When using H_∞ techniques to design decentralized controllers for large systems, the whole system is divided into subsystems, which are analysed using H_∞ control theory before being recombined. An analogy was estab...When using H_∞ techniques to design decentralized controllers for large systems, the whole system is divided into subsystems, which are analysed using H_∞ control theory before being recombined. An analogy was established with substructural analysis in structural mechanics, in which H_∞ decentralized control theory corresponds to substructural modal synthesis theory so that the optimal H_∞ norm of the whole system corresponds to the fundamental vibration frequency of the whole structure. Hence, modal synthesis methodology and the extended Wittrick_Williams algorithm were transplanted from structural mechanics to compute the optimal H_∞ norm of the control system. The orthogonality and the expansion theorem of eigenfunctions of the subsystems H_∞ control are presented in part (Ⅰ) of the paper. The modal synthesis method for computation of the optimal H_∞ norm of decentralized control systems and numerical examples are presented in part (Ⅱ).展开更多
Free-interface dual-compatibility modal synthesis method(compatibility of both force and displacement on interfaces)is introduced to large-scale civil engineering structure to enhance computation efficiency. The basic...Free-interface dual-compatibility modal synthesis method(compatibility of both force and displacement on interfaces)is introduced to large-scale civil engineering structure to enhance computation efficiency. The basic equations of the method are first set up, and then the mode cut-off principle and the dividing principle are proposed. MATLAB is used for simulation in different frame structures. The simulation results demonstrate the applicability of this substructure method to civil engineering structures and the correctness of the proposed mode cut-off principle. Studies are also conducted on how to divide the whole structure for better computation efficiency while maintaining better precision. It is observed that the geometry and material properties should be considered, and the synthesis results would be more precise when the inflection points of the mode shapes are taken into consideration. Furthermore, the simulation performed on a large-scale high-rise connected structure further proves the feasibility and efficiency of this modal synthesis method compared with the traditional global method. It is also concluded from the simulation results that the fewer number of DOFs in each substructure will result in better computation efficiency, but too many substructures will be time-consuming due to the tedious synthesis procedures. Moreover, the substructures with free interface will introduce errors and reduce the precision dramatically, which should be avoided.展开更多
Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The ...Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The mechanism with two out-of-plane rotational and one lifting degrees of freedom(DoFs)plays an important role in posture adjustment.Based on elastic beam theory,the stiffness matrix and mass matrix of the beam element are established where the moment of inertia is considered.To improve solving efficiency,a dynamic model with low orders of the mechanism is established based on a modified modal synthesis method.Firstly,each branch of the RPR type mechanism is divided into a substructure.Subsequently,a set of hypothetical modes of each substructure is obtained based on the C-B method.Finally,dynamic equation of the whole mechanism is established by the substructure assembly.A dynamic experiment is conducted to verify the dynamic characteristics of the compliant mechanism.展开更多
In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a...In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a selection of interface degrees of freedom and significant global mode shapes, for an approximated description of vehicle dynamic behaviour. The methodology is implemented in a customised open-source software to reduce the computational efforts. The modelled tracked vehicle includes the sprung mass, the unsprung masses, connected by means of torsional bars, and all the track assemblies, composing the track chain. The proposed research activity presents a comprehensive investigation of the influence of the track chain, combined with longitudinal vehicle speed, on statics and vehicle dynamics, focusing on vertical dynamics. The vehicle response has been investigated both in frequency and time domain. In this last case road-wheel displacements are assumed as inputs for the model, under different working conditions, hence considering several road profiles with different amplitudes and characteristic excitation frequencies. Simulation results have proven a high fidelity in model order reduction approach and a significant contribution of the track chain in the global dynamic behaviour of the tracked vehicle.展开更多
In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically revi...In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically reviewed.In this context,general-ized odd-even mode theory is advanced to quantitatively and approximately describe the mutual coupling effect between a feed line and an antenna.As is mathematically deduced and demonstrated,the modal parity mismatch between the feed line and the antenna should ultimately dominate the unbalance phenomenon in antenna systems.Thus,an elegant,closed-form formula is derived to ap-proximately calculate the“unbalance degree”of a straight dipole off-center fed by a symmetric twin-wire line.Design approaches for the simplest,linear,1-D multimode resonant antennas are introduced.Moreover,the“falling tone excitation”law gauged based on prototype dipoles is revealed and used to develop a mode synthesis design approach for microstrip patch antennas(MPAs)and 2-D sectorial electric dipole antennas.Design examples with distinctive radiation performance are presented and discussed.Finally,possible development trends of multimode resonant antennas are prospected.展开更多
文摘When using H_∞ techniques to design decentralized controllers for large systems, the whole system is divided into subsystems, which are analysed using H_∞ control theory before being recombined. An analogy was established with substructural analysis in structural mechanics, in which H_∞ decentralized control theory corresponds to substructural modal synthesis theory so that the optimal H_∞ norm of the whole system corresponds to the fundamental vibration frequency of the whole structure. Hence, modal synthesis methodology and the extended Wittrick_Williams algorithm were transplanted from structural mechanics to compute the optimal H_∞ norm of the control system. The orthogonality and the expansion theorem of eigenfunctions of the subsystems H_∞ control are presented in part (Ⅰ) of the paper. The modal synthesis method for computation of the optimal H_∞ norm of decentralized control systems and numerical examples are presented in part (Ⅱ).
基金Supported by the National Natural Science Foundation of China(No.51108089)Doctoral Programs Foundation of Ministry of Education of China(No.20113514120005)the Foundation of the Education Department of Fujian Province(No.JA14057)
文摘Free-interface dual-compatibility modal synthesis method(compatibility of both force and displacement on interfaces)is introduced to large-scale civil engineering structure to enhance computation efficiency. The basic equations of the method are first set up, and then the mode cut-off principle and the dividing principle are proposed. MATLAB is used for simulation in different frame structures. The simulation results demonstrate the applicability of this substructure method to civil engineering structures and the correctness of the proposed mode cut-off principle. Studies are also conducted on how to divide the whole structure for better computation efficiency while maintaining better precision. It is observed that the geometry and material properties should be considered, and the synthesis results would be more precise when the inflection points of the mode shapes are taken into consideration. Furthermore, the simulation performed on a large-scale high-rise connected structure further proves the feasibility and efficiency of this modal synthesis method compared with the traditional global method. It is also concluded from the simulation results that the fewer number of DOFs in each substructure will result in better computation efficiency, but too many substructures will be time-consuming due to the tedious synthesis procedures. Moreover, the substructures with free interface will introduce errors and reduce the precision dramatically, which should be avoided.
基金Supported by National Natural Science Foundation of China (Grant No.51975007)。
文摘Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The mechanism with two out-of-plane rotational and one lifting degrees of freedom(DoFs)plays an important role in posture adjustment.Based on elastic beam theory,the stiffness matrix and mass matrix of the beam element are established where the moment of inertia is considered.To improve solving efficiency,a dynamic model with low orders of the mechanism is established based on a modified modal synthesis method.Firstly,each branch of the RPR type mechanism is divided into a substructure.Subsequently,a set of hypothetical modes of each substructure is obtained based on the C-B method.Finally,dynamic equation of the whole mechanism is established by the substructure assembly.A dynamic experiment is conducted to verify the dynamic characteristics of the compliant mechanism.
文摘In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a selection of interface degrees of freedom and significant global mode shapes, for an approximated description of vehicle dynamic behaviour. The methodology is implemented in a customised open-source software to reduce the computational efforts. The modelled tracked vehicle includes the sprung mass, the unsprung masses, connected by means of torsional bars, and all the track assemblies, composing the track chain. The proposed research activity presents a comprehensive investigation of the influence of the track chain, combined with longitudinal vehicle speed, on statics and vehicle dynamics, focusing on vertical dynamics. The vehicle response has been investigated both in frequency and time domain. In this last case road-wheel displacements are assumed as inputs for the model, under different working conditions, hence considering several road profiles with different amplitudes and characteristic excitation frequencies. Simulation results have proven a high fidelity in model order reduction approach and a significant contribution of the track chain in the global dynamic behaviour of the tracked vehicle.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFE0205900)the Key Technologies R&D Program of Jiangsu(Prospective and Key Technologies for Industry)(Grant Nos.BE2022067 and BE2022067-2)。
文摘In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically reviewed.In this context,general-ized odd-even mode theory is advanced to quantitatively and approximately describe the mutual coupling effect between a feed line and an antenna.As is mathematically deduced and demonstrated,the modal parity mismatch between the feed line and the antenna should ultimately dominate the unbalance phenomenon in antenna systems.Thus,an elegant,closed-form formula is derived to ap-proximately calculate the“unbalance degree”of a straight dipole off-center fed by a symmetric twin-wire line.Design approaches for the simplest,linear,1-D multimode resonant antennas are introduced.Moreover,the“falling tone excitation”law gauged based on prototype dipoles is revealed and used to develop a mode synthesis design approach for microstrip patch antennas(MPAs)and 2-D sectorial electric dipole antennas.Design examples with distinctive radiation performance are presented and discussed.Finally,possible development trends of multimode resonant antennas are prospected.
