The monomer agglomeration of nonmetallic inclusions was simulated with a diffusion limited aggregation (DLA) model of the fractal theory. The simulation study with a random two-dimensional diffusion was carried out....The monomer agglomeration of nonmetallic inclusions was simulated with a diffusion limited aggregation (DLA) model of the fractal theory. The simulation study with a random two-dimensional diffusion was carried out. The results indicate that the DLA model can be used for the simulation of agglomeration behavior of the cluster-type inclusions. The morphology of clusters was observed with SEM and compared with the simulated agglomerates. The modelling procedure of the DLA model is applicable for the agglomeration process. The uncertainty of agglomeration process and the persuasive average agglomerative ratio was analyzed. The factors about the agglomerative ratio with the collision path distance and the size of particles or seed were discussed. The adherence of the nonmetallic inclusions on the dam, the weir and the walls of a tundish, and the absorption of inclusions by stopper or nozzle were also discussed.展开更多
-Starting from physical oceanology characteristics of the China seas and for the short-term operational prediction of SST in the region, a two-dimensional (vertically integrated) primitive equation model, physically r...-Starting from physical oceanology characteristics of the China seas and for the short-term operational prediction of SST in the region, a two-dimensional (vertically integrated) primitive equation model, physically reasonable and operationally feasible,on the upper mixed layer is constructed and given here, which consists of three parts, the nondivergent residual current (the monthly mean field of the Kuroshio and its branches) equations, the dynamic forecasting equations, and the equation of model's physics consisting of surface heat flux, coolings of the upper mixed layer due to the Ekman pumping and the entrainment by gale. This model may be used primarily to forecast the sea surface temperature, and to give estimations of the mean wind-driven current and the sea level, for a period of 3-5 d. In part 1 of this series, the physical conditions for establishing model equations are discussed first, that is, 1. the existence of the upper well mixed layer in the region; 2. the distinguishability of currents of all kinds; 3. the splitting of thermodynamical equation. The equations of nondivergent residual current, and the dynamic forecasting equations with initial values and boundary conditions are also discussed.展开更多
A class of recharge–discharge oscillator model for the El Ni?o/Southern Oscillation (ENSO) is considered. A stable limit cycle is obtained by transforming the ENSO model into the van der Pol-Duffing equation. We p...A class of recharge–discharge oscillator model for the El Ni?o/Southern Oscillation (ENSO) is considered. A stable limit cycle is obtained by transforming the ENSO model into the van der Pol-Duffing equation. We proved that there exists periodic oscillations in the ENSO recharge–discharge oscillator model.展开更多
A macroscopic model of the magnetoresistance effect in fimited anisotropic semiconductors is built. This model allows us to solve the problem of measurement of physical magnetoresistance components of crystals and fil...A macroscopic model of the magnetoresistance effect in fimited anisotropic semiconductors is built. This model allows us to solve the problem of measurement of physical magnetoresistance components of crystals and films. Based on a unified mathematical model the method is worked out enabling us to measure tensor components of the specific electrical resistance and the relative magnetoresistance of anisotropic semiconductors simultaneously.展开更多
The paper deals with analytical fracture mechanics to consider elastic thermal stresses acting in an isotropic multi-particle-matrix system. The multi-particle-matrix system consists of periodically distributed spheri...The paper deals with analytical fracture mechanics to consider elastic thermal stresses acting in an isotropic multi-particle-matrix system. The multi-particle-matrix system consists of periodically distributed spherical particles in an infinite matrix. The thermal stresses originate during a cooling process as a consequence of the difference αm - αp in thermal expansion coefficients between the matrix and the particle, αm and αp, respectively. The multi-particle-matrix system thus represents a model system applicable to a real two-component material of a precipitation-matrix type. The infinite matrix is imaginarily divided into identical cubic cells. Each of the cubic cells with the dimension d contains a central spherical particle with the radius R, where d thus corresponds to inter-particle distance. The parameters R, d along with the particle volume fraction v = v(R, d) as a function of R, d represent microstructural characteristics of a twocomponent material. The thermal stresses are investigated within the cubic cell, and accordingly are functions of the microstructural characteristics. The analytical fracture mechanics includes an analytical analysis of the crack initiation and consequently the crack propagation both considered for the spherical particle (q = p) and the cell matrix (q = m). The analytical analysis is based on the determination of the curve integral Wcq of the thermal-stress induced elastic energy density Wq. The crack initiation is represented by the determination of the critical particle radius Rqc = Rqc(V). Formulae for Rqc are valid for any two-component mate- rial of a precipitate-matrix type. The crack propagation for R 〉 Rqc is represented by the determination of the function fq describing a shape of the crack in a plane perpendicular展开更多
We report on a forest-like-to-desert-like pattern evolution in the growth of an organic thin film observed by using an atomic force microscope. We use a modified diffusion limited aggregation model to simulate the gro...We report on a forest-like-to-desert-like pattern evolution in the growth of an organic thin film observed by using an atomic force microscope. We use a modified diffusion limited aggregation model to simulate the growth process and are able to reproduce the experimental patterns. The energy of electric dipole interaction is calculated and determined to be the driving force for the pattern formation and evolution. Based on these results, single crystalline films are obtained by enhancing the electric dipole interaction while limiting effects of other growth parameters.展开更多
The manufacturing of composite structures is a highly complex task with inevitable risks, particularly associated with aleatoric and epistemic uncertainty of both the materials and processes, as well as the need for &...The manufacturing of composite structures is a highly complex task with inevitable risks, particularly associated with aleatoric and epistemic uncertainty of both the materials and processes, as well as the need for <i>in-situ</i> decision-making to mitigate defects during manufacturing. In the context of aerospace composites production in particular, there is a heightened impetus to address and reduce this risk. Current qualification and substantiation frameworks within the aerospace industry define tractable methods for risk reduction. In parallel, Industry 4.0 is an emerging set of technologies and tools that can enable better decision-making towards risk reduction, supported by data-driven models. It offers new paradigms for manufacturers, by virtue of enabling <i>in-situ</i> decisions for optimizing the process as a dynamic system. However, the static nature of current (pre-Industry 4.0) best-practice frameworks may be viewed as at odds with this emerging novel approach. In addition, many of the predictive tools leveraged in an Industry 4.0 system are black-box in nature, which presents other concerns of tractability, interpretability and ultimately risk. This article presents a perspective on the current state-of-the-art in the aerospace composites industry focusing on risk reduction in the autoclave processing, as an example system, while reviewing current trends and needs towards a Composites 4.0 future.展开更多
The field emission (FE) characteristics of nano-structured carbon films (NSCFs) are investigated. The saturation behaviour of the field emission current density found at high electric field E cannot be reasonably ...The field emission (FE) characteristics of nano-structured carbon films (NSCFs) are investigated. The saturation behaviour of the field emission current density found at high electric field E cannot be reasonably explained by the traditional Fowler-Nordheim (F-N) theory. A three-region E model and the curve-fitting method are utilized for discussing the FE characteristics of NSCFs. In the low, high, and middle E regions, the FE mechanism is reasonably explained by a modified F-N model, a corrected space-charge-limited-current (SCLC) model and the joint model of F N and SCLC mechanism, respectively. Moreover, the measured FE data accord well with the results from our corrected theoretical model.展开更多
This paper considers a single-item, periodic-review inventory model with linear ordercosts, a convex function representing expected one-period costs, nonegative i.i.d. demandsand a fixed cost for order. Stockouts are ...This paper considers a single-item, periodic-review inventory model with linear ordercosts, a convex function representing expected one-period costs, nonegative i.i.d. demandsand a fixed cost for order. Stockouts are backordered. All data are stationary Both finiteand infinite horizon problems are treated.展开更多
The impacts of the enhanced model's moist physics and horizontal resolution upon the QPFs (quantitative precipitation forecasts)are investigated by applying the HIRLAM(high resolution limited area model)to the sum...The impacts of the enhanced model's moist physics and horizontal resolution upon the QPFs (quantitative precipitation forecasts)are investigated by applying the HIRLAM(high resolution limited area model)to the summer heavy-rain cases in China.The performance of the control run, for which a 0.5°×0.5°grid spacing and a traditional“grid-box supersaturation removal+Kuo type convective paramerization”are used as the moist physics,is compared with that of the sensitivity runs with an enhanced model's moist physics(Sundqvist scheme)and an increased horizontal resolution(0.25°×0.25°),respectively.The results show: (1)The enhanced moist physics scheme(Sundqvist scheme),by introducing the cloud water content as an additional prognostic variable and taking into account briefly of the microphysics involved in the cloud-rain conversion,does bring improvements in the model's QPFs.Although the deteriorated QPFs also occur occasionally,the improvements are found in the majority of the cases,indicating the great potential for the improvement of QPFs by enhancing the model's moist physics. (2)By increasing the model's horizontal resolution from 0.5°×0.5°,which is already quite high compared with that of the conventional atmospheric soundings,to 0.25°×0.25°without the simultaneous enhancement in model physics and objective analysis,the improvements in QPFs are very limited.With higher resolution,although slight amelioration in locating the rainfall centers and in resolving some finer structures of precipitation pattern are made,the number of the mis- predicted fine structures in rainfall field increases with the enhanced model resolution as well.展开更多
A limited area model has been applied to study the impact of satellite-derived relative humidity data on the predic- tion of onset vortex of monsoon 1979.The results show that inclusion of satellite-derived relative h...A limited area model has been applied to study the impact of satellite-derived relative humidity data on the predic- tion of onset vortex of monsoon 1979.The results show that inclusion of satellite-derived relative humidity data im- proved the prediction of track of the cyclonic circulation and the rainfall rates in the region of the vortex.展开更多
The limited area 5-level primitive equation model,as the first operational precipitation forecast model in China,has been run at Beijing (National) Meteorological Center (BMC) for more than four years.The opera- tiona...The limited area 5-level primitive equation model,as the first operational precipitation forecast model in China,has been run at Beijing (National) Meteorological Center (BMC) for more than four years.The opera- tional results show that this model gives continuous services,and the forecast skill is satisfied for the forecast of some weather situations,such as extratropical cyclone,front and the precipitation associated with them. The forecast guides are widely used at the local weather services now.展开更多
This paper has investigated the rise of bent-over buoyant plume in neutral condition. By means of the combined-effect model proposed at earlier time, authors have deduced a formula of final rise limited by mechanical ...This paper has investigated the rise of bent-over buoyant plume in neutral condition. By means of the combined-effect model proposed at earlier time, authors have deduced a formula of final rise limited by mechanical turbulence and therefore have concluded that the corresponding formula neglecting the accumu- lated effect of ambient turbulence is only its particular case. By analyzing the function relation of the various affecting factors with the plume rise in the existing equations, it is proved that the formula derived from the combined-effect model is the most reasonable and shows more conformity to the observations.展开更多
In the article 'Evolution Model of the Earth’s Limited Expanding' published in Volume 45 Number (4) of Chinese Science Bulletin[1], the author suggests that the earth expands according to a law R(t) = R0+A(1 ...In the article 'Evolution Model of the Earth’s Limited Expanding' published in Volume 45 Number (4) of Chinese Science Bulletin[1], the author suggests that the earth expands according to a law R(t) = R0+A(1 -exp(β(t-ts))) (remark: this formula was mistakenly printed as R(t) = R0 + Aexp(β(t-ts)) in the and formula (12) of the text of ref. [1]). According to ref. [1], the earth was formed 4.6 billion years ago. After 0.3 billion years from its birth (ts), it started expansion from an initial radius R0 of 4651 km, and may reach a final maximum radius of R0+A = 6511 km. In the 4.6 billion years history, the radius of the earch has increased by 1720 km, or the density decreased from 14200 km/m3 (2.57 times the present density) to 5520 kg/m3 within the latest 4.3 billion years.展开更多
The limited area analysis and forecast system(LAFS)was developed and has been put into operational use at National Meteorological Center since January 1991.This system can be regarded as a branch system attached to th...The limited area analysis and forecast system(LAFS)was developed and has been put into operational use at National Meteorological Center since January 1991.This system can be regarded as a branch system attached to the global assimilation and medium-range forecast system which is based on a spectral model T42L9.The main advancements as an upgrade operational system are as follows:the use of a regional fine mesh optimum interpolation(OI)analysis scheme:the realiza- tion of the nonlinear normal mode initialization for the regional model:the development of a 15L- spherical grid primitive equation model(with real topography and enstrophy conservation)and its nesting forecast with the spectral model T42L9.展开更多
Over the past few decades, urban freeway congestion has been highly recognized as a serious and worsening traffic problem in the world. To relieve freeway congestion, several active traffic and demand management (ATD...Over the past few decades, urban freeway congestion has been highly recognized as a serious and worsening traffic problem in the world. To relieve freeway congestion, several active traffic and demand management (ATDM) methods have been developed. Among them, variable speed limit (VSL) aims at regulating freeway mainline flow upstream to meet existing capacity and to harmonize vehicle speed. However, congestion may still be inevitable even with VSL implemented due to extremely high demand in actual practice. This study modified an existing VSL strategy by adding a new local constraint to suggest an achievable speed limit during the control period. As a queue is a product of the congestion phenomenon in freeway, the incentives of a queue build-up in the applied coordinated VSL control situation were analyzed. Considering a congestion occurrence (a queue build-up) characterized by a sudden and sharp speed drop, speed contours were utilized to demonstrate the congestion distribution over a whole freeway network in various sce- narios. Finally, congestion distributions found in both VSL control and non-VS control situations for various scenarios were investigated to explore the impact of the applied coordinated VSL control on the congestion distribution. An authentic stretch of V^hitemud Drive (I~~ID), an urban freeway corridor in Edmonton, Alberta, Canada, was employed to implement this modified coordinated VSL control strategy; and a calibrated micro-simu- lation VISSIM model (model functions) was applied as the substitute of the real-world traffic system to test the above mentioned performance. The exploration task in this study can lay the groundwork for future research on how to improve the presented VSL control strategy for achieving the congestion mitigation effect on freeway.展开更多
文摘The monomer agglomeration of nonmetallic inclusions was simulated with a diffusion limited aggregation (DLA) model of the fractal theory. The simulation study with a random two-dimensional diffusion was carried out. The results indicate that the DLA model can be used for the simulation of agglomeration behavior of the cluster-type inclusions. The morphology of clusters was observed with SEM and compared with the simulated agglomerates. The modelling procedure of the DLA model is applicable for the agglomeration process. The uncertainty of agglomeration process and the persuasive average agglomerative ratio was analyzed. The factors about the agglomerative ratio with the collision path distance and the size of particles or seed were discussed. The adherence of the nonmetallic inclusions on the dam, the weir and the walls of a tundish, and the absorption of inclusions by stopper or nozzle were also discussed.
文摘-Starting from physical oceanology characteristics of the China seas and for the short-term operational prediction of SST in the region, a two-dimensional (vertically integrated) primitive equation model, physically reasonable and operationally feasible,on the upper mixed layer is constructed and given here, which consists of three parts, the nondivergent residual current (the monthly mean field of the Kuroshio and its branches) equations, the dynamic forecasting equations, and the equation of model's physics consisting of surface heat flux, coolings of the upper mixed layer due to the Ekman pumping and the entrainment by gale. This model may be used primarily to forecast the sea surface temperature, and to give estimations of the mean wind-driven current and the sea level, for a period of 3-5 d. In part 1 of this series, the physical conditions for establishing model equations are discussed first, that is, 1. the existence of the upper well mixed layer in the region; 2. the distinguishability of currents of all kinds; 3. the splitting of thermodynamical equation. The equations of nondivergent residual current, and the dynamic forecasting equations with initial values and boundary conditions are also discussed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.40975028 and 41175052)
文摘A class of recharge–discharge oscillator model for the El Ni?o/Southern Oscillation (ENSO) is considered. A stable limit cycle is obtained by transforming the ENSO model into the van der Pol-Duffing equation. We proved that there exists periodic oscillations in the ENSO recharge–discharge oscillator model.
文摘A macroscopic model of the magnetoresistance effect in fimited anisotropic semiconductors is built. This model allows us to solve the problem of measurement of physical magnetoresistance components of crystals and films. Based on a unified mathematical model the method is worked out enabling us to measure tensor components of the specific electrical resistance and the relative magnetoresistance of anisotropic semiconductors simultaneously.
基金supported by the Slovak Research and Development Agency under the contracts No. COST-0022-06, No.COST-0042-06, No. APVV-51-061505, No. APVV-0034-07, No.APVV-0171-06by the 6th FP EU NESPA+17 种基金by FP7-EGPOT-2007-3 DEMATEN 204953 (05/08-04/11)by IMPROVING 229625by HANCOC-MNT.ERA-NET 01/09-12/11by NANOSMART Centre of Excellence (01/2007-12/2010) Slovak Academy of Sciencesby the Slovak Grant Agency VEGA (2/7197/27, 2/7194/27, 2/7195/27,1/4107/07)by iNTeg-Risk CP-IP 213345-2by European Structural Fund-Center of Excellence (Progressive Materials with Nano-and Submicron-Structure): ITMS NFP code 262200120019by COST Action 536by COST Action 538by OTKA Foundation (No. T043704,T043685, T 048593, T 63609)by HPRT-CT-2000-00037by EC5 Center of Excellence ICAI-CT-2000-70029by OTKA Postdoctoral Research Grant (D38478)by Swedish Research Council (No. 621-2002-4299)by NSF-OTKA-MTA (No. MTA: 96 OTKA: 049953)by GVOP-3.2.1.-2004-04-0224/3.0by Janos Bolyai Research Grant.96/OTKA04953, OTKA 63609.
文摘The paper deals with analytical fracture mechanics to consider elastic thermal stresses acting in an isotropic multi-particle-matrix system. The multi-particle-matrix system consists of periodically distributed spherical particles in an infinite matrix. The thermal stresses originate during a cooling process as a consequence of the difference αm - αp in thermal expansion coefficients between the matrix and the particle, αm and αp, respectively. The multi-particle-matrix system thus represents a model system applicable to a real two-component material of a precipitation-matrix type. The infinite matrix is imaginarily divided into identical cubic cells. Each of the cubic cells with the dimension d contains a central spherical particle with the radius R, where d thus corresponds to inter-particle distance. The parameters R, d along with the particle volume fraction v = v(R, d) as a function of R, d represent microstructural characteristics of a twocomponent material. The thermal stresses are investigated within the cubic cell, and accordingly are functions of the microstructural characteristics. The analytical fracture mechanics includes an analytical analysis of the crack initiation and consequently the crack propagation both considered for the spherical particle (q = p) and the cell matrix (q = m). The analytical analysis is based on the determination of the curve integral Wcq of the thermal-stress induced elastic energy density Wq. The crack initiation is represented by the determination of the critical particle radius Rqc = Rqc(V). Formulae for Rqc are valid for any two-component mate- rial of a precipitate-matrix type. The crack propagation for R 〉 Rqc is represented by the determination of the function fq describing a shape of the crack in a plane perpendicular
基金Project supported by the National Natural Science Foundation of China (Grant No.10774176)the National Basic Research Program of China (Grant No.2006CB806202)
文摘We report on a forest-like-to-desert-like pattern evolution in the growth of an organic thin film observed by using an atomic force microscope. We use a modified diffusion limited aggregation model to simulate the growth process and are able to reproduce the experimental patterns. The energy of electric dipole interaction is calculated and determined to be the driving force for the pattern formation and evolution. Based on these results, single crystalline films are obtained by enhancing the electric dipole interaction while limiting effects of other growth parameters.
文摘The manufacturing of composite structures is a highly complex task with inevitable risks, particularly associated with aleatoric and epistemic uncertainty of both the materials and processes, as well as the need for <i>in-situ</i> decision-making to mitigate defects during manufacturing. In the context of aerospace composites production in particular, there is a heightened impetus to address and reduce this risk. Current qualification and substantiation frameworks within the aerospace industry define tractable methods for risk reduction. In parallel, Industry 4.0 is an emerging set of technologies and tools that can enable better decision-making towards risk reduction, supported by data-driven models. It offers new paradigms for manufacturers, by virtue of enabling <i>in-situ</i> decisions for optimizing the process as a dynamic system. However, the static nature of current (pre-Industry 4.0) best-practice frameworks may be viewed as at odds with this emerging novel approach. In addition, many of the predictive tools leveraged in an Industry 4.0 system are black-box in nature, which presents other concerns of tractability, interpretability and ultimately risk. This article presents a perspective on the current state-of-the-art in the aerospace composites industry focusing on risk reduction in the autoclave processing, as an example system, while reviewing current trends and needs towards a Composites 4.0 future.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11164031)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education of China (Grant No. (2009)1341)
文摘The field emission (FE) characteristics of nano-structured carbon films (NSCFs) are investigated. The saturation behaviour of the field emission current density found at high electric field E cannot be reasonably explained by the traditional Fowler-Nordheim (F-N) theory. A three-region E model and the curve-fitting method are utilized for discussing the FE characteristics of NSCFs. In the low, high, and middle E regions, the FE mechanism is reasonably explained by a modified F-N model, a corrected space-charge-limited-current (SCLC) model and the joint model of F N and SCLC mechanism, respectively. Moreover, the measured FE data accord well with the results from our corrected theoretical model.
文摘This paper considers a single-item, periodic-review inventory model with linear ordercosts, a convex function representing expected one-period costs, nonegative i.i.d. demandsand a fixed cost for order. Stockouts are backordered. All data are stationary Both finiteand infinite horizon problems are treated.
基金Financially supported by the Chinese State Education Committee's Research Foundation for scholars returning from abroad and by Danish Government's Danida Foundation.
文摘The impacts of the enhanced model's moist physics and horizontal resolution upon the QPFs (quantitative precipitation forecasts)are investigated by applying the HIRLAM(high resolution limited area model)to the summer heavy-rain cases in China.The performance of the control run, for which a 0.5°×0.5°grid spacing and a traditional“grid-box supersaturation removal+Kuo type convective paramerization”are used as the moist physics,is compared with that of the sensitivity runs with an enhanced model's moist physics(Sundqvist scheme)and an increased horizontal resolution(0.25°×0.25°),respectively.The results show: (1)The enhanced moist physics scheme(Sundqvist scheme),by introducing the cloud water content as an additional prognostic variable and taking into account briefly of the microphysics involved in the cloud-rain conversion,does bring improvements in the model's QPFs.Although the deteriorated QPFs also occur occasionally,the improvements are found in the majority of the cases,indicating the great potential for the improvement of QPFs by enhancing the model's moist physics. (2)By increasing the model's horizontal resolution from 0.5°×0.5°,which is already quite high compared with that of the conventional atmospheric soundings,to 0.25°×0.25°without the simultaneous enhancement in model physics and objective analysis,the improvements in QPFs are very limited.With higher resolution,although slight amelioration in locating the rainfall centers and in resolving some finer structures of precipitation pattern are made,the number of the mis- predicted fine structures in rainfall field increases with the enhanced model resolution as well.
文摘A limited area model has been applied to study the impact of satellite-derived relative humidity data on the predic- tion of onset vortex of monsoon 1979.The results show that inclusion of satellite-derived relative humidity data im- proved the prediction of track of the cyclonic circulation and the rainfall rates in the region of the vortex.
文摘The limited area 5-level primitive equation model,as the first operational precipitation forecast model in China,has been run at Beijing (National) Meteorological Center (BMC) for more than four years.The opera- tional results show that this model gives continuous services,and the forecast skill is satisfied for the forecast of some weather situations,such as extratropical cyclone,front and the precipitation associated with them. The forecast guides are widely used at the local weather services now.
文摘This paper has investigated the rise of bent-over buoyant plume in neutral condition. By means of the combined-effect model proposed at earlier time, authors have deduced a formula of final rise limited by mechanical turbulence and therefore have concluded that the corresponding formula neglecting the accumu- lated effect of ambient turbulence is only its particular case. By analyzing the function relation of the various affecting factors with the plume rise in the existing equations, it is proved that the formula derived from the combined-effect model is the most reasonable and shows more conformity to the observations.
基金the National Natural Science Foundation of China (Grant No. 49774236),
文摘In the article 'Evolution Model of the Earth’s Limited Expanding' published in Volume 45 Number (4) of Chinese Science Bulletin[1], the author suggests that the earth expands according to a law R(t) = R0+A(1 -exp(β(t-ts))) (remark: this formula was mistakenly printed as R(t) = R0 + Aexp(β(t-ts)) in the and formula (12) of the text of ref. [1]). According to ref. [1], the earth was formed 4.6 billion years ago. After 0.3 billion years from its birth (ts), it started expansion from an initial radius R0 of 4651 km, and may reach a final maximum radius of R0+A = 6511 km. In the 4.6 billion years history, the radius of the earch has increased by 1720 km, or the density decreased from 14200 km/m3 (2.57 times the present density) to 5520 kg/m3 within the latest 4.3 billion years.
文摘The limited area analysis and forecast system(LAFS)was developed and has been put into operational use at National Meteorological Center since January 1991.This system can be regarded as a branch system attached to the global assimilation and medium-range forecast system which is based on a spectral model T42L9.The main advancements as an upgrade operational system are as follows:the use of a regional fine mesh optimum interpolation(OI)analysis scheme:the realiza- tion of the nonlinear normal mode initialization for the regional model:the development of a 15L- spherical grid primitive equation model(with real topography and enstrophy conservation)and its nesting forecast with the spectral model T42L9.
基金supported by the Natural Sciences and Engineering Research Council(NSERC) of Canada, City of Edmonton,and Transport Canadasupported by the National Natural Science Foundation of China(No.51208052,51308058)the Science and Technology Research and Development Program of Shaanxi Province,China(No.2013K13-04-02)
文摘Over the past few decades, urban freeway congestion has been highly recognized as a serious and worsening traffic problem in the world. To relieve freeway congestion, several active traffic and demand management (ATDM) methods have been developed. Among them, variable speed limit (VSL) aims at regulating freeway mainline flow upstream to meet existing capacity and to harmonize vehicle speed. However, congestion may still be inevitable even with VSL implemented due to extremely high demand in actual practice. This study modified an existing VSL strategy by adding a new local constraint to suggest an achievable speed limit during the control period. As a queue is a product of the congestion phenomenon in freeway, the incentives of a queue build-up in the applied coordinated VSL control situation were analyzed. Considering a congestion occurrence (a queue build-up) characterized by a sudden and sharp speed drop, speed contours were utilized to demonstrate the congestion distribution over a whole freeway network in various sce- narios. Finally, congestion distributions found in both VSL control and non-VS control situations for various scenarios were investigated to explore the impact of the applied coordinated VSL control on the congestion distribution. An authentic stretch of V^hitemud Drive (I~~ID), an urban freeway corridor in Edmonton, Alberta, Canada, was employed to implement this modified coordinated VSL control strategy; and a calibrated micro-simu- lation VISSIM model (model functions) was applied as the substitute of the real-world traffic system to test the above mentioned performance. The exploration task in this study can lay the groundwork for future research on how to improve the presented VSL control strategy for achieving the congestion mitigation effect on freeway.