A Glassy Carbon Electrode Modified with Cellulose Nanofibrils from Ammophila arenaria for the Sensitive Detection of L-Trytophan

L-tryptophan is an essential amino acid for human health. Nanofibrillated cellulose (NFC) from marram grass (Ammophila arenaria) extracted from plants harvested in the center of Tunisia was used for the first time for the modification of a glassy carbon electrode (GCE), for the sensitive detection of L-tryptophan (Trp). After spectroscopic and morphological characterization of the extracted NFC, the GC electrode modification was monitored through cyclic voltammetry. The NFC-modified electrode exhibited good analytical performance in detecting Trp with a wide linear range between 7.5 × 10−4 mM and 10−2 mM, a detection limit of 0.2 µM, and a high sensitivity of 140.0 µA∙mM−1. Additionally, the NFC/GCE showed a good reproducibility, good selectivity versus other amino acids, uric acid, ascorbic acid, and good applicability to the detection of Trp in urine samples.

Electrochemical Degradation of Indigocarmine Dye at Ni/Graphite Modified Electrode in Aqueous Solution

Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrode and the Ni/graphite modified electrode has been carried out. The different effects of concentration, current density and temperature on the rate of degradation were studied. This study shows that the rate of the degradation is more for Ni doped modified graphite electrode. UV-Visible spectra before and after degradation of the dye solution were observed. The thin film formation of Ni or encapsulated in graphite rod is observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM & EDAX). The instantaneous current effectiveness values of different experimental conditions are evaluated. The anodic oxidation by Ni/ graphite modified electrode showed the complete degradation of aqueous solution indigocarmine, which is confirmed by UV-Visible and chemical oxygen demand (COD) measurements. The dye is converted into CO2, H2O and simpler inorganic salts. The results observed for reuse of modified electrodes indicate that the Ni/graphite modified electrode would be a promising anode for electrochemical degradation of indigocarmine. This method can be applied for the remediation of waste water containing organics, cost-effective and simple.

OTFT with Bilayer Gate Insulator and Modificative Electrode

An organic thin-film transistor （OTFT） with an OTS/SiO2 bilayer gate insulator and a MoO3/AI electrode configuration between gate insulator and source/drain electrodes has been investigated. A thermally grown SiO2 layer is used as the OTFT gate dielectric and copper phthalocyanine（CuPc） is used as an active layer. This OTS/SiO2 bilayer gate insulator configuration increases the field-effect mobility, reduces the threshold voltage, and improves the on/off ratio simultaneously. The device with a MoO3/Al electrode has shown similar Ids compared to the device with an Au electrode at the same gate voltage. Our results indicate that using a double-layer of electrodes and a double-layer of insulators is an effective way to improve OTFT performance.

Study of enzyme biosensor based on carbon nanotubes modified electrode for detection of pesticides residue

The paper describes a controllable layer-by-layer （LBL） self-assembly modification technique of multi-walled carbon nanotubes （MWNTs） and poly（diallyldimethylammonium chloride） （PDDA） towards glassy carbon electrode （GCE）, Acetylcholinesterase （ACHE） was immobilized directly to the modified GCE by LBL self-assembly method, the activity value of AChE was detected by using i-t technique based on the modified Ellman method. Then the composition of carbaryl were detected by the enzyme electrode with 0.01U activity value and the detection limit of carbaryl is 10^- 12 g L ^-1 so the enzyme biosensor showed good properties for pesticides residue detection.

Sensitive Voltammetric Determination of Captopril Using a Carbon Paste Electrode Modified with Nano-TiO_2/Ferrocene Carboxylic Acid

A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods. The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values. Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV. The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques. A calibration curve in the range of 0.03 to 2400 μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3?) under the optimized conditions. The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.

A Multiwall Carbon Nanotube-chitosan Modified Electrode for Selective Detection of Dopamine in the Presence of Ascorbic Acid

A novel multiwall carbon nanotube-chitosan modified electrode has been prepared.The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbicacid into two well-defined peak by 212 mV. The mechanism of discrimination of dopamine fromascorbic acid is discussed. Dopamine can be determined selectively with the carbonnanotube-chitosan modified electrode. The electrode shows good sensitivity, selectivity andstability.

Electrochemical studies of chloroperoxidase on poly-L-lysine film modified GC electrode

Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC).The electrochemical behaviors of immobilized CPO on PLL/GC electrode were investigated by cyclic voltammetry(CV).The CV results obtained showed that CPO was successfully immobilized on the PLL/GC electrode and a fast direct electron transfer between CPO and PLL-GC electrod...

A selective voltammetric detection for dopamine using poly(gallic acid) film modified electrode

The electrochemistry behavior of dopamine was investigated by cyclic voltammetry and differential pulse voltammetry at a poly (gallic acid) film modified glassy carbon electrode.Two electrons and two protons participated in the diffusion-controlled electrocatalytic oxidation of dopamine with a diffusion coefficient of 2.186×10^(-5) cm^2/s.The interference of ascorbic acid with the determination of dopamine could be efficiently eliminated.This work provided a simple approach to selectively and sensitively de...

Electrocatalytic oxidation of methanol at platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes

The electrocatalytic oxidation of methanol at the platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes (Eu-Fe film) was investigated for the first time by cyclic voltammetry.Compared with the bare platinum electrode,the results showed that the modified electrode had excellent electrocatalytic activity for the oxidation of methanol;the oxidation peak potential shifted more negatively and the peak current increased about twenty times.The electrooxidation of methanol at the modified elect...

Study of the electrochemical properties of a transition metallic ions modified electrode in acidic VOSO_4 solution

Graphite material was used as the electrode for an all-vanadium redox flow battery, and the electrode was modified by transition metallic ions to enhance its electrochemical behavior. An porous graphite composite electrode has high specific surface area and high current density. The electrode modified by transition metallic ions has improved catalysis behavior that can catalyze the V（Ⅱ）-V（Ⅴ） redox reaction showed by cyclic voltammograms. This article studied the impedance of the modified electrode by electrochemical impedance spectroscopy （EIS）, and approved that the electrode modified by Co^2＋ and Mn^2＋ has a lower charge transfer resistance than the non-modified electrode. The effect of average particle size distribution is at lower frequencies that the slope of Warburg impedance is reduced by large particle size distribution. The voltage efficiency of the Co^2＋ modified electrode test cell is 81.5%, which is higher than that of the non-modified electrode.

Electrochemical Studies of Pirarubicin and Its Interaction with DNA at a Co/GC Ion Implantation Modified Electrode

The electrochemical behavior of pirarubicin(THP) and its interaction with DNA at a Co/GC modified electrode was studied by linear sweep and cyclic voltammetries. In a 0.01 mol/L B-R buffer solution(pH=7.0), the reaction of DNA with THP formed an electrochemical nonactive complex, resulting in a decrease in the THP equilibrium concentration and its reduction current. The composition of the complex was THP∶DNA=2∶1. The combining constant is 2.73×10 10 . The electrode reaction rate constant k s and the electron transfer coefficient α are 1.32 s -1 and 0.56, respectively. The decrease in the peak current was proportional to the DNA concentration and was used to determine the DNA concentration. The experiment of XPS showed that Co was surely implanted into the surface of GCE(glassy carbon electrode) and the implanted Co at GCE can improve the electrocatalytic activity.

Preparation of the Ag_2O_2-PbO_2 Modified Electrode and Its Application towards Escherichia coli Fast Counting in Water

A novel nano crystalline Ag2O2-PbO2 film chemically modified electrode (CME) was prepared and the CME was characterized by X-ray diffractometer (XRD) and atomic force microscope (AFM). By chronoamperometry, the nano Ag2O2-PbO2 CME was used as bioelectro- chemical sensor to determine the population of Escherichia coli (E. coli) in water. Compared with conventional methods, it is found that the technique we used is fast and convenient in counting E. coli.

Electrochemical Properties of Polypyrrole-Coated Microelectrode Array and the Fabrication of Polypyrrole-Based Microelectronic Devices

Conducting polymers have been studied extensively. An interesting property of the conducting polymer is that the conductivity of some polymers, such as polypyrrolc, polyaniline, poly(3-methylthiophene) etc. , is affected by the voltage applied to them. For polypyrrole, the oxidized state is an electronic conductor and the reduced state is essentially insulating. Using this property, one can fabricate the polymer-based electronic devices. Experimental results of Pickun

Electrochemical determination of vitamin C in the presence of uric acid by a novel TiO_2 nanoparticles modified carbon paste electrode

The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.

Electrocatalytic oxidation of hydrazine on magnetic bar carbon paste electrode modified with benzothiazole and iron oxide nanoparticles: Simultaneous determination of hydrazine and phenol

A magnetic bar carbon paste electrode （MBCPE） modified with Fe3O4 magnetic nanoparticles （Fe3O4NPs） and 2‐（3,4‐dihydroxyphenyl） benzothiazole （DPB） for the electrochemical determina‐tion of hydrazine was developed. The DPB was firstly self‐assembled on the Fe3O4NPs, and the re‐sulting Fe3O4NPs/DPB composite was then absorbed on the designed MBCPE. The MBCPE was used to attract the magnetic nanoparticles to the electrode surface. Owing to its high conductivity and large effective surface area, the novel electrode had a very large current response for the electrocat‐alytic oxidation of hydrazine. The modified electrode was characterized by voltammetry, scanning electron microscopy, electrochemical impedance spectroscopy, infrared spectroscopy, and UV‐visible spectroscopy. Voltammetric methods were used to study the electrochemical behaviour of hydrazine on MBCPE/Fe3O4NPs/DPB in phosphate buffer solution （pH = 7.0）. The MBCPE/Fe3O4NPs/DPB, acting as an electrochemical sensor, exhibited very high electrocatalytic activity for the oxidation of hydrazine. The presence of DPB was found to reduce the oxidation potential of hydrazine and increase the catalytic current. The dependence of the electrocatalytic current on the hydrazine concentration exhibited two linear ranges, 0.1–0.4 μmol/L and 0.7–12.0 μmol/L, with a detection limit of 18.0 nmol/L. Additionally, the simultaneous determination of hydrazine and phe‐nol was investigated using the MBCPE/Fe3O4NPs/DPB electrode. Voltammetric experiments showed a linear range of 100–470 μmol/L and a detection limit of 24.3 μmol/L for phenol, and the proposed electrode was applied to the determination of hydrazine and phenol in water samples.

Determination of 6-Mercaptopurine in Rat Blood by Microdialysis Coupled with High Performance Liquid Chromatography on a Functionalized Multi-wall Carbon Nanotubes Modified Electrode

A new chemically modified electrode(CME) immobilized on the surface of multi-wall carbon nanotubes functionalized with carboxylic groups was fabricated. The results indicate that the CME exhibits efficiently electrocatalytic oxidation of 6-mercaptopurine(6-MP). The CME can be used as the working electrode in the liquid chromatography for the determination of 6-MP. The peak current of 6-MP is linearly changed with its concentration ranging from 4.0×10 -7 to 1.0×10 -4 mol/L with the calculated detection limit (S/N=3) of 2.0×10 -7 mol/L. Coupled with microdialysis sampling, the method has been successfully applied to assessing the content of 6-MP in rat blood.

Fe_3O_4 Magnetic Nanoparticles Modified Electrode as a Sensor for Determination of Nimesulide

A novel type of Fe3O4 nanoparticles modified glass carbon electrode（Fe3O4/GCE） was constructed and the electrochemical properties of N-（4-nitro-2-phenoxyphenyl）methanesulfonamide（nimesulide） were studied on the Fe3O4/GCE.In 0.4mol/L HAc-NaAc buffer solution（pH=5.0）,the electrode process of nimesulide was irreversible at bare GCE and Fe3O4/GCE.The Fe3O4/GCE exhibited a remarkable catalytic and enhancement effect on the reduction of nimesulide.The reduction peak potential of nimesulide shifted positively from-0.683 V at bare GCE to-0.625 V at Fe3O4/GCE,and the sensitivity was increased by ca.3 times.Some experimental conditions were optimized.The linear range between the peak current and the concentration of nimesulide was 2.6×10-6 ＂1.0×10-4mol/L（R=0.993） with a detection limit of 1.3×10-7mol/L.This method has been used to determine the content of nimesulide in medical tablets.The recovery was determined to be 96.9% ＂101.9% by means of standard addition method.The method is comparable to UV-Vis spectrometry.

Electrooxidation of Nitric Oxide at a Glass Carbon Electrode Modified with Functionalized Single-walled Carbon Nanotube

The electrocatalytic oxidation of nitric oxide（NO） at a glass carbon electrode（GC） modified with functionalized single-walled carbon nanotubes（SWCNTs） was investigated by cyclic voltammetry（CV） and electrochemical impedance spectroscopy（EIS）.It was found that the SWCNT modified electrode could speed greatly up the electron transfer rate compared with the bare GC electrode.After the SWCNT was treated with alkali or mixed acids,the reaction rate and activation energy of NO electrooxidation were changed to different extent.Chemical modification of the SWCNT surface is one of the most powerful methods to change the sensitivity of NO electrooxidation reaction.The modified electrode with SWCNT obtained by the firstly alkali treatment and then the mixed acids treatment was the best one for NO electrooxidation,the result of CV was also confirmed by that of EIS.The anodic processes of NO were recognized more clearly by exploring the reaction mechanism of NO electrooxidation at the SWCNT modified electrode.

Copper modified platinum electrode for amperometric detection of spectinomycin sulfate by anion-exchange chromatography

A La^3＋-Cu/Pt modified electrode was fabricated by electrodepositing process in CuS04 solution by adding a small amount of lanthium compound, and it was employed for direct current （DC） amperometric detection of spectinomycin by anion-exchange chromatography. Without derivatization, this method can simultaneously determine the main component and impurities in spectinomycin pharmaceutical raw material. Ease of preparation, being applied in DC detection mode and good catalytic stability confirmed the interests of this modified electrode as amperometric sensor for the determination of spectinomycin.

Studies on the Voltammetric Behavior of Nicardipine Hydrochloride and its Voltammetric Determination at the Co/GC Modified Electrode

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｔｅｃｈｎｉｑｕｅｏｆｉｏｎｉｍｐｌａｎｔａｔｉｏｎｈａｓｂｅｅｎｄｅｖｅｌｏｐｅｄａｓａｍｅａｎｓｏｆｉｎｔｒｏｄｕｃｔｉｎｇｆｏｒｅｉｇｎａｔｏｍｓｉｎｔｏｔｈｅｓｕｒｆａｃｅｌａｙｅｒｓｏｆａｓｏｌｉｄ．Ｔｈｉｓｔ...