Construction of Psychological Adjustment Function Model of Music Education Based on Emotional Tendency Analysis

In the face offierce competition in the social environment,mental health problems gradually get the attention of the public,in order to achieve accurate mental health data analysis,the construction of music education is based on emotional tendency analysis of psychological adjustment function model.Design emotional tendency analysis of music education psychological adjustment function architecture,music teaching goal as psychological adjust-ment function architecture building orientation,music teaching content as a foundation for psychological adjust-ment function architecture and music teaching process as a psychological adjustment function architecture building,music teaching evaluation as the key of building key regulating function architecture,Establish a core literacy oriented evaluation system.Different evaluation methods were used to obtain the evaluation results.Four levels of psychological adjustment function model of music education are designed,and the psychological adjust-ment function of music education is put forward,thus completing the construction of psychological adjustment function model of music education.The experimental results show that the absolute value of the data acquisition error of the designed model is minimum,which is not more than 0.2.It is less affected by a bad coefficient and has good performance.It can quickly converge to the best state in the actual prediction process and has a strong con-vergence ability.

Electrostatic Attraction and Repulsion Explained and Modelled Mathematically Using Classical Physics—A Detailed Mechanism Based on Particle Wave Functions

The phenomenon of electrical attraction and repulsion between charged particles is well known, and described mathematically by Coulomb’s Law, yet until now there has been no explanation for why this occurs. There has been no mechanistic explanation that reveals what causes the charged particles to accelerate, either towards or away from each other. This paper gives a detailed explanation of the phenomena of electrical attraction and repulsion based on my previous work that determined the exact wave-function solutions for both the Electron and the Positron. It is revealed that the effects are caused by wave interactions between the wave functions that result in Electromagnetic reflections of parts of the particle’s wave functions, causing a change in their momenta.

Dynamic Analysis of a Predator-Prey Model with Holling-II Functional Response

A predator-prey model with linear capture term Holling-II functional response was studied by using differential equation theory. The existence and the stabilities of non-negative equilibrium points of the model were discussed. The results show that under certain limited conditions, these two groups can maintain a balanced position, which provides a theoretical reference for relevant departments to make decisions on ecological protection.

A Cautionary Note on the Application of GIS in Spatial Optimization Modeling

Spatial optimization as part of spatial modeling has been facilitated significantly by integration with GIS techniques. However, for certain research topics, applying standard GIS techniques may create problems which require attention. This paper serves as a cautionary note to demonstrate two problems associated with applying GIS in spatial optimization, using a capacitated p-median facility location optimization problem as an example. The first problem involves errors in interpolating spatial variations of travel costs from using kriging, a common set of techniques for raster files. The second problem is inaccuracy in routing performed on a graph directly created from polyline shapefiles, a common vector file type. While revealing these problems, the paper also suggests remedies. Specifically, interpolation errors can be eliminated by using agent-based spatial modeling while the inaccuracy in routing can be improved through altering the graph topology by splitting the long edges of the shapefile. These issues suggest the need for caution in applying GIS in spatial optimization study.

Smaller & Smarter: Score-Driven Network Chaining of Smaller Language Models

With the continuous evolution and expanding applications of Large Language Models (LLMs), there has been a noticeable surge in the size of the emerging models. It is not solely the growth in model size, primarily measured by the number of parameters, but also the subsequent escalation in computational demands, hardware and software prerequisites for training, all culminating in a substantial financial investment as well. In this paper, we present novel techniques like supervision, parallelization, and scoring functions to get better results out of chains of smaller language models, rather than relying solely on scaling up model size. Firstly, we propose an approach to quantify the performance of a Smaller Language Models (SLM) by introducing a corresponding supervisor model that incrementally corrects the encountered errors. Secondly, we propose an approach to utilize two smaller language models (in a network) performing the same task and retrieving the best relevant output from the two, ensuring peak performance for a specific task. Experimental evaluations establish the quantitative accuracy improvements on financial reasoning and arithmetic calculation tasks from utilizing techniques like supervisor models (in a network of model scenario), threshold scoring and parallel processing over a baseline study.

Stability of a Delayed Stochastic Epidemic COVID-19 Model with Vaccination and with Differential Susceptibility

In this paper, we treat the spread of COVID-19 using a delayed stochastic SVIRS (Susceptible, Infected, Recovered, Susceptible) epidemic model with a general incidence rate and differential susceptibility. We start with a deterministic model, then add random perturbations on the contact rate using white noise to obtain a stochastic model. We first show that the delayed stochastic differential equation that describes the model has a unique global positive solution for any positive initial value. Under the condition R0 ≤ 1, we prove the almost sure asymptotic stability of the disease-free equilibrium of the model.

Hybrid graded element model for transient heat conduction in functionally graded materials

This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a fundamental solution in Laplace space for FGMs is constructed. Next, a hybrid graded element is formulated based on the obtained fundamental solution and a frame field. As a result, the graded properties of FGMs are naturally reflected by using the fundamental solution to interpolate the intra-element field. Further, Stefest＇s algorithm is employed to convert the results in Laplace space back into the time-space domain. Finally, the performance of the proposed method is assessed by several benchmark examples. The results demonstrate well the efficiency and accuracy of the proposed method.

TDS-1 GNSS reflectometry wind geophysical model function response to GPS block types

This paper presents the TDS-1 GNSS reflectometry wind Geophysical Model Function(GMF)response to GPS block types.The observables were extracted from Delay Doppler Maps(DDMs)after taking the receiver antenna gains effects and GNSS-R geometry effects into account.Since the DDM is affected by GPS EffectiveIsotropic Radiated Power(EIRP),we first investigate the sensitivity of observables to the GPS block.Additionally,the observables at high SNRs are more sensitive to wind speed,but the spatial coverage at high signal to noise ratios(SNRs)is lower,while DDMs at low SNRs have the opposite characteristics.To balance the accuracy and spatial coverage,the DDM datasets are divided into two parts:high SNR(>0 dB)and low SNR(>−10 dB and≤0 dB)to develop wind GMF.Then,the influences of GPS block on wind speed retrieval both at high and low SNR is analyzed.Results show that the block types have impacts on wind GMF and the use of a prior GPS block can contribute to a better wind speed retrieval both at high and low SNR.Compared with ASCAT,the Root Mean Square Error(RMSE)value of wind speed retrieval at high and low SNR are 2.19 m/s and 3.13 m/s,respectively,when all TDS data are processed without distinguishing GPS block types.However,if the TDS data are separately processed and used to develop wind GMF through different blocks,both the accuracy and correlation coefficient can be improved to some extent.Finally,the influence of significant height of the swell(Hs)on SNR observables is analyzed,and it is demonstrated that there is no obvious linear or nonlinear relationship between them.

Asymptotic Analysis of a Stochastic Model of Mosquito-Borne Disease with the Use of Insecticides and Bet Nets

Ross’ epidemic model describing the transmission of malaria uses two classes of infection, one for humans and one for mosquitoes. This paper presents a stochastic extension of a deterministic vector-borne epidemic model based only on the class of human infectious. The consistency of the model is established by proving that the stochastic delay differential equation describing the model has a unique positive global solution. The extinction of the disease is studied through the analysis of the stability of the disease-free equilibrium state and the persistence of the model. Finally, we introduce some numerical simulations to illustrate the obtained results.

Functions of Allusions from Leppihalme’s model

The general function of allusions is often thought to add clarity and significance to ideas and descriptions.However,it would be difficult to establish an exhaustive list of mutually exclusive category

Molecular properties and potential energy function model of BH under external electric field

Using the density functional B3P86/cc-PV5Z method, the geometric structure of BH molecule under different external electric fields is optimized, and the bond lengths, dipole moments, vibration frequencies, and other physical properties parameters are obtained. On the basis of setting appropriate parameters, scanning single point energies are obtained by the same method and the potential energy curves under different external fields are also obtained. These results show that the physical property parameters and potential energy curves may change with external electric field, especially in the case of reverse direction electric field. The potential energy function without external electric field is fitted by Morse potential, and the fitting parameters are obtained which are in good agreement with experimental values. In order to obtain the critical dissociation electric parameter, the dipole approximation is adopted to construct a potential model fitting the corresponding potential energy curve of the external electric field. It is found that the fitted critical dissociation electric parameter is consistent with numerical calculation, so that the constructed model is reliable and accurate. These results will provide important theoretical and experimental reference for further studying the molecular spectrum, dynamics, and molecular cooling with Stark effect.

Development of Mathematical Model on Preparation of Functionally Graded Material by Co-sedimentation

From the process of sedimentation the mathematical relationships among deposition volume and powder properties as well as sedimentation parameters were deduced. Based on the formula a mathematical model was set up and simulated through the computer. At last the validity of mathematical model was supported by the representative experiment on Ti-Mo system FGM prepared by co-sedimentation.

Time function of surface subsidence based on Harris model in mined-out area

The surface subsidence is a common environmental hazard in mined-out area. Based on careful analysis of the regularity of surface subsidence in mined-out area, we proposed a new time function based on Harris curve model in consideration of the shortage of current surface subsidence time functions. By analyzing the characteristics of the new time function, we found that it could meet the dynamic process, the velocity change process and the acceleration change process during surface subsidence. Then its rationality had been verified through project cases. The results show that the proposed time function model can give a good reflection of the regularity of surface subsidence in mined-out area and can accurately predict surface subsidence. And the prediction data of the model are a little greater than measured data on condition of proper measured data quantity, which is safety in the engineering. This model provides a new method for the analysis of surface subsidence in mined-out area and reference for future prediction, and it is valuable to engineering application.

Rough function model and rough membership function

Two pairs of approximation operators, which are the scale lower and upper approximations as well as the real line lower and upper approximations, are defined. Their properties and antithesis characteristics are analyzed. The rough function model is generalized based on rough set theory, and the scheme of rough function theory is made more distinct and complete. Therefore, the transformation of the real function analysis from real line to scale is achieved. A series of basic concepts in rough function model including rough numbers, rough intervals, and rough membership functions are defined in the new scheme of the rough function model. Operating properties of rough intervals similar to rough sets are obtained. The relationship of rough inclusion and rough equality of rough intervals is defined by two kinds of tools, known as the lower （upper） approximation operator in real numbers domain and rough membership functions. Their relative properties are analyzed and proved strictly, which provides necessary theoretical foundation and technical support for the further discussion of properties and practical application of the rough function model.

Transfer function modeling and analysis of the open-loop Buck converter using the fractional calculus

Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode（CCM） operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.

Three-Component Model for Bidirectional Reflection Distribution Function of Thermal Coating Surfaces

We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the microfacet theory and Snell＇s law, the multiple reflection is considered Nth cosine distributed, and the volume scattering is uniformly distributed in reflection angles according to the experimental results. This model describes the reflection characteristics of thermal coating surfaces more completely and reasonably. Simulation and measurement results of two thermal coating samples SR107 and S781 are given to validate that this three-component model significantly improves the modeling accuracy for thermal coating surfaces compared with the existing BRDF models.

Evaluation of unconstrained and constrained mathematical functions to model girth growth of rubber trees (Hevea brasiliensis) using young agemeasurements

No attempt has been made to date to model growth in girth of rubber tree （Hevea brasiliansis）. We evaluated the few widely used growth functions to identify the most parsimonious and biologically reasonable model for describing the girth growth of young rubber trees based on an incomplete set of young age measurements. Monthly data for girth of immature trees （age 2 to 12 yearsi from two locations were sub- jected to modelling. Re-parameterized, unconstrained and constrained growth functions,of Richards （RM）, Gompertz （GM） and the monomo- lecular ＇model ^（MM） were fitted to data. Duration of growth was the firsf constraint introduced. In the stagel We attempted a population aver- age （PA） model to capture the trend in growth. The best PA model was fitted as a subject specific （SS） model. We used appropriate error vari- ance-covariance structure to account for correlation due to repeated measurements over time. Unconstrainecl functions underestimated the asymptotic maximum that did not reflective carrying capacity of the locations. Underestimafions were attributed to the partial set＇ of meas- urements made during the early growth phase of the trees. MM proved superior to RM and GM. In the randomcoefficient models, both Gf and Go appeared to be influenced by tree level effects. Inclusion of diagonal definite positive matrix removed the correlation between random effects. The results were similar at both locations. In the overall assessment MM appeared as the candidate model for studying the girth-age relationships in Hevea trees. Based on the fitted model we conclude that, in Hevea trees, growth rate is maintained at maximum value at to, then decreases until the final state at dG/dt 〉 0, resulting in yield curve with no period of accelerating growth. One physiological explanation is that photosynthetic activity in Hevea trees decreases as girth increases and constructive metabolism is larger than destructive metabolism.

Predictive functional control based on fuzzy T-S model for HVAC systems temperature control

In heating, ventilating and air-conditioning （HVAC） systems, there exist severe nonlinearity, time-varying nature, disturbances and uncertainties. A new predictive functional control based on Takagi-Sugeno （T-S） fuzzy model was proposed to control HVAC systems. The T-S fuzzy model of stabilized controlled process was obtained using the least squares method, then on the basis of global linear predictive model from T-S fuzzy model, the process was controlled by the predictive functional controller. Especially the feedback regulation part was developed to compensate uncertainties of fuzzy predictive model. Finally simulation test results in HVAC systems control applications showed that the proposed fuzzy model predictive functional control improves tracking effect and robustness. Compared with the conventional PID controller, this control strategy has the advantages of less overshoot and shorter setting time, etc.

Improved shape hardening function for bounding surface model for cohesive soils

A shape hardening function is developed that improves the predictive capabilities of the generalized bounding surface model for cohesive soils, especially when applied to overconsolidated specimens. This improvement is realized without any changes to the simple elliptical shape of the bounding surface, and actually reduces the number of parameters associated with the model by one.