEL AND EVALUATION FOR NATURAL SOILS WITHIN THE THERMOMECHANICAL FRAMEWORK

Naturally deposited or residual soils exhibit more complicated behavior than remolded clays. A dual-surface damage model for structured soils is developed based on the thermodynamics framework established in our first paper. The shift stresses and the transformation between the generalized dissipative stress space and actual stress space are established following a systematic procedure. The corresponding constitutive behavior of the proposed model is determined, which reflects the internal structural configuration and damage behavior for geomaterials. Four evolution variables κj^i（i=D, R;j=V, S） and the basic parameters λ, s, v and e0 are introduced to account for the progressive loss of internal structure for natural clays. A series of fully triaxial tests and isotropic compression tests are performed for structured and reconstituted samples of Beijing and Zhengzhou natural clays. The validation of the proposed model is examined by comparing the numerical results with the experimental data.

Extended damage range of(Al0.3Cr0.2Fe0.2Ni0.3)3O4 high entropy oxide films induced by surface irradiation

Irradiation makes structural materials of nuclear reactors degraded and failed.However,the damage process of materials induced by irradiation is not fully elucidated,mostly because the charged particles only bombarded the surface of the materials(within a few microns).In this work,we investigated the effects of surface irradiation on the indirect irradiation region of the(Al0.3Cr0.2Fe0.2Ni0.3)3O4 high entropy oxide(HEO)films in detail by plasma surface interaction.The results show that the damage induced by surface irradiation significantly extends to the indirect irradiation region of HEO film where the helium bubbles,dislocations,phase transformation,and the nickel oxide segregation were observed.

INVESTIGATION OF SURFACE DAMAGE OF LiNbO_3 IMPLANTED BY Ti ION

In this paper, damages and annealing effects of X,Y and Z cut LiNbO-3 implanted by 350keV high energy Ti (1.5 x 1017 / cm2) are studied. The surface damages of X,Y cut plates are nearly amorphous, but the surface damage of Z cut does not reach saturation. Radiation damage is mainly due to Nb moving atoms and Ti atoms occupy the interstitial sites. By annealing the sample at 1000℃, most damage is removed from the boundary between implanted layer and LiNbO3 base to surface.

The Innovation of Surface Damage Detectionof Metallic Members

Exoelectron is low energy electrons delayed emission from a metallic member surface.The fatigue damage of the metallic often happens under the action of a dynamic load. Theaccumulation of fatigue damage of metallic frames leads to the result of surface fatiguemicrocracks. Microcracks would result in the exoelectrons emission. In this paper therelationship between exoelectrons emission and the fatigue damage microcracks of metallicframes is studied. A new type of the Double Grid Air Counter (DGAC) was designed.Experiments have shown that the systems of the DGAC are sound and work efficiently, and themeasurement precision was important, and valuable in study and detection of formation andgrowth of microcracks of the metallic members surface in the initial stage offatigue da,nage.

Experimental Study on the Reduction Effect of Pit Texture on Disassembly Damage for Interference Fit

After remanufacturing disassembly,several kinds of friction damages can be found on the mating surface of interference fit.These damages should be repaired and the cost is closely related to the severity of damages.Inspired by the excellent performance of surface texture in wear reduction,5 shapes of pit array textures are added to the specimens’surface to study their reduction effect of disassembly damage for interference fit.The results of disassembly experiments show that the order of influence of texture parameters on disassembly damage is as follows:equivalent circle diameter of single texture,texture shape and texture surface density.The influence of equivalent circle diameter of single texture and texture shape are obviously more significant than that of texture surface density.The circular texture with a surface density of 30%and a diameter of 100μm shows an excellent disassembly damage reduction effect because of its perfect ability of abrasive particle collection.And the probability of disassembly damage formation and evolution is also relatively small on this kind of textured surface.Besides,the load-carrying capacity of interference fit with the excellent texture is confirmed by load-carrying capacity experiments.The results show that the load-carrying capacity of the excellent texture surface is increased about 40%compared with that of without texture.This research provides a potential approach to reduce disassembly damage for interference fit.

Building Damage Extraction from Post-earthquake Airborne LiDAR Data

Building collapse is a significant cause of earthquake-related casualties; therefore, the rapid assessment of buildings damage is important for emergency management and rescue. Airborne light detection and ranging （LiDAR） can acquire point cloud data in combination with height values, which in turn provides detailed information on building damage. However, the most previous approaches have used optical images and LiDAR data, or pre- and post-earthquake LiDAR data, to derive building damage information. This study applied surface normal algorithms to extract the degree of building damage. In this method, the angle between the surface normal and zenith （0） is used to identify damaged parts of a building, while the ratio of the standard deviation to the mean absolute deviation （σ/δ） of θ is used to obtain the degree of building damage. Quantitative analysis of 85 individual buildings with different roof types （i.e., flat top or pitched roofs） was conducted, and the results confirm that post-earthquake single LiDAR data are not affected by roof shape. Furthermore, the results confirm that θ is correlated to building damage, and that σ/δ represents an effective index to identify the degree of building damage.

Modelling of spall damage in ductile materials and its application to the simulation of the plate impact on copper

A statistical model of dynamic spall damage due to void nucleation and growth is proposed for ductile materials under intense loading, which takes into account inertia, the elastic-plastic effect, and initial void size. To some extent, void interaction could be accounted for in this approach. Based on this model, the simulation of spall experiments for copper is performed by using the Lagrangian finite element method. The simulation results are in good agreement with experimental data for the free surface velocity profile, stress record behind copper target, final porosity, and void concentrations across the target. The influence of elastic-plastic effect upon the damage evolution is explored. The correlation between the damage evolution and the history of the stress near the spall plane is also analyzed.

Investigation of FE Model Size Definition for Surface Coating Application

An efficient prediction mechanical performance of coating structures has been a constant concern since the dawn of surface engineering. However, predictive models presented by initial research are normally based on traditional solid mechanics, and thus cannot predict coating performance accurately. Also, the high computational costs that originate from the exclusive structure of surface coating systems （a big difference in the order of coating and substrate） are not well addressed by these models. To fill the needs for accurate prediction and low computational costs, a multi-axial continuum damage mechanics （CDM）-based constitutive model is introduced for the investigation of the load bearing capacity and fracture properties of coatings. Material parameters within the proposed constitutive model are determined for a typical coating （TIN） and substrate （Cu） system. An efficient numerical subroutine is developed to implement the determined constitutive model into the commercial FE solver, ABAQUS, through the user-defined subroutine, VUMAT. By changing the geometrical sizes of FE models, a series of computations are carried out to investigate （1） loading features, （2） stress distributions, and （3） failure features of the coating system. The results show that there is a critical displacement corresponding to each FE model size, and only if the applied normal loading displacement is smaller than the critical displacement, a reasonable prediction can be achieved. Finally, a 3D map of the critical displacement is generated to provide guidance for users to determine an FE model with suitable geometrical size for surface coating simulations. This paper presents an effective modelling approach for the prediction of mechanical performance of surface coatings.

Hardening Effect on Machined Surface for Precise Hard Cutting Process with Consideration of Tool Wear

During hard cutting process there is severe thermodynamic coupling effect between cutting tool and workpiece, which causes quenching effect on finished surfaces under certain conditions. However, material phase transformation mechanism of heat treatment in cutting process is different from the one in traditional process, which leads to changes of the formation mechanism of damaged layer on machined workpiece surface. This paper researches on the generation mechanism of damaged layer on machined surface in the process of PCBN tool hard cutting hardened steel Cr12MoV. Rules of temperature change on machined surface and subsurface are got by means of finite element simulation. In phase transformation temperature experiments rapid transformation instrument is employed, and the effect of quenching under cutting conditions on generation of damaged layer is revealed. Based on that, the phase transformation points of temperature under cutting conditions are determined. By experiment, the effects of cutting speed and tool wear on white layer thickness in damaged layer are revealed. The temperature distribution law of third deformation zone is got by establishing the numerical prediction model, and thickness of white layer in damaged layer is predicted, taking the tool wear effect into consideration. The experimental results show that the model prediction is accurate, and the establishment of prediction model provides a reference for wise selection of parameters in precise hard cutting process. For the machining process with high demanding on surface integrity, the generation of damaged layer on machined surface can be controlled precisely by using the prediction model.

Surface modifications of biometallic commercially pure Ti and Ti–13Nb–13Zr alloy by picosecond Nd:YAG laser

The effects of picosecond Nd:YAG laser irradiation on chemical and morphological surface characteristics of the commercially pure titanium and Ti–13Nb–13Zr alloy in air and argon atmospheres were studied under different laser output energy values.During the interaction of laser irradiation with the investigated materials,a part of the energy was absorbed on the target surface,influencing surface modifications.Laser beam interaction with the target surface resulted in various morphological alterations,resulting in crater formation and the presence of microcracks and hydrodynamic structures.Moreover,different chemical changes were induced on the target materials’surfaces,resulting in the titanium oxide formation in the irradiation-affected area and consequently increasing the irradiation energy absorption.Given the high energy absorption at the site of interaction,the dimensions of the surface damaged area increased.Consequently,surface roughness increased.The appearance of surface oxides also led to the increased material hardness in the surface-modified area.Observed chemical and morphological changes were pronounced after laser irradiation of the Ti–13Nb–13Zr alloy surface.

Rail RCF damage quantification and comparison for different damage models

There are several fatigue-based approaches that estimate the evolution of rolling contact fatigue(RCF) on rails over time and built to be used in tandem with multibody simulations of vehicle dynamics. However, most of the models are not directly comparable with each other since they are based on different physical models even though they shall predict the same RCF damage at the end.This article studies different approaches to quantifying RCF and puts forward a measure for the degree of agreement between them. The methodological framework studies various steps in the RCF quantification procedure within the context of one another, identifies the ‘primary quantification step’ in each approach and compares results of the fatigue analyses. In addition to this, two quantities—‘similarity’ and ‘correlation’—have been put forward to give an indication of mutual agreement between models.Four widely used surface-based and sub-surface-based fatigue quantification approaches with varying complexities have been studied. Different operational cases corresponding to a metro vehicle operation in Austria have been considered for this study. Results showed that the best possible quantity to compare is the normalized damage increment per loading cycle coming from different approaches. Amongst the methods studied, approaches that included the load distribution step on the contact patch showed higher similarity and correlation in their results.While the different approaches might qualitatively agree on whether contact cases are ‘damaging’ due to RCF, they might not quantitatively correlate with the trends observed for damage increment values.

Probability Analysis for the Damage of Gravity Dam

Damage reliability analysis is an emerging field of structural engineering which is very significant in structures of great importance like arch dams, large concrete gravity dams etc. The research objective is to design and construct an improved method for damage reliability analysis for concrete gravity dam. Firstly, pseudo excitation method and Mazar damage model were used to analyze how to calculate damage expected value excited by random seismic loading and deterministic static load on the condition that initial elastic modulus was deterministic. Moreover, response surface method was improved from the aspects of the regression of sample points, the selection of experimental points, the determined method of weight matrix and the calculation method of checking point respectively. Then, the above method was used to analyze guarantee rate of damage expected value excited by random seismic loading and deterministic static load on the condition that initial elastic modulus was random. Finally, a test example was given to verify and analyze the convergence and stability of this method. Compared with other conventional algorithm, this method has some strong points: this algorithm has good convergence and stability and greatly enhances calculation efficiency and the storage efficiency. From what has been analyzed, we find that damage expected value is insensitive to the randomness of initial elastic modulus so we can neglect the randomness of initial elastic modulus in some extent when we calculate damage expected value.

Monitoring damage evolution of steel strand using acoustic emission technique and rate process theory

Utilizing the acoustic emission(AE) technique, an experimental investigation into the damage evolution for steel strand under axial tension was described. The damage evolution model for steel stand relating the damage evolution to acoustic emission parameters was proposed by incorporating the AE rate process theory. The AE monitoring results indicate that damages occur in both elastic and plastic phases of steel strand. In elastic phase, AE signals are mainly sent out from the micro damage due to the surface friction among the wires of steel strand, while in plastic phase, AE signals emitted from the plastic deformation of wires. In addition, the AE cumulative parameters curves closely resemble the loading curve. The AE cumulative parameters curves can well describe the damage evolution process including the damage occurrence and damage development for steel strands. It is concluded that the AE technique is an effective and useful nondestructive technique for evaluating the damage characteristics of steel strand.