High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utiliz...High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utilization.To address this problem,a novel method of co-precipitation modification with Ca,Mg and Zr metals was proposed to improve the CO_(2)capture performance.X-ray diffraction(XRD)patterns and energy dispersive X-ray spectroscopy analysis showed that the two inert supports MgO and CaZrO_(3)were uniformly distributed in the modified calcium-based sorbents.In addition,the XRD results indicated that CaZrO_(3)was produced by the reaction of ZrO_(2)and CaO at high temperatures.The effects of doping ratios,adsorption temperature,calcination temperature,CO_(2)concentration and calcination atmosphere on the adsorption capacity and cycle stability of the modified calcium-based sorbent were studied.The modified calcium-based sorbent achieved the best CO_(2)capture performance when the doping ratio was 10:1:1 with carbonation at 700℃ under 20%CO_(2)/80%N_(2)atmosphere and calcination at 900℃ under100%N_(2)atmosphere.After ten cycles,the average carbonation conversion rate of Ca-10 sorbent was 72%.Finally,the modified calcium-based sorbents successfully reduced the CO_(2)concentration of the pyrolysis gas from 37%to 5%.展开更多
The H2S removal characteristics of Taxada lime tinder the high temperature of 600-900℃ have been investigated. The test results indicated that this kind of sorbent almost was inert to H2S When temperature lowered dow...The H2S removal characteristics of Taxada lime tinder the high temperature of 600-900℃ have been investigated. The test results indicated that this kind of sorbent almost was inert to H2S When temperature lowered down to 600℃,while its reactivity increased with increased temperature and the equilibrium conversion reached up to over 60% at temperatLlre of 900℃.However, side reactions of H2S in conjunction with high-temperature decomposition and mineral catalysis to elemental sulfur and sulfur dioxide were testified.展开更多
The CO_2 absorption ability of synthetic calcium-based sorbent modified by peanut husk ash (PHA) was tested by Thermal Gravimetric Analyzer (TGA), and the effects of steam and calcination temperature were investigate...The CO_2 absorption ability of synthetic calcium-based sorbent modified by peanut husk ash (PHA) was tested by Thermal Gravimetric Analyzer (TGA), and the effects of steam and calcination temperature were investigated. The PHA composition was analyzed by X-Ray Fluorescence (XRF), the apparent morphology was characterized by scanning electron microscope (SEM), and the phases of the sorbent before and after calcination were examined by X-ray diffraction (XRD). The addition of PHA effectively improved the cyclic stability of the calcium-based sorbent. The optimal molar ratio of SiO_2 in PHA to CaO was around 0.07. Steam had positive effect on keeping porosity of the sorbent at the chemical reaction stage, and improved its CO_2 absorption ability. Steam also reduced the diffusion resistance of the product layer, and depressed the influence of high temperature calcination. It was also found that the steam hydration after calcination was an effective way to recover the absorption ability of the sorbent, while the hydration duration of 10 min was enough.展开更多
In order to reduce the impact of eutrophication caused by agricultural residues （i.e., excess nitrate） in aqueous solution, economic and effective anionic sorbents are required. In this article, we prepared anionic ...In order to reduce the impact of eutrophication caused by agricultural residues （i.e., excess nitrate） in aqueous solution, economic and effective anionic sorbents are required. In this article, we prepared anionic sorbent using wheat straw. Its structural characteristics and adsorption properties for nitrate removal from aqueous solution were investigated. The results indicate that the yield of the prepared anionic sorbent, the total exchange capacity, and the maximum adsorption capacity were 350%, 2.57 mEq/g, and 2.08 mmol/g, respectively. The Freundlich isotherm mode is more suitable than the Langmuir mode and the adsorption process accords with the first order reaction kinetic rate equation. When multiple anions （SO4^2-, H2PO4^-, NO3^-, and NO2^-） were present, the isotherm mode of prepared anionic sorbent for nitrate was consistent with Freundlich mode; however, the capacity of nitrate adsorption was reduced by 50%. In alkaline solutions, about 90% of adsorbed nitrate ions could be desorbed from prepared anionic sorbent. The results of this study confirmed that the wheat straw anionic sorbent can be used as an excellent nitrate sorbent that removes nitrate from aqueous solutions.展开更多
Large quantities of contaminated biomass due to phytoremediation were disposed through combustion in low-income rural regions of China.This process provided a solution to reduce waste volume and disposal cost.Pilot-sc...Large quantities of contaminated biomass due to phytoremediation were disposed through combustion in low-income rural regions of China.This process provided a solution to reduce waste volume and disposal cost.Pilot-scale combustion trials were conducted for in site disposal at phytoremediation sites.The reaction mechanism of arsenic capture during pilot-scale combustion should be determined to control the arsenic emission in flue gas.This study investigated three Pteris vittata L.biomass with a disposal capacity of 600 kg/d and different arsenic concentrations from three sites in China.The arsenic concentration in flue gas was greater than that of the national standard in the trial with no emission control,and the arsenic concentration in biomass was 486 mg/kg.CaO addition notably reduced arsenic emission in flue gas,and absorption was efficient when CaO was mixed with biomass at 10% of the total weight.For the trial with 10% CaO addition,arsenic recovery from ash reached 76%,which is an ~8-fold increase compared with the control.Synchrotron radiation analysis confirmed that calcium arsenate is the dominant reaction product.展开更多
This paper presents methods of modifying the active carbon with oxidizing agent and high temperature treatment.The ion exchange capacity of modified active carbon were detected.The active carbon has been amployed as a...This paper presents methods of modifying the active carbon with oxidizing agent and high temperature treatment.The ion exchange capacity of modified active carbon were detected.The active carbon has been amployed as an adsorbent for removing of Cr(Ⅲ) from equeous solution.The effect of removal of Cr(Ⅲ) of the pH of solution and time of adsorption were discussed.In addition,the mechanism of adsorption with modified the active carbon for Cr(Ⅲ) were discussed.展开更多
基金the support given by the National Key Research and Development Program of China(2018YFC1901203)Natural Science Foundation of Guangdong Province,China(2021A1515010497)+1 种基金Guangzhou Science and Technology Innovation Development Special FundFundamental Research Funds for the Central Universities(2019MS017)。
文摘High-temperature pyrolysis technology can effectively solve the problem of municipal solid waste pollution.However,the pyrolysis gas contains a large amount of CO_(2),which would adversely affect the subsequent utilization.To address this problem,a novel method of co-precipitation modification with Ca,Mg and Zr metals was proposed to improve the CO_(2)capture performance.X-ray diffraction(XRD)patterns and energy dispersive X-ray spectroscopy analysis showed that the two inert supports MgO and CaZrO_(3)were uniformly distributed in the modified calcium-based sorbents.In addition,the XRD results indicated that CaZrO_(3)was produced by the reaction of ZrO_(2)and CaO at high temperatures.The effects of doping ratios,adsorption temperature,calcination temperature,CO_(2)concentration and calcination atmosphere on the adsorption capacity and cycle stability of the modified calcium-based sorbent were studied.The modified calcium-based sorbent achieved the best CO_(2)capture performance when the doping ratio was 10:1:1 with carbonation at 700℃ under 20%CO_(2)/80%N_(2)atmosphere and calcination at 900℃ under100%N_(2)atmosphere.After ten cycles,the average carbonation conversion rate of Ca-10 sorbent was 72%.Finally,the modified calcium-based sorbents successfully reduced the CO_(2)concentration of the pyrolysis gas from 37%to 5%.
文摘The H2S removal characteristics of Taxada lime tinder the high temperature of 600-900℃ have been investigated. The test results indicated that this kind of sorbent almost was inert to H2S When temperature lowered down to 600℃,while its reactivity increased with increased temperature and the equilibrium conversion reached up to over 60% at temperatLlre of 900℃.However, side reactions of H2S in conjunction with high-temperature decomposition and mineral catalysis to elemental sulfur and sulfur dioxide were testified.
基金supported by the National Natural Science Foundation of China (Grant No. 51406198)
文摘The CO_2 absorption ability of synthetic calcium-based sorbent modified by peanut husk ash (PHA) was tested by Thermal Gravimetric Analyzer (TGA), and the effects of steam and calcination temperature were investigated. The PHA composition was analyzed by X-Ray Fluorescence (XRF), the apparent morphology was characterized by scanning electron microscope (SEM), and the phases of the sorbent before and after calcination were examined by X-ray diffraction (XRD). The addition of PHA effectively improved the cyclic stability of the calcium-based sorbent. The optimal molar ratio of SiO_2 in PHA to CaO was around 0.07. Steam had positive effect on keeping porosity of the sorbent at the chemical reaction stage, and improved its CO_2 absorption ability. Steam also reduced the diffusion resistance of the product layer, and depressed the influence of high temperature calcination. It was also found that the steam hydration after calcination was an effective way to recover the absorption ability of the sorbent, while the hydration duration of 10 min was enough.
基金Project supported by the Key Science Project of Environmental Protection Foundation of Shandong Government(No.(2006)005).
文摘In order to reduce the impact of eutrophication caused by agricultural residues （i.e., excess nitrate） in aqueous solution, economic and effective anionic sorbents are required. In this article, we prepared anionic sorbent using wheat straw. Its structural characteristics and adsorption properties for nitrate removal from aqueous solution were investigated. The results indicate that the yield of the prepared anionic sorbent, the total exchange capacity, and the maximum adsorption capacity were 350%, 2.57 mEq/g, and 2.08 mmol/g, respectively. The Freundlich isotherm mode is more suitable than the Langmuir mode and the adsorption process accords with the first order reaction kinetic rate equation. When multiple anions （SO4^2-, H2PO4^-, NO3^-, and NO2^-） were present, the isotherm mode of prepared anionic sorbent for nitrate was consistent with Freundlich mode; however, the capacity of nitrate adsorption was reduced by 50%. In alkaline solutions, about 90% of adsorbed nitrate ions could be desorbed from prepared anionic sorbent. The results of this study confirmed that the wheat straw anionic sorbent can be used as an excellent nitrate sorbent that removes nitrate from aqueous solutions.
文摘Large quantities of contaminated biomass due to phytoremediation were disposed through combustion in low-income rural regions of China.This process provided a solution to reduce waste volume and disposal cost.Pilot-scale combustion trials were conducted for in site disposal at phytoremediation sites.The reaction mechanism of arsenic capture during pilot-scale combustion should be determined to control the arsenic emission in flue gas.This study investigated three Pteris vittata L.biomass with a disposal capacity of 600 kg/d and different arsenic concentrations from three sites in China.The arsenic concentration in flue gas was greater than that of the national standard in the trial with no emission control,and the arsenic concentration in biomass was 486 mg/kg.CaO addition notably reduced arsenic emission in flue gas,and absorption was efficient when CaO was mixed with biomass at 10% of the total weight.For the trial with 10% CaO addition,arsenic recovery from ash reached 76%,which is an ~8-fold increase compared with the control.Synchrotron radiation analysis confirmed that calcium arsenate is the dominant reaction product.
文摘This paper presents methods of modifying the active carbon with oxidizing agent and high temperature treatment.The ion exchange capacity of modified active carbon were detected.The active carbon has been amployed as an adsorbent for removing of Cr(Ⅲ) from equeous solution.The effect of removal of Cr(Ⅲ) of the pH of solution and time of adsorption were discussed.In addition,the mechanism of adsorption with modified the active carbon for Cr(Ⅲ) were discussed.
