The high voltage power supply （HVPS） based on pulse step modulation （PSM） has already been developed for the auxiliary heating system on HL-2A. This power supply consists of many switch power supplies, and its out...The high voltage power supply （HVPS） based on pulse step modulation （PSM） has already been developed for the auxiliary heating system on HL-2A. This power supply consists of many switch power supplies, and its output voltage can be obtained by modulating their delay time and pulse widths. The PSM topology and control principle are presented in this paper. The simple algorithms for the control system are explained clearly. The switch power supply （SPS） module has been built and the test results show it can meet the requirements of the auxiliary heating system. Now, 112 SPS modules and the whole system have already been developed. Its maximum output is about 72 kV/93 A. The protection time is less than 5 t＊s. The different outputs of this power supply are used for the electron cyclotron resonant heating （ECRH） system with different duty ratios. The experimental results of the entire system are presented. The results indicate that the whole system can meet the requirements of the auxiliary heating system on HL-2A.展开更多
The traditional communication system is effectively designed for the worst-case channel state and it can not use the spectral efficiently over the time-varying multipath channel. In order to improve the spectral effic...The traditional communication system is effectively designed for the worst-case channel state and it can not use the spectral efficiently over the time-varying multipath channel. In order to improve the spectral efficiency and ensure robust and spectrally-efficient transmission over the time-varying multipath channel,a joint rate control and adaptive modulation and coding ( AMC) algorithm for adaptive transmission systems is proposed in this paper. Firstly,the proposed algorithm can formulate a modulation and coding scheme ( MCS) switching table according to the offline simulation results and the target bit error rate ( BER) . Then,the optimal MCS is selected in MCS switching table according to the channel state information ( CSI) and then passes to the transmitter and receiver to implement. So the adaptive system which always uses the optimal MCS to transmit signals uses the spectral efficiently. The simulation results validate the proposed algorithm and show that under the premise of meeting the target BER,the adaptive system performing the proposed algorithm has a higher average spectral efficiency ( ASE) than that of the non-adaptive system.展开更多
A broadband monolithic linear single pole, eight throw （SP8T） switch has been fabricated in 180 nm thin film silicon-on-insulator （SOI） CMOS technology with a quad-band GSM harmonic filter in integrated passive de...A broadband monolithic linear single pole, eight throw （SP8T） switch has been fabricated in 180 nm thin film silicon-on-insulator （SOI） CMOS technology with a quad-band GSM harmonic filter in integrated passive devices （IPD） technology, which is developed for cellular applications. The antenna switch module （ASM） features 1.2 dB insertion loss with filter on 2G bands and 0.4 dB insertion loss in 3G bands, less than -45 dB isolation and maximum -103 dB intermodulation distortion for mobile front ends by applying distributed architecture and adaptive supply voltage generator.展开更多
Based on chaos shift keying approach, impulsive signals from Hyperchaotic Chen system and Hyperchaotic Lü system are alternately emitted according to the transmission of binary signals “0” and “1”. In the rec...Based on chaos shift keying approach, impulsive signals from Hyperchaotic Chen system and Hyperchaotic Lü system are alternately emitted according to the transmission of binary signals “0” and “1”. In the receiver, these two hyperchaotic systems are adopted as response systems at the same time. The digital signals are recovered via comparing the discrete signals of the two error systems. Numerical simulations show the effectiveness of the method.展开更多
文摘The high voltage power supply （HVPS） based on pulse step modulation （PSM） has already been developed for the auxiliary heating system on HL-2A. This power supply consists of many switch power supplies, and its output voltage can be obtained by modulating their delay time and pulse widths. The PSM topology and control principle are presented in this paper. The simple algorithms for the control system are explained clearly. The switch power supply （SPS） module has been built and the test results show it can meet the requirements of the auxiliary heating system. Now, 112 SPS modules and the whole system have already been developed. Its maximum output is about 72 kV/93 A. The protection time is less than 5 t＊s. The different outputs of this power supply are used for the electron cyclotron resonant heating （ECRH） system with different duty ratios. The experimental results of the entire system are presented. The results indicate that the whole system can meet the requirements of the auxiliary heating system on HL-2A.
基金Sponsored by the National Natural Science Foundation and Civil Aviation Administration of China(Grant No.61101122 and 61071104)the Science and Technology on Information Transmission and Dissemination in Communication Networks Laboratory(Grant No.ITD-U12004/K1260010)
文摘The traditional communication system is effectively designed for the worst-case channel state and it can not use the spectral efficiently over the time-varying multipath channel. In order to improve the spectral efficiency and ensure robust and spectrally-efficient transmission over the time-varying multipath channel,a joint rate control and adaptive modulation and coding ( AMC) algorithm for adaptive transmission systems is proposed in this paper. Firstly,the proposed algorithm can formulate a modulation and coding scheme ( MCS) switching table according to the offline simulation results and the target bit error rate ( BER) . Then,the optimal MCS is selected in MCS switching table according to the channel state information ( CSI) and then passes to the transmitter and receiver to implement. So the adaptive system which always uses the optimal MCS to transmit signals uses the spectral efficiently. The simulation results validate the proposed algorithm and show that under the premise of meeting the target BER,the adaptive system performing the proposed algorithm has a higher average spectral efficiency ( ASE) than that of the non-adaptive system.
文摘A broadband monolithic linear single pole, eight throw （SP8T） switch has been fabricated in 180 nm thin film silicon-on-insulator （SOI） CMOS technology with a quad-band GSM harmonic filter in integrated passive devices （IPD） technology, which is developed for cellular applications. The antenna switch module （ASM） features 1.2 dB insertion loss with filter on 2G bands and 0.4 dB insertion loss in 3G bands, less than -45 dB isolation and maximum -103 dB intermodulation distortion for mobile front ends by applying distributed architecture and adaptive supply voltage generator.
文摘Based on chaos shift keying approach, impulsive signals from Hyperchaotic Chen system and Hyperchaotic Lü system are alternately emitted according to the transmission of binary signals “0” and “1”. In the receiver, these two hyperchaotic systems are adopted as response systems at the same time. The digital signals are recovered via comparing the discrete signals of the two error systems. Numerical simulations show the effectiveness of the method.
