Transition state to mode locking in a passively mode-locked erbium-doped fibre ring laser

The transition state between the continuous wave region and the mode-locked region in a passively mode-locked erbium-doped fibre ring laser has been experimentally observed by utilizing the nonlinear polarization rotation technique. When the pump power reaches the mode-locked threshold, the metastable pulse train with a tunable repetition rate is obtained in the transition from the continuous wave state to the passive mode-locked state via proper adjustment of the polarization controller. A simpie model has been established to explain the experimental observation.

Passive harmonic mode locked Yb-doped fibre all-normal-dispersion lasers

Passive harmonic mode-locking of dissipative solitons is demonstrated in all-normal dispersion Yb-doped fibre lasers. A difference equation model of the mode-locked fibre lasers is adopted to simulate the intra-cavity nonlinear dynamics. Hysteresis phenomena around the mode-locking threshold, and the effect of introducing linear phase bias are discussed. The passive harmonic mode-locking as one kind of multipulsing operations is revealed. Moreover, the simulation shows the bistability between multipulsing and single-pulse or period multiplication.

On the generation of high-quality Nyquist pulses in mode-locked fiber lasers

Nyquist pulses have wide applications in many areas,from electronics to optics.Mode-locked lasers are ideal platforms to generate such pulses.However,how to generate high-quality Nyquist pulses in mode-locked lasers remains elusive.We address this problem by managing different physical effects in mode-locked fiber lasers through extensive numerical simulations.We find that net dispersion,linear loss,gain and filter shaping can affect the quality of Nyquist pulses significantly.We also demonstrate that Nyquist pulses experience similariton shaping due to the nonlinear attractor effect in the gain medium.Our work may contribute to the design of Nyquist pulse sources and enrich the understanding of pulse shaping dynamics in mode-locked lasers.

Dissipative soliton resonance within different dispersion regimes in a single mode-locked laser

Dissipative soliton resonance(DSR) was previously studied in separated mode-locked fiber lasers within different dispersion regimes including anomalous, near-zero and normal dispersion. Here we propose a method to study DSR in a single mode-locked laser in these different dispersion regimes. This is achieved by virtue of a waveshaper which can control the laser dispersion readily using software, avoiding the usual tedious cutback method. We find that dispersion has a negligible effect on DSR since the pulse duration keeps constant while dispersion is varied. Moreover, we examine the dynamics of DSR on the parameters of the SA including modulation depth and saturation power, and find that the pulse duration can be changed in a large range when the saturation power is decreased. Our numerical simulations could be important to guide relative experimental studies.

Subharmonic mode locking of a Q-switched Nd:YAG laser

A Q-switched Nd:YAG laser has been actively mode-locked at a subharmonic frequency for the first time,to the authors’knowledge.The laser operation mode is provided by a combination of a traveling wave acousto-optic modulator and a spherical cavity mirror.The dynamics of laser generation is investigated.Pulses with a duration of 70 ps and a peak power of about 10 MW were obtained.Also presented are new results on obtaining high-power[~60 kW]picosecond tunable radiation in the~620 nm region based on frequency conversion of a superluminescent parametric generator pumped by such a laser.

Pulse-train nonuniformity in an all-fiber ring laser passively mode-locked by nonlinear polarization rotation

This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polarization controllers. The experimental results show that the pulse-train nonuniformity is caused by the interaction between the nonuniform polarization states of the soliton pulses and the passive polarizer in the cavity.

Passively mode-locked erbium-doped fiber laser via a D-shape-fiber-based MoS_2 saturable absorber with a very low nonsaturable loss

We report on the generation of conventional and dissipative solitons in erbium-doped fiber lasers by the evanescent field interaction between the propagating light and a multilayer molybdenum disulfide（MoS_2） thin film. The MoS_2 film is fabricated by depositing the MoS_2 water–ethanol mixture on a D-shape-fiber（DF） repetitively. The measured nonsaturable loss, saturable optical intensity, and the modulation depth of this device are 13.3%, 110 MW/cm^2, and 3.4% respectively.Owing to the very low nonsaturable loss, the laser threshold of conventional soliton is as low as 4.8 mW. The further increase of net cavity dispersion to normal regime, stable dissipation soliton pulse trains with a spectral bandwidth of 11.7 nm and pulse duration of 116 ps are successfully generated. Our experiment demonstrates that the MoS_2-DF device can indeed be used as a high performance saturable absorber for further applications in ultrafast photonics.

Operation of Kerr-lens mode-locked Ti:sapphire laser in the non-soliton regime

A Kerr-lens mode-locked Ti：sapphire laser operating in a non-soliton regime is demonstrated. Dispersive wave generation is observed as a result of third order dispersion in the vicinity of zero dispersion. The characteristics of the Ti：sapphire l^ser operating in a positive dispersion regime are presented, where the oscillator directly generates pulses with duration continuously tunable from 0.37 ps to 2.11 ps, and 36 fs pulses are achieved atter extracavity compression. The oscillation is numerically simulated with an extended nonlinear Schr6dinger equation, and the simulation results are in good agreement with the experimental results.

Soliton fiber laser mode locked with two types of film-based Bi2Te3 saturable absorbers

We propose a low-threshold soliton fiber laser passively mode locked with two different types of film-like saturable absorbers, one of which is fabricated by mixing Bi2Te3 with de-ionized water, as well as polyvinyl alcohol（PVA）, and then evaporating them in a Petri dish, and the other of which is prepared by directly dropping Bi2Te3 solution on the PVA film. Both Bi2Te3–PVA films exhibit outstanding features of low loss, high flexibility, and easy synthesis. By incorporating Bi2Te3–PVA films into fiber lasers, stable single-soliton emissions are obtained at a low pump power of 13 mW. Our results suggest that the Bi2Te3 can work as a promising mode locker for ultrafast lasers,while PVA is an excellent host for fabricating high-performance film-based saturable absorbers.

Second harmonic generation of laser beams in transverse mode locking states

Nonlinear frequency conversion of structured beams has been of great interest recently.We present an intracavity second harmonic generation(SHG)of laser beams in transverse mode locking(TML)states with a specially designed sandwich such as a microchip laser.The intracavity nonlinear frequency conversion process of a laser beam in a TML state to its second harmonic is theoretically and experimentally investigated,considering different relative phase and weight parameters between the basic modes in the TML beam.Comparison between the far-field SHG beam patterns of fundamental frequency transverse modes in coherently locked and incoherently superposed states demonstrates that the SHG of TML beams can carry more information.Various rarely observed far-field SHG beam patterns are obtained,and they are consistent with the theoretical analysis and numerical simulations.With the obtained SHG beams,the characteristics of the structured fundamental frequency beams can also be conversely investigated or predicted.This work may have important applications in optical 3D printing,optical trapping of particles,and free-space optical communication areas.

An all-polarization-maintaining repetition-tunable erbium-doped passively mode-locked fiber laser

An environmentally stable, repetition rate tunable, all-polarization-maintaining, Er-doped pulse fiber laser with a single-wall carbon nanotubes saturated absorber is demonstrated. The ring laser cavity includes a delay line enabling a tunable repetition rate to vary from 35.52 MHz to 35.64 MHz with continuous mode-locked operation. The laser output parameters confirm that the tunable mode-locked operations are stable. High environmental stability is also confirmed by the -130 dBc/Hz low phase noise, a 70-dB signal-to-noise ratio of radio frequency signals, a low amplitude fluctuation of 5.76 × 10-4, and a low fluctuation of reoetition rate of 12 Hz. The laser shows a high de^ree of oolarization of 93%.

Passively mode-locked Nd：GdVO4 laser at 912nm

This paper demonstrates the passively mode-locked Nd：GdVO4 laser operating on the ^4F3/2-^4I9/2 transition at 912 nm by using a semiconductor saturable-absorber mirror for passive mode locking, stable continuous wave modelocked 912nm laser was achieved with a repetition rate of 176 MHz. At the incident pump power of 17.7W, 22.6mW average output power of stable mode-locked laser was obtained with a slope efficiency of 0.3%.

Bound soliton pulses in a passively mode-locked fibre ring laser

The bound solitons in a passively mode-locked fibre ring laser are observed and their formation mechanism is summarized in this paper. In order to obtain stable bound solitons, a strong CW laser field at the centre of the soliton spectral is necessary to suppress and synchronize the random soliton phase variations.

Sb_2Te_3 mode-locked ultrafast fiber laser at 1.93μm

Ultrafast pulse generation was demonstrated in thulium doped fiber laser mode locked by magnetron sputtering de- posited Sb2Te3 with the modulation depth, non-saturable loss, and saturable intensity of 38%, 31.2%, and 3.3 MW/cm2, respectively. Stable soliton pulses emitting at 1930.07 nm were obtained with pulse duration of 1.24 ps, a 3-dB spectral bandwidth of 3.87 nm, an average output power of 130 mW, and signal-to-noise ratio （SNR） of 84 dB. To our knowledge, this is the first demonstration of Sb2Te3-based SA in fiber lasers at 2-p.m regime. Ultrafast pulse generation was demonstrated in thulium doped fiber laser mode locked by magnetron sputtering de- posited Sb2Te3 with the modulation depth, non-saturable loss, and saturable intensity of 38%, 31.2%, and 3.3 MW/cm2, respectively. Stable soliton pulses emitting at 1930.07 nm were obtained with pulse duration of 1.24 ps, a 3-dB spectral bandwidth of 3.87 nm, an average output power of 130 mW, and signal-to-noise ratio （SNR） of 84 dB. To our knowledge, this is the first demonstration of Sb2Te3-based SA in fiber lasers at 2-p.m regime.

Observation of 550 MHz passively harmonic mode-locked pulses at L-band in an Er-doped fiber laser using carbon nanotubes film

We demonstrate a passively harmonic mode-locked（PHML） fiber laser operating at the L-band using carbon nanotubes polyvinyl alcohol（CNTs-PVA） film. Under suitable pump power and an appropriate setting of the polarization controller（PC）, the 54^（th） harmonic pulses at the L-band are generated with the side mode suppression ratio（SMSR） better than 44 dB and a repetition frequency of 503.37 MHz. Further increasing the pump power leads to a higher frequency of 550 MHz with compromised stability of 38.5 dB SMSR. To the best of our knowledge, this is the first demonstration on the generation of L-band PHML pulses from an Er-doped fiber laser based on CNTs.

Review of low timing jitter mode-locked fiber lasers and applications in dual-comb absolute distance measurement

Passively mode-locked fiber lasers emit femtosecond pulse trains with excellent short-term stability. The quantum-limited timing jitter of a free running femtosecond erbium-doped fiber laser working at room temperature is considerably below one femtosecond at high Fourier frequency. The ultrashort pulse train with ultralow timing jitter enables absolute time-of-flight measurements based on a dual-comb implementation, which is typically composed of a pair of optical frequency combs generated by femtosecond lasers. Dead-zone-free absolute distance measurement with sub-micrometer precision and kHz update rate has been routinely achieved with a dual-comb configuration, which is promising for a number of precision manufacturing applications, from large step-structure measurements prevalent in microelectronic profilometry to three coordinate measurements in large-scale aerospace manufacturing and shipbuilding. In this paper, we first review the sub-femtosecond precision timing jitter characterization methods and approaches for ultralow timing jitter mode-locked fiber laser design. Then, we provide an overview of the state-of-the-art dual-comb absolute ranging technology in terms of working principles, experimental implementations, and measurement precisions. Finally, we discuss the impact of quantum-limited timing jitter on the dual-comb ranging precision at a high update rate. The route to highprecision dual-comb range finder design based on ultralow jitter femtosecond fiber lasers is proposed.

Numerical analysis of mode locking in multi-core photonic crystal fiber

With linearly coupled nonlinear Schrodinger equations,numerical analysis has been performed on the mode locking forming procedure of a fiber laser in the linear cavity configuration.The fiber is Yb-doped multi-core photonic crystal fiber and semiconductor saturable absorber mirror(SESAM) is adopted as the nonlinear transmission element to start mode locking.Because of the noise randomness,initial pulse would be picked out by SESAM in one or more cores which makes the multi-core mode locking quite different from single-core one.The two situations are compared and fully discussed.Mode locking in multi-core photonic crystal fiber laser can be realized only if the couple coefficient between the cores and the temporal overlap between the pulses in different cores are large enough.

Passively mode-locked 2-μm Tm:YAP laser with a double-wall carbon nanotube absorber

We report on a diode-pumped passively continuous wave （cw） mode-locked Tm：YAP laser with a double-wall carbon nanotube （DWCNT） absorber operating at a wavelength of 2023 nm for the first time, to the best our knowledge. The DWCNT absorber is fabricated on a hydrophilic quartz substrate by using the vertical evaporation technique. The output power is as high as 375 mW. A stable pulse train with a repetition rate of 72.26 MHz is generated with a highest single pulse energy of 5.2 μJ.

Generation and evolution of multiple operation states in passively mode-locked thulium-doped fiber laser by using a graphene-covered-microfiber

Using graphene-covered-microfiber （GCM） as a saturable absorber, the generation and evolution of multiple operation states are proposed and demonstrated in passively mode-locked thulium-doped fiber laser. The microfiber was fabricated using the flame brushing method to an interaction length of - 1.2 cm with a waist diameter of -10 μm. Graphene layers were grown on copper foils by chemical vapor deposition and transferred onto the polydimethylsiloxane （PDMS） to form a PDMS/graphene film, which allowed light-graphene interaction via evanescent field. With the increase of the pump power from 1.25 W to 2.15 W, five different lasing regimes, including continuous-wave, conventional soliton mode-locking, multi- soliton mode-locking, a period of transition, and noise-like mode-locking, were achieved in a fiber ring cavity. To the best of our knowledge, it is the first report of the generation and evolution of multiple operation states by covering graphene on the microfiber in the 2-μ.m region. The results demonstrate that GCM can be a promising method for fabricating all fiber SA, and the switchable operation states can provide more portability in complex application domain.

980-nm all-fiber mode-locked Yb-doped phosphate fiber oscillator based on semiconductor saturable absorber mirror and its amplifier

A 980-nm semiconductor saturable absorber mirror（SESAM） mode-locked Yb-doped phosphate fiber laser is demonstrated by using an all-fiber linear cavity configuration. Two different kinds of cavity lengths are introduced into the oscillator to obtain a robust and stable mode-locked seed source. When the cavity length is chosen to be 6 m, the oscillator generates an average output power of 3.5 m W and a pulse width of 76.27 ps with a repetition rate of 17.08 MHz. As the cavity length is optimized to short, 4.4-m W maximum output power and 61.15-ps pulse width are produced at a repetition rate of 20.96 MHz. The output spectrum is centered at 980 nm with a narrow spectral bandwidth of 0.13 nm. In the experiment, no undesired amplified spontaneous emission（ASE） nor harmful oscillation around 1030 nm is observed. Moreover,through a two-stage all-fiber-integrated amplifier, an output power of 740 m W is generated with a pulse width of 200 ps.