Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.

Effects of low molecular weight polysaccharide from Sargassum thunbergii against palmitic acid-induced intracellular lipid accumulation in 3T3-L1 adipocyte and HepG2 cells

Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.

Analysis of Molecular Weight Distribution and Antioxidant Activities of Cirrhinus molitorella Skin Collagen Hydrolysates

[Objective] The aim of this work was to identify molecular weight （MW） distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spec-trometry （MALDI-TOF-MS）. Fish skin were treated by the alkaline protease 2709. [Result] The optional conditions for hyerolysis were time 3 h, temperature 55 ℃, pH 10.0, substrate concentration 80 g/L and E/S 4%. The results of both methods indi-cated that the molecular weight of col agen hydrolysates was from 400 to 1 800 Da, and the peptides’ molecular weight was less than 1 400 Da mostly. The reducing power and antioxidant/radical scavenging activity [1, 1-diphenyl-2-picryl-hydrazyl （DPPH） free radical scavenging activity] were determined. [Conclusion] The results reveal that the fishskin hydrolysate is a potential source of antioxidants.

Study on Enzymatic Hydrolysis of Gadus morrhua Skin Collagen and Molecular Weight Distribution of Hydrolysates

Process parameters on enzymatic hydrolysis and molecular weight （MW） distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor and orthogonal experiments. The molecular weight distribution of hydrolysates was determined using both Sephadex G25 partition and high speed liquid chromatography electricity spray mass spectrum （HPLC-ESI-MS）. Collagen hydrolysates were first gained by an alkaline protease ＂alcalase＂ for 3 h at temperature （50~C）, pH （10.0）, substrate concentration （75 g L-~）, and E/S （3%）. The molecular weight distribution of collagen hydrolysates ranged from 300 to 1 500 Da, and most of peptides were under 1 200 Da. Sephadex G25 partition and HPLC-ESI-MS should be successfully employed to determine the molecular weight distribution of collagen hydrolysates.

A HIGHLY ACTIVE NEODYMIUM CHLORIDE ISOPROPANOL COMPLEX/MODIFIED METHYLALUMINOXANE CATALYST FOR PREPARING POLYISOPRENE WITH HIGH CIS-1,4 STEREOSPECIFICITY AND NARROW MOLECULAR WEIGHT DISTRIBUTION

Neodymium chloride isopropanol complex （NdCl3.3＇prOH） activated by modified methylaluminoxane （MMAO） was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum （Al） compounds, [Al]/[Nd] ratio, polymerization temperature and time. NdCl3＇3iprOH exhibited high activity producing polymers feasting high cis-l,4 stereospecificity （〉 96%）, very high molecular weight （Mn 〉 1.0 × 10^6） and fairly narrow molecular weight distribution （MWD, Mw/Mn 〈 2.0） simultaneously. In comparison, neodymium isopropoxide also showed high activity providing polymers with narrow MWD （Mw/Mn = 2.07）, but somewhat low cis-1,4 content （ca. 92%）, while neodymium chloride had no activity under present polymerization conditions. The Al compounds affected the polymer yield in the order of Al（i-Bu）3 〉 MMAO 〉 Al（i-Bu）2H. MMAO as cocatalyst afforded polyisoprene with high Mn over 1.0 × 10^6, whereas as stronger chain transfer agent than MMAO, AI（i-Bu）3 and AI（i-Bu）EH yielded polymers with low Mn （1.0 × 10^5-8.0 × 10^5）. NdCl3·3＇PrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low [Al]/[Nd] ratio of 30, and the produced polymer remained high cis-1,4 content of 95.8% along with high Mn over 1.0× 10^6 even at elevated temperatures up to 70℃. The polymerization rate is of the first order with respect to the concentration of isoprene. The mechanism of active species formation was discussed preliminarily.

Molecular Weight Distribution of Dissolved Organic Matter in Lake Hongfeng Determined by High Performance Size Exclusion Chromatography (HPSEC) With On-Line UV-Vis Absorbance and Fluorescence Detection

The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluorescence detection. The elution curves obtained by absorbance and fluorescence techniques expressed similar patterns, with the exception of diminishing of large fraction and the peaks behind several seconds in fluorescence chromatograms. According to its molecular weight (MW), DOM in water samples is divided into several fractions: large ({>3.5} kDa); medium-large ({3.5}-{2.0} kDa); medium ({2.0}-{1.0} kDa) and small ({<1.0} kDa). The average molecular weight was calculated using the elution curve detected by UV-vis absorbance and fluorescence detection techniques. The results showed that the weight-average molecular weight (Mw) and number-average molecular weight (Mn) calculated by UV-vis absorbance techniques range from 1750 to 2050 Dalton and from 1450 to 1850 Dalton, respectively. And the Mw and Mn obtained by fluorescence detection are lower by 50 to 400 Dalton. As a reference, the molecular weight of Fluka humic acid (FHA) is larger than that of water samples by about 200 Dalton. The average molecular weight of DOM for water samples collected in March and July was compared. The results revealed that the molecular weight is lower for water samples obtained in July than that obtained in March, indicating the ambient environment has an influence on the molecular weight, including photo-degradation and biological activity.

Characteristics and distribution of low molecular weight organic acids in the sediment porewaters in Bosten Lake, China

The composition and vertical profiles of low molecular-weight organic acids （LMWOAs） and the contribution of them to dissolved organic matter （DOM） in sediment porewaters in Bosten Lake, Xinjiang, China were investigated. The results showed that total concentration of LMWOAs was up to 94.5 μmol/L and their proportion in DOM was 5.6%, suggesting that LMWOAs were important chemical components in DOM in lake sediment porewaters. Among the seven LMWOAs, pyruvic and acetic acid had the highest concentrations with 26.30 and 8.31 μmol/L, accounting for 51.4% and 14.92% of LMWOAs, respectively. Trifluoroacetic and sorbic acid had the lowest concentrations, indicating that the compositions of LMWOAs in relative reducing environments were largely different from those reported in glacier, atmosphere and soils. The concentrations of lactic, acetic, formic, sorbic and oxalic acid decreased with increasing depth, probably relating to stronger microbial activities in the initial stage of early diagenesis. Trifluoroacetic acid was mainly anthropogenic with its concentration, showing a diusive trend from the surface to bottom sediments. The concentrations of lactic acid and nitrate generally showed a consistent profile. The increasing concentration of pyruvic acid in the vertical profile was just opposite to that of sulfate, revealing a significant negative relationship between them. Oxalic acid remained constant except for an obvious peak at 6 cm depth. The results indicated the diversities in sources and behaviors for various LMWOAs during early diagenesis in sediments.

SUPPORTED ZIEGLER-NATTA CATALYSTS FOR ETHYLENE SLURRY POLYMERIZATION AND CONTROL OF MOLECULAR WEIGHT DISTRIBUTION OF POLYETHYLENE

The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...

Molecular Weight and Distribution of Cellulose and Cellulose Microspheres

[ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with viscosity method and gel permeation chromatography （GPC） method. [ Method] In viscosity method, cadmium ethylenediamine was used as the solvent, intrinsic viscosity η of the solution was determined at 25 ℃ by using a Ubbelohde viscometer, to calculate the molecular weight of cellulose; in GPC method, 8% LiC1 / N, N-dimethylacetamide （LiC1/DMAc） was used as the solvent and 0.5% LiC1/DMAc was used as the mobile phase to determine the relative molecular weight and distribution of cellulose and cellulose microspheres. In addition, the determination results were analyzed to compare these two methods. [ Result ] Viscosity-average molecular weight Mr/ of cellulose and cellulose microspheres determined with viscosity method were 224,532 and 16,686, respectively; weight-average molecular weight Mw of cellulose and cellulose microspheres determined with GPC method were 284,196 and 22,345, respectively. [ Conclusion] The determination results of （;PC method are relatively close to the actual value and could truly reflect the characteristics of molecular weialat distribution of eellulose and cellulose mierosr, heres.

RHEOLOGICAL BEHAVIOR OF POLYMER MELTS (Ⅱ) MULTIPLE ENTANGLEMENT MODEL FOR PREDICTING THE DEPENDENCE OF VISCOELASTIC BEHAVIOR ON DEFORMATION STATE AND PRIMARY MOLECULAR WEIGHTS AND THEIR DISTRIBUTION

In accordance with the memory function of Gaussian chain constraints in entangled polymermelts a set of material functions related to a certain"test flow"are formulated from the O-W-Ftype constitutive equation by the appropriate selection of the Cauchy-Green and Finger tensors.Thedependences of these material functions on the strain rate and the dependences of the linearviscoelastic functions on the primary molecular weight distribution and the entanglement sites sequencedistribution on polymer chain are derived from a multiple-entanglement model and a couple of mech-anisms of relaxation for the loop and terminal entanglement sites.When the primary polymer chainsare modelled with the Lansing-Kraemer molecular distribution function,a set of new relationshipsamong linear viscoelastic functions(η0,ψ100,ηext0 and τ1)and the molecular weights and their distributionare formulated.These functions and relationships are verified with experimental data.

THE RELATION OF SEQUENCE DISTRIBUTIONS OF S-SBR TO ITS MOLECULAR WEIGHT DISTRIBUTIONS

The relationship between sequence distributions and molecular weight distributions of S-SBR, obtained from styrene and butadiene anionic copolymerization at various conversions with THF/Li^+ as an initiator has been studied by ^(13)C-NMR,GPC. The results showed that the molecular weight distributions of the copolymer couldbe correlated sophisticatedly to the binary sequcne distributions or the monomer unit distributions of the copolymer in a corrected Poisson's distribution from.

Molecular Weight Distribution of Polystyrene Produced in a Starved Feed Reactor

A starved feed reactor (SFR) is a semi-batch polymerization reactor where initiator and monomer are fed slowly into a fixed amount of solvent. The polymerization is carried out isothermally at elevated temperatures. The added initiator decomposes instantaneously and the added monomer polymerizes immediately. The molecular weight (MW) and molecular weight distribution (MWD) of the product polymer can be effectively controlled by the feed ratio of monomer to initiator. This paper presents a study on the MWD of styrene polymerization in a SFR. The MWD model parameters are regressed with experimental data. Although the solids fraction in the SFR is high (higher than 50%), viscosity is not too high and the 'gel effect' is weak due to the low molecular weight of the products. It is found that the termination rate constant is a power function of molecular weight, radicals terminate via 100% combination, the thermal initiation can be neglected even at high reaction temperature studied. And calculated results indicate that in the SFR, the validity of the long chain assumption becomes doubted. It appears that other alterative assumption should be found for an improved model.

Lumped Time Distribution Function of Dynamic Equilibrium System and Its Application in Calculating Molecular Weight Distribution of Polymer

The lumped time distribution functions were proposed, which can be used for describing the dynamicsystems with two or more than two states of the end of growing polymer chain during chain addition polymerization.Numerical analysis of the lumped time distribution functions was carried out. The method for calculating molecularweight distribution of polymer in the stable free radical polymerization and more general cases was developed basedon the lumped time distribution functions.

Molecular Weight Distributions of Cotton Cellulose Treated with a Polycarboxylic Acid at Different pH

In last paper, the average molecular weight of a control cotton fabric and cotton fabrics treated with the polycarboxylic acid at different pH were measured. The result doesnt support the hypothesis that the pH of the finishing bath can affect the depolymerization of the finished cotton fabric. In order to understand more about it, the molecular weight distributions of the control and finished cotton fabrics were measured and the reason was fund. From the ratio and the molecular weight of the low molecular part one can see that the pH of the finishing bath can affect the depolymerization of the finished cotton fabrics. The phenomenon that the average molecular weights of the cotton fabric crosslinked with BTCA at different pH are almost same is attributed to that the crosslinks are not broken completely when treated with 0.5 M NaOH solution at 50℃ for 144 h.

New Indoor Accelerated Weathering Condition for Approximating Molecular Weight Distribution of Outdoor-Exposed LDPE

LDPE （low-density polyethylene） photo degraded through various accelerated weathering tests has the molecular weight distribution curves unlike that through outdoor exposure. The authors therefore developed new weathering test condition based on the existing accelerated weathering test using a xenon arc lamp. Samples of LDPE were photo degraded using various accelerated weathering test conditions and outdoor exposure. The physical properties and chemical structures of the photo degraded samples were studied through a tensile test, infrared spectroscopy, and gel chromatography. The authors found that the molecular weight distribution curve of a sample photo degraded using a xenon lamp at a higher BPT （black panel temperature） （73 ~C） was more similar to that of an outdoor-exposed sample than that of a sample photo degraded at the standard BPT （63 ~C）. It is considered that higher temperature accelerates radical recombination, consequently recreating molecular enlargement similar to the outdoor-exposed sample. Multiple regression analysis using newly introduced Mp （peak-top molecular weight） and Mw （weight-average molecular weight） as explanatory variables was conducted, which successfully enabled the authors to provide a simple explanation for the decrease in polymer tensile strength.

Effect of Temperature on the Molecular Weight Distribution in the Different Ranks of Coal during the On-Line Investigation of Coal Pyrolysis Gas Using Direct Photoionization Mass Spectroscopy

Coal pyrolysis gas from different ranks of coal was monitored on real time basis using photoionization mass spectroscopy. The molecular weight distribution of different products as a function of temperature from various coal ranks studied was observed. It was noted that the release of different classes of compounds like phenols, alkenes, alkylated aromatics and aromatic skeletons was temperature dependent. For all the coal ranks at lower temperatures phenols were the main component, with alkenes and alkylated aromatics at slight higher temperatures and aromatic skeletons were released at the highest temperatures studied.

Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene

In this study, the relationship between skin structure and shear strength distribution of thin-wall injection molded polypropylene (PP) molded at different molecular weight and molecular distribution was investigated. Skin-core structure, cross-sectional morphology, crystallinity, crystal orientation, crystal morphology and molecular orientation were evaluated by using polarized optical microscope, differential scanning calorimeter, X-ray spectroscopic analyzer and laser Raman spectroscopy, respectively, while the shear strength distribution was investigated using a micro cutting method called SAICAS (Surface And Interfacial Cutting Analysis System). The results indicated that the difference of molecular weight and molecular weight distribution showed own skin layer thickness. Especially, high molecular weight sample showed thicker layer of the lamellar orientation and molecular orientation than low molecular weight sample. In addition, wide molecular distribution sample showed large crystal orientation layer.

In vivo biodistribution of topical low molecular weight heparin-taurocholate in a neovascularized mouse cornea

AIM： To investigate the ocular biodistribution and clearance of topically administered 7-taurocholic acid conjugated low-molecular weight heparin（LHT7） in a neovascularized mouse cornea using an in vivo optical imaging system. METHODS： A total of 10 eyes of 6 to 8-week-old BALB/c mice were analyzed. Corneal neovascularization（CoNV） was induced in the inferior cornea（IC） of each animal by penetrating the stroma with two interrupted sutures. The development of CoNV was verified after one week and the area of each neovascularized region was measured. A near-infrared fluorescent probe of 20 μmol/L Cy5.5 labeled LHT7（LHT7-Cy5.5） in 0.02 mL solution was topically instilled onto the cornea in the experimental group（n=5）. Free-Cy5.5 of 20 μmol/L in 0.02 mL was instilled in the control group（n=5）. In vivo optical images were obtained before instillation and 5 min, 2, 4, and 6 h after instillation. The intensities were separately measured at the superior cornea（SC） and the IC. RESULTS： The mean CoNV areas were 1.97±0.17 mm^2 and 1.92±0.96 mm^2 in the experimental and control groups, respectively（P=0.832）. The SC remained normal in all 10 subject animals. The IC intensity of the LHT7-Cy5.5 was greater than the SC intensity at 5 min（P=0.038）, 2 h（P=0.041）, and 4 h（P=0.041） after application. The IC intensity fell to less than half of its initial value（42.9%±8.6%） at 6 h in the experimental group. In the control mice, here were no significant differences in the free-Cy5.5 intensity between the IC and SC. CONCLUSION： Topically administered LHT7 shows a high biodistribution in CoNV areas for 4 h and should be reapplied accordingly to maintain its effects. In vivo optical imaging can be a useful tool for evaluating the ocular biodistribution of a drug in an animal model.

The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution

Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-core structure affects the property of completed injection molding parts (bulk property) even if in thin-wall injection molding. However, there is a few research about the relationship between bulk property and internal property distribution in the injection molding specimen. In this study, thin-wall injection molded parts of polypropylene (PP) were prepared by 4 different molecular weight and molecular weight distribution to reveal the relationship between bulk property and property distribution. These characteristics were investigated by using tensile test, fracture toughness characterized by Essential Work of Fracture (EWF) method for bulk property and film tensile test by sliced sample for tensile property distribution. The property distribution test results revealed that the highly bulk property sample had thicker highly mechanical property layer on its surface.

Pharmacokinetics of fucoidan and low molecular weight fucoidan from Saccharina japonica after oral administration to mice

The brown seaweed,Sacchairna japonica,has been used in traditional Chinese medicine for over one thousand years.Oral administration of fucoidan or low molecular weight fucoidan(LMWF)from S.japonica could ameliorate kidney dysfunction in chronic kidney diseases and inhibit diabetic vascular complications.In many studies,LMWF was found to be more potent than fucoidan with high molecular weight.However,the pharmacokinetics of LMWF still remains unclear.The purpose of the research is to compare the pharmacokinetics of fucoidan with high molecular weight(136 kDa)with that low molecular weight(9.5 kDa)after oral administration to ICR mice.Since fucose is the main and representative monosaccharide of fucoidans,we evaluate the pharmacokinetics of fucoidan and LMWF by determining the fucose concentration in mice serum.Both fucoidan and LMWF were absorbed following oral administration.Fucoidan and LMWF were provided to mice by oral administration with 60 mg/kg and the maximum Concentration(C_(max))was found at 2.5 h(0.66±0.32 mg/L)for Fucoidan and 1.5 h(1.01±0.56 mg/L)for LMWF,respectively.It seems that LMWF had a higher area under the curve(AUC_(0–t))and was absorbed more quickly than fucoidan.The estimated bioavailability of LMWF was28.3%in the mice treated with a single dose of 30 mg/kg.In addition,LMWF was found widely spreaded into different tissues following oral administration and the highest concentration was found in kidney at 19.93±7.02μg/g.In this study,we first studied the pharmacokinetics of LMWF,in order to help to understand the function of LMWF.And our results shed light on the potential of development of drugs based on LMWF.