Energy transfer in solid-state dye lasers based on methyl methacrylate co-doped with sulforhodamine B and crystal violet

Laser action in methyl methacrylate （MMA） co-doped with sulforhodamine B and crystal violet dyes was investi- gated. The dye mixture was incorporated into a solid polymeric matrix and was pumped by a 532-nm Nd：YAG laser. Distributed feedback dye laser （DFDL） action was induced in the dye mixture using a prism arrangement both in the donor and acceptor regions by an energy transfer mechanism. Theoretically, the characteristics of acceptor and donor DFDLs, and the dependence of their pulse widths and output powers on acceptor-donor concentrations and pump power, were studied. Experimentally, the output energy of DFDL was measured at the emission peaks of donor and acceptor dyes for different pump powers and different acceptor-donor concentrations. Tuning of the output wavelength was achieved by varying the period of the gain modulation of the laser medium. The laser wavelength showed continuous tunability from 563 nm to 648 nm.

Superplastic solid state welding of steel and copper alloy based on laser quenching of steel surface

Based on the feasibility of isothermal superplastic solid state welding of steel and copper alloy, the welded surface of steel surface was ultra-fined through laser quenching, and then the welding process tests between different base metals of 40Cr and QCr0.5 were made under the condition of non vacuum and non shield gas. The experimental results show that, with the sample surface of steel after laser quenching and that of copper alloy carefully cleaned, and under the pre-pressed stress of 56.684.9 MPa, at the welding temperature of 750800 ℃ and at initial strain rate of （2.57.5）×10-4 s-1, the solid state welding can be finished in 120180 s so that the strength of the joint is up to that of QCr0.5 base metal and the expansion rate of the joint does not exceed 6%. The plastic deformation of the joint was further analysed. The superplastic deformation of the copper alloy occurs in welding process and the deformation of steel are little.

High power diode-pumped passively mode-locked Nd:YVO_4 laser at repetition rate of 3.2 GHz

A compact high power diode-pumped passively mode-locked Nd:YVO_4 laser with high repetition rate is realized.Using an Nd:YVO_4 crystal and a semiconductor saturable absorber mirror(SESAM) in the oscillator, the picosecond pulse output with an average power of 1.38 W, a repetition rate of 3.24 GHz, and a pulse duration of 11.4 ps is achieved. After one stage of amplification, the final output power reaches 11.34 W, corresponding to a total optical-to-optical efficiency of about 32%. The root mean square(RMS) value of power fluctuation is demonstrated to be less than 0.6% in 24 hours,showing a superior stability with the compact configuration.

New Progress on All Solid State Laser Technology in China

1 Significance of All Solid State Laser (DPL) Technology in Field of LaserBecause of the advantages of high conversion efficiency, good beam quality, small size and light weight, DPL becomes the hotspot and priority of development of laser technology. It may be the main body of laser in the future and replace gas laser and liquid laser. It is a great revolution of laser technology.The developed countries vie in developing DPL. China has achieved great success in this field, but there is a wide gap between the developed countries and us. We should attach great importance to it.

Tunable second harmonic generation from a Kerr-lens mode-locked Yb:YCa4O(BO3)3 femtosecond laser

We experimentally demonstrated a diode-pumped Kerr-lens mode-locked femtosecond（fs） laser with a self-frequency doubling Yb：YCa_4O（BO_3）_3 crystal.Sub-40 fs laser pulses were directly generated from the oscillator without extracavity compression.The central wavelength was tunable from 1039 nm to 1049 nm with a typical bandwidth of 35 nm and an average output power of 53 mW.For the first time,a self-frequency doubled second harmonic green laser with tunable range from 519 nm to 525 nm was observed.

Passively mode-locked Nd：GdVO4 laser at 912nm

This paper demonstrates the passively mode-locked Nd：GdVO4 laser operating on the ^4F3/2-^4I9/2 transition at 912 nm by using a semiconductor saturable-absorber mirror for passive mode locking, stable continuous wave modelocked 912nm laser was achieved with a repetition rate of 176 MHz. At the incident pump power of 17.7W, 22.6mW average output power of stable mode-locked laser was obtained with a slope efficiency of 0.3%.

An all-solid-state high power quasi-continuous-wave tunable dual-wavelength Ti：sapphire laser system using birefringence filter

This paper describes a tunable dual-wavelength Ti：sapphire laser system with quasi-continuous-wave and high-power outputs. In the design of the laser, it adopts a frequency-doubled Nd：YAG laser as the pumping source, and the birefringence filter as the tuning element. Tunable dual-wavelength outputs with one wavelength range from 700 nm to 756.5 nm, another from 830 nm to 900mn have been demonstrated. With a pump power of 23 W at 532 nm, a repetition rate of 7 kHz and a pulse width of 47.6 ns, an output power of 5.1 W at 744.8 nm and 860.9 nm with a pulse width of 13.2 ns and a line width of 3 nm has been obtained, it indicates an optical-to-optical conversion efficiency of 22.2%.

Infrared Laser Pumped Green and Blue Laser Emissions from a Single Solid State Material Doped by Rare Earth Ions

The possible ways and progress of infrared or red laser pumped green and blue laser emissions from a single solid state material doped by rare earth ions are outlined. The green and blue lasers realized from infrared laser pumped rare earth doped nonlinear laser crystals by means of self frequency conversion and from infrared laser pumped rare earth doped bulk, fiber and microsphere materials by means of frequency upconversion are introduced in detail. Other kinds of devices and methods are also compared. The typical nonlinear laser crystals such as YAl 3(BO 3) 4, GdAl 3(BO 3) 4, YCa 4O(BO 3) 3 , GdCa 4O(BO 3) 3, and the typical upconversion fluoride fibers are compared and analyzed. The major problems remaining to be solved and the developing trends in the area are also discussed.

Thermal Analysis of Blue Laser Diode for Solid State Lighting Application

Solid-state light sources based on laser diode are becoming great alternative for LEDs. Improvement of the thermal characteristics of InGaN LD is very important for realizing reliable devices. In this investigation the influence of the temperature of diode on light parameters was studied. White light was obtained by coupling blue light of diode with yellow phosphors: YAG:Ce3+ and GYAG:Ce3+ with nitride. For three values of the temperature of LD’s stem, regulated by Peltier module, CCT, CRI and chromaticity coordinates were measured by spectroradiometer. The importance of emission characteristics of materials was shown. Subsequently, the influence of temperature on laser diode intensity was investigated for 120 hours. This experiment was repeated for different levels of current and temperature. Finally, the steady state of thermal finite element analysis was performed to reveal the distribution of the temperature. The analysis showed the importance of heat sink and also temperature control.

Analytical modelling of end thermal coupling in a solid-state laser longitudinally bonded by a vertical-cavity top-emitting laser diode

The intrinsic features involving a circularly symmetric beam profile with low divergence, planar geometry as well as the increasingly enhanced power of vertical-cavity surface-emitting lasers （VCSELs） have made the VCSEL a promising pump source in direct end bonding to a solid-state laser medium to form the minimized, on-wafer integrated laser system. This scheme will generate a surface contact pump configuration and thus additional end thermal coupling to the laser medium through the joint interface of both materials, apart from pump beam heating. This paper analytically models temperature distributions in both VCSEL and the laser medium from the end thermal coupling regarding surface contact pump configuration using a top-emitting VCSEL as the pump source for the first time. The analytical solutions are derived by introducing relative temperature and mean temperature expressions. The results show that the end contact heating by the VCSEL could lead to considerable temperature variations associated with thermal phase shift and thermal lensing in the laser medium. However, if the central temperature of the interface is increased by less than 20 K, the end contact heating does not have a significant thermal influence on the laser medium. In this case, the thermal effect should be dominated by pump beam heating. This work provides useful analytical results for further analysis of hybrid thermal effects on those lasers pumped by a direct VCSEL bond.

Research on All-solid-state Laser and Its Industrial Development in China

Some typical applications of solid-state laser are described, and its industrial development in China are also introduced in detail.

Development and Research on All-solid-state Intracavity Sum-frequency laser

Generation of intracavity multi-wavelength and the basic principle of sum-frequency lasers are discused, and the current research status and development of laser diode pumped lasers are introduced in detail.

Synchronization of Chaotic Intensities and Phases in an Array of N Lasers

A linear array of N mutually coupled single-mode lasers is investigated. It is shown that the intensities of N lasers are chaotically synchronized when the coupling between lasers is relatively strong. The chaotic synchronization of intensities depends on the location of the lasers in the array. The chaotic synchronization appears between two outmost lasers, the second two outmost lasers, etc. There is no synchronization between nearest neighbors of the lasers. If the number of N is odd, the middle laser is never synchronized between any lasers. The chaotic synchronization of phases between nearest lasers in the array is examined by using the analytic signal and the Gaussian filter methods based on the peak of the power spectrum of the intensity. It can be seen that the message of chaotic intensity synchronization is conveyed through the phase synchronization.

Modeling the pulse shape of Q-switched lasers to account for terminal-level relaxation

To account for the effect of lower-level relaxation, we have derived a characteristic equation for describing the laser pulse from the modified rate equations for Q-switched lasers. The pulse temporal profile is related to the ratio of the lower-level lifetime to the cavity lifetime and the number of times the population inversion density is above the threshold. By solving the coupled rate equations numerically, the effect of terminal-level lifetime on pulse temporal behaviour is analysed. The mode is applied to the case of a diode-pumped Nd：YAG laser that is passively Q-switched by a Cr4＋ ：YAG absorber. Theoretical results show good agreement with the experiments.

Enhanced laser characteristics of pyrromethene 650 using modified PMMA as solid hosts

Solid-state samples based on modified polymethyl methacrylate （MPMMA） with methanol doped with the dye pyrromethene 650 （PM650） axe prepared. The effects of a volume percentage of methanol on the laser characteristics of the sample, including spectra properties, slope efficiency, photostability and tunable properties, are investigated. The broadband dye laser output wavelength is around 655 nm and a highest slope efficiency of 32.23% is achieved. Pumping the samples at a repetition rate of 5 Hz with a pulse energy of as high as 100 mJ （the fluence is 0.26 J/cm2）, the longest lifetime （168000 shots） is obtained in the sample （MMA：methanol=18：2）, and the corresponding normalized photostability reaches 109.19 GJ/mol. When the sample （MMA：methanol=18：2） is placed in a Shoshan-type oscilla- tor, the naxrow-linewidth operation is a continuous tuning range （up to 64 nm）. The results indicate that the laser characteristics of solid-state dyes can be greatly enhanced by using modified PMMA with methanol serving as the solid host.

High harmonic generation in crystal SiO_(2) by sub-10-fs laser pulses

The high harmonic generation(HHG)by few-cycle laser pulses is essential for research in strong-field solid-state physics.Through comparison of high harmonic spectra of solids generated by laser pulses with varying durations,we discovered that lasers with good dispersion compensation are capable of producing a broad spectrum of high harmonics.As the pulse duration is further compressed,several interference peaks appear in the broad spectrum.Moreover,we conducted simulations using the semiconductor Bloch equation,considering the effect of Berry curvature,to better understand this process.Our work provides a valuable approach for studying HHG by few-cycle laser pulses in solid materials,expanding the application of HHG in attosecond physics.

热效应作用下高功率薄片涡旋激光器的模场结构

激光介质热效应引起的谐振腔模场结构变化成为高功率涡旋激光器的一个关键问题.本文建立了环形光泵浦薄片激光晶体的温度场及热形变计算模型,将热效应像差作为谐振腔衍射积分方程的微扰,研究热效应对激光器模场结构的影响规律.具体研究了Nd:YAG,Nd:YLF和Nd:YVO_(4)薄片涡旋激光器的模场结构随泵浦功率、晶体吸收系数、晶体厚度的变化规律.研究结果表明,热效应使涡旋激光器模谱产生径向展宽,模式纯净度下降.泵浦功率越大,高阶径向模式占比越大,模场结构越复杂.泵浦功率升高时,Nd:YVO_(4)激光器的模谱展宽最大,Nd:YAG激光器的模谱展宽最小.晶体吸收系数越大,模谱展宽越严重;激光晶体厚度减小时,模谱展宽呈增宽趋势.

利用非线性损耗提升全固态单频激光器输出功率研究进展(特邀)

全固态单频连续波激光器因其噪声低、线宽窄、光束质量好、功率稳定性高等优点已经被广泛应用于产生非经典光场、冷原子物理研究、引力波探测等诸多领域。随着科学技术的不断发展,传统的全固态激光器的输出功率已经不能满足前沿领域的需求,因此亟需在保持全固态激光器整体性能的同时进一步提升激光器的输出功率。为此首先需要更高的泵浦功率,而这将使激光器内部增益提高,在腔内损耗不变的情况下,原非振荡模式也将满足起振条件,从而使激光器在跳模或多模状态下运转。此外,激光晶体的热效应和损伤阈值也限制了输出功率的提高。本文介绍了一种利用非线性损耗大幅度提升全固态单频连续波激光器的输出功率的技术和方法。通过在谐振腔中引入非线性损耗,使主模经受的非线性损耗是次模的一半。在模式竞争的作用下,谐振腔内的模式被更进一步的选择,从而允许全固态单频激光器在更高的增益下保持单纵模运转。通过在谐振腔内插入多块增益晶体可以有效缓解由于激光增益晶体热效应的限制,从而实现更高功率的单频激光输出。目前高功率全固态连续波激光器的输出功率已经达到了一百瓦的量级,且还在进一步提高。通过在谐振腔内引入非线性损耗,全固态单频连续波激光器的整体性能在得以保障和提高的同时,其应用范围也得到了进一步的推广。

固体激光器涡旋光束产生实验系统设计与实现

高质量的涡旋光束在量子信息、激光雷达、激光通信等领域有着广泛的应用前景。为了用固体激光器直接产生涡旋光束,该文基于谐振腔模式与激光介质作用的速率方程,阐述了在二极管端面泵浦固体激光器中通过环形光泵浦产生拉盖尔-高斯涡旋光的原理。设计了环形光泵浦固体激光器产生涡旋光的实验方案并搭建了实验系统。实验产生了角向阶次为1阶、2阶的涡旋光束,相位涡旋手性可通过微调谐振腔输出镜调节。该实验能够使学生利用固体激光器直接产生涡旋光束并观察涡旋光束的相位特性,有助于学生加深对激光谐振腔模式理论及涡旋光束相位特性的理解,为相关专业学生的课程教学提供有力支撑。

1116 nm单频脉冲Nd∶YAG激光器

针对共振荧光测风雷达的探测需求,设计和研制了种子注入的Nd∶YAG电光调Q单频1116 nm脉冲激光器,采用带偏置电压反馈的扫描-触发谐振探测技术,建立了1116 nm单纵模振荡,并对中心频率稳定性进行分析。最终实现输出1116 nm激光单脉冲能量6.48 mJ,重复频率60 Hz,输出线宽为33.2 MHZ,脉冲宽度为75.7 ns。通过波长计测量输出光波长,波长稳定在1116.2979 nm附近。利用外差拍频,测定120 min中心频率稳定性(均方根)为818.3 kHz。该激光器输出光通过三倍频可变换至372 nm,作为铁共振荧光多普勒测风激光雷达的发射光源,频率抖动量对应的风速测量误差小于1 m/s。