Modal characteristics analysis for a flexible rotor with non-smooth constraint due to intermittent rub-impact

Intermittent rub-impact, during which the contact between rotor and stator is characterized by a ‘‘bouncing＂ or intermittent type of behavior, is one of the most common rubbing forms in rotating machinery. When the intermittent rub-impact occurs, the non-smooth constraint, which is the phenomenon that the system stiffness changes with respect to the state of contact and noncontact, will appear. The paper aims at discovering the possible effects of the non-smooth constraint on the flexible rotor＇s modal characteristics by theoretical and experimental methods. The qualitative description for non-smooth constraint is given for the intermittent rub-impact process, and the dynamic modeling for a rotor system with non-smooth constraint is carried out. Meanwhile, the analysis method is developed by Floquet theory and Hill＇s method to obtain the rotor＇s modal characteristics. The results reveal that the non-smooth constraint produced by the intermittent rubimpact will increase the modal frequencies and critical speeds of the rotor system significantly.Due to the time-varying features of the constraint stiffness, the modal frequencies for the intermittent rub-impact rotor present fluctuant changes with the increase of rotation speed, which is different from the general linear rotor system. The non-smooth constraint is possible to lead the rotor＇s instability, and the rotor＇s instable regions can be expanded significantly for the increase of average constraint stiffness, constraint amplitude and contact time ratio. Non-smooth constraint could also expand the resonance speed and resonance sideband of the rotor system, which sometimes results in amplitude jump phenomenon.

Analysis and Flexible Structural Modeling for Oscillating Wing Utilizing Aeroelasticity

Making use of modal characteristics of the natural vibration of flexible structure to design the oscillating wing aircraft is proposed. A series of equations concerning the oscillating wing of flexible structures are derived. The kinetic equation for aerodynamic force coupled with elastic movement is set up, and relevant formulae are derived. The unsteady aerodynamic one in that formulae is revised. The design principle, design process and range of application of such oscillating wing analytical method are elaborated. A flexible structural oscillating wing model is set up, and relevant time response analysis and frequency response analysis are conducted. The analytical results indicate that adopting the new-type driving way for the oscillating wing will not have flutter problems and will be able to produce propulsive force. Furthermore, it will consume much less power than the fixed wing for generating the same lift.

Modal analysis strategy and nonlinear dynamic characteristics of complicated aero-engine dual-rotor system with rub-impact

This paper aims to gain insight into the nonlinear modal characteristics and the possible influence of the modes on the responses for the practical dual-rotor system with rub-impact in aero-engine.The finite solid element method combined with a constraint stiffness model produced by rub-impact is introduced to build the governing equation of the complicated nonlinear dual-rotor system.In order to deal with the efficiency and numerical divergence in the process of solving the nonlinear modes of this large-scale nonlinear system,an analysis strategy is proposed by integrating a two-layer reduction technique into the harmonic balance method.The effectiveness of the analysis strategy is validated by applying to a simple rotor system,which can easily obtain the theoretical result.Based on the modeling method and analysis strategy,the modal characteristics of an aero-engine dual-rotor system with rub-impact are revealed.The results show that the modal frequency of the dual-rotor system increases when rub-impact occurs and has the feature of interval,which allows us to obtain the critical speeds of the rubbing system by traditional Campbell diagram.The rotation direction is an important factor since it can not only affect the gyroscopic effect but also change the friction effect of the rub-impact.It is found that the modal frequencies of the counter-rotation dual-rotor are less than those of co-rotation condition.More importantly,the forward modes of the counter-rotation dual-rotor may be instable when rub-impact occurs at a certain rotor,while the corresponding modes under the co-rotation condition are always stable.Furthermore,by analyzing the rubbing response of the dual-rotor,it is found that the modal characteristics have an important influence on rotor’s response.The instable forward modes existing in the counter-rotation dual-rotor may lead to the divergence of the response when passing the corresponding critical speed.

An Intelligent Non-Collocated Control Strategy for Ball-Screw Feed Drives with Dynamic Variations

The ball-screw feed drive has varying high-order dynamic characteristics due to flexibilities of the slender screw spindle and joints between components, and an obvious feature of non-collocated control when a direct position measurement using a linear＇scale is employed. The dynamic characteristics and non- collocated situation have long been the source of difficulties in motion and vibration control, and deterio- rate the achieved accuracy of the axis motion. In this study, a dynamic model using a frequency-based sub- structure approach is established, considering the flexibilities and their variation. The position-dependent variation of the dynamic characteristics is then fully investigated. A corresponding control strategy, which is composed of a modal characteristic modifier （MCM） and an intelligent adaptive tuning algorithm （ATA）, is then developed. The MCM utilizes a combination of peak filters and notch filters, thereby shaping the plant dynamics into a virtual collocated system and avoiding control spillover. An ATA using an artificial neural network （ANN） as a smooth parameter interpolator updates the parameters of the filters in real time in order to cope with the feed drive＇s dynamic variation. Numerical verification of the effectiveness and robustness of the orooosed strategy is shown for a real feed drive.

Detection of Blade Mistuning in a Low Pressure Turbine Rotor Resulting from Manufacturing Tolerances and Differences in Blade Mounting

For a serious prediction of vibration characteristics of any structure, a detailed knowledge of the modal characteristic is essential. This is especially important for bladed turbine rotors. Mistuning of the blading of a turbine rotor can appear due to manufacturing tolerances or because of the blading process itself due to unequal mounting of the blades into the disk. This paper investigates the mistuning of the individual blades of a low pressure turbine with respect to the effects mentioned above. Two different rotors with different aerodynamic design of the blades were investigated. The blades were mounted to the disk with a so-called hammer head root which is especially prone to mounting irregularities. For detailed investigations, the rotor was excited with a shaker system to detect the forced response behavior of the individual blades. The measurements were done with a laser vibrometer system. As the excitation of rotor structure was held constant during measurement, it was possible to detect the line of nodes and mode shapes as well. It could be shown that the assembly process has an influence on the mistuning. The data were analyzed and compared with numerical results. For this, different contact models and boundary conditions were used. The above described characterization of modal behavior of the rotor is the basis for the upcoming aeroelastic investigations and especially for the blade vibration measurements of the rotor, turning with design and off-design speeds.

Characteristics of motorized spindle supported by active magnetic bearings

A motorized spindle supported by active magnetic bearings（AMBs） is generally used for ultra-high-speed machining. Iron loss of radial AMB is very great owing to high rotation speed, and it will cause severe thermal deformation. The problem is particularly serious on the occasion of large power application, such as all electric aero-engine. In this study, a prototype motorized spindle supported by five degree-of-freedom AMBs is developed. Homopolar and heteropolar AMBs are independently adopted as radial bearings. The influences of the two types of radial AMBs on the dynamic characteristics of the motorized spindle are comparatively investigated by theoretical analysis, test modal analysis and actual operation of the system. The iron loss of the two types of radial AMBs is analyzed by finite element software and verified through run-down experiments of the system. The results show that the structures of AMB have less influence on the dynamic characteristics of the motorized spindle. However, the homopolar structure can effectively reduce the iron loss of the radial AMB and it is useful for improving the overall performance of the motorized spindle.