Based on split plot design method of field test,the impacts of supplemental irrigation based on soil moisture measurement and nitrogen use on winter wheat yield and nitrogen absorption and distribution were studied.Su...Based on split plot design method of field test,the impacts of supplemental irrigation based on soil moisture measurement and nitrogen use on winter wheat yield and nitrogen absorption and distribution were studied.Supplemental irrigation had three levels: 60%(W_1),70%(W_2) and 80%(W3) of the targeted relative water content at 0-40 cm of soil layer during jointing period of winter wheat.Nitrogen fertilization had three levels: not using nitrogen(N_0),using pure nitrogen of 195 kg/hm^2(N_(195)) and 255 kg/hm^2(N_(255)).Results showed that:(i)different supplemental irrigation and nitrogen fertilization significantly affected plant height and leaf area of winter wheat during key growth period.Under the same supplemental irrigation treatment,both plant height and leaf area of winter wheat showed as N_(255)> N_(195)> N_0(P <0.05).Plant height in N_(195) and N_(255)treatments was significantly higher than that in N_0 treatment,but there was not significant difference between N_(195) and N_(255)(P >0.05).Under the same nitrogen fertilization,plant height in W_2(569.4 m^3/hm^2) and W3(873.45 m^3/hm^2) treatments was significant higher than that in W_1(265.2 m^3/hm^2),but there was not significant difference between W_2 and W3(P >0.05).It illustrated that excessive nitrogen fertilization and supplemental irrigation did not significantly affect plant height and leaf area of winter wheat.(ii) Under the same nitrogen fertilization level,yield increase effect of winter wheat by supplemental irrigation showed a declining trend with nitrogen application amount increased.It illustrated that nitrogen fertilization and supplemental irrigation had certain critical values on the yield of winter wheat.When surpassing the critical value,the yield declined.When nitrogen fertilization amount was 195 kg/hm^2,and supplemental irrigation amount was 70% of field moisture capacity(569.4 m^3/hm^2),the highest yield 8500 kg/hm^2 could be obtained.(iii) During mature period of winter wheat,nitrogen accumulation amount of plant treated by nitrogen was significantly higher than that not treated by nitrogen(P <0.05).But under the treatments of W_2 and W3,nitrogen accumulation amount in N_(255) significantly declined when compared with N_(195)(P <0.05).Especially under W3(873.45 m^3/hm^2) level,nitrogen accumulation amount in N_(255) was even lower than N_0.Under the treatments of N_0 and N_(195),nitrogen accumulation amount of plant significantly increased with supplemental irrigation increased(P < 0.05).But under N_(255) treatment,there was not significant difference(P > 0.05).It illustrated that moderate supplemental irrigation and nitrogen fertilization could improve nitrogen absorption ability of winter wheat,but excessive supplemental irrigation and nitrogen fertilization were not favorable for plant's nitrogen absorption.(iv) Although the increase of supplemental irrigation during jointing period improved nitrogen absorption ability of winter wheat and promoted winter wheat absorbing more nitrogen,it inhibited nitrogen transferring and distributing to seed.Comprehensively considering growth condition of winter wheat and nitrogen risk condition,it is suggested that nitrogen application amount was 195 kg/hm^2,and supplemental irrigation reached 70% of field moisture capacity(569.4 m^3/hm^2),which could be as the suitable water and fertilizer use amounts in the region.展开更多
As an alternative to conventional encapsulation concepts for a double glass photovoltaic(PV)module,we introduce an innovative ionomer-based multi-layer encapsulant,by which the application of additional edge sealing t...As an alternative to conventional encapsulation concepts for a double glass photovoltaic(PV)module,we introduce an innovative ionomer-based multi-layer encapsulant,by which the application of additional edge sealing to prevent moisture penetration is not required.The spontaneous moisture absorption and desorption of this encapsulant and its raw materials,poly(ethylene-co-acrylic acid)and an ionomer,are analyzed under different climatic conditions in this work.The relative air humidity is thermodynamically the driving force for these inverse processes and determines the corresponding equilibrium moisture content(EMC).Higher air humidity results in a larger EMC.The homogenization of the absorbed water molecules is a diffusion-controlled process,in which temperature plays a dominant role.Nevertheless,the diffusion coefficient at a higher temperature is still relatively low.Hence,under normal climatic conditions for the application of PV modules,we believe that the investigated ionomer-based encapsulant can“breathe”the humidity:During the day,when there is higher relative humidity,it“inhales”(absorbs)moisture and restrains it within the outer edge of the module;then at night,when there is a lower relative humidity,it“exhales”(desorbs)the moisture.In this way,the encapsulant protects the cell from moisture ingress.展开更多
The Lop Nur dry salt lake,Xinjiang province,is charactered by typical physiognomy salt-crust,located in39.6-41.3N.latitude and 89.6-91.4E.longitude.The thickness of salt-crust is about from 20 cm to 100 cm,and
We have been studying the function and structure of fatty acid-containing extracellular polysaccharides (FACEPS) produced by bacteria belonging to the genus Rhodococcus. In this study, we examined the relationships be...We have been studying the function and structure of fatty acid-containing extracellular polysaccharides (FACEPS) produced by bacteria belonging to the genus Rhodococcus. In this study, we examined the relationships between the structure and emulsifying, thickening, moisture-absorption, and moisture-retention capabilities of rhodococcal FACEPS using S-2 EPS produced by R. rhodochrous strain S-2. We prepared chemically deacylated S-2 EPS (DeAcyl S-2 EPS) and palmitoylated DeAcyl S-2 EPS (ReAcyl S-2 EPS), and compared them with native S-2 EPS. All of the properties were attenuated and recovered by deacylation and reacylation of S-2 EPS, respectively. These results suggest that the fatty acid moiety of rhodococcal FACEPS is involved in such functional properties. We also showed that palmitoylation improved the emulsifying, moisture-ab-sorption, and moisture-retention abilities of other acidic polysaccharides that are commercially available. These results suggest that the acidity of the polysaccharide backbone is at least partly responsible for the observed functionality of fatty acid-containing polysaccharides. To our knowledge, this is the first report on multifunctional property of an anionic polymer incorporating low amounts of hydrophobic residues. The present findings could be useful for the creation of new multifunctional surfactants from renewable raw materials for use in various industries, e.g., in cosmetics.展开更多
In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture abso...In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture absorption, and moisture retention abilities. In this study, we synthesized alkyl esterified poly-γ-glutamic acid (PGA) with various chain lengths and degrees of substitution of the alkyl moieties to examine how hydrophobic groups incorporated in the anionic polymer contribute to enhanced emulsification, moisture absorption, and moisture retention. With a low degree of alkylation of PGA, these abilities were drastically improved. To improve the moisture absorption of PGA, alkylation with a short chain length is effective in forming interspaces between PGA chains to trap water molecules. Hydrophobic-hydrophilic balance may also be important to improve the emulsification and moisture retention abilities of PGA alkylates. To the best of our knowledge, this is the first report of the relationship between the structure and the multifunctional abilities of an anionic polymer incorporated with a small amount of hydrophobic residue. PGA alkylates, as well as fatty acid-containing polysaccharides, have potential use as multifunctional surfactants throughout various industries.展开更多
Composite materials are lightweight structures and have been wildly used in marine applications.A carbon composite structure usually absorbs moisture while in-service,which can significantly affect its properties,and ...Composite materials are lightweight structures and have been wildly used in marine applications.A carbon composite structure usually absorbs moisture while in-service,which can significantly affect its properties,and detriments the overall performance.We perform a detailed study on moisture absorption and diffusion of a carbon fibre reinforced vinyl ester resin composite system.Composite samples are immersed directly in four different solutions at a temperature of 37±0.5℃for 1444h.The moisture diffusion is analysed through the Fickian diffusion model;the diffusion parameters are subsequently determined from the gravimetric data.The moisture absorption and interaction with the composite constituents are then discussed.These indicate the fundamentals of the moisture absorption and diffusion within the carbon composite structure.展开更多
The paper analyses the effect of stitch geometrical modality changing after moisture absorption on the porosity of knitted fabrics,and educes the formulas between porosity and stitch parameters.Regarding as the cell s...The paper analyses the effect of stitch geometrical modality changing after moisture absorption on the porosity of knitted fabrics,and educes the formulas between porosity and stitch parameters.Regarding as the cell stitch,the increasing of yarn diameter brings the porosity decreasing and the fabric shrinking in the wale direction.While the diameter keeps invariability,the yarn elongating brings the fabric humping up as well as the increasing porosity.The air-permeability experiments have been conducted to validate the theoretical analysis,and there is reasonable agreement between the theories and experiments.展开更多
An important property of moisture absorption and sweat discharge yarns is their water transport property. In the paper, two water transport models of moisture absorption and sweat discharge yarns were developed to inv...An important property of moisture absorption and sweat discharge yarns is their water transport property. In the paper, two water transport models of moisture absorption and sweat discharge yarns were developed to investigate the influence factors on their wicking rate. In parallel Column Pores Model, wicking rate is determined by the equivalent capillary radius R and length of the capillary tube L. In Pellets Accumulation Model, wicking rate is decided by the capillary radius r and length of the fiber unit assemble L0.展开更多
This study aimed to investigate the water absorption capacity of thermally modified and non-modified spruce and blue-stained spruce wood.The wettability of wood depends on various factors,including its type,density,po...This study aimed to investigate the water absorption capacity of thermally modified and non-modified spruce and blue-stained spruce wood.The wettability of wood depends on various factors,including its type,density,porosity,and surface treatment.Wood can swell and become distorted when exposed to water or humidity,impacting its structural integrity.Hence,it is crucial to consider the water and water vapour uptake in the wood when choosing materials for applications that are likely to be exposed to moisture.Various moisture absorption tests were conducted to assess water absorption capacity,including short-term and long-term water absorption and water vapour absorption.The results showed a significant difference in the long-term exposure to water,which was related to the density of the wood.The study examined the influence of thermal treatment on the physical properties of wood and observed significant variations in mass change due to coating,indicating differences in adhesion among different wood types.Vacuum-treated blue-stained Norway spruce demonstrated higher adhesion(5%–15%)compared to air-treated samples.Furthermore,cohesion tests revealed lower cohesion force in blue-stained Norway spruce(approximately 20%–30%)compared to Norway spruce.The study also used industry-standard tests to investigate the adhesion and cohesion of nano-coatings on wood surfaces.The results provided valuable information on the properties of coatings applied to wood,which is vital in protecting and decorating wood while also providing preventive protection against wood pests,weathering,and mechanical influences.Wood modification in vacuum involves subjecting the wood to a low-pressure environment to remove air and moisture,allowing for deeper and more uniform penetration of treatment chemicals.In contrast,wood modification in air relies on the natural circulation of air to facilitate the absorption of chemical treatments,without the need for a vacuum chamber.展开更多
基金Supported by National Key Research Plan Project(2016YFD0801001,2016YFD0200103,2017YFD0800500)
文摘Based on split plot design method of field test,the impacts of supplemental irrigation based on soil moisture measurement and nitrogen use on winter wheat yield and nitrogen absorption and distribution were studied.Supplemental irrigation had three levels: 60%(W_1),70%(W_2) and 80%(W3) of the targeted relative water content at 0-40 cm of soil layer during jointing period of winter wheat.Nitrogen fertilization had three levels: not using nitrogen(N_0),using pure nitrogen of 195 kg/hm^2(N_(195)) and 255 kg/hm^2(N_(255)).Results showed that:(i)different supplemental irrigation and nitrogen fertilization significantly affected plant height and leaf area of winter wheat during key growth period.Under the same supplemental irrigation treatment,both plant height and leaf area of winter wheat showed as N_(255)> N_(195)> N_0(P <0.05).Plant height in N_(195) and N_(255)treatments was significantly higher than that in N_0 treatment,but there was not significant difference between N_(195) and N_(255)(P >0.05).Under the same nitrogen fertilization,plant height in W_2(569.4 m^3/hm^2) and W3(873.45 m^3/hm^2) treatments was significant higher than that in W_1(265.2 m^3/hm^2),but there was not significant difference between W_2 and W3(P >0.05).It illustrated that excessive nitrogen fertilization and supplemental irrigation did not significantly affect plant height and leaf area of winter wheat.(ii) Under the same nitrogen fertilization level,yield increase effect of winter wheat by supplemental irrigation showed a declining trend with nitrogen application amount increased.It illustrated that nitrogen fertilization and supplemental irrigation had certain critical values on the yield of winter wheat.When surpassing the critical value,the yield declined.When nitrogen fertilization amount was 195 kg/hm^2,and supplemental irrigation amount was 70% of field moisture capacity(569.4 m^3/hm^2),the highest yield 8500 kg/hm^2 could be obtained.(iii) During mature period of winter wheat,nitrogen accumulation amount of plant treated by nitrogen was significantly higher than that not treated by nitrogen(P <0.05).But under the treatments of W_2 and W3,nitrogen accumulation amount in N_(255) significantly declined when compared with N_(195)(P <0.05).Especially under W3(873.45 m^3/hm^2) level,nitrogen accumulation amount in N_(255) was even lower than N_0.Under the treatments of N_0 and N_(195),nitrogen accumulation amount of plant significantly increased with supplemental irrigation increased(P < 0.05).But under N_(255) treatment,there was not significant difference(P > 0.05).It illustrated that moderate supplemental irrigation and nitrogen fertilization could improve nitrogen absorption ability of winter wheat,but excessive supplemental irrigation and nitrogen fertilization were not favorable for plant's nitrogen absorption.(iv) Although the increase of supplemental irrigation during jointing period improved nitrogen absorption ability of winter wheat and promoted winter wheat absorbing more nitrogen,it inhibited nitrogen transferring and distributing to seed.Comprehensively considering growth condition of winter wheat and nitrogen risk condition,it is suggested that nitrogen application amount was 195 kg/hm^2,and supplemental irrigation reached 70% of field moisture capacity(569.4 m^3/hm^2),which could be as the suitable water and fertilizer use amounts in the region.
文摘As an alternative to conventional encapsulation concepts for a double glass photovoltaic(PV)module,we introduce an innovative ionomer-based multi-layer encapsulant,by which the application of additional edge sealing to prevent moisture penetration is not required.The spontaneous moisture absorption and desorption of this encapsulant and its raw materials,poly(ethylene-co-acrylic acid)and an ionomer,are analyzed under different climatic conditions in this work.The relative air humidity is thermodynamically the driving force for these inverse processes and determines the corresponding equilibrium moisture content(EMC).Higher air humidity results in a larger EMC.The homogenization of the absorbed water molecules is a diffusion-controlled process,in which temperature plays a dominant role.Nevertheless,the diffusion coefficient at a higher temperature is still relatively low.Hence,under normal climatic conditions for the application of PV modules,we believe that the investigated ionomer-based encapsulant can“breathe”the humidity:During the day,when there is higher relative humidity,it“inhales”(absorbs)moisture and restrains it within the outer edge of the module;then at night,when there is a lower relative humidity,it“exhales”(desorbs)the moisture.In this way,the encapsulant protects the cell from moisture ingress.
文摘The Lop Nur dry salt lake,Xinjiang province,is charactered by typical physiognomy salt-crust,located in39.6-41.3N.latitude and 89.6-91.4E.longitude.The thickness of salt-crust is about from 20 cm to 100 cm,and
文摘We have been studying the function and structure of fatty acid-containing extracellular polysaccharides (FACEPS) produced by bacteria belonging to the genus Rhodococcus. In this study, we examined the relationships between the structure and emulsifying, thickening, moisture-absorption, and moisture-retention capabilities of rhodococcal FACEPS using S-2 EPS produced by R. rhodochrous strain S-2. We prepared chemically deacylated S-2 EPS (DeAcyl S-2 EPS) and palmitoylated DeAcyl S-2 EPS (ReAcyl S-2 EPS), and compared them with native S-2 EPS. All of the properties were attenuated and recovered by deacylation and reacylation of S-2 EPS, respectively. These results suggest that the fatty acid moiety of rhodococcal FACEPS is involved in such functional properties. We also showed that palmitoylation improved the emulsifying, moisture-ab-sorption, and moisture-retention abilities of other acidic polysaccharides that are commercially available. These results suggest that the acidity of the polysaccharide backbone is at least partly responsible for the observed functionality of fatty acid-containing polysaccharides. To our knowledge, this is the first report on multifunctional property of an anionic polymer incorporating low amounts of hydrophobic residues. The present findings could be useful for the creation of new multifunctional surfactants from renewable raw materials for use in various industries, e.g., in cosmetics.
文摘In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture absorption, and moisture retention abilities. In this study, we synthesized alkyl esterified poly-γ-glutamic acid (PGA) with various chain lengths and degrees of substitution of the alkyl moieties to examine how hydrophobic groups incorporated in the anionic polymer contribute to enhanced emulsification, moisture absorption, and moisture retention. With a low degree of alkylation of PGA, these abilities were drastically improved. To improve the moisture absorption of PGA, alkylation with a short chain length is effective in forming interspaces between PGA chains to trap water molecules. Hydrophobic-hydrophilic balance may also be important to improve the emulsification and moisture retention abilities of PGA alkylates. To the best of our knowledge, this is the first report of the relationship between the structure and the multifunctional abilities of an anionic polymer incorporated with a small amount of hydrophobic residue. PGA alkylates, as well as fatty acid-containing polysaccharides, have potential use as multifunctional surfactants throughout various industries.
基金The author would like to acknowledge the Fuzhou University for providing the start-up research funding for Minjiang Scholar Distinguished Professor scheme in Fujian Province,China.Financial support from the National Natural Science Foundation of China(52005108)is also appreciated.
文摘Composite materials are lightweight structures and have been wildly used in marine applications.A carbon composite structure usually absorbs moisture while in-service,which can significantly affect its properties,and detriments the overall performance.We perform a detailed study on moisture absorption and diffusion of a carbon fibre reinforced vinyl ester resin composite system.Composite samples are immersed directly in four different solutions at a temperature of 37±0.5℃for 1444h.The moisture diffusion is analysed through the Fickian diffusion model;the diffusion parameters are subsequently determined from the gravimetric data.The moisture absorption and interaction with the composite constituents are then discussed.These indicate the fundamentals of the moisture absorption and diffusion within the carbon composite structure.
文摘The paper analyses the effect of stitch geometrical modality changing after moisture absorption on the porosity of knitted fabrics,and educes the formulas between porosity and stitch parameters.Regarding as the cell stitch,the increasing of yarn diameter brings the porosity decreasing and the fabric shrinking in the wale direction.While the diameter keeps invariability,the yarn elongating brings the fabric humping up as well as the increasing porosity.The air-permeability experiments have been conducted to validate the theoretical analysis,and there is reasonable agreement between the theories and experiments.
基金Supported by National Nature Science Fund ( No.50643014)"Yangtze Scholar and Innovation Team Development Plan"Innovation Team(No.IRT0654)Science Research Fund of Zhejiang Sci-Tech University (No.0601065-Y)
文摘An important property of moisture absorption and sweat discharge yarns is their water transport property. In the paper, two water transport models of moisture absorption and sweat discharge yarns were developed to investigate the influence factors on their wicking rate. In parallel Column Pores Model, wicking rate is determined by the equivalent capillary radius R and length of the capillary tube L. In Pellets Accumulation Model, wicking rate is decided by the capillary radius r and length of the fiber unit assemble L0.
文摘This study aimed to investigate the water absorption capacity of thermally modified and non-modified spruce and blue-stained spruce wood.The wettability of wood depends on various factors,including its type,density,porosity,and surface treatment.Wood can swell and become distorted when exposed to water or humidity,impacting its structural integrity.Hence,it is crucial to consider the water and water vapour uptake in the wood when choosing materials for applications that are likely to be exposed to moisture.Various moisture absorption tests were conducted to assess water absorption capacity,including short-term and long-term water absorption and water vapour absorption.The results showed a significant difference in the long-term exposure to water,which was related to the density of the wood.The study examined the influence of thermal treatment on the physical properties of wood and observed significant variations in mass change due to coating,indicating differences in adhesion among different wood types.Vacuum-treated blue-stained Norway spruce demonstrated higher adhesion(5%–15%)compared to air-treated samples.Furthermore,cohesion tests revealed lower cohesion force in blue-stained Norway spruce(approximately 20%–30%)compared to Norway spruce.The study also used industry-standard tests to investigate the adhesion and cohesion of nano-coatings on wood surfaces.The results provided valuable information on the properties of coatings applied to wood,which is vital in protecting and decorating wood while also providing preventive protection against wood pests,weathering,and mechanical influences.Wood modification in vacuum involves subjecting the wood to a low-pressure environment to remove air and moisture,allowing for deeper and more uniform penetration of treatment chemicals.In contrast,wood modification in air relies on the natural circulation of air to facilitate the absorption of chemical treatments,without the need for a vacuum chamber.