Study on Effects of Curing Process on Characteristics of Marinated Beef Products

[Objectives]This study was conducted to compare the effects of different curing processes on the characteristics of marinated beef.[Methods]Marinated beef was obtained by two curing processes:static curing and injection and vacuum tumbling curing.The effects of the two curing processes on the production rate,curing absorption rate,water content,soluble protein content,amino acid nitrogen content,texture characteristics and microstructure of the product were compared.[Results]Compared with static curing,the production rate of marinated beef increased by 10%,the curing absorption rate increased by 28%,the texture and microstructure were improved,and the water content increased,while the soluble protein content decreased.As a result,the sensory score was higher.There was no significant difference in the content of amino acid nitrogen,but it decreased compared with raw meat.To sum up,injection and vacuum tumbling curing is more conducive to the processing of marinated beef.[Conclusions]This study provides a theoretical basis for the industrial production of marinated beef,and lays a foundation for in-depth exploration of injection and vacuum tumbling curing technique of marinated beef.

Rubber Curing Process Simulation Based on Parabola Model

The curing process of rubber fender was investigated. A parabola model was put forward for the first time, which described variation of rubber thermal properties such as heat conduction and specific heat. Based on Kamal and Sourour model, a modified Rafei kinetic model was used to predict the rubber curing kinetics. To compare with experimental data, the fender curing process was simulated by parabola model and linear model respectively. Additionally, the curing craft and structure of the fender were modified and evaluated based on finite element analysis （FEA）. As a result, the curing uniformity and efficiency of the fender was highly improved. It was investigated that, the parabola model correlated the rubber thermal behavior more precisely. The numerical prediction was in good agreement with the experimental evaluation.

Early Hydration and Setting Process of Fly Ash-blended Cement Paste under Different Curing Temperatures

A specially developed ultrasonic measurement apparatus (UMA) was used to in situ monitor the setting process of fly ash blended cement paste. Combined with the results of Vicat Needle tests, isothermal calorimetric measurement, XRD analysis, SEM morphology and compressive test, the influence of curing temperature (20, 40, 60, and 90 ℃) and fly ash content (0,10%, 20% and 30%) on the setting and hydration process of fly ash blended cement paste was analyzed. The results show that setting and hardening process of fly ash blended cement paste at elevated temperature can be clearly identified into three stages including dormant stage, acceleration stage and deceleration stage. The increasing of curing temperature greatly accelerates the setting and hardening process. However, the content of fly ash does not have significant effect on the setting in condition of 90 ℃. Besides, the initial and final setting time of cement paste is correspondent with the time of duration of dormant stage and the time of UPV value is 1500 m/s (T1500), respectively. Thus, the UMA can be used to determine the initial and final setting time of cementitious material under different curing temperatures. The compressive test results indicate that the paste with 20% fly ash presents higher compressive strength than the plain paste at curing temperatures of 90 ℃. Therefore, appropriate amount of fly ash is beneficial for concrete in the high temperature curing conditions.

Study on preparation of fast curing novolaks for the shell process

To save energy and raise molding and coremaking productivity, the synthetic procedure of novolaks for the shell process was investigated. The study indicated that it was difficult to obtain fast curing novolaks under strongly acidic conditions alone. A novel synthetic procedure was proposed for preparing novolaks in a two-step manner, a divalent metal salt catalyzed novolak preparation followed by a strong acid catalyzed novolak preparation. The optimum conditions for the two-step procedure were determined by orthogonal experiment design. The results showed that it was easy to prepare fast curing novolaks with cure time in the range of 20 s to 30 s and softening point in the range of 80℃ to 90℃ under complex catalysis conditions.

Hot Mixing Behavior and Curing Process of Epoxy Asphalt

A new hot mixed epoxy asphalt system was developed. The reaction process of epoxy resin was characterized by Fourier transform infrared spectroscopy (FTIR). The viscosity was investigated by Brinell viscometer when epoxy resin was mixed with asphalt. The glass transition temperature (Tg), homogeneity, thermal stability and viscoelasticity of epoxy asphalt were analyzed by differential scanning calorimetry (DSC), metallographic microscope, thermogravimetric (TG) and dynamic mechanical analysis (DMA). The results showed that the viscosity of epoxy resin modified asphalt reached 1000 mPa·s for more than 180 minutes at 180 ℃, while the best construction process is mixing at 180 ℃ for 2 hours and curing at 60 ℃ for 4 days. The particle size of asphalt is less than 50 μm. In addition, the mechanical properties of the materials are uniform within the specified pavement thickness.

Synthetic Process of Bio-Based Phenol Formaldehyde Adhesive Derived from Demethylated Wheat Straw Alkali Lignin and Its Curing Behavior

Lignin is a natural biopolymer with a complex three-dimensional network, commercially obtained from wasteliquid of paper pulp and bioethanol production, and could be a candidate for preparation of environment-friendlybio-based polyphenol material. In the present work, the demethylated wheat straw alkali lignin (D-Lig), preparedby demethylation of wheat straw alkali lignin (Lig) using an in-situ generated Lewis acid, was used to synthesizebio-based phenol formaldehyde resin adhesive (D-LPF) applied in plywood. Effects of synthetic process’s factors,including lignin substitution for phenol, NaOH concentration and molar ratio of formaldehyde to phenol, on thebonding strength and free formaldehyde content of D-LPF were investigated in detail, and the optimum syntheticprocess of D-LPF was obtained as following: Lignin substitution for phenol 60%, NaOH concentration 5.0% andmolar ratio of formaldehyde to phenol 2.0, and under the optimum reaction condition, the D-LPF presented lower free formaldehyde content (0.18%) and higher bonding strength (2.19 MPa), which was better than those ofcontaining-lignin phenol formaldehyde resin adhesive (LPF). Additionally, the curing behavior of the adhesivewas studied by differential scanning calorimetry (DSC) combined with gel time. It can be obtained that D-LPFresin adhesive had the shortest gel time, and fastest curing rate, compared with those of PF and L-PF resin adhesives. The curing kinetics data was fitted well by Kissinger model using non-isothermal DSC method, and theaverage activation energy value was 85.3 kJ/mol, slightly higher than that of commercial PF resin, while lowerthan that of LPF (90.2 kJ/mol). Finally, based on the analytical results of high temperature fourier transform infrared spectroscopy (FTIR), a possible curing mechanism of D-LPF was proposed.

Integrated Design of D.D.I., Filament Winding and Curing Processes for Manufacturing the High Pressure Vessel(Type Ⅱ)

As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehicles.Because of the limited space available for the car,the composite pressure vessel(TypeⅡ)has been applied to the CNG vehicles to reach large capacity and weight lightening vehicles.High pressure vessel(TypeⅡ)is composed of a composite layer and a metal liner.The metal liner is formed by the deep drawing and ironing(D.D.I.)process,which is a complex process of deep drawing and ironing.The cylinder part is reinforced by composite layer wrapped through the filament winding process and is bonded to the liner by the curing process.In this study,an integrated design method was presented by establishing the techniques for FE analysis of entire processes(D.D.I.,filament winding and curing processes)to manufacture the CNG composite pressure vessel(TypeⅡ).Dimensions of the dies and the punches of the 1 st(cup drawing),2 nd(redrawing-ironing 1-ironing 2)and 3 rd(redrawing-ironing)stages were calculated theoretically,and shape of tractrix die to be satisfied with the minimum forming load was suggested for life improvement and manufacturing costs in the D.D.I.process.Thickness of the composite material was determined in the filament winding process,finally,conditions of the curing process(number of heating stage,curing temperature,heating rate and time)were proposed to reinforce adhesive strength between the composite layers.

CURING PROCESS OF PHOTOPOLYMER RESIN BOND DIAMOND TOOLS

Analytical simulation and corresponding proof-test are adopted to study the principle of the curing process of photopolymer resin diamond tools. The influence of the diamond as abrasives in photopolymer resin owing to the absorptivity of the diamond for the UV light on the photopolymer resin curing process is discussed. Based on the above, a kind of diamond tool—dicing blade is selected to analyze the curing process of photopolymer bond diamond tools. An analytical model of curing process is developed and a correlation curve between the depth of polymerization of the photopolymer resin diamond tools and the exposure time to represent the curing process of photopolymer bond dicing blade. A test is done to proof-test the validity of the analytical model and the correlation curve. The simulated data fit the experimental results, which demonstrates the analytical models and numerical algorithm are of high reliability. The analytical simulation method could possibly be used to optimize the curing cycle and improve the quality of the photopolymers resin bond diamond tools.

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.

The Curing Process and Elastic Modulus of HTPB-Containing Polyurethanes

By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.

Kinetics of Autoclave Curing Process on Autoclaved Aerated Concrete with Magnetite Tailings

Lightweight and energy saving autoclaved aerated concrete(AAC) acting as a newbuilding material were prepared by using magnetite tailings from iron ore as main rawmaterials,and the purpose of comprehensive utilization of tailings resources was to improve their utilization efficiency.The effects of curing system on AAC product performance were discussed.The autoclave curing reaction kinetics was studied as well as the generated amount of hydration product trends over autoclave curing temperature and time were analyzed.The results indicated that the properties of AAC was in accordance with Chinese national standard the A3.5 B06 class of GB/T11968-2006 by prepared from magnetite tailing as the main rawmaterials.Meanwhile,autoclave curing process was controlled by the diffusion velocity through the products ' layers of reactants,and the apparent activation energy of autoclave curing process was 19.269 k J/mol.Compressive strength of aerated concrete is improved by mutual cementation between the appropriate amount of calcium silicate hydrate and tobermorite crystal.

Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process

In this investigation,a new silicone rubber-based MRE material was prepared to be used as a forming medium in manufacturing thin-walled complexshaped Ni-based tubes through the bulging process.Thus,it is significant to investigate the effect of magnetic field intensity,magnetic field loading time,and angle on the mechanical properties of the prepared MRE material during the curing process.The obtained results showed that increasing the magnetic field intensity during the curing process can improve the orientation of the chain structure in the elastomer matrix effectively.However,its mechanical properties are the best under the corresponding magnetic field intensity of 321 mT.Besides,by extending the magnetic field loading time in the curing process,the orientation of the chain structure was optimized,at the same time,the mechanical properties were also improved,and the best loading time is about 20–25 min.By changing the loading angle of the magnetic field during the curing process,the mechanical properties of the MRE were improved.When the loading angle of the magnetic field is 90°,the elastomer showed the best compression mechanical properties and excellent compression reversibility.Besides,for the anisotropic MRE material,the performance with magnetic compression is always better than that without magnetic compression.

An Investigation of Stimulating the Autoclave Curing Process of Resin Matrix/Fiber Reinforced Composite Material, Ⅰ: Process model

A mathematical model is made which describes the curing process of composites constructed from continuous fiber-reinforced, thermosetting resin matrix prepreg materials, and the consolidation of the composite is developed. The model provides the variation of temperature distribution, the cure reaction process in the resin, the resin flow and fibers stress inside the composite, and the void variation and the residual stress distribution. It can be used to illustrate the mechanism of curing process and optimize the cure cycle of composite material in order to ensure the quality of a product.

Experimental Study of Monitoring and Controlling of Composite Cure Process in Autoclave Featured with Fiber Optic Sensor

With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.

Curing mechanism of alkaline phenolic resin with organic ester

To study the curing mechanism of alkaline phenolic resin with organic ester, three esters were chosen to react with three systems - alkaline phenolic resin, potassium hydroxide aqueous solution containing phenol, and potassium hydroxide aqueous solution. The variations of pH, heat release and gel pH during the reactions were monitored and measured. Infrared spectroscopy （IR） and thermal gravity analysis （TG） techniques were used to characterize the curing reaction. It was found that organic ester is only partial y hydrolyzed and resin can be cured through organic ester hydrolysis process as wel as the reaction with redundant organic ester. The sequential curing mechanism of alkaline phenolic resin cured by organic ester was identified as fol ows： a portion of organic ester is firstly hydrolyzed owing to the effect of the strong alkaline; the gel is then formed after the pH decreases to about 10.8-10.88, meanwhile, the redundant organic ester （i.e. non-hydrolysis ester） starts the curing reaction with the resin. It has also been found that the curing rate depends on the hydrolysis velocity of organic ester. The faster the hydrolysis speed of the ester, the faster the curing rate of the resin.

典型复合材料结构固化变形仿真预测与控制验证

针对典型复合材料结构固化成型过程中变形难以控制的问题,本文对典型复合材料结构的固化变形进行仿真预测,从固化工艺和模具补偿两方面对固化变形加以控制和验证。固化工艺方面以各设计点变形数据为基础确定了最优固化工艺曲线,模具补偿方面提出了一种构件有限元模型自适应调整的方法,综合考虑固化工艺参数与模具型面补偿采用了一种基于全局补偿量的协同控制方法。结果表明,通过仿真模拟L形构件的固化变形误差为12.4%,借助响应面优化算法得到的L形构件最优固化工艺曲线其固化变形预测值与各试验设计点最大变形的最小值偏差不超过3.3%;T形加筋壁板有限元模型经自适应调整后,对于下表面与目标型面之间的偏差距离,数值模拟值与试验测量值的最大相对误差为17.20%。通过全局补偿量的协同控制方法对半筒形壁板的模具进行补偿,其固化变形最大值相比于传统单一模具型面补偿控制方法降低了接近90%。

彰显龙岩CB-1烟叶清甜蜜甜香型风格密集烘烤工艺研究

研究龙岩地区‘翠碧一号’的密集烘烤工艺,为彰显其清甜蜜甜香型风格提供参考。为彰显‘翠碧一号’烟叶清甜蜜甜香型风格,以福建龙岩烟区栽种‘翠碧一号’下、中、上部的适熟烟叶为实验材料,设置3种烘烤工艺,采用“背靠背”编烟方式编竿装烟,对烤后烟叶分别按下、中、上部进行分级,然后进行鉴定,统计外观、化学成分及感官质量等信息。结果显示,‘翠碧一号’(CB-1)品种烟叶下部烟宜采用T3(高温/高低高湿)烘烤工艺,关键烘烤阶段干/湿球温度为:变黄期38~40/37~38℃、凋萎期42/36℃、变筋期46/36℃、干片期50~54/38~39℃、干筋期60~65/40~42℃,中、上部烟叶宜采用T1(高温/高湿)烘烤工艺,关键烘烤阶段干/湿球温度为:变黄期38~40/37~38℃、凋萎期42/38℃、变筋期46/38℃、干片期50~54/39~40℃、干筋期60~65/40~42℃。该研究为彰显‘翠碧一号’香型的密集烘烤工艺提供技术参考。

整体化“E”形复合材料框成型工艺设计

随着航空先进复合材料应用愈发广泛,复合材料零件的形式逐渐增多,应用也愈发广泛,框是飞机的重要组成部分,常用作机身隔框或其他骨架零件,其直接影响着飞机的外形准确度和结构承载能力,“E”形复合材料框的巧妙设计和尝试提高了复合材料框的整体化水平,避免了金属框类零件难加工、疲劳性差等缺点,分析此“E”形复合材料框零件的结构特点,基于真空袋-热压罐成型方法,阐述了该类零件成型的工艺难点和关键控制点,巧妙设计成型工装方案,严格控制工艺操作流程,制造出内部质量好、外形尺寸精准、外观良好的复合材料“E”形框零件。

基于压电喷墨技术3D打印纳米银墨水的固化工艺研究

为了改善喷墨3D打印纳米银墨水的导电性,研究热台固化、近红外固化和光热耦合固化对纳米银墨水固化后微观形貌和电导率的影响。通过压电喷墨打印纳米银墨水,并用热台和近红外灯对纳米银薄膜进行固化。结果表明:热台固化时,纳米银薄膜的电阻率随固化时间和固化温度的升高而降低,在固化时间25 min,固化温度140℃时下降至99μΩ·cm;近红外固化时,固化功率1000 W,固化时间4 min的条件下,电阻率为33.2μΩ·cm;光热耦合固化时,纳米银薄膜的电阻率随扫描功率和固化时间的增加而降低,基板加热温度160℃、扫描功率为1000 W、固化时间60 s的条件下,电阻率为3.75μΩ·cm。光热耦合固化烧结颈的生长速度明显优于热固化及光固化。

2022年中国粉末涂料行业年度报告

以中国化工学会涂料涂装专业委员会和全国涂料工业信息中心的行业统计数据、国家统计局发布的数据及行业调研为基础,阐述了2022年我国粉末涂料行业运行概况,并提出了未来行业发展建议。