A method combining theoretical analysis with experiment is adopted and the flowing process of Ti-48A1-2Cr-2Nb alloy melt poured in a permanent mould during the centrifugal casting process has been analyzed. A mathemat...A method combining theoretical analysis with experiment is adopted and the flowing process of Ti-48A1-2Cr-2Nb alloy melt poured in a permanent mould during the centrifugal casting process has been analyzed. A mathematical model of the filling process is established and the forming mechanism of internal gaseous defect is summarized. The results of calculation show that the melt fills the mould with varying cross-section area and inclined angle. The filling speed of the cross-section is a function of filling time. The cross-section area is directly proportional to the filling speed and the inclined angle is inversely proportional to the filling speed at a given rotating speed of the platform. Both of them changes more obvious near the mould entrance. The gaseous defect can be formed in several ways and the centrifugal field has an important influence on the formation of the defect. In addition, the filling process in centrifugal field has been verified by wax experiments and the theoretical analysis are consistent with experimental results.展开更多
To overcome cartilage injury, strategies have been developed in the last few years based on tissue engineering to rebuild the defects. Cartilage engineering is principally based on three main biological factors: cells...To overcome cartilage injury, strategies have been developed in the last few years based on tissue engineering to rebuild the defects. Cartilage engineering is principally based on three main biological factors: cells (native cells (chondrocytes) or a more primitive ones as mesenchymal stem cells), scaffolds and functionalization factors (growth factors, mechanical stimulation and/or hypoxia). Cartilage tissue engineering strategies generally result in homogeneous tissue structures with little resemblance to native zonal organization of articular cartilage. The main objective of our work concerns the buildup of complex biomaterials aimed at reconstructing biological tissue with three dimensional cells construction for mimicking cartilage architecture. Our strategy is based on structures formation by simple and progressive spraying of mixed alginate hydrogel and human mesenchymal stem cells (hMSC). In this work, the comportment of cells and more precisely their chondrogenic differentiation potential is compared to a traditional making process: the mold. We report here that spraying method allowed to product a scaffold with hMSC that confer a favorable environment for neocartilage construction.展开更多
Porous calcium phosphate ceramics were prepared by slip casting and molding method respectively. By these two different methods, different microstructures can be got. By slip casting method, the pore size was 100- 35...Porous calcium phosphate ceramics were prepared by slip casting and molding method respectively. By these two different methods, different microstructures can be got. By slip casting method, the pore size was 100- 350μm and 20- 80 μm ; pores were opened, interconnected and ball-like ; the grain size was 2-4μm. By molding method, the pore size wus 100-500μm and 1- 10μm ; the grain size was 2- 8μm. By slip casting method regalar and interconnected pores can be gnt. By molding method the porosity and strength can be adjusted easily.展开更多
To model a true three-dimensional(3D)display system,we introduced the method of voxel molding to obtain the stereoscopic imaging space of the system.For the distribution of each voxel,we proposed a four-dimensional(4D...To model a true three-dimensional(3D)display system,we introduced the method of voxel molding to obtain the stereoscopic imaging space of the system.For the distribution of each voxel,we proposed a four-dimensional(4D)Givone–Roessor(GR)model for state-space representation—that is,we established a local state-space model with the 3D position and one-dimensional time coordi-nates to describe the system.First,we extended the original elementary operation approach to a 4D condition and proposed the implementation steps of the realiza-tion matrix of the 4D GR model.Then,we described the working process of a true 3D display system,analyzed its real-time performance,introduced the fixed-point quantization model to simplify the system matrix,and derived the conditions for the global asymptotic stability of the system after quantization.Finally,we provided an example to prove the true 3D display system’s feasibility by simulation.The GR-model-representation method and its implementation steps proposed in this paper simplified the system’s mathematical expression and facilitated the microcon-troller software implementation.Real-time and stability analyses can be used widely to analyze and design true 3D display systems.展开更多
文摘A method combining theoretical analysis with experiment is adopted and the flowing process of Ti-48A1-2Cr-2Nb alloy melt poured in a permanent mould during the centrifugal casting process has been analyzed. A mathematical model of the filling process is established and the forming mechanism of internal gaseous defect is summarized. The results of calculation show that the melt fills the mould with varying cross-section area and inclined angle. The filling speed of the cross-section is a function of filling time. The cross-section area is directly proportional to the filling speed and the inclined angle is inversely proportional to the filling speed at a given rotating speed of the platform. Both of them changes more obvious near the mould entrance. The gaseous defect can be formed in several ways and the centrifugal field has an important influence on the formation of the defect. In addition, the filling process in centrifugal field has been verified by wax experiments and the theoretical analysis are consistent with experimental results.
文摘To overcome cartilage injury, strategies have been developed in the last few years based on tissue engineering to rebuild the defects. Cartilage engineering is principally based on three main biological factors: cells (native cells (chondrocytes) or a more primitive ones as mesenchymal stem cells), scaffolds and functionalization factors (growth factors, mechanical stimulation and/or hypoxia). Cartilage tissue engineering strategies generally result in homogeneous tissue structures with little resemblance to native zonal organization of articular cartilage. The main objective of our work concerns the buildup of complex biomaterials aimed at reconstructing biological tissue with three dimensional cells construction for mimicking cartilage architecture. Our strategy is based on structures formation by simple and progressive spraying of mixed alginate hydrogel and human mesenchymal stem cells (hMSC). In this work, the comportment of cells and more precisely their chondrogenic differentiation potential is compared to a traditional making process: the mold. We report here that spraying method allowed to product a scaffold with hMSC that confer a favorable environment for neocartilage construction.
文摘Porous calcium phosphate ceramics were prepared by slip casting and molding method respectively. By these two different methods, different microstructures can be got. By slip casting method, the pore size was 100- 350μm and 20- 80 μm ; pores were opened, interconnected and ball-like ; the grain size was 2-4μm. By molding method, the pore size wus 100-500μm and 1- 10μm ; the grain size was 2- 8μm. By slip casting method regalar and interconnected pores can be gnt. By molding method the porosity and strength can be adjusted easily.
基金This work was supported by the Key Research and Development Projects of Science and Technology Development Plan of Jilin Provincial Department of Science and Technology(20180201090gx).
文摘To model a true three-dimensional(3D)display system,we introduced the method of voxel molding to obtain the stereoscopic imaging space of the system.For the distribution of each voxel,we proposed a four-dimensional(4D)Givone–Roessor(GR)model for state-space representation—that is,we established a local state-space model with the 3D position and one-dimensional time coordi-nates to describe the system.First,we extended the original elementary operation approach to a 4D condition and proposed the implementation steps of the realiza-tion matrix of the 4D GR model.Then,we described the working process of a true 3D display system,analyzed its real-time performance,introduced the fixed-point quantization model to simplify the system matrix,and derived the conditions for the global asymptotic stability of the system after quantization.Finally,we provided an example to prove the true 3D display system’s feasibility by simulation.The GR-model-representation method and its implementation steps proposed in this paper simplified the system’s mathematical expression and facilitated the microcon-troller software implementation.Real-time and stability analyses can be used widely to analyze and design true 3D display systems.
