MODEL REFERENCE ADAPTIVE CONTROL BASED ON NONLINEAR COMPENSATION FOR TURBOFAN ENGINE

The design of a turbofan rotor speed control system, using model reference adaptive control（MRAC） method with input and output measurements, is discussed for the purpose of practical application. The nonlinear compensator based on functional link neural network is used to deal with the engine nonlinearity and the hardware-in-loop simulation is also developed. The results show that the nonlinear MRAC controller has the adequate performance of compensating and adapting nonlinearity arising from the change of engine state or working environment. Such feature demonstrates potential practical applications of MRAC for aeroengine control system.

Applicahon of a Simplified Model Reference Adaptive Algorithm

The application of a simplifed model reference adaptive control(SMRAC) on a typical Pump controlled motor electrohydraulic servo system is studied here. The algorithm of first-order scalar SMRAC ac second-order vector SMRAC are derived. Computer simulations of the algorithms are presented. Experimental results prove that the method of control adopted here perform satisfactorily over a wide range of operating conditions.

MULTIVARIABLE MODEL REFERENCE ADAPTIVE CONTROL FOR A TURBOFAN ENGINE

A decentralized model reference adaptive control (MRAC) scheme is proposed and applied to design a multivariable control system of a dual-spool turbofan engine.Simulation studies show good static and dynamic performance of the system over the fullflight envelope. Simulation results also show the good effectiveness of reducing interactionin the multivariable system with significant coupling. The control system developed has awide frequency band to satisfy the strict engineering requirement and is practical for engineering applications.

Robustness Analysis of Discrete-time Indirect Model Reference Adaptive Control with Normalized Adaptive Laws

For a class of discrete-time systems with unmodeled dynamics and bounded disturbance, the design and analysis of robust indirect model reference adaptive control （MRAC） with normalized adaptive law are investigated. The main work includes three parts. Firstly, it is shown that the constructed parameter estimation algorithm not only possesses the same properties as those of traditional estimation algorithms, but also avoids the possibility of division by zero. Secondly, by establishing a relationship between the plant parameter estimate and the controller parameter estimate, some similar properties of the latter are also established. Thirdly, by using the relationship between the normalizing signal and all the signals of the closed-loop system, and some important mathematical tools on discrete-time systems, as in the continuous-time case, a systematic stability and robustness analysis approach to the discrete indirect robust MRAC scheme is developed rigorously.

Direct model reference adaptive control using K_p = LDU factorization for multivariable discrete-time plants

For a large class of discrete-time multivariable plants with arbitrary relative degrees, the design and analysis of the direct model reference adaptive control scheme are investigated under less restrictive assumptions. The algorithm is based on a new parametrization derived from the high frequency gain matrix factorization Kp=LDU under the condition that the signs of the leading principal minors of/fp are known. By reproving the discrete-time Lp and L2σ norm relationship between inputs and outputs, establishing the properties of discrete-time adaptive law, defining the normalizing signal, and relating the signal with all signals in the closed-loop system, the stability and convergence of the discrete-time multivariable model reference adaptive control scheme are analyzed rigorously in a systematic fashion as in the continuous-time case.

New model reference adaptive control with input constraints

A new scheme of adaptive control is proposed for a class of linear time-invariant（ LTI） dynamical systems,especially in aerospace,with matched parametric uncertainties and input constraints. Based on a typical and conventional direct model reference adaptive control scheme,various modifications have been employed to achieve the goal. ＂C omposite model reference adaptive control＂of higher performance is seam-lessly combined with ＂positive μ-mod＂,which consequently results in a smooth tracking trajectory despite of the input constraints. In addition,bounded-gain forgetting is utilized to facilitate faster convergence of parameter estimates. The stability of the closed-loop systemcan be guaranteed by using Lyapunov theory.The merits and effectiveness of the proposed method are illustrated by a numerical example of the longitudinal dynamical systems of a fixed-wing airplane.

Model Reference Adaptive Controller for Simultaneous Voltage and Frequency Restoration of Autonomous AC Microgrids

In an autonomous droop-based microgrid,the system voltage and frequency(VaF)are subject to deviations as load changes.Despite the existence of various control methods aimed at correcting system frequency deviations at the secondary control level without any communication network,the challenges associated with these methods and their abilities to simul-taneously restore microgrid VaF have not been fully investigated.In this paper,a multi-input multi-output(MIMO)model reference adaptive controller(MRAC)is proposed to achieve VaF restoration while accurate power sharing among distributed generators(DGs)is maintained.The proposed MRAC,without any communication network,is designed based on two methods:droop-based and inertia-based methods.For the microgrid,the suggested design procedure is started by defining a model reference in which the control objectives,such as the desired settling time,the maximum tolerable overshoot,and steady-state error,are considered.Then,a feedback-feedforward con-troller is established,of which the gains are adaptively tuned by some rules derived from the Lyapunov stability theory.Through some simulations in MATLAB/SimPowerSystem Tool-box,the proposed MRAC demonstrates satisfactory perfor-mance.

Design of a Kind of Model Reference Adaptive Missile Control System

Aim To present an adaptive missile control system adaped to the external disturbance and the mobility of target movement. Methods Model reference adaptive control (MRAC) was applied and modified in the light of the traits of the anti tank missile. Results Simulation results demonstrated this control system satisfied the requirement of anti tank missile of dive overhead attack. Conclusion It is successful to use MRAC in missile control system design, the quality is better than that designed by classical control theory.

Application of a Robust Model Reference Adaptive Control Algorithm to a Nonlinear Automotive Actuator

Model reference adaptive control is a viable control method to impose the demanded dynamics on plants whose parameters are affected by large uncertainty. In this paper, we show by means of experiments that robust adaptive methods can effectively face nonlinearities that are common to many automotive electromechanical devices. We consider here, as a representative case study, the control of a strongly nonlinear automotive actuator. The experimental results confirm the effectiveness of the method to cope with unmodeled nonlinear terms and unknown parameters. In addition, the engineering performance indexes computed on experimental data clearly show that the robust adaptive strategy provides better performance compared with those given by a classical model-based control solution with fixed gains.

Model reference adaptive impedance control for physical human-robot interaction

This paper presents a novel enhanced human-robot interaction system based on model reference adaptive control. The presented method delivers guaranteed stability and task performance and has two control loops. A robot-specific inner loop, which is a neuroadaptive controller, learns the robot dynamics online and makes the robot respond like a prescribed impedance model. This loop uses no task information, including no prescribed trajectory. A task-specific outer loop takes into account the human operator dynamics and adapts the prescribed robot impedance model so that the combined human-robot system has desirable characteristics for task performance. This design is based on model reference adaptive control, but of a nonstandard form. The net result is a controller with both adaptive impedance characteristics and assistive inputs that augment the human operator to provide improved task performance of the human-robot team. Simulations verify the performance of the proposed controller in a repetitive point-to-point motion task. Actual experimental implementations on a PR2 robot further corroborate the effectiveness of the approach.

A NOTE ON THE MODEL REFERENCE ADAPTIVE CONTROL OF LINEAR PARABOLIC SYSTEMS WITH CONSTANT COEFFICIENTS

The problem of constructing a model reference adaptive control law for an uncertain 1- dimensional parabolic system with one constant coefficient is considered in this paper. Adaptive control law are obtained by Lyapunov redesign method. The energy method for parabolic systems and the Agmon＇s inequality are applied in the analysis, which leads to a stronger result than that of Hong and Bentsman （Automatica, 1994）.

A Sliding Mode Controller Based on Robust Model Reference Adaptive Proportional-integral Control for Stand-alone Three-phase Inverter

This paper proposes a sliding mode controller based on robust model reference adaptive proportional-integral(RMRA-PI)control for a stand-alone voltage source inverter(SA-VSI).The proposed controller has two control loops where the coefficients of PI controller are regulated by the adaptive sliding law.This method is used to regulate the output voltage of the inverter under different load conditions and uncertainty,and adapts the output to the reference model to reduce the total harmonic distortion(THD).In this paper,the stability of the proposed controller is proven by using Lyapunov's theory and Barbalet’s lemma.The proposed controller performs well in voltage regulation such as low THD under sudden load change and uncertainty.Also,the results of the proposed controller are compared with PI controller to show the effectiveness of the presented control system.

State tracking model reference adaptive control for switched nonlinear systems with linear uncertain parameters

Model reference adaptive control （MRAC） is considered for a class of switched nonlinear systems in which the unknown parameters appear linearly. The linear uncertain parameters in each subsystem can be expressed as a vector and the uncertain vectors in different subsystems are estimated individually by different vector variables. Update laws are designed such that the parameter estimation will ＇freeze＇ until its corresponding subsystem is active. Controllers for subsystems are given to ensure asymptotic states tracking under arbitrary switchings. Two examples are presented to validate the proposed method.

Novel Lyapunov-based rapid and ripple-free MPPT using a robust model reference adaptive controller for solar PV system

The technological,economic,and environmental benefits of photovoltaic(PV)systems have led to their wide-spread adoption in recent years as a source of electricity generation.However,precisely identifying a PV system’s maximum power point(MPP)under normal and shaded weather conditions is crucial to conserving the maximum generated power.One of the biggest concerns with a PV system is the existence of partial shading,which produces multiple peaks in the P–V characteristic curve.In these circumstances,classical maximum power point tracking(MPPT)approaches are prone to getting stuck on local peaks and failing to follow the global maximum power point(GMPP).To overcome such obstacles,a new Lyapunov-based Robust Model Reference Adaptive Controller(LRMRAC)is designed and implemented to reach GMPP rapidly and ripple-free.The proposed controller also achieves MPP accurately under slow,abrupt and rapid changes in radiation,temperature and load profile.Simulation and OPAL-RT real-time simulators in various scenarios are performed to verify the superiority of the proposed approach over the other state-of-the-art methods,i.e.,ANFIS,INC,VSPO,and P&O.MPP and GMPP are accomplished in less than 3.8 ms and 10 ms,respectively.Based on the results presented,the LRMRAC controller appears to be a promising technique for MPPT in a PV system.

STATE DERIVATIVE-FREE VARIABLE STRUCTURE MODEL REFERENCE ADAPTIVE CONTROL OF LINEAR PARABOLIC SYSTEMS

The problem of constructing a model dimensional parabolic system is considered in this reference adaptive control law for an uncertain 1- article. The controller designed here involves only the plant state but no its derivatives. A priori bounds on the plant＇s uncertain parameters are used to propose switching laws which serve as an adaptive mechanism. The exponential decay to zero of the state error with any prescribed rate is guaranteed by choosing a controller parameter correspondingly. Numerical studies are also presented to illustrate the applicability of the control law.

System Design of a Reference Model Adaptive Control for Radial Plasma Position on HL-2A Tokamak

The design of the control system for radial plasma position on HL-2A based on model reference adaptive control (MRAC) principle is presented in this paper. The simulated results show that it can be used to improve the performance of the system greatly. Compared with the classical PID control system, it has obvious advantages in the better dynamic response, the smaller quantity of calculation and the better robustness.

DIRECT SELF-REPAIRING CONTROL FOR HELICOPTER VIA QUANTUM CONTROL AND ADAPTIVE COMPENSATOR

A direct self-repairing control approach is proposed for helicopter via quantum control techniques and adaptive compensator when some complex faults occur. For a linear varying-parameter helicopter control system, the model reference adaptive control law is designed and an adaptive compensator is used for improving its self-re- pairing capability. To enhance anti-interference capability of helicopter, quantum control feedforward is added be- tween fault and disturbance. Simulation results illustrate the effectiveness and feasibility of the approach.

DECENTRALIZED ADAPTIVE CONTROL FOR LINEAR TIME INVARIENT SYSTEMS WITH FIRST ORDER INTERCONNECTIONS

A new decentralized adaptive control scheme is presented for linear time invariant systems with first order interconnections. The proposed control scheme with “proportional plus integral” terms is used to improve the convergence rate and the ultimate bound of the tracking error. It is important to note that the adaptive scheme uses lower adaptive gains and smaller control inputs to avoid input saturation and oscillatory behavior. Simulation results are illustrated for controlling a dual inverted pendulum and a multivariable turbofan engine using the proposed adaptive scheme. These simulations validate out conclusions.

Composite Adaptive Control of Belt Polishing Force for Aero-engine Blade

The existing methods for blade polishing mainly focus on robot polishing and manual grinding.Due to the difficulty in high-precision control of the polishing force,the blade surface precision is very low in robot polishing,in particular,quality of the inlet and exhaust edges can not satisfy the processing requirements.Manual grinding has low efficiency,high labor intensity and unstable processing quality,moreover,the polished surface is vulnerable to burn,and the surface precision and integrity are difficult to ensure.In order to further improve the profile accuracy and surface quality,a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed,which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together.By the mode decision-making mechanism,Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value,and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision.Based on the mathematical model of the force-exerting mechanism,simulation analysis is implemented on DSCAC.Simulation results show that the output polishing force can better track the given signal.Finally,the blade polishing experiments are carried out on the designed polishing equipment.Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility,valve dead-time effect,valve nonlinear flow,cylinder friction,measurement noise and other interference on the control precision of polishing force,which has high control precision,strong robustness,strong anti-interference ability and other advantages compared with MRACFNN.The proposed research achieves high-precision control of the polishing force,effectively improves the blade machining precision and surface consistency,and significantly reduces the surface roughness.

Adaptive Trajectory Tracking Control for a Nonholonomic Mobile Robot

As one of the core issues of the mobile robot motion control, trajectory tracking has received extensive attention. At present, the solution of the problem only takes kinematic or dynamic model into account separately, so that the presented strategy is difficult to realize satisfactory tracking quality in practical application. Considering the unknown parameters of two models, this paper presents an adaptive controller for solving the trajectory tracking problem of a mobile robot. Firstly, an adaptive kinematic controller utilized to generate the command of velocity is designed based on Backstepping method. Then, in order to make the real velocity of mobile robot reach the desired velocity asymptotically, a dynamic adaptive controller is proposed adopting reference model and Lyapunov stability theory. Finally, through simulating typical trajectories including circular trajectory, fold line and parabola trajectory in normal and perturbed cases, the results illustrate that the control scheme can solve the tracking problem effectively. The proposed control law, which can tune the kinematic and dynamic model parameters online and overcome external disturbances, provides a novel method for improving trajectory tracking performance of the mobile robot.