Preparation of Modified UiO-66 Catalyst and Its Catalytic Performance for NH_(3)-SCR Denitration

Zirconium-based metal-organic framework UiO-66 was successfully prepared by solvothermal method,and UiO-66 was modified by adding regulators such as formic acid,acetic acid,and hydrochloric acid.The NH_(3)-SCR reactivity of the samples was evaluated by the denitration activity evaluation system,and the UiO-66 and the regulator-modified UiO-66 were characterized by XRD,SEM,BET,FTIR,TG,NH_(3)-TPD,etc.,the effects of regulator types on the structure and properties of UiO-66 were investigated.The experimental results show that,after adding the modifier,the morphology of UiO-66 changes from irregular quadrilateral with serious agglomeration to particles with regular crystal shape and good dispersibility,and the crystal morphology of the catalyst is improved.In addition,after adding the modifier,UiO-66 has a larger specific surface area and stronger surface acidity,which optimizes the catalytic performance of UiO-66.The catalytic performance test results of NH_(3)-SCR show that the low-temperature activity of UiO-66 is poor,and it only shows a certain catalytic activity at higher temperatures.The catalytic activity of UiO-66 was significantly improved after adding the regulator.Among them,the UiO-66-HCl modified with hydrochloric acid had the best catalytic activity,and the denitration rate reached 70%when the denitration temperature was 380℃.

Accelerating the Screening of Modified MA_(2)Z_(4) Catalysts for Hydrogen Evolution Reaction by Deep Learning-Based Local Geometric Analysis

Machine learning(ML)integrated with density functional theory(DFT)calculations have recently been used to accelerate the design and discovery of single-atom catalysts(SACs)by establishing deep structure–activity relationships.The traditional ML models are always difficult to identify the structural differences among the single-atom systems with different modification methods,leading to the limitation of the potential application range.Aiming to the structural properties of several typical two-dimensional MA_(2)Z_(4)-based single-atom systems(bare MA_(2)Z_(4) and metal single-atom doped/supported MA_(2)Z_(4)),an improved crystal graph convolutional neural network(CGCNN)classification model was employed,instead of the traditional machine learning regression model,to address the challenge of incompatibility in the studied systems.The CGCNN model was optimized using crystal graph representation in which the geometric configuration was divided into active layer,surface layer,and bulk layer(ASB-GCNN).Through ML and DFT calculations,five potential single-atom hydrogen evolution reaction(HER)catalysts were screened from chemical space of 600 MA_(2)Z_(4)-based materials,especially V_(1)/HfSn_(2)N_(4)(S)with high stability and activity(Δ_(GH*)is 0.06 eV).Further projected density of states(pDOS)analysis in combination with the wave function analysis of the SAC-H bond revealed that the SAC-dz^(2)orbital coincided with the H-s orbital around the energy level of−2.50 eV,and orbital analysis confirmed the formation ofσbonds.This study provides an efficient multistep screening design framework of metal single-atom catalyst for HER systems with similar two-dimensional supports but different geometric configurations.

Effect of Ni loadings on the activity and coke formation of MgO-modified Ni/Al_2O_3 nanocatalyst in dry reforming of methane

MgO-modified Ni/Al2O3 catalysts with different Ni loadings were prepared and employed in dry reforming of methane （DRM）. The effect of Ni loadings on the activity and coke formation of Ni/MgO-A1203 catalysts were investigated. The synthesized catalysts were characterized by XRD, N2 adsorption-desorption, SEM, TPO and TPR techniques. The obtained results showed that increasing nickel loading decreased the BET surface area and increased the catalytic activity and amount of deposited carbon. In addition, the effect of gas hourly space velocity （GHSV） and feed ratio were studied.

Effect of Ni Loading and Ce_(x)Zr_(1-x)O_(2) Promoter on Ni-Based SBA-15 Catalysts for Steam Reforming of Methane

A series of Ni/SBA-15 catalysts with Ni contents ranging from 5wt% to 20wt% as well as 10wt%Ni/10wt%CexZr1-xO2/SBA-15 （x=0, 0.5, 1） were prepared. The structures of the catalysts were characterized using XRD, TPR, TEM and BET techniques. The catalytic activities of the catalysts for steam reforming of methane were evaluated in a continuous flow microreactor. The results indicated that both the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts had good catalytic activities at at- mospheric pressure. The 10wt%Ni/SBA-15 catalyst exhibited excellent stability at 800 ℃ for time on stream of 740 h. After the reaction, carbon deposits were not formed on the surface of the catalyst. There existed a regular hexagonal mesoporous structure in the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts. The nickel species and the CexZr1-xO2 component were all confined in the SBA-15 mesopores. The CexZr1-xO2 could promote dispersion of the nickel species in the Ni/CexZr1-xO2/SBA-15 catalysts.

Tuning the properties of Ni-based catalyst via La incorporation for efficient hydrogenation of petroleum resin

The hydrogenation of petroleum resin(PR)is an effective process to prepare high value-added hydrogenated PR(HPR).However,the preparation of non-noble metal-based catalysts with high catalytic activity for PR hydrogenation still remains a challenge.Herein,a La promoted Ni-based catalyst is reported through the thermal reduction of quaternary Ni La Mg Al-layered double hydroxides(Ni La Mg Al-LDHs).The incorporation of La is beneficial to the reduction and stability of Ni particles with reduced particle size,and the increased alkalinity effectively mitigates the breakage of molecular chains of PR.As a result,the La promoted Ni-based catalyst exhibits high catalytic activity and excellent stability for PR hydrogenation.A hydrogenation degree of 95.4%and 96.1%can be achieved for HC_(5)PR and HC_(9) PR with less reduced softening point,respectively.Notably,the hydrogenation degree still maintains at 92.7%even after 100 hours’reaction,much better than that without La incorporation or prepared using conventional impregnation method.

Effect of Cu promoter on Ni-based SBA-15 catalysts for partial oxidation of methane to syngas

A series of Ni/SBA-15 catalysts with 5wt% to 15wt% Ni content as well as a series of 12.5%Ni/Cu/SBA-15 catalysts with 1% to 10% copper content were prepared by the impregnation method. The catalytic performance for partial oxidation of methane was investigated in a continuous flow microreactor under atmospheric pressure. The textural and chemical properties of the catalysts were characterized by XRD, TEM, BET and Hz-TPR techniques. The results indicated that the catalysts modified with Cu promoter showed better performance than those without modification. For the 12.5%Ni/2.5%/Cu/SBA-15 catalyst, at 850 ℃ the conversion of CH4 reached 97.9% and the selectivity of CO and H2 reached 98.0% and 96.0%, respectively. In XRD patterns of the Ni/Cu/SBA-15 catalyst with 7.5 to 10% Cu contents there were CuO characteristic peaks beside NiO characteristic peaks. The mesoporous structure of SBA-15 was retained in all of the catalysts. TPR analysis of the catalysts revealed that a strong interaction between Ni, Cu promoter and SBA-15 support may be existed. This interaction enhanced significantly the redox properties of the catalysts resulting in the higher catalytic activity.

Effect of MgO promoter on Ni-based SBA-15 catalysts for combined steam and carbon dioxide reforming of methane

A series of Ni/SBA-15 catalysts with Ni contents ranging from 5 wt% to 15 wt%, as well as another series of 10%Ni/MgO/SBA-15 catalysts, in which the range of the MgO content was from 1 wt% to 7 wt%, were prepared, and their catalytic performances for the reaction of combined steam and carbon dioxide reforming of methane were investigated in a continuous flow microreactor. The structures of the catalysts were characterized using the XRD, H2-TPR and CO2-TPD techniques. The results indicated that the CO selectivity for this reaction was very close to 100%, and the H2/CO ratio of the product gas could be controlled by changing the H2O/CO2 molar ratio of the feed gas. The simultaneous and plentiful existing of steam and CO2 had a significant influence on the catalytic performance of the 10%Ni/SBA-15 catalyst without modification. After reacting at 850 °C for 120 h over this catalyst, the CH4 conversion dropped from 98% to 85%, and the CO2 conversion decreased from 86% to 53%. However, the 10%Ni/3%MgO/SBA-15 catalyst exhibited a much better catalytic performance, and after reacting for 620 h, the CO2 conversion over this catalyst dropped from 92% to around 77%, while the CH4 conversion was not decreased. Oxidation of the Ni0 species as well as carbon deposition during the reaction were the main reasons for the deactivation of the catalyst without modification. On the other hand, modification by the MgO promoter improved the dispersion of the Ni0 species, and enhanced the CO2 adsorption affinity which in turn depressed the occurring of carbon deposition, and thus retarded the deactivation process.

Effect of O_2 and H_2O on the tri-reforming of the simulated biogas to syngas over Ni-based SBA-15 catalysts

A series of Ni/SBA-15 catalysts with Ni contents from 7.5 wt% to 15 wt% were prepared by impregnation method.The effect of O2 and H2O on the combined reforming of the simulated biogas to syngas was investigated in a continuous flow fixed-bed micro-reactor.The stability of the catalyst was tested at 800 ？C.The results indicated that 10wt%Ni/SBA-15 catalyst exhibited the highest catalytic activities for the combined reforming of the simulated biogas to syngas.Under the reaction conditions of the feed gas molar ratios CH4/CO2/O2/H2O = 2/1/0.6/0.6,GHSV = 24000 ml·gcat^-1·h^-1 and the reaction temperature T = 800 ℃,the conversions of CH4 and CO2 were 92.8% and 76.3%,respectively,and the yields of CO and H2 were 99.0% and 82.0%,respectively.The catalytic activities of the catalyst did not decrease obviously after 100 h reaction time on stream.

Studies on Catalysis in Partial Oxidation of Methane to Syngas(Ⅰ)──Performance and Characterization of Ni-based Catalysts

Highly active and selective Ni-based catalysts for partial oxidation of methane (POM) to syngas (CO/H,) have been studied and developed. Spectroscopic characterization by XRD, XPS, EPR, etc. demonstrated that under the POM reaction conditions, the Ni-components of the catalysts investigated were reduced and enriched on the surface to form metallic Ni0-phase. A comparative study of the first series of transition-metals showed that only Ni and Co have a high POM activity and selectivity, whereas the others (including Mn, Fe, Cu, etc. ) give mainly complete combustion products, Co, and H2O. The results favor the following viewpoints: the PoM activity is related with the rapidly changeable valence transitionmetal sites, M0/M2+ (e. g. Ni0/Ni2+ ), on the surface of the functioning catalysts;the transition-metal sites in zero-valence state seem to be responsible for the activation and dehydrogenation of methane by homolytic splitting of its C-H bonds on these sites. and the nature of rapidly changeable valence of the active sties is requisite for activation and rapid conversion of dioxygen.

Optimizing the oxide support composition in Pr-doped CeO_(2) towards highly active and selective Ni-based CO_(2) methanation catalysts

In this study,Ni catalysts supported on Pr-doped Ce O_(2) are studied for the CO_(2) methanation reaction and the effect of Pr doping on the physicochemical properties and the catalytic performance is thoroughly evaluated.It is shown,that Pr^(3+)ions can substitute Ce^(4+)ones in the support lattice,thereby introducing a high population of oxygen vacancies,which act as active sites for CO_(2) chemisorption.Pr doping can also act to reduce the crystallite size of metallic Ni,thus promoting the active metal dispersion.Catalytic performance evaluation evidences the promoting effect of low Pr loadings(5 at%and 10 at%)towards a higher catalytic activity and lower CO_(2) activation energy.On the other hand,higher Pr contents negate the positive effects on the catalytic activity by decreasing the oxygen vacancy population,thereby creating a volcano-type trend towards an optimum amount of aliovalent substitution.

Improvement strategies for Ni-based alcohol steam reforming catalysts

Steam reforming(SR)of fossil methane is already a well-known,documented and established expertise in the industrial sector as it accounts for the vast majority of global hydrogen production.From a sustainable development perspective,hydrogen production by SR of biomass-derived feedstock represents a promising alternative that could help to lower the carbon footprint of the traditional process.In this regard,bio-alcohols such as methanol,ethanol or glycerol are among the attractive candidates that could serve as green hydrogen carriers as they decompose at relatively low temperatures in the presence of water compared to methane,allowing for improved H_(2)yields.However,significant challenges remain regarding the activity and stability of nickel-based catalysts,which are most widely used in alcohol SR processes due to their affordability and ability to break C–C,O–H and C–H bonds,yet are prone to rapid deactivation primarily caused by coke deposition and metal particle sintering.In this state-of-the-art review,a portfolio of strategies to improve the performance of Ni-based catalysts used in alcohol SR processes is unfolded with the intent of pinpointing the critical issues in catalyst development.Close examination of the literature reveals that the efforts tackling these recurring issues can be directed at the active metal,either by tuning Ni dispersion and Ni-support interactions or by targeting synergistic effects in bimetallic systems,while others focus on the support,either by modifying acid-base character,oxygen mobility,or by embedding Ni in specific crystallographic structures.This review provides a very useful tool to orient future work in catalyst development.

Pt-Ru Catalysts Prepared by a Modified Polyol Process for Direct Methanol Fuel Cells

Supported PtRu/C catalysts used in direct methanol fuel cells (DMFCs) were prepared by a new modified polyol method. Transmission electron microscopy (TEM), X-ray diffraction (XRD) and cyclic voltammograms (CVs) were carried out to characterize the morphology, composition and the electrochemical properties of the PtRu/C catalyst. The results revealed that the PtRu nanoparticles with small average particle size (≈2.5 nm), and highly dispersed on the carbon support. The PtRu/C catalyst exhibited high catalytic activity and anti poisoned performance than that of the JM PtRu/C. It is imply that the modified polyol method is efficient for PtRu/C catalyst preparation.

Catalytic steam reforming of biomass over Ni-based catalysts: Conversion from poplar leaves to hydrogen-rich syngas

A series of Ni/SBA-15 catalysts with Ni contents from 5 wt%–20 wt%and CaO-12.5%Ni/SBA-15 catalysts with CaO contents from 1.4 wt%– 9.8 wt%have been prepared.The structure of the catalysts was characterized using X-ray diffraction（XRD）,N2 adsorption-desorption,transmission electron microscopy（TEM）and X-ray photoelectron spectroscopy（XPS）.The performance of catalytic steam reforming of the poplar leaves to the hydrogen-rich syngas was tested in a fixed-bed reactor.The results indicate that the 7.0wt%CaO-12.5wt%Ni/SBA-15 catalyst exhibits the best performance for the catalytic steam reforming of poplar leaves to hydrogen-rich syngas.The ratio of H2：CO can reach ca 5：1 in the hydrogen-rich syngas.The yield of H2 can reach 273.30 mL/g（poplar leaves）.In the CaO-Ni/SBA-15 catalyst,Ni active component mainly fills the role of catalytic steam reforming of the poplar leaves,and CaO active component mainly plays the role as water-gas shift and CO2 sorbent.

Recent progress of Ni-based catalysts for methanol electrooxidation reaction in alkaline media

Methanol as an important hydrogen-rich fuel has received increasing attention in energy storage and conversion techniques,and energy release can be realized in the methanol oxidation reaction(MOR)process.Note that highly efficient catalysts are still required to drive methanol oxidation,and the Ni-based catalysts have received intensive attention due to their facile active site generation based on the electrochemical-chemical oxidation mechanisms.In light of the significant advances made recently,herein,we reviewed the recent advances of Ni-based catalysts for methanol oxidation in the alkaline medium.The fundamental of methanol oxidation in the alkaline medium was first presented,and then the catalyst design principles including synergistic effect,electronic effect,defect construction,doping effect,as well as surface reconstruction were presented;and the advances of various Ni-based catalysts for MOR are summarized and discussed by combining with some typical examples.The problems and challenges were also concluded for the Ni-based catalyst fabrication,the performance evaluation,and their application.We believe that the summary of this review will be helpful in the design of nickel-based catalysts and understanding the catalysis mechanism of nickel-based materials in alcohol fuel electrochemical reactions.

Study on Deactivation and Regeneration of Modified Red Mud Catalyst Used in Biodiesel Production

Deactivation of solid catalyst often occurs in biodiesel production. In this work, deactivated modified red mud catalysts used in biodiesel production were regenerated with hexane and calcination treatments. The deactivated and regenerated catalysts were characterized using XRD, FTIR, SEM, TG, N2 adsorption, measured for their basic strength, and tested in the transesterification of canola oil. The results revealed that the main cause of the catalyst deactivation is due to obstruction of the active sites by contaminants. The regeneration by washing with hexane followed by calcination can effectively improve the properties of the deactivated catalyst and increase its catalytic activity.

Synthesis and Characterization of Poly（Lactide）s Using Novel Solid Cloisite Modified Tin Catalyst

A novel cloisite modified solid catalyst was prepared in a single step from commercially available starting materials for the first time. The ring opening polymerization of L-lactide and D-lactide using this cloisite modified solid catalyst resulted in homopolymers of 75,000 and PDI = 1.6 and the maximum molecular weight （Mw） i.e. 180,000 with PDI = 1.9 were obtained. The catalytic activity ofcloisite modified solid catalyst was compared with the conventional stannous octoate catalyst and found superior to stannous octoate in all respect such as conversion, molecular weight and molecular weight distribution etc.. Moreover, the maximum molecular weight i.e. 180,000 was obtained at 220 ℃, whereas, transesterification reaction predominate in presence of stannous octoate The linear structure was confirmed by quantitative ^13C NMR Spectroscopy. Blend films were obtained by casting mixed solutions of poly （D-lactide） and poly （L-lactide） at various compositions, and stereocomplex was formed at 50/50 composition with molecular weight of 75,000.

Direct decomposition of nitric oxide in low temperature over iron-based perovskite-type catalyst modified by Ru

Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.

IR AND EPR STUDIES OF THE NUCLEAR ALKYLATION OF TOLUENE AND ETHYLENE ON THE MODIFIED Mg—AND P—ZSM—5 CATALYST

The surface intermediate (C_2H_5^+ and CH_3C_6H_5^+) and the reactive pathway of nuclear alkylation of toluene with ethylene to para—ethyl toluene over Mg salt and phosphorus acid modified ZSM—5 zeolites have been studied by 1R and EPR methods.

THE DIFFUSION OF m-XYLENE ON MODIFIED ZnZSM-5 AROMATIZATION CATALYST BEFORE AND AFTER COKING

The effect of coking amount for diffusion rate of m—xylene in a pore of the modified ZnZSM—5 aromatization catalyst has been studied.

EFFECT OF Ni CRYSTAL SIZE DISTRIBUTION ON THE ANTICOKING BEHAVIOR OF La-MODIFIED Ni/α-Al_2O_3 CATALYSTS

The crystal size distribution（CSD）was determined with small angle X-ray scattering technique.Theanticoking property of Ni-catalysts was investigated with the steam reforming of n-heptane in a TG-monitoredflow reactor.The results of this study show that the rate of coking on the supported Ni-catalysts depends main-ly on the percentage content of the large size fraction（25-70nm）of Ni-crystallites,and that the dispersion ofNi-crystallites and the anticoking property of the Ni/α-Al2O3 catalysts were promoted obviously by theLa2O3-modification method.The variation of the Ni-CSD and the anticoking property of the catalysts were fur-ther tested through different periods of hydrothermal treatment.It is found that the content of the largeNi-crystal size fraction and the coking rate pass correspondingly through a maximum.