Theory and verification of moiréfringes for x-ray three-phase grating interferometer

Dual-phase and three-phase grating x-ray interference is a promising new technique for grating-based x-ray differential phase contrast imaging.Dual-phase grating interferometers have been relatively completely studied and discussed.In this paper,the corresponding imaging fringe formula of the three-phase grating interferometer is provided.At the same time,the similarities and differences between the three-phase grating interferometer and the dual-phase grating interferometer are investigated and verified,and that the three-phase grating interferometer can produce large-period moiréfringes without using the analyzing grating is demonstrated experimentally.Finally,a simple method of designing three-phase grating and multi-grating imaging systems from geometric optics based on the thin-lens theory of gratings is presented.These theoretical formulas and experimental results provide optimization tools for designing three-phase grating interferometer systems.

Wavelength Dependent Nonlinear Spectroscopic Study of Third Harmonic Generation Probed by Rotational Maker Fringes Method

Efficient third-order nonlinearities of the Zinc Oxide and Al-doped Zinc Oxide were studied by Third Harmonic Generation (Third Harmonic Generation) Maker fringes to establish the effect Aluminum of Aluminum doping (Al-doping) on the cubic nonlinearities. Adding the Al-dopant to the Zinc Oxide crystal structure results in changes that affect the optical and nonlinear characteristics. Presented results indicate that the magnitude of X(3) was enhanced at single experimental wavelengths;however, across the broadband experimental spectrum, the effect of Al-doping remained relatively constant. The observed enhancement of third-order nonlinearity was purely from the bound electronic response. The observation is attributed to increased charge carriers and spontaneous polarization in the Zinc Oxide and Al-doped Zinc Oxide crystal structure.

Concept Planning of Ecological Landscapes on Urban Fringes——A Case Study of Landscape Concept Planning of Shiling Area in the Eastern New District of Chengdu City, Sichuan Province of China

With Shiling Area of Eastern New District in Chengdu City as a background, concept design scheme was put forward from the perspective of ecological landscape through analyzing present development and ecological landscapes of the study area, applying philosophic thinking and Abstract concepts, and also combining with actual conditions of Chengdu, and meanwhile, concepts, orientation and functional structure of the eco-landscape concept planning were proposed. Key points of the planning were elaborated from 4 perspectives of spatial structure, traffic organization, spatial sequence and plant configuration to discuss spatial configuration of ecological landscapes on the fringes of Chengdu City, then further improve functions of ecological landscapes and quality of ecological environment, and put the concept planning into the construction practice of urban fringes.

Automatic abstraction of interference fringes with image technique

ion technique of interference fringes used in phase modulation and phase scanning modulation interferometer is presented. For the measurement of amplitudes of interference fringes, fringes are fitted and their central points are determined automatically according to their distribution rules. However, for the measurement of their phases, fringes should be recognized and processed with different calculating algorithms and least square optimization methods depending on the scanning modulation mode. When this technique is used for measurement of surface roughness, the measurement uncertainty is better than 5nm and the repeatability is less than 5%.

The Formation of Fringes of Equal Chromatic Order across Double Clad Fiber in the Presence of High Power Lasers

Multiple-beam fringes of equal chromatic order interferometry is a powerful technique to extract optical properties over a continuous range of spectrum. In this paper we develop a theory for the spectral shape of the fringes of equal chromatic order (FECO) that are formed across a double-clad fiber. The modified single term Sellmeier dispersion formula is used to construct the refractive index dispersion curves for the liquid, claddings, and core. Expressions for the paraxial optical path length for several rays passing through the fiber and the liquid are developed. The condition of bright fringe is applied to get an analytical expression for the spectral shape of the FECO across a double-clad fiber with an elliptical/circular inner cladding. A potential application of this theory is to determine the dispersion of Kerr constant of the claddings and the core of the fiber. To illustrate the theory and its application, simulation examples are provided and discussed.

Metropolitan Housing Development in Urban Fringe Areas-A Case Study of Three Metropolitan Cities of South Africa: Johannesburg, Ekurhuleni and Tshwane

Purpose:The metropolitan cities of Johannesburg,Ekurhuleni and Tshwane play an important role in the economy of the Gauteng province in South Africa.The region constitutes to 22.4 percent of the total population of South Africa and has a strong presence and contributes in areas of manufacturing sector,financial and business services,retail and wholesale trade,etc.The rapid urban population,increase in the informal settlements and socio-economic opportunities has resulted in considerable urban sprawl in and around the urban fringe areas of these metropolitan cities.The urban fringe areas of these metros often come under the influence of rapid urbanization process and pressures.Coupled with the economical and potential land dynamics and lack of priority of spatial development guidelines,these areas attract rapid and haphazard development from communities and developers.Research Design/Methodology:This research is based on a qualitative approach through a comprehensive literature review that included content analysis of key documents on housing sector such as IDPs(Integrated Development Plans),Municipal Annual Reports,Growth Development Strategies,and among other sectoral documents on housing sector.Some of the key priority issues considered in the housing sector included:eradication of housing backlogs,spatial restructuring of housing,provision of choice in terms of location,tenure and housing typology.Findings:The current paper discusses the approaches of metropolitan housing development processes in three metropolitan cities of South Africa from Gauteng region,namely:Johannesburg,Ekurhuleni and Tshwane.The paper discusses the existing housing sectoral scenario along with the fringe areas in three cities with focus on:formal and informal settlements,housing segregation and the backlogs,current institutional arrangements,role of public private participation,and scope for alternate mechanisms.The paper concludes in discussion on sustainable development options for housing development in urban fringe areas.

Projecting Distortion Calibration and Evaluation of Coding Fringes in Structured Light System

Coded structured light is an accurate, fast 3D measurement approach with high sampling density, of which the encoded fringes are distorted when projected to curved surface. Focused on the demand of encoding, decoding, multiview registration and system calibration, we expect to obtain undistorted fringes from camera image. Therefore, in this paper, we analyze the accuracy and sampling density of projecting distortion calibration approach based on control point and fitting surface. Moreover, combining the characteristic of coded structured light system, we design encoded fringe projecting distortion calibration scheme based on simplified encoded structured light model. Primarily, we neglect the minor parameters that affect the calibration in structured light model to reduce complexity. Then, we build the correspondence between camera image points and projector image points and achieve the calibration. Finally, we design evaluation scheme of projecting distortion calibration with parallelism and equal interval, and verify the effectiveness and accuracy of the approach through visual effect and experimental data.

A fringe jump counting method for the phase measurement in the HCN laser interferometer on EAST and its FPGA-based implementation

Electron density in fusion plasma is usually diagnosed using laser-aided interferometers. The phase difference signal obtained after phase demodulation is wrapped, which is also called a fringe jump. A method has been developed to unwrap the phase difference signal in real time using FPGA, specifically designed to handle fringe jumps in the hydrogen cyanide(HCN) laser interferometer on the EAST superconducting tokamak. This method is designed for a phase demodulator using the fast Fourier transform(FFT) method at the front end. The method is better adapted for hardware implementation compared to complex mathematical analysis algorithms, such as field programmable gate array(FPGA). It has been applied to process the phase measurement results of the HCN laser interferometer on EAST in real time. Electron density results show good confidence in the fringe jump unwrapping method. Further possible application in other laser interferometers, such as the POlarimeter-INTerferometer(POINT)system on EAST tokamak is also discussed.

Exploring Capillary Fringe Flow:Quasilinear Modeling with Kirchhoff Transforms and Gardner Model

Recent studies have underscored the significance of the capillary fringe in hydrological and biochemical processes.Moreover,its role in shallow waters is expected to be considerable.Traditionally,the study of groundwater flow has centered on unsaturated-saturated zones,often overlooking the impact of the capillary fringe.In this study,we introduce a steady-state two-dimensional model that integrates the capillary fringe into a 2-D numerical solution.Our novel approach employs the potential form of the Richards equation,facilitating the determination of boundaries,pressures,and velocities across different ground surface zones.We utilized a two-dimensional Freefem++finite element model to compute the stationary solution.The validation of the model was conducted using experimental data.We employed the OFAT(One_Factor-At-Time)method to identify the most sensitive soil parameters and understand how changes in these parameters may affect the behavior and water dynamics of the capillary fringe.The results emphasize the role of hydraulic conductivity as a key parameter influencing capillary fringe shape and dynamics.Velocity values within the capillary fringe suggest the prevalence of horizontal flow.By variation of the water table level and the incoming flow q0,we have shown the correlation between water table elevation and the upper limit of the capillary fringe.

Physics-informed deep learning for fringe pattern analysis

Recently,deep learning has yielded transformative success across optics and photonics,especially in optical metrology.Deep neural networks (DNNs) with a fully convolutional architecture (e.g.,U-Net and its derivatives) have been widely implemented in an end-to-end manner to accomplish various optical metrology tasks,such as fringe denoising,phase unwrapping,and fringe analysis.However,the task of training a DNN to accurately identify an image-to-image transform from massive input and output data pairs seems at best naive,as the physical laws governing the image formation or other domain expertise pertaining to the measurement have not yet been fully exploited in current deep learning practice.To this end,we introduce a physics-informed deep learning method for fringe pattern analysis (PI-FPA) to overcome this limit by integrating a lightweight DNN with a learning-enhanced Fourier transform profilometry (Le FTP) module.By parameterizing conventional phase retrieval methods,the Le FTP module embeds the prior knowledge in the network structure and the loss function to directly provide reliable phase results for new types of samples,while circumventing the requirement of collecting a large amount of high-quality data in supervised learning methods.Guided by the initial phase from Le FTP,the phase recovery ability of the lightweight DNN is enhanced to further improve the phase accuracy at a low computational cost compared with existing end-to-end networks.Experimental results demonstrate that PI-FPA enables more accurate and computationally efficient single-shot phase retrieval,exhibiting its excellent generalization to various unseen objects during training.The proposed PI-FPA presents that challenging issues in optical metrology can be potentially overcome through the synergy of physics-priors-based traditional tools and data-driven learning approaches,opening new avenues to achieve fast and accurate single-shot 3D imaging.

Fringe家族基因在癌症中作用的研究进展

Fringe家族基因由疯狂边缘基因(LFNG)、躁狂边缘基因(MFNG)和激进边缘基因(RFNG)组成。Fringe家族基因编码的蛋白可修饰Notch受体来调控Notch信号通路,从而发挥调节细胞增殖、分化和凋亡等生物学功能。Genecards数据库分析了Fringe家族基因的染色体位置及生物学功能等。UCSCXenaShiny数据库整合癌症细胞系百科全书(CCLE)、癌症基因组图谱(TCGA)和基因型-组织表达(GTEx)数据分析了Fringe家族基因在泛癌细胞系、TCGA肿瘤组织和相对应的GTEx正常组织中的差异表达与预后价值。本文就Fringe家族基因在癌症中的作用作一综述。

Human Settlements in Rural-urban Fringe

On basis of human settlements theory, the research explored status quo of human settlements theory in rural-urban fringe, and analyzed and concluded predicaments confronted by rural-urban fringe, laying foundation for human settle- ments theory of rural-urban fringe.

Spatial Boundary Definition of Urban-rural Fringe in Beijing City

Through reviewing domestic and overseas literatures about the definition of urban-rural fringe,it can be found that the combination of qualitative and quantitative definition methods has become a dominant one.This paper makes out the principle and basis,uses the data of villages and towns,and establishes an index system from three angles:population,land use and landscape.And then the gravitational model is applied to define the urban-rural fringe with Beijing as an example.

Analyzing land use characteristics of rural settlements on the urban fringe of Liangjiang New Area, Chongqing, China

The objective of this paper is to analyze land use characteristics of rural settlements in urban fringe so as to provide references for optimizing the regional distribution of rural settlements, consolidating rural settlements, and coordinating urban-rural integrated development. The methods of spatial statistical analysis, buffer analysis, Ripley's K function, kernel density analysis based on GIS(Geographic Information System) were used to analyze the characteristics of scale, spatial differentiation and spatial patterns of the rural settlements in Liangjiang New Area in Chongqing Municipality of China. The fractal dimension formula was also developed to reflect fractal feature of the rural settlements. The results show that, the scale of rural settlements in Liangjang New Area takes on distinct characteristics of spatial differentiation along with changes in elevation, gradient, location, geohazards distribution, and the like. The fractal characteristic of rural settlements has obvious regional variations subject to the 6 factors of location in the Liangjiang New Area. Overall, the worse the terrain conditions are, the larger the fractal dimension values become. The better the locationconditions, the larger the fractal dimension values are. The spatial pattern in the township scale presents three kinds of distribution as being aggregated, uniform and random. In contract, the spatial pattern in the plaque scale displays a banding distribution from a general view with several aggregation zones centering on each town center. From the results, we can see that the characteristics of rural settlements in urban fringe are more complicated. For such kind of rural settlements in special regions, in the rural land consolidation more attention should be paid to improve the rural living environments and public services, as well as to promote the harmonious relationship between the urban and rural areas.

Research and development of fringe projection-based methods in 3D shape reconstruction

This paper discusses current research and development of fringe projection-based techniques. A system based on Fourier transform profilometry (FTP) is proposed for three-dimensional (3D) shape recovery. The system improves the method of phase unwrapping to gain accurate 3D shapes of objects. The method uses a region-growing algorithm for the path prediction guided by the quality map to increase the recovering accuracy and provides a fast and simple tool for 3D shape recovery. The shape measurement and data recovery are integrated to offer a new method of 3D modelling. Examples are presented to verify the feasibility of the proposed method.

Deep-learning-enabled dual-frequency composite fringe projection profilometry for single-shot absolute 3D shape measurement

Single-shot high-speed 3D imaging is important for reconstructions of dynamic objects.For fringe projection profilometry(FPP),however,it is still challenging to recover accurate 3D shapes of isolated objects by a single fringe image.In this paper,we demonstrate that the deep neural networks can be trained to directly recover the absolute phase from a unique fringe image that involves spatially multiplexed fringe patterns of different frequencies.The extracted phase is free from spectrum-aliasing problem which is hard to avoid for traditional spatial-multiplexing methods.Experiments on both static and dynamic scenes show that the proposed approach is robust to object motion and can obtain high-quality 3D reconstructions of isolated objects within a single fringe image.

A convenient look-up-table based method for the compensation of non-linear error in digital fringe projection

Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this work, we propose a convenient look-up-table-based （LUT-based） method to compensate for the non-linear error in captured fringe patterns. Without extra calibration, this LUT-based method completely utilizes the captured fringe pattern by recording the full-field differences. Then, a phase compensation map is established to revise the measured phase. Experimental results demonstrate that this method works effectively.

Changing Spatial and Structural Patterns of Non-agricultural Activities in Outward-moving Beijing Urban Fringe

As responses to metropolitan suburbanization and rural urbanization,the formation and evolution of urban fringes should be understood against the background of overall economic development and spatial reconstruction of entire metropolises.At the same time,however,endogenous interactions between industrial structure and spatial patterns of non-agricultural activities are also worthy of scholarly attention.Since the 1980s,studies on urban fringes in China have been restricted by the lack of micro-level data.This paper investigates the spatial expansion and structural evolution of the urban fringe by taking the case of Beijing and uses systematic firm-level data in 1996 and 2001 from the National Census of Basic Units.The diversity of distribution patterns across industrial sectors brings about two interrelated results.On the one hand,structural adjustment of non-agricultural industries promotes the expansion and spatial evolution of the urban fringe.On the other hand,the stability and dynamics of industrial structure coexist in the moving urban fringe.This study also reveals that the outward-moving urban fringe is the optimal location for manufacturing,especially heavy manufacturing,as well as traditional producer and consumer services.However,industries with spatial stickiness such as tourism and sports have not moved with the fringe.Most advanced services remain concentrated in the city center.The authors argue that it is essential for understanding and managing urban fringes to take into account spatial evolution and industrial structural adjustment together with their interaction with each other.

产高醋酸菌的筛选及小型Frings醋酸发酵实验

要生产高浓度醋 ,应筛选出耐高酸的菌株 ,本文介绍一种从酿造食醋中筛选高酸菌株的方法 ,并对其进行小型Frings罐的液态深层发酵实验。

Carrier fringe method of moire interferometry for tiny strain measurements in micro-field

In this paper, we demonstrate a new optical method for tiny strain measurements based on the principle of carrier fringes of moire interferometry. A cross-line grating with frequency of 1200 lp/mm is replicated on the specimen surface, and the strain can be deduced from the changes in carrier fringes before and after the deformation of an object. Four coherent laser beams are used to obtain the carrier fringe patterns of field U and V. Both theoretical analysis and numerical simulation indicate that the ideal accuracy of strain can be controlled within a range of ±1με. Case study of a plane extension experiment shows that the measurement accuracy of strain can be controlled within the range of ±10με. The average strain values of every row of field U and every column of field V can be obtained by using this method, and approximated strain of every pixel in the whole-field can be further acquired, and thus it is possible to measure tiny strains occurred in a micro-field. The technology in this paper can provide comprehensive information for analyzing related mechanical content in the field of MEMS.